CAA UPG16 User Manual

UPG16 INSTALLATION INSTRUCTIONS

WARNING !

Always make sure weapon is unloaded and the chamber

is clear before starting any weapon modification

UPG16

PISTOL GRIP

With weapon upside down,
remove screw & lock washer
from exisiting pistol grip. Save
hardware for step 5.

Carefully remove the pistol
grip and collect the safety
detent and safety detent
spring.

Reinstall the safety detent &
spring in their original position
inside the lower receiver.

1

2

3

Position UPG16 replacement
pistol grip on the lower
receiver. Slide safety spring
into spring hole.

Reinstall pistol grip screw and
lock washer which you saved
from step 1.

After securing screw insert
compartment plug.

* Use push pin to change
fingergrooves & backstraps.

4

5

6

WWW.CO M M A N DA R M S . C O M

P: 215-949-9944 • 1-866- 611-9576 • F: 215-949-9191

E: [e-mail]