Cable Electronics HM21DA, HM81DA, HM41DA User Manual

WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defective or malfunctions, Cable Electronics will replace or repair this unit (at their option) within a reasonable time. No expressed or implied warranty is made for any defects caused by immersion or exposure to liquids, abuse, neglect, improper operation of unit, excess wear and tear and defects resulting from unauthorized disassembly and or modification.
Cable Electronics, Inc. http://www.celabs.net
3209 Wood Street Garland, Texas 75041 (469)429-9200 Fax (469)429-9205
Document: HMXXDA_INFO_A.cdr Rev. A
CE labs can support many areas of your audio and
video distribution needs.
We manufacture RF modulators, RF amplifiers, HD
distribution amplifiers, and cables of all types.
See our full product line at www.celabs.net.
Or, call our sales department at 1 800 767 6189.
INSTRUCTION MANUAL
HDMI Distribution
Amplifiers
PanelLink digital technology.
Supports HDTV resolutions 480i, 480P, 720P, 1080i, & 1080P
Cascadable for larger display systems.
Heavy duty metal housing. Commercial duty rated.
Cable Electronics, Inc.
3209 Wood Street Garland, Texas 75041
(469)429-9200 Fax (469)429-9205
Pin # Signal Pin # Signal
1 TMDS Data 2+ 11 TMDS Clock Shield 2 TMDS Data 2 Shield 12 TMDS Clock ­3 TMDS Data 2- 13 CEC 4 TMDS Data 1+ 14 Reserved (N.C.) 5 TMDS Data 1 Shield 15 SCL 6 TMDS Data 1- 16 SDA 7 TMDS Data 0+ 17 DDC/CEC Ground 8 TMDS Data 0 Shield 18 +5 Power 9 TMDS Data 0- 19 Hot Plug Detect 10 TMDS Clock+
Installation / Operation Instructions
1. Turn off the devices to be connected together.
2. Connect the HDMI cable between the source (DVD, Satellite Receiver, etc.) and the “HDMI In” port of the Distribution Amplifier.
3. Connect the HDMI cables from the outputs of the distribution amplifier to the inputs of the monitors.
4. Power up the Distribution Amplifier and the Monitor connected to HDMI output number one on the amplifier. Leave the other monitors off for now.
5.Turn on power to the source device. The monitor connected to output number one should have picture and sound within about 5 seconds.
6. Turn on power to the remaining monitors.
NOTES: 1. All monitors connected to the distribution amplifier should be capable of the
same resolution.
2. Always connect the first monitor to output number one on the Distribution Amplifier first. This is necessary for the Electronic ID to be read properly by the source.
3. For best performance, try to use HDMI cables no longer than 3 meters in length.
POWER
OUT 4
OUT 3
INPUT
OUT 2
OUT 1
HD SOURCE
OUT 1
POWER
OUT 4
OUT 3
INPUT
OUT 2
OUT 1
HDMI Distribution Amplifiers
Cascade Configuration
HD MONITOR 1
HDMI IN
HD MONITOR 2
HDMI IN
HD MONITOR 3
HDMI IN
HD MONITOR 4
HDMI IN
HD MONITOR 5
HDMI IN
SPECIFICATIONS
Unit HM21DA HM41DA HM81DA
2-Port 4-Port 8-Port
HDMI Connector (A-Type Female) HDMI Connector (A-Type Female) Max. Resolution 1080P 1080P 1080P Cable Distance Signal Type Standard HDMI Signal Power Adapter (Min.) DC 9V 1A AC100~240V Housing Metal Weight 1.3 lbs. 2.2 lbs. 5.6 lbs. Dimensions (LxWxH) mm
Input
111
Output
248
(Device to Monitor) (Max.)10 m (Max.) 10 m (Max.) 10 m
DC 9V 1A Metal Metal
200x75x45 269x104x45 440x185x45
HM41DA
HM41DA