Page 1
Wireless Presentation System
User’s Manual
(Model Name: WPS)
Version: 2.0
Date: May. 18, 2007
Page 2
User’s Manual
Contents of Table
1. Overview
.....................................................................................................3
2. Quick Start
.................................................................................................4
3. Client Utility
..............................................................................................7
3.1 Starting Program
.................................................................................7
3.2 Login
.........................................................................................................8
3.3 Buttons Description
............................................................................9
3.4 Start/Stop Presentation
.................................................................10
3.5 Start/Stop Playing Video
................................................................11
3.6 Open Admin Web Page
....................................................................11
3.7 Searching Server
...............................................................................12
3.8 Repeat
...................................................................................................13
3.9 System Information
.........................................................................13
3.10 Exit Program
...................................................................................13
4. Web Management
.................................................................................14
4.1. Home Page
...........................................................................................14
4.2. Download Software
..........................................................................14
4.3. Conference Control
...........................................................................15
4.4. Login Web Admin
..............................................................................16
4.5. System Status
.....................................................................................17
4.6. Network Setup
...................................................................................17
4.7. Projection Setup
................................................................................17
4.8. Change Passwords
............................................................................20
4.9. Reset to Default
.................................................................................20
4.10. Firmware Upgrade
........................................................................21
4.11. Reboot System
...............................................................................22
4.12. Logout
................................................................................................23
5. [Appendix]
...............................................................................................24
5.1 Wall Mount Instructions (Optional)
...........................................24
- -
2
Page 3
User’s Manual
1. Overview
Wireless Presentation System is an easy installation, convenient operation and
user friendly projecting device. It turns your current Projector into a high-end
Projector. With the Wireless Presentation System your Projector become a
wireless device and PC/Notebooks will be easier to project screen to Projector.
Plug & Play
Wireless Presentation System is a plug-and-play device which is easy to install
and connect with. Any Notebooks/PCs with built-in Centrino or Wi-Fi card can
easily download driver and connect to Wireless Presentation System.
Flexibility
Wireless Presentation System is compatible to all kinds of projectors, using
wire-line or wireless connection, to display presentations. Instantly project
your screen to the projector with just one mouse click. Nor more cable
swapping hassles.
Performance
Wireless Presentation System has the ability to deliver real time animation
screens for up to 1280x768 resolutions in 24-bit color depth. It also provides
friendly web-based administrating UI for easy configuration and wireless
security setups.
Security
Support Login code to protect other users from accessing presentation contents.
During presentation, screen images can also be protected by WEP 64/128
encryption.
Conference control
Supporting multi-users to switch presentation, any member at the conference
can easily login to presentation server and switch the computer’s screen to
Projector without moving the computer to Projector.
- -
3
Page 4
User’s Manual
Intelligent searching function
After perform Wireless Presentation System utility, the utility will automatically
search all the Wireless Presentation System which are available and within the
wireless LAN cover range。Users don’t need to do any other setting, without
worrying about the operation procedures.
¾ Features
Wireless presentation, no more cable swapping.
Video projection, projecting your video file on the screen through
WLAN/LAN.
Compatible to all projectors with standard VGA connectors.
One-Click to switch presenters’ displays.
Real time display for PowerPoint presentations, images and
applications.
Supports display resolutions up to 1280x768 with 24-bit color.
No installation CD required, software is directly downloaded from the
device.
Provide session security login and wireless WEP key to protect
presentation contents.
Conference control function is provided for the host to moderate a
meeting.
Provide friendly web-based user interface for easy configuration.
Support static-IP and DHCP server.
2. Quick Start
1) Connect projector VGA cable to WPS box VGA connector and turn on
projector power.
2) Turn on WPS box.
- -
4
Page 5
User’s Manual
♦ When Projector shows the default menu on the screen as below, it
indicates the WPS box is ready now.
3) Make sure your PC WLAN is enabled already, and connect your PC with WPS
box.
4) Open your browser and enter the IP address to get in WPS web home page.
♦ The default IP address of WPS is 192.168.100.10 or refers to the IP
address shown on the left corner of projector screen.
- -
5
Page 6
User’s Manual
5) Click on “Download Software”, and execute the installation program.
♦ After install the program, WPS shortcut will come out on the PC
screen.
