Page 1
Features
• High-performance
cable support system
offering unprecedented
installation flexibility
• Continuous cable
support spacing, from
3 inches to 5 feet on
horizontal or vertical
runs
• Convenient pathway
for wires and cables
• Specially designed
U-Hooks and double
J-Hooks have largediameter, rounded
support surfaces/edges
to avoid over-bending
and kinking of cables
• U-Hooks are available
in a range of sizes
and combinations for
different cable capacity
needs
CAT-CM
Cable Support System
Rod-Mounted Option
The Rod-Mounted Option allows for field assembly of
the hooks onto All-Thread Rod. Benefits include:
•
Customized intervals between hooks to comply with
the TIA 569 standard as well as ISO/IEC 18010
•
Easy level changes - under or over ductwork, piping,
etc. - no level change fittings necessary
•
Direct attachment to the ceiling or building structure
with threaded rod and CADDY®Fasteners
Cantilever-Mounted Option
The Cantilever-Mounted Option consists of U-Hooks
being mounted with brackets to walls and columns.
This option allows for:
•
Cable runs along walls
•
Mounting of cabling within existing column grid
•
Placement of individual hook spacing and
elevation as needed
Strut-Mounted Option
The Strut-Mounted Option is accomplished by
assem-
bling the hooks to strut for a cost-effective
alternative to
center rail cable tray and wire basket systems. The
Strut-Mounted Option:
•
Utilizes standard strut which is readily available and
provides a rigid installation
•
Has sheet-metal U-hooks (rungs) with specially
designed quick-attach strut fasteners for virtually
any half-slot strut
•
Allows for customized support spacing
•
Has fittings for horizontal and vertical change of
direction - simplifying angle and level changes
•
Offers optional rollers and retainers on the U-Hooks
to retain cables and support cable pulls
•
Has protective tubes for the threaded rod to eliminate
scraping and cutting of cable sheath during pulling
•
Permits hooks to be mounted on a base (e.g., Pipe
Pier
TM
in raised floor applications) allowing for a
large amount of cables to be organized and neatly
routed
1
2
3
Three Installation Options
The CAT-CM system offers three installation options that can be easily combined –
resulting in installation flexibility
to meet every need.
Pipe Pier is a trademark of Pipe Pier Inc.
For a download
of the CAT-CM Design Tool,
visit the ERICO website at:
www.erico.com
Page 2
F428S F359LT03 00740M3
Phone: 800-853-0878
Fax: 800-462-4797
www.erico.com
Copyright ©2003 ERICO International Corporation. All rights reserved.
CADDY, CADWELD, CRITEC, ERICO, ERITECH, ERIFLEX, and LENTON are registered trademarks of ERICO International Corporation.
CAT-CM
Cable Support System
UPC# Catalog # Description Figure#
782856
46498 CAT100CM Double J-Hook 1
46486 CAT200CM U-Hook 200 mm/8” with T-nut* 2
46489 CAT200CMLN U-Hook 200 mm/8” less nut 2
46485 CAT300CM U-Hook 300 mm/12” with T-nut* 3
46490 CAT300CMLN U-Hook 300 mm/12” less nut 3
46488 CATLCCM Level-change Swivel Bracket 4
46915 CATSLTCM Same-level Swivel Bracket 5
46487 CATSLCM Same-level Tee Swivel Bracket 6
46916 CATSLXCM Same-level X Bracket 7
46493 CATRL200CM Roller 200 mm/8” (incl. rod & nuts) 8
46494 CATRL300CM Roller 300 mm/12” (incl. rod & nuts) 9
47335 CATGRDCM Grounding Connector 10
46496 CATRT200CM Wire Retainer 200 mm/8” 11
46495 CATRT300CM Wire Retainer 300 mm/12” 12
46497 CATTBCM Protection Tube 13
46491 CATSPCM Strut Support Plate 14
47336 CATWMCM Wall Bracket 15
*Quick-Attach T-nut for HALF SLOT Strut
Cable Capacity Chart
Cable CAT100CM CAT100CM CAT200CM CAT200CMLN CAT300CM CAT300CMLN
on strut on rod on strut on rod or on strut on rod or
cantilever cantilever
4-pair UTP, Cat 5/5e 50 80 320 500 480 750
4-pair UTP, Cat 6 32 50 200 315 300 470
4-pair ScTP/FTP 24 40 160 250 240 375
4-pair STP 16 26 110 170 160 250
Strut Mount
Rod Mount
Cantilever Mount
3
12
3
13
14
11
2
4
5
13
1
6
10
3
12
8
9
9
15
8
7
Loading...