CableMatic HPC-W-27 User manual

HPC-W27 3G WCDMA2100mhz Mobile Phone signal booster

A signal booster or cell phone repeater is a device used for boosting the cell phone network to the local
area by the usage of a reception antenna. In simple words, wireless signal booster is a device to boost the
wireless signal and this device make wireless coverage more and more. Wireless repeaters are practical,
beautiful and easy to install.Wireless repeaters are designed to meet the needs and requirements of
modern citizens. Wireless repeaters come complete with everything necessary for a full cell phone
repeater system enabling you to use your cell phone wherever you are. One of the most popular
applications of a wireless signal repeater is its use in buildings which are signal isolated. When a house
is located too far from the telecom station, which is usually installed around a city, cell phone signal can
be very low.

We provides signal boosters kits for any Homes, Offices, Cars, RV's, Boats and more. All

amplifier kits come with Indoor and Outdoor Antennas, Cables, Power adapters and more.

HPC-W-27 WCDMA 3G 21mhz repeater Features:

1. With unique appearance design, have good cooling function

2. With MGC function,(Manual Gain Control), Customer can adjust the Gain as needed ;

3. With DL signal LED display, help to install the outdoor antenna at the best state;

4.With AGC and ALC, make repeater work stable .

5.PCB with isolation function ,make UL and DL signal not influence each other,

6.Low intermodulation, high Gain ,stable Output power

HPC-W-27 2100mhz repeater Inside and Outside Design

HPC-W-27 Dual band repeater is to support any two mobile band existing in the world to
help end users to improve mobile signals for much better phone call quality and smoother data
transmission. It is designed to support coverage area max can up to 2000 square meters with
proper engineering. Below are the main features.

1. The consumer repeater is an ideal solution for providing a cost effective improvement in
cellular in-building coverage of a home, office, restaurant or building, in the quickest time
possible.

2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for
proper coverage during installation or maintenance.

3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the
repeater has built-in AGC and ALC circuits, which can automatically control the gain of the
repeater depending upon the strength of input signals.

4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation
from jamming the towers, saving your trouble from operators.

5.Wide band feature enables all devices operating within the wide frequency range of the
repeater to see an improvement in performance.

6.Multiple phones and other handheld devices throughout a building can benefit from a wireless
repeater.

7.Supports up to (500) users / calls simultaneously.

8.Extended phone battery life. (Your phone does not need to put out as much power due to
improved reception.)