Cactus PT-04 User Manual

WIRELESS FLASH TRIGGER

BY

CCCCAAAACCCCTTTTUS

USUS

US™

USER MANUAL

2

Thank you for choosing CACTUS.

This Cactus PT-04 Wireless Flash Trigger is a powerful yet stable device to command
external flashes wirelessly. With this wireless flash trigger, you can place different flashes
at various angles and distances from the object without being hindered by wires. This is
particularly useful for portrait and product photography.

Please read this instruction manual carefully and refer to the manual of your camera and
flash if necessary.

The Cactus PT-04 Wireless Flash Trigger composes of a transmitter and a receiver. The
transmitter is to be attached on your camera while the receiver an external flash. When the
transmitter is activated, it emits radio signal to the receivers and therefore triggers the
external flashes.

Each receiver works with one flash. Number of receivers to be used with a transmitter is
unlimited. In other words, you can control as many external flashes as you wish provided
that you have enough receivers to work with them.

The transmitter is made of advanced electronic circuits and components. Its special
energy-saving design allows a new battery to last a year when the unit is in the standby
mode or triggers 20,000 times continuously. Triggering current is only 0.01mAh. It is safe
for all cameras, both film and digital, and flashes with standard hot shoe or PC sync
connector.

The four selectable channels and advanced anti-interference feature allow the device to
work within the effective area without interfered by other channels.

Trademark Information

CACTUS is a registered Trademark of Harvest One Limited in Hong Kong.

3

CONTENTS

Nomenclature …………………………………...P. 4

Operation …………………………………...P. 5

Major Specifications …………………………………...P. 7

Trouble Shooting …………………………………....P.8

Notices ……………………………………P. 9

Warranty …………………………………...P. 10

4

NOMENCLATURE

Transmitter

Receiver