Cadco TG450 Installation Manual
Heat Plates
Convection Oven Accessories
Guidelines & Suggestions
MODELS TG320 & TG450
TG320
Half Size
TG450
Full Size
Cadco, Ltd.
145 Colebrook River Road, Winsted, CT 06098
l
860-738-2500
E-mail: info@cadco-ltd.com
4
1/30/2009 RV00
Fax 860-738-9772
l
Website: www.cadco-ltd.com
Congratulations on your purchase of a Cadco Heat Plate!
Non-stick
Baking surface
The Cadco Oven Heat Plate is designed to help expand the
use and range of your Cadco convection oven. The Heat Plate
is designed for direct application of product. Place everything
from pizzas to open face sandwiches directly on the plate. The
plate will also help in maintaining the cavity temperature for
fast recovery times. The Cadco Heat Plate is not a traditional
pizza stone. It is a non-porous aluminum plate, this allows
you to set pizza crust like a stone, but allows for nothing to
stick to the surface.
Placement: Depending on the oven model, the Cadco Oven
Heat Plate can be placed on any one of the racks. Multiple
plates can be placed in the cavity to accommodate the amount
of product needed during busier times.
Burls on the lower
surface of the plate
intensify the heat
The most popular placement of the Cadco Heat Plate is on the
lowest rack. This way it can stay in the oven and is ready to
use at anytime. The other racks remain open for sheet pan or
Oven Basket placement.
Care Instructions: The heat plate is Teflon® coated. This
means that cleaning can be done with detergent and water.
Not use an abrasive, this will compromise the durability of the
Teflon® coating.
Use caution before removing the plate for cleaning. The
plate will retain heat long after the oven has been shut
down.
2
3
Do
Loading...