C2G Video-Audio Distribution Amplifier AV400SV User Manual
AUDIO / VIDEO
DISTRIBUTION
AMPLIFIER
INSTRUCTION MANUAL
LIMITED WARRANTY
Cable Electronics, Inc., warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from date of purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids,
abuse, neglect, improper operating of unit, excess wear and tear and
defects resulting from unauthorized disassembly and/or modification.
HIGH PERFORMANCE
INSTRUCTION MANUAL
AUDIO / VIDEO
DISTRIBUTION
AMPLIFIER
■
S-video and/or composite video with left and right audio
■
True one to one ratio
■
No signal loss
■
Daisy chain several units for larger displays with great
picture quality
■
Heavy duty metal housing provides excellent shielding
■
Allows up to 150 ft. runs
CE0038-XXXXXX
3209 Wood Drive
Garland, Texas 75041
(800) 767-6189
(972) 429-9200
Fax: (972) 429-9205
www.celabs.net
MODEL AV400SV
GENERAL INFORMATION
The AV400SV allows any audio/video source to distribute S-video and/or
composite video with left and right audio. The signal ratio is true one to one
with no loss from original source to four different locations. These locations
must have the same application as your audio/video source.
A
BC
A. 15 Volt DC input jack at 600MA with 2.5 mm power jack. LED lights up
when power is applied.
B. Input Jacks: Connect to original source at corresponding output jacks.
Composite connections are color coded (red to red, yellow to yellow and
white to white) with S-video to S-video.
C. Output Jacks: Connect to corresponding input jacks of TVs, VCRs, etc.
SAFETY INSTRUCTIONS
Location: Avoid locations with strong vibrations, direct sunlight or intense
heat. Avoid Electrical Shock: Do not handle power cord with wet hands; do not
expose to rain or other moisture. If liquid is spilled on unit, unplug and have
unit serviced at authorized service center. To reduce the risk of electrical
shock, do not remove cover. No user serviceable parts inside.
KEY INFORMATION
The AV400SV can be looped, cascaded or put in tandem as shown without
loss of audio/video signals. Audio/Video cables need to be top quality and can
have runs of up to 100 feet between units and 150 feet between units and TVs.
Common Audio/video Sources:
VCR, CD, Satellite receiver, etc.
Audio/Video Source
HIGH PERFORMANCE
AUDIO AND VIDEO
WITH S-VIDEO
DISTRIBUTION AMPLIFIER
Four Output
True One To One Ratio
CABLE ELECTRONICS, INC.
Model 400SV
S-VIDEO COMPOSITE S-VIDEO
HIGH PERFORMANCE
AUDIO AND VIDEO
WITH S-VIDEO
DISTRIBUTION AMPLIFIER
Four Output
True One To One Ratio
CABLE ELECTRONICS, INC.
Model 400SV
S-VIDEO COMPOSITE S-VIDEO
HIGH PERFORMANCE
AUDIO AND VIDEO
WITH S-VIDEO
DISTRIBUTION AMPLIFIER
Four Output
True One To One Ratio
CABLE ELECTRONICS, INC.
Model 400SV
S-VIDEO COMPOSITES-VIDEO S-VIDEO
VIDEO
Gain:
2 Volt Unterminated,
1 Volt Terminated: 75 ohm +5%
Input Impedance:
75 ohms +5%
Output Impedance:
75 ohms +5%
Video Insertion Loss:
50 Hz to 10 MHz < 40dB
In to Out Isolation:
50 Hz to 10 MHz 32 dB
port to port
Out to In Isolation:
50 Hz to 10 MHz 60 dB
Return Loss:
50 Hz to 10 MHz 20 dB
Video Bandwidth:
> 10 MHz
Audio Response:
> 100 KHz
AUDIO
Gain:
Unity
Input Impedance:
22 K ohm
Output Impedance:
1 K ohm
THD:
0.05% at 1.0 Volts input level
Frequency Response:
20 Hz to 100 KHz
Channel Separation:
> 75 dB @ 1 KHz
In to Out Isolation:
60 dB
Out to In Isolation:
60 dB
Signal to Noise:
100 dB (re: 2 Volts out)
A/V Input/Output Jacks:
RCA type Phono Jack
Loading...