INSTRUCTION MANUAL
CabKing-6V3
2
READ ALL INSTRUCTIONS FIRST
IMPORTANT SAFETY INSTRUCTIONS
For your own safety, be sure to read, understand and follow all warnings,
safety rules and instructions in this instruction manual and on the machine
before use. Failure to do so can result in serious personal injury.
SETUP SAFETY
KNOW YOUR POWER TOOL. Read this instruction manual carefully. Learn the
applications and limitations as well as specific warnings and hazards related to
this machine.
KEEP GUARDS IN PLACE AND SECURED. Never operate this machine without
hoods. Make sure all guards are operating and properly secured before each use.
INTENDED FOR INDOOR USE ONLY.
AVOID DANGEROUS ENVIRONMENTS. Do not use this machine near gasoline or
other flammable liquids.
MAKE SURE MACHINE IS SECURELY MOUNTED. Abide by the operating
instructions for proper mounting instructions before connecting the tool into a
power supply.
USE ONLY RECOMMENDED ACCESSORIES. The use of improper accessories on
this machine may cause risk of injury.
CHECK FOR DAMAGED PARTS. Before use of this machine, always check for any
damaged guards or parts to determine that it will operate properly and perform its
intended function. Check for proper alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any other conditions that may affect its
operation. A guard or other part that is damaged must be properly replaced
through the manufacturer of this machine to avoid risk of injury.
USE ONLY IDENTICAL CABKING PARTS FOR REPLACEMENT PARTS. Use of any
other parts may create a hazard or cause product damage.
3
ELECTRICAL SAFETY
USE ONLY GROUNDED OUTLET OR GFCI OUTLET. The electrical outlet you plug
the machine into must be securely grounded and away from the machine. Do NOT
use an extension cord without a ground. Connect motor power cord to a surge
protected outlet or preferably a GFCI (Ground Fault Circuit Interrupter) outlet.
While not necessary, a GFCI is recommended to prevent electric shock and can be
purchased at your local hardware store.
DON’T ABUSE THE CORD. Never carry the machine by the cord or yank it to
disconnect from receptacle. Keep cord away from heat, oil and sharp edges.
USAGE SAFETY
NEVER DISCONNECT MOTOR, LAMP OR PUMP WITH WET HANDS. Though the
motor is sealed, you must make sure to keep all electrical connections dry. Avoid
touching the pump when connected to the power.
ALWAYS WEAR PROPER EYE PROTECTION. Enclosed are safety goggles to
protect you from any debris that may fly out while grinding. We recommend
wearing the enclosed goggles or safety glasses with side shields. Everyday eyeglasses are NOT safety glasses. If anyone is around the machine while it is in use,
they must wear safety glasses.
WEAR PROPER APPAREL. Do not wear any loose clothing, gloves, neckties or
jewelry that can get caught in the machine’s moving parts. Long hair must be
secured with a rubber band or hair tie.
KEEP WORK AREA WELL LIT, CLEAN, AND UNCLUTTERED.
ADULT SUPERVISION IS REQUIRED AT ALL TIMES. Never leave the machine
running unattended.
DO NOT TOUCH MOTOR HOUSING. Avoid contact with the motor housing when in
use. The motor is totally enclosed and non-ventilated so it produces high
temperatures. The running temperature can reach around 220°F.
DO NOT OPERATE THIS MACHINE WHILE UNDER THE INFLUENCE OF DRUGS,
ALCOHOL OR ANY MEDICATION.
4
NEVER RUN WHEELS DRY. Make sure there is adequate water used while grinding
so that rock dust is not formed. This dust may contain chemicals that can be
hazardous to your lungs if inhaled and is known to cause cancer, birth defects or
other reproductive harm. To reduce your exposure to these chemicals, work in a
well ventilated area and wear a dust mask if the grinding operation is dusty.
USE ONLY WATER AS COOLANT.
SOME ROCKS CONTAIN POISONOUS ELEMENTS. Avoid grinding rocks that
contain uranium, mercury, lead, arsenic, etc. Know the material you are grinding.
DO NOT FORCE THE TOOL or attachment to do a job it is not designed to do.
DIRECTION OF FEED. Be aware of the wheel rotation direction before use.
ALWAYS EASE THE WORKPIECE AGAINST THE RESIN WHEELS. A harsh impact
can break the wheel. Use light pressure when starting to grind. Too much pressure
can cause the wheel to crack.
NEVER GRIND MORE THAN ONE WORKPIECE AT A TIME.
NEVER START THE MACHINE IF A WHEEL IS IN CONTACT WITH A WORKPIECE.
WHEELS CONTINUE TO SPIN AFTER TURN OFF eventually slowing to a stop.
AVOID AWKWARD OPERATIONS AND HAND POSITIONS. Make sure you have
good balance while working on this machine. A sudden slip could cause your hand
to move into the wheel.
ALWAYS STAY ALERT. You must be focused while working on this machine. It is
possible for stones to catch on the wheels and be ejected out of the grinding area.
MAINTENANCE SAFETY
ALWAYS DISCONNECT POWER BEFORE SERVICING. Disconnect machine, lamp
and water pump from power before making adjustments and when not in use.
DO NOT OPEN MOTOR. No user serviceable parts inside.
CLEAN AND DRY MACHINE AFTER USE.
SAVE THESE INSTRUCTIONS
5
TABLE OF CONTENTS
SAFETY INSTRUCTIONS ……………………………………..
PARTS LIST……………………………………………………
ASSEMBLY INSTRUCTIONS……………………………….…
SETTING UP THE WATER SYSTEM………………………….
FINAL ASSEMBLY……………………………………………..
MACHINE USAGE……………………………………………..
THE ART OF CABBING………………………………………….
MAINTENANCE………………………………………………….
WATER SYSTEM PARTS………………………………………..
TROUBLESHOOTING…...……………………………………….
OPTIONAL ACCESSORIES……..……………………………….
WARRANTY INFO………………………………………………...
2
6
8
9
10
11
13
13
16
17
18
19
6
MACHINE DETAILS & PARTS
Cabochon
book
What you see below is exactly what the
CABKING-6V3 looks like out of the box.
PART # DESCRIPTION QTY
1 MOTOR 1
2 LAMP 1
3 WATER CONTROL KNOB 6
4 HOOD 2
5 LAP ADAPTER 1
6 3/4″ ALUMINUM SPACER 4
7 1″ ALUMINUM SPACER 1
8 WHEEL SPLASH GUARD 2
9 SIDE SPRAY TUBE 2
10 DRIP PAN 2
11 BASEBOARD 1
12 280# RESIN WHEEL 1
13 600# RESIN WHEEL 1
14 1200# RESIN WHEEL 1
15 3000# RESIN WHEEL 1
12 13 14 15
1
2
4
8
9
10
7
6
5
6
4
9
10
8
6
6
Instruction
manual
3
3
11
Loading...