USER GUIDE
USB 1.1 EXTENDER KEYSTONE INSERT-TRANSMITTER
Model: 29349
1
TABLE OF CONTENTS
Introduction......................................................................................................................................................2
Features...........................................................................................................................................................3
Package Contents............................................................................................................................................4
Device Overview..............................................................................................................................................5
Device Installation............................................................................................................................................6
Technical Specifications..................................................................................................................................8
Cables To Go One Year Warranty...................................................................................................................9
Important Safety Information..........................................................................................................................10
1
INTRODUCTION
Thank you for purchasing the USB 1.1 Extender Keystone Insert (Transmitter). This device is designed to
conquer USB length limitations and put your USB 1.1 devices where you want them. This solution extends
the distance of a USB device to a host computer up to 150ft so you can place your USB projector, camera,
printer, or any other USB device exactly where you want it! The USB Extender Keystone Insert is powerful
yet simple, with no drivers to install or special software required. We recommend that you read this
manual thoroughly and retain for future reference.
2
FEATURES
Extends the functional distance of a USB signal, allowing a USB device to function with a USB-enabled
computer up to 150ft away
Ideal for use with USB projectors, interactive whiteboards, cameras, printers, web cams, hubs, or any
other USB device
Keystone fits standard keystone wall plates
Bus-powered so no external power source is required
Uses standard cat5/cat5E/cat6 patch cords (not included), allowing for easy use and flexibility
Compliant with USB Specification 1.1
3
PACKAGE CONTENTS
USB v1.1 Extender Keystone Insert-Transmitter
User Guide
4
DEVICE OVERVIEW
1. RJ45 Ports
• Cable interface to bridge this Transmitter and a receiving unit
2. USB Type B Male Connector
• Connects to your computer’s USB port
3. Blank Insert
Front View
3
2
1
Rear View
1
5
DEVICE INSTALLATION
Step 1
Install the USB Extender Keystone Insert in a Cables To Go or Quiktron wall plate, surface box, or any
standard keystone and angled multimedia wall plate or patch panel.
Step 2
Install your USB SuperBooster/Extender receiver unit in the same manner as Step 1, if you are using
the wall plate style receiver or if using the dongle style, you may position this where you your devices
will be connected.
Step 3
Using a pre-terminated Cat5/Cat5e/Cat6 cable or terminate your own cable to connect the USB
Extender Keystone Insert and your USB SuperBooster/Extender receiver unit.
Step 4
Plug your computer into the source end (USB Extender Keystone Insert end) using a standard USB A/B
cable.
Step 5
Plug your USB enabled device/s into the receiver end (USB SuperBooster/Extender receiver unit end)
using a standard USB A/B, A/mini-B or proprietary USB cable that came with your device.
Step 6
Turn your computer/source on and you can begin to use your USB devices.
6
DEVICE INSTALLATION
Note: We recommend using a solid 24AWG Cat5/Cat6 patch cable when connecting this transmitter
with a receiver unit.
Example Application: (shown being used with Cables To Go 2-Port USB SuperBooster Wall Plate
Receiver-#29345)
USB Cable A/B
Cat5/6 Patch Cable
USB Cable
7
TECHNICAL SPECIFICATIONS
Product No. 29349
Complies USB Rev. Ver. 1.1
Connectors
Power Mode Bus
Product Dimension 2.52 x .79 x 1.29 in.
Product Weight .05 lbs
Product Color White
USB Type B female/
RJ45 female
8
CABLES TO GO™ ONE YEAR WARRANTY
At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year
warranty on this device. If you experience problems due to workmanship or material defect for the duration
of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA)
number, contact customer service at 1-800-506-9606 or www.cablestogo.com.
Cables To Go
3555 Kettering Blvd.
Moraine, OH 45439
1-800-506-9607
www.cablestogo.com
9
IMPORTANT SAFETY INFORMATION
! Liquid:
If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit.
Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the
product.
! Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts.
! THERE ARE NO USER SERVICEABLE PARTS
Do not attempt to open this product and expose the internal circuitry. If you feel that the product is defective, unplug the
unit and refer to the warranty information section of this manual.
10
11
VER. 1.0.3.20.09
12
Loading...