Cable Electronics AV400, AV700 User Manual
AUDIO / VIDEO
DISTRIBUTION
AMPLIFIERS
INSTRUCTION MANUAL
LIMITED WARRANTY
Cable Electronics, Inc., warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from date of purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at its option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids,
abuse, neglect, improper operating of unit, excess wear and tear and
defects resulting from unauthorized disassembly and/or modification.
INSTRUCTION MANUAL
HIGH PERFORMANCE
AUDIO / VIDEO
DISTRIBUTION
AMPLIFIERS
■
True one to one ratio
■
No signal loss
■
Daisy chain several units for larger displays with great
picture quality
■
Heavy duty metal housing provides excellent shielding
■
Allows up to 150 ft. runs
CE0037-113006
3209 Wood Drive
Garland, Texas 75041
(800) 767-6189
(972) 429-9200
Fax: (972) 429-9205
www.celabs.net
MODEL AV400 & AV700
GENERAL INFORMATION
Both models are low noise, low distortion unity gain distribution amplfiers for
line level stereo audio and video baseband signals.
Both models distribute a true one to one signal ratio. There is no loss of signal
from original source to any output.
The model AV400 distributes audio/video to four TVs without loss. The AV700
distributes audio/video to seven TVs.
AB C
A. 15 Volt DC input jack and power indicator. LED lights up when
power is applied.
B. Input Jacks: Connect to original source at corresponding output jacks.
Connections are color coded (red to red, yellow to yellow and white
to white).
C. Output Jacks: Connect to corresponding input jacks of TVs, VCRs, etc.
Connections are color coded.
SAFETY INSTRUCTIONS
Location: Avoid locations with strong vibrations, direct sunlight or intense
heat. Avoid Electrical Shock: Do not handle power cord with wet hands; do not
expose to rain or other moisture. If liquid is spilled on unit, unplug and have
unit serviced at authorized service center. To reduce the risk of electrical
shock, do not remove cover. No user serviceable parts inside.
KEY INFORMATION
The AV400 and 700 units can be looped, cascaded or put in tandem as shown
below without loss of audio/video signals. Audio/Video cables need to be top
quality and can have runs of up to 100 feet between units and 150 feet
between units and TVs.
Common Audio/video Sources:
VCR, CD, Satellite receiver, etc.
VIDEO
Gain:
Audio/Video Source
1 Volt, Unterminated 2 Volt
Input Impedance:
75 Ohms +5%
Video Response:
HIGH PERFORMANCE
AUDIO AND VIDEO
DISTRIBUTION AMPLIFIER
Four Output
True One To One Ratio
CABLE ELECTRONICS, INC.
Model 400
50 Hz to 10 MHz <.4dB
Ch. to Ch. Isolation:
50 Hz to 10 Mhz 32 dB
Out to In Isolation:
50 Hz to 10 MHz 60 dB
Return Loss:
50 Hz to 10 MHz 20 dB
AUDIO
HIGH PERFORMANCE
AUDIO AND VIDEO
DISTRIBUTION AMPLIFIER
Four Output
True One To One Ratio
CABLE ELECTRONICS, INC.
Model 400
HIGH PERFORMANCE
AUDIO AND VIDEO
DISTRIBUTION AMPLIFIER
Four Output
True One To One Ratio
CABLE ELECTRONICS, INC.
Model 400
Gain:
Unity
Input Impedance:
22 K Ohm
Output Impedance:
100 Ohm
THD:
0.05% at 1.0 Volts
input level
Frequency Response:
10 to 50 KHz + 1 dB
Channel Separation:
> 75 dB @ 1 KHz
Out to In Isolation:
60 dB
Signal to Noise:
100 dB (re: 2 Volts out)
Loading...