© 2016 Cadac Holdings Ltd. Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed.
DOC02-Waves Effects - Issue A - Feb 2016
Cadac Holdings Limited
One New Street
Luton
Bedfordshire
LU1 5DX
England
Tel: +44 1582 404 202
Email: support@cadac-sound.com
www.cadac-sound.com
Instructions for use of Waves ‘Effects’ plug-ins with a
Cadac CDC six and CDC eight mixing console
Waves Effects
DOC02-Waves Effects - Issue A - Feb 2016
Introduction
These instructions are intended to cover one scenario using Waves on the CDC eight or six:
AIM: To demonstrate the use of Waves Effects plug-ins.
The CDC six (CDC eight) will act as our ‘Waves controller’ rather than an external PC or MAC.
The CDC six will run Waves MultiRack SoundGrid software. It is assumed that the console has
already been installed with this). Separate instructions are however available describing this software
install process: Quick Reference Guide: Installing Waves on a CDC six or CDC eight.
Any test audio will be supplied to and from the console via a CDC I/O rack.
Ethernet
CDC eight / CDC six running
MultiRack SoundGrid
MegaCOMMS
RG6 coaxial cables
Audio in - XLR
Audio out - XLR
Audio Source
Waves SoundGrid
Server
CDC I/O stage box
Audio Monitor
DOC02-Waves Effects - Issue A - Feb 2016
Equipment
Equipment:
CDC eight or six consoles with Waves audio card fitted
Cat5e/6 cable
Waves licence (on USB memory stick) to cover MultiRack SoundGrid
USB mouse / Keyboard
Optional: Only required for sourcing / monitoring audio to / from the console:
CDC I/O 6448 or CDC I/O 3216 stage rack
Audio source
Audio speaker
Waves SoundGrid Server
The example above shows the Waves SoundGrid Server One
DOC02-Waves Effects - Issue A - Feb 2016
Set-up
Attach the CDC six (or CDC eight) to the Waves SoundGrid server using single Cat6 cable – CDC six
shown below..
Any of port - 1, 2 or 3 - may be used to connect to the SoundGrid server.
Connect CDC I/O stage rack to the console using RG6 coaxial cables for the MegaCOMMS network
Connect the audio source to an input on the CDC I/O stage rack
Connect speaker to an output on the CDC I/O stage rack
Waves SoundGrid Server One
Ethernet connection
Cadac CDC six
Ethernet connection
DOC02-Waves Effects - Issue A - Feb 2016
Software Instructions
There are two separate aspects to this.
CDC six Waves Software
This consists of a program called ‘MultiRack SoundGrid’.
This can be run on a separate laptop to the console, however, for normal stand-alone operation it is
run on the console.
This software may be started from the console menu system as follows:
Important: A licence dongle must be inserted into the console to run this software (highlighted in red
below).
Consider the system window, as follows:
DOC02-Waves Effects - Issue A - Feb 2016
Select the ‘Menu’ button, above and to the left of the screen (highlighted in red):
Select ’User Options’ on the touch screen:
Loading...