Cable Electronics AV400COMP User Manual

COMPONENT A/V DISTRIBUTION AMPLIFIER
INSTRUCTION MANUAL
LIMITED WARRANTY
Cable Electronics, Inc., warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from date of purchase by the original purchaser. If this product is defective or malfunctions, Cable Electronics will replace or repair this unit (at their option) within a reasonable time. No expressed or implied warranty is made for any defects caused by immersion or exposure to liquids, abuse, neglect, improper operating of unit, excess wear and tear and defects resulting from unauthorized disassembly and/or modification.
HIGH PERFORMANCE HDTV COMPATIBLE
INSTRUCTION MANUAL
COMPONENT A/V DISTRIBUTION AMPLIFIER
Compatible with all HDTV component video signals
True one to one ratio
No signal loss
Daisy chain several units for larger displays with great
picture quality
Heavy duty metal housing provides excellent shielding
Allows up to 150 ft. runs
CE0042-XXXXXX
3209 Wood Drive
Garland, Texas 75041
(800) 767-6189
(972) 429-9200
Fax: (972) 429-9205
www.celabs.net
MODEL AV400COMP
GENERAL INFORMATION
The AV400COMP allows any audio/video source, with Y, Cb, Cr or Y,Pb, Pr application outputs (component), to distribute audio and video. The signal ratio is true one to one with no loss from original sourrce to four different locations. These locations must have the same application as your audio/video source.
A
BC
A. 9 Volt AC input jack at 500mA with 2.1 mm power jack. LED lights up
when power is applied.
B. Input Jacks: Connect to original source at corresponding output jacks Video connections are coded (Y to Y, Cb to Cb, Cr to Cr, or, Y to Y, Cb to Pb, Cr to Pr) with audio connections being color coded (red to red, white to white).
C. Output Jacks: Connect to corresponding input jacks of TVs, VCRs, etc.
SAFETY INSTRUCTIONS
Location: Avoid locations with strong vibrations, direct sunlight or intense heat. Avoid Electrical Shock: Do not handle power cord with wet hands; do not expose to rain or other moisture. If liquid is spilled on unit, unplug and have unit serviced at authorized service center. To reduce the risk of electrical shock, do not remove cover. No user serviceable parts inside.
KEY INFORMATION
The AV400COMP can be looped, cascaded or put in tandem as shown without loss of audio/video signals. Audio/Video cables need to be top quality and can have runs of up to 100 feet between units and 150 feet between units and TVs.
Common Audio/video Sources: VCR, CD, Satellite receiver, etc.
Y
Cb
AUDIO
Cr
Y
DISTRIBUTION AMPLIFIER
Cb
Cr
LEFT
AUDIO
RIGHT
Y
DISTRIBUTION AMPLIFIER
Cb
Cr
LEFT
AUDIO
RIGHT
Y
DISTRIBUTION AMPLIFIER
Cb
Cr
LEFT
AUDIO
RIGHT
Audio/Video Source
LEFT
RIGHT
HIGH PERFORMANCE
AUDIO AND VIDEO
Y
COMPONENT
Cb
True One To One Ratio
Cr
Four Output
LEFT
AUDIO
RIGHT
CABLE ELECTRONICS, INC.
Model AV400COMP
HIGH PERFORMANCE
AUDIO AND VIDEO
Y
COMPONENT
Cb
True One To One Ratio
Cr
Four Output
LEFT
AUDIO
RIGHT
CABLE ELECTRONICS, INC.
Model AV400COMP
HIGH PERFORMANCE
AUDIO AND VIDEO
Y
COMPONENT
Cb
True One To One Ratio
Cr
Four Output
LEFT
AUDIO
RIGHT
CABLE ELECTRONICS, INC.
Model AV400COMP
Y
Y
Y
Cb
Cb
Cb
Cr
Cr
Cr
LEFT
LEFT
LEFT
AUDIO
AUDIO
AUDIO
RIGHT
RIGHT
RIGHT
Y
Y
Y
Cb
Cb
Cb
Cr
Cr
Cr
LEFT
LEFT
LEFT
AUDIO
AUDIO
AUDIO
RIGHT
RIGHT
RIGHT
Y
Y
Y
Cb
Cb
Cb
Cr
Cr
Cr
LEFT
LEFT
LEFT
AUDIO
AUDIO
AUDIO
RIGHT
RIGHT
RIGHT
VIDEO
Gain:
2 Volt Unterminated, 1 Volt Terminated: 75 ohm +5%
Input Impedance:
75 ohms +5%
Output Impedance:
75 ohms +5%
Video Insertion Loss:
50 Hz to 10 MHz < 40dB
In to Out Isolation:
50 Hz to 10 MHz 32 dB port to port
Out to In Isolation:
50 Hz to 10 MHz 60 dB
Return Loss:
50 Hz to 10 MHz 20 dB
Video Bandwidth:
> 70 MHz
AUDIO
Gain:
Unity
Input Impedance:
22 K ohm
Output Impedance:
1 K ohm
THD:
0.05% at 1.0 Volts input level
Frequency Response:
20 Hz to 100 KHz
Channel Separation:
> 75 dB @ 1 KHz
In to Out Isolation:
60 dB
Out to In Isolation:
60 dB
Signal to Noise:
100 dB @ 2 Volts (out)
A/V Input/Output Jacks:
RCA type Phono Jack
Loading...