Bluetooth® Headset & Intercom
for Scooters and Motorcycles
User's Guide
www.caberg-helm.com
3
English
JUST SPEAK S
JUST SPEAK S
CONTENTS
1. INTRODUCTION
Thank you for choosing the Caberg Just Speak S, Bluetooth Headset
and Intercom for Scooters and Motorcycles. With the Just Speak S, you
can call handsfree on your Bluetooth mobile phone, listen to stereo music
or GPS navigation voice instructions via Bluetooth, and have intercom
conversations in full duplex with a passenger or other riders.
The Just Speak S is compliant with the Bluetooth specification 3.0
supporting the following profiles: Headset Profile, Hands-Free Profile (HFP),
Advanced Audio Distribution Profile (A2DP), and Audio Video Remote
Control Profile (AVRCP). Please confirm compatibility with other devices
with the manufacturers.
Please read this user guide carefully before using the headset. Also visit
www.caberg-helm.com for the latest version of the user guide and for
additional information related to Caberg products.
1. INTRODUCTION
The Just Speak S includes the following features:
• Bluetooth handsfree for Bluetooth mobile phones
• Bluetooth stereo headset for Bluetooth stereo devices such as MP3
players
• Bluetooth stereo headset for Bluetooth GPS navigations
• Bluetooth intercom up to 200 meters (220 yards)*
• Easy two-button operation
• Installation friendly unibody design
• Firmware upgradeable
Key Specifications:
• Bluetooth 3.0
• Supporting profiles: Headset Profile, Hands-Free Profile (HFP), Advanced
Audio Distribution Profile (A2DP), Audio Video Remote Control Profile
(AVRCP)
* in open terrain
1. INTRODUCTION .......................................................................................3
2. PACKAGE CONTENTS ............................................................................4
3. GETTING STARTED ..................................................................................5
Installing the Just Speak S on Your Helmet ....................................................5
Powering On .................................................................................................6
Powering Off ..................................................................................................6
Charging the Just Speak S ............................................................................6
Checking Battery Level ..................................................................................7
Adjusting the Volume Level ............................................................................8
Function Priority .............................................................................................8
Fault Reset ....................................................................................................8
4. OPERATION QUICK REFERENCE..........................................................9
5. PAIRING AND USING THE JUST SPEAK S WITH BLUETOOTH
DEVICES
...................................................................................................11
Mobile Phone Pairing ...................................................................................11
Multipoint Mobile Phones Pairing .................................................................11
Bluetooth Stereo Device Pairing ...................................................................12
Bluetooth GPS Navigation Pairing ................................................................12
Mobile Phone Call Making and Answering ...................................................15
Stereo Music ...............................................................................................15
6. INTERCOM CONVERSATION ................................................................16
Pairing with Other Just Speak S Headsets for Intercom Conversation ..........16
Starting and Ending Intercom Conversation .................................................16
Intercom and Mobile Phone Call ..................................................................16
Intercom Failure ...........................................................................................17
Intercom Reconnection ................................................................................17
7. JUST SPEAK S CONFIGURATION SETTING ......................................17
Enabling/Disabling Voice Activated Phone Answering ..................................18
Enabling/Disabling Voice Prompts................................................................18
Delete All Bluetooth Pairing Information .......................................................18
Reset to Factory Default Setting ..................................................................19
Exit Voice Configuration Menu .....................................................................19
8. FIRMWARE UPGRADE ...........................................................................20
BATTERY INFORMATION ..............................................................................20
MAINTENANCE AND CARE ..........................................................................21
DISPOSAL .......................................................................................................21
CERTIFICATION AND SAFETY APPROVALS .............................................22
FCC Compliance Statement ........................................................................22
FCC RF Exposure Statement .......................................................................22
FCC Caution ................................................................................................22
CE Declaration of Conformity .......................................................................22
Industry Canada Statement .........................................................................23
Bluetooth License ........................................................................................23
WAIVER AND GENERAL RELEASE .............................................................23
Two-year Limited Warranty .......................................................................... 25
Limitation of Liability.....................................................................................25
Return for Full Refund .................................................................................. 26
WARNING ........................................................................................................26
4 5
English
JUST SPEAK S
JUST SPEAK S
2. PACKAGE CONTENTS
Status LED
Speakers
Microphone
(-) Button
(Intercom Button)
(+) Button
(Phone Button)
Pin-hole
Reset Button
DC Power Charging &
Firmware Upgrade Port
Just Speak S Headset
2. PACKAGE CONTENTS
USB Power & Data Cable
Microphone Sponges
Velcro Pads
for Speakers
3. GETTING STARTED
Installing the Just Speak S on Your Helmet
• Place the speaker-microphone unit in the helmet along with its’ Velcro
pads, centered to your ear, in the ear pockets of the helmet.
