Cable Electronics HA 8 User Manual
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in material and
workmanship, under normal use and service, for a period of one year from the
purchase by the original purchaser. If this product is defective or malfunctions,
Cable Electronics will replace or repair this unit (at their option) within a reasonable
time. No expressed or implied warranty is made for any defects caused by
immersion or exposure to liquids, abuse, neglect, improper operation of unit, excess
wear and tear and defects resulting from unauthorized disassembly and or
modification.
Cable Electronics, Inc.
3209 Wood Street
Garland, Texas 75041
(469)429-9200 Fax (469)429-9205
Document: HA8_INFO_A.cdr Rev. A
www.celabs.net
CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
- Digital Signage software and Media Players
- HD Matrix Switchers
- RF modulators
- RF amplifiers
- HDMI and Component HD distribution amplifiers
- CAT 5 Signal Extenders
- VGA Extenders and Splitters
- and cables of all types.
See our full product line at .www.celabs.net
INSTRUCTION MANUAL
HDMI Distribution
Amplifier
Model HA 8
Integrated HCRS (HDMI Cable Retention System). Prevents
accidental disconnects and service calls.
PanelLink digital technology.
Supports HDTV resolutions 480i, 480P, 720P, 1080i, & 1080P
Cascadable for larger display systems.
Heavy duty metal housing. Commercial duty rated.
Cable Electronics, Inc.
3209 Wood Street
Garland, Texas 75041
(469)429-9200 Fax (469)429-9205
Silicon Image and PanelLink are registered trademarks of Silicon Image, Inc.
Pin # Signal Pin # Signal
1 TMDS Data 2+ 11 TMDS Clock Shield
2 TMDS Data 2 Shield 12 TMDS Clock 3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14 Reserved (N.C.)
5 TMDS Data 1 Shield 15 SCL
6 TMDS Data 1- 16 SDA
7 TMDS Data 0+ 17 DDC/CEC Ground
8 TMDS Data 0 Shield 18 +5 Power
9 TMDS Data 0- 19 Hot Plug Detect
10 TMDS Clock+
Installation / Operation Instructions
1. Turn off the devices to be connected together.
2. Connect the HDMI cable between the source (DVD,
Satellite Receiver, etc.) and the “HDMI In” port of the
Distribution Amplifier.
3. Connect the HDMI cables from the outputs of the
distribution amplifier to the inputs of the monitors.
4. Power up the Distribution Amplifier and the Monitor
connected to HDMI output number one on the amplifier.
Leave the other monitors off for now.
5.Turn on power to the source device. The monitor connected to output number one
should have picture and sound within about 5 seconds.
6. Turn on power to the remaining monitors.
7. Install cable ties through the two holes on either side of the cable if desired to prevent
accidental unplugging of the HDMI cables. See picture above.
NOTES: 1. All monitors connected to the distribution amplifier should be capable of the same resolution.
2. Always connect the first monitor to output number one on the Distribution Amplifier first.
This is necessary for the Electronic ID to be read properly by the source.
3. For optimum performance, try to use HDMI cables no longer than 5 meters in length.
1
2
3
4
56
Input
78
DC IN
HDMI SOURCE
OUT 1
HDMI Distribution Amplifiers Cascade Configuration
SPECIFICATIONS
Model HA8
HDMI Connector (A-Type Female)
HDMI Connector (A-Type Female)
Max. Resolution 1080P
Cable Distance
Signal Type Standard HDMI Signals
Power Adapter (Min.) DC V A
Housing Metal
Weight (3.5 lbs.) 1.5 Kg
Dimensions (LxWxH) mm (15.8” x 6.3” x 1.5”) 400 x 160 x 38
Input 1
Output 8
(Device to Monitor) 10 m (Max.)
54
1
2
3
4
56
Input
78
DC IN
1
2
3
4
56
Input
78
DC IN
HA8 Units may be cascaded 7 layer deep.
HD MONITOR
#1
HA 8
HD MONITOR
#7
HD MONITOR
#8
HD MONITOR
#14
HD MONITOR
#15
HD MONITOR
#21
HA 8
HA 8
Use these holes to secure
the HDMI cables with a cable tie.
Loading...