Cactus X2GO User Manual
User Manual
www.cactuswatches.com
IOS 8.0 & Above Android 4.4 & Above Supports Bluetooth 4.0
SOFTWARE COMPATIBILITY
X2Go
iOS 8.0 & Above Android4.4 & Above Support Bluetooth4.0
01
Setting
Use VeryFitPro App on IOS or Android smart phone to
set the X2GO as follows:
Note: hardware and system of devices should meet the
below requirements:
1. Download VeryFitPro
Search and download “VeryFitPro” from
the Apple Store or Android App store
Scan the QR code and download
Note: If you have a problem with scanning the QR code,
please copy the link & open it in your web browser
The red indicator is
on during charging
02
1 2
3 4
2. Product Activation & Installtion
Before using your CACTUS X2GO ensure that it is fully
charged. When it is fully charged, it will automatically
power on.
Detach the band: pull o the strap (on both sides) of the
device body.
Charge the battery: Insert the chip-mounted end of the
device body into the USB interface to activate the product
by charging (be cautious not to reverse the polarity, and to
comply with the required voltage and current: 5V /
500mA)
When inserted in the correct position to charge, a red light
will come on. When fully charged (battery image will show
full charge) attach both bands to the device.
You are now ready to wear the CACTUS X2GO – adjust the
length of the band and fasten the device around your
wrist.
03
Add Device
Detection failed,please re search
ID115Plus Color HR
3. Touch key
Single click the touch key:
Interface switch
Press and hold touch key:
Enter
Make sure Bluetooth is ON in your smart phone,
and open the VeryFitPro app on your smart
phone.
In the app, when adding a
device and selecting the
right band from the search
list, please slide the screen
of the X2GO to wake up
the device and then
complete the connection
(“bind successful”)
Know your device
1. Wearing Method
Wear the device on your wrist horizontally the same
method as wearing watches.
2. Heart Rate Monitoring
To monitor heart rate more accurately, please wear the
device on top of your wrist and a bit tighter than usual
when you are exercising.
04
Data Mode
Alarm Clock
Mode
Sports Mode
Heart Rate
Mode
measure
-ment
Time
3. Heart Rate Monitoring
Automatic heart rate monitoring is ON as default, and the
device monitors heart rate all day automatically.
4. Interface
Click the touch key to display successively
Function Introduction
1.1 Time Mode
Time dial can be switched on as follows:
App>Device>More>Time Format.
Choose 12hr or 24hr mode
Touch the screen to wake device - app will
show a tick next to time format <more
setting done.
Click the touch key to enter next mode
1.2 Data Mode
Click the touch key to enter the next mode:
Heart Rate Mode
Press and hold the touch key for 2s
to enter the sub-mode of “Data Reading”
Loading...