• Some helmet models are equipped with chin pads with a removable
cushioning inside that can be unthreaded from the chin strap in order to
ease and improve the positioning of the speakers. Besides, other helmet
models are equipped already with pockets where the speakers can be
placed without the need of the velcro.
• Locate the boom microphone as closely as possible to your mouth when
wearing the helmet . If possible, try to let the boom of the microphone
behind the chin pads .
• Hide the wire under the helmet padding after the installation.
3. GETTING STARTED
1
2
6 7
English
JUST SPEAK S
JUST SPEAK S
3
4
Powering On
Press and hold the (+) Button and the (-) Button at the same time for 1
second to power on. The blue LED turns on and you will hear ascending
beeps and “Hello”.
Powering Off
Press the (+) Button and the (-) Button at the same time. The red LED
turns on for about 2 seconds until it turns off completely and you will hear
“Goodbye” and descending beeps.
Charging the Just Speak S
You can charge the Just Speak S by connecting the supplied USB power &
data cable into a computer USB port or USB wall charger. You can use any
standard micro-USB cable to charge the Just Speak S. The LED turns red
while charging, and turns blue when the headset is fully charged. It takes
about 2.5 hours to fully charge.
Checking Battery Level
You can check the battery level in two different ways when the headset is
powering on.
LED Indicator
When the headset is powering on, the red LED flashes rapidly indicating
the battery level.
LED Status
4 flashes High, 70~100%
3 flashes Medium, 30~70%
2 flashes Low, 0~30%
Voice Prompt Indicator
When you power on the headset, keep pressing and holding the (+) Button
and (-) Button simultaneously for about 3 seconds until you hear three high
tone beeps. Then you will hear a voice prompt indicating the battery level.
However, if you release the buttons as soon as the headset turns on, you
will not hear the voice prompt for the battery level.
Note:
1. The USB power & data cable is also used for firmware upgrade of the Just
Speak S.
2. The USB wall charger is not included in the package. Any 3rd party USB charger
can be used with Caberg products if the charger is approved by either FCC,
CE, IC, or other locally approved agencies that Caberg accepts. Please contact
Caberg regarding locally approved agencies Caberg accepts.
8 9
English
JUST SPEAK S
JUST SPEAK S
Low Battery Warning
When the battery is low, the blinking blue LED in stand-by mode turns to
red and you will hear mid-tone triple beeps and a voice prompt saying “Low
battery”.
Adjusting the Volume Level
You can easily adjust the volume by pressing the (+) Button or the (-) Button.
You will hear a beep when the volume reaches maximum or minimum level.
The volume is set and maintained independently at different levels for each
audio source even when you turn off and on the headset. For example,
once you set the volume for mobile phone handsfree, it will not change even
if you adjust the volume when you hear Bluetooth MP3 music. So you can
always maintain the preferred optimum volume level for each audio source.
Function Priority
The Just Speak S operates in the following order of priority:
(Highest) Mobile Phone
Intercom
(Lowest) Bluetooth Stereo Music
A lower priority function is always interrupted by a higher priority function.
For example, stereo music is interrupted by an intercom call, and intercom
conversation is interrupted by an incoming mobile phone call.
Fault Reset
When the Just Speak S is not working properly or is in faulty status for
any reason, you may reset by pushing the pin-hole reset button on the left
speaker unit. Insert a paper clip into the reset pin-hole and press and hold
the reset button for a second with light pressure. The Just Speak S will be
switched off after which time, you have to turn the system back on and try
again. However, this will not restore the headset to factory default settings.
4. OPERATION QUICK REFERENCE
Function
Operations
Power
On/Off
1 sec. 1 sec.
+
Volume
Adjustment
1 press 1 press
or
Intercom
Pairing
pairing
A
B
1)
5 sec. 5 sec.
2)
1 sec.
4. OPERATION QUICK REFERENCE
Function
Operations
Bluetooth
Pairing
(Phone, MP3,
GPS)
1)
Sena SMH3
Caberg JSS v1.0
5 sec.
2)
Sena SMH3
Caberg JSS v1.0
Select Caberg Just Speak S
3)
Sena SMH3
Caberg JSS v1.0
Enter PIN
Start & End
Intercom
Conversation
1 sec.
Conguration
10 sec.
Loading...