Cadco OV-500 User Manual

Cadco, Ltd.

Specialists in Countertop Convection Ovens

IMPORTANT NOTE

Cadco OV-500 & OV-600 Pan Runner Rack Washer Adjustment

(to adjust pan runners to fit your pan length)

If using full size sheet pans without using optional shelves, you may need to adjust
the pan runner racks to accomodate slight variations of length in different brands
of sheet pans.
To tighten pan runner racks if pan fit is too loose:

1) Unscrew the knob holding pan runner rack to oven wall. (Fig. 1)

2) Pull pan runner rack away from wall slightly, and position a washer (provided)
between pan runner rack and oven wall, in the position shown. (Fig. 2)

3) Screw the knob back into the oven wall to hold the washer and pan runner rack.

(Inside left oven wall
of OV-500 shown)

pan
runner
rack

Fig. 1

screw hole in
oven wall

washer

knob

knob

Fig. 2

pan runner rack

1/23/2002 RV01

For more information, please contact Cadco, Ltd, 145 Colebrook River Road, Winsted, CT 06098

Tel. [phone] u Fax [phone] u E-mail: [e-mail] u Web site: www.cadco-ltd.com