- -
6
Page 7
User’s Manual
6) Make sure your personal firewall allows WPS software to pass through.
7) Enter the LOGIN CODE and
♦ You can see the login code on the projector screen
8) Click the “Play” button to start projection!
3. Client Utility
3.1 Starting Program
After you download WPS Windows program via web page successfully, then
follow below steps to start.
1) Click WPS icon to execute the program.
2) Program start to search for WPS box automatically,
- -
7
Page 8
User’s Manual
3) If WPS box founded then “Login Code” dialog box will be pop up on the PC
screen.
4) If not, will enter to disconnected state and “Reconnect” button shown for
you to try again.
z Searching for WPS box
z WPS box is founded and enter login code to start.
z Failed to find WPS box
3.2 Login
1) After “Login Code” dialog box shown, enter login code to start presentation.
2) You can see the login code shown on the projector screen.
- -
8
Page 9
User’s Manual
3.3 Buttons Description
1) After login successfully, you will see main UI of WPS application.
2) Click following buttons to manipulate WPS Application.
Presentation Mode
Video Mode
Start projecting
Pause projecting
Stop projecting
Refresh projecting screen
Server Login Code
While projecting in progress, this icon is blinking
- -
9
Page 10
User’s Manual
Start Playing Video
Stop Playing Video
Pause Playing video
Open Video File
Audio volume ON.
Audio volume OFF
Audio volume strength bar
Video time bar
While playing video, it will be blinking
Function menu
Minimize the program
Exit the program
3.4 Start/Stop Presentation
Click to start presentation.
Click to stop presentation.
Click to pause presentation, that will hide any activities of your PC
screen. Once you click “Play” button again, screen projection will be resumed.
- -
10
Page 11
User’s Manual
3.5 Start/Stop Playing Video
Click to switch to Video Mode.
Click to open the video file and submit to play it.
* Supported Video Format: MPG, MPEG, DAT, VOB, WMV9, ASF.
3.6 Open Admin Web Page
Click to open function menu and select “Web Admin” management web
page. The web page detailed functions will be described on next chapter.
- -
11
Page 12
User’s Manual
3.7 Searching Server
Click “Search Server” to search for WPS box.
- -
12
Page 13
User’s Manual
3.8 Repeat
Click “Repeat” to enable/disable video repeat capability.
3.9 System Information
Click “Info” to show system information. It includes product model name, IP
address and other information.
3.10 Exit Program
Click to exit this program.
- -
13
Page 14
User’s Manual
4. Web Management
4.1. Home Page
1. Make sure your PC connect to WPS box successfully.
2. Open your browser, it will enter WPS home page automatically.
3. If not, enter your IP address on the browser, you can see the IP on the
projector screen.
4. The default IP is 192.168.100.10
4.2. Download Software
1. Select “Download software” function.
2. Press “Login” button to download Utility, the default password is blank
3. You can save file first then execute later or execute this utility directly.
4. Follow Installation Wizard instructions to proceed till the installation process
complete.
5. If pop up “Windows Security Alert” because Windows firewall block this
program. You just press “Unblock” button to continue installation.
6. Once installation complete, a utility shortcut come out on the screen.
- -
14
Page 15
User’s Manual
4.3. Conference Control
1. This function allows you to host a meeting smoothly without projector cable
swapping and each participant can show their presentation easily.
2. Select “Conference Control” function.
3. Enter password, the default value is “trainer”, and then press [Login].
4. After login, you can see a User List on the screen which indicates all of users
connected to WPS box.
5. There are three columns, “Computer Name”, “ Play Control” and “IP
Address”.
6. You can press “Play Control” button to control who is next
presenter by “Play” button and “Stop” button.
7. User List
z Computer Name: The name of PC connected to WPS box.
z Play control：Show current user’s projecting status.
: Start projecting
: Stop projecting.
z IP address：The IP address of PC
- -
15
Page 16
User’s Manual
4.4. Login Web Admin
1. Click [Admin] and then enter password to login web page.
2. The password default value is “admin”.
- -
16
Page 17
User’s Manual
4.5. System Status
*** Click [System Status], shows current system status.
Model Name: Product model name
Versions:
1. Firmware version no.: Product firmware version number.
2. Software version no.: Windows client utility version number.
Network Status:
1. IP address：IP address of WPS
2. MAC address.
3. Subnet Mask.
4. Default Gateway
5. Wireless MAC address
6. Wire MAC address
Connection Status:
1. Projecting status: which is “Waiting for projecting” or “Projecting”
2. Total Users: It shows how many users login into WPS box.
4.6. Network Setup
There are many kinds of operating configurations as below.
