C2G USB to Serial DB9 SuperBooster Wall Plate User Manual
USB to Serial DB9
SuperBooster Wall Plate
User Manual
Introduction
Thank you for purchasing the patent-pending USB to Serial DB9 SuperBooster Wall
Plate. This wall plate solution provides the connection between USB and the traditional
RS-232 serial port while conquering USB length limitations. The USB to Serial DB9
SuperBooster Wall Plate from Cables To Go extends the distance of a serial device to a
host computer up to 150ft via USB so you can place your device (such as a cellular
phone, PDA, digital camera, modem, scanner, bar code reader, printer, or ISDN terminal
adapter) exactly where you want it!
This plug-and-play device consists of a transmitter unit and receiver unit incorporated
into two, single gang Decora™ compatible wall plates. The transmitter/r eceiver pair is
connected via standard Cat5, Cat5E, or Cat6 UTP cable allowing for easy in-wall
installation. This makes for a clean, finished installation important for home owners,
classrooms, offices and anywhere you don’t want visible cables lying around. Use preterminated network cables or pull un-terminated cable and use the included tool-less IDC
RJ45 connectors. The USB to DB9 Serial SuperBooster Wall Plate is self-powered so no
external power source is required.
Features
• Extends the distance of a serial device from a USB-enabled computer up to 150ft
• Supports automatic handshake mode
• Over 230kbps data transfer rate
• Supports remote wake-up and power management
• 96 byte buffer each for upstream and downstream data flow
• Ideal for use with serial devices such as cellular phones, PDAs, digital cameras,
modems, scanners, bar code readers, printers, or ISDN terminal adapters
• Fits a standard J-box
• Compatible with Leviton Decora® brand cover plates
• Bus-powered so no external power source is required
• Uses standard Cat5/Cat5E/Cat6 patch cord (not included) for ease of use and
flexibility
• Included tool-less IDC RJ45 connectors allow you to terminate your own cable
• Compliant with USB Specification 1.1
• Connectors:
o Transmitter: USB Type B Female; RJ45 Female
o Receiver: Serial DB9 Female; RJ45 Female
*Decora™ is a registered trademark of Leviton Manufacturing Company, Inc. This Product is not manufactured or endorsed by the
Leviton Manufacturing Company, Inc.
1
Package Contents
• USB to DB9 Serial SuperBooster Wall Plate- Transmitter Unit
• USB to DB9 Serial SuperBooster Wall Plate- Receiver Unit
• (2) Two RJ45 tool-less IDC connectors
• (4) Four #6x32 slotted/phillips screws
• User Guide
• Driver CD
Hardware Requirements
• A USB-enabled PC
Software Requirements
• Windows® 98/98SE/ME/2000/XP/Vista/Windows 7
2
Loading...