Cadco CPG-10F User Manual

Cadco, Ltd.

Glass-Ceramic

Panini Grills

Models CPG-10, CPG-10F,

CPG-20 & CPG-20F

Use and Care Guidelines

Before You Use Your Panini Grill

Remove the protective film

Carefully remove all the protective film from the external walls of your new Panini
Grill. Be sure not to leave any residue on the stainless steel surface. If there should be
any residue, it may be removed with any stainless steel cleaner.

Notes For Use

Before using the Cadco Panini Grill for the first time it should be “Burned In”. First,
wash the ceramic surface with soap and water then dry it thoroughly. To “Burn In”
your Panini Grill, simply set the temperature to 450ºF and let it run for 30 minutes
with the top open. Now you are ready to start cooking.

Warning!

very high temperatures. Follow all safety procedures to avoid
injury.

Never touch the grilling surface while the power is on or the
cooking surface is hot. (With our Safety Touch design, when the cooking surface is
700ºF, the exterior of the Panini Grill is only 150ºF.)

Never use pots and pans on the glass surface. The grill surface was designed to cook
food, not to heat pots.

Never place foil or plastic on the grill surface.

Use only heat-resistant utensils on your Panini Grill.

Use the handle to raise and lower the top of the Panini Grill to avoid injury.

You have a one year parts and labor warranty on your new glass-ceramic appliance;
keep it valid. Your Panini Grill was designed to prepare food, don’t abuse it by using
it for any other purpose.

The Cadco, Ltd. Panini Grill is capable of reaching

2