Cabletron Systems SmartSwitch 6C105, SmartSwitch 6000, FE-100TX, FE-100FX, FE-100F3 Important Notice

IMPORTANT NOTICE

REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:

FE-100TX, FE-100FX, and FE-100F3

Under certain conditions it is possible for the FE-100 uplink module to
experience problems when used in the SmartSwitch 2000 and 6000
family of products.

Known issues are specific to the FE-100 units produced after 2/15/98 .
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the SmartSwitch 2000 and 6000 products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:

http://www.cabletron.com/support/techbltn/tb0354-9.html

(Over)

P/N 9032666-02

IMPORTANT NOTICE

REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:

FE-100TX, FE-100FX, and FE-100F3

To ensure full functionality of the FE-100 when used with SmartSwitch

2000 and 6000 products, it is recommended that the firmware be

upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this

firmware, please refer to the Cabletron Systems web site at:

http://www.cabletron.com/support/FE100/

To ensure full functionality of the FE-100 when used with SmartSwitch

2000 and 6000 products, it is recommended that the firmware be

upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this

firmware, please refer to the Cabletron Systems web site at:

http://www.cabletron.com/support/FE100/

For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
[phone].