- -
17
Page 18
User’s Manual
< Auto-Configuration Network Setup>
The default setting of the WPS box is DHCP client. When the WPS box is connected
to a LAN that already has a DHCP server present, the WPS box takes an IP address
assigned to it by the server. When the WPS box is connected to a LAN that does
not have a DHCP server, the WPS box becomes the DHCP server in the network.
< IP Setup>
♦ You can select “obtain IP address automatically” or “Use the following IP
address”
♦ IP Address: The default value is 192.168.100.10.
♦ Subnet Mask: The default value is 255.255.255.0
♦ Default Gateway: The default value is 192.168.100.10
<DHCP Server Setup>
♦ You can select “auto(Enable/Disable DHCP Server” or “Disable”
♦ Start IP: The start IP address of DHCP Server.
♦ End IP: The end IP address of DHCP Server.
< Wireless Setup>
♦ Region: default value is “Worldwide”.
♦ SSID: SSID string, max. Length is 32 bytes.
♦ Channel: to set fixed channel or Auto. The “Auto” means after power
- -
18
Page 19
User’s Manual
on WPS, it will scan all of wireless channel and select clear one channel
automatically.
♦ WEP: you can Disable WEP key or select one of 64bit or 128bit in ASCII
or HEX string.
♦ Key: If WEP is enabled, you have to set key value according to WEP
mode you selected.
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within
WPS box
♦ All Block can block Guest Users(through wireless) to access all office
network(LAN),
♦ All Allow can pass Guest Users(through wireless) to access all office
network
♦ Internet Only can block Guest Users (through wireless) from office
network (LAN) but still reserve internet connection capability.
<Apply >: press button to select this mode
<Cancel>: press button to abort action.
<Back>: Back to Operating mode main menu
4.7. Projection Setup
*** Click [Projection Setup] button
♦ <Resolution>: 1024*768, 1280x768 and 800*600.
♦ <Color Depth>: provide WPS output with 16bit or 32 bit color
depth. It depends on your PC settings.
♦ <Screen Refresh Rate>: This is VGA output refresh rate, provides
60 Hz and 75Hz to suit for different kinds of projectors.
♦ <Apply>：Confirmation and Save modifications
- -
19
Page 20
User’s Manual
♦ <Cancel>: Cancel all the modifications
4.8. Change Passwords
*** Click [Change Password] button, to change password value.
♦ <Enter New Password>: enter new password you want to change
for each category.
♦ <Confirm New Password>: double confirm new password.
♦ <Apply>: Confirmation and Save modifications.
4.9. Reset to Default
*** Click [Reset to Default] button to restore factory default settings.
<Apply>: Confirmation and action.
- -
20
Page 21
User’s Manual
*** Another way to restore Factory Default Settings, Follow below
procedures.
1. Power off WPS.
2. On the rear panel, press [Reset] button and Hold.
3. Turn o n W PS box.
4. Wait for over 10 seconds and relief [Reset] button.
5. It will take effect to restore factory default settings.
4.10. Firmware Upgrade
*** Click [Firmware Upgrade] button to upgrade firmware.
1. Firstly, you have to get latest firmware image file from your vendor.
2. Click <Browse> to specify file name you want to upgrade.
3. Click <Upgrade> to start.
4. A warning message shown and count down counter on the screen.
5. After a few minutes, a complete message shown on the screen.
- -
21
Page 22
User’s Manual
6. Restart WPS box to take effect.
Warning: Don’t power off WPS while firmware upgrade in progress,
otherwise will cause your Box doesn’t work and have to return device to your
vendor for fixing.
4.11. Reboot System
*** Click [Reboot System] button, to restart system
♦ <Reboot>: reboot system automatically.
- -
22
Page 23
User’s Manual
4.12. Logout
*** Click [Logout] button, to back Web home page.
- -
23
Page 24
User’s Manual
- -
24
5. [Appendix]
5.1 Wall Mount Instructions (Optional)
Loading...