Wireless Notebook Mouse 2.4GHz
Quick Installation Guide
81166
The wireless notebook mouse is reliable and particularly designed for use with notebook. The optical
mouse with 2.4 GHz nano USB receiver offers, with its range of up to 10 m, maximum flexibility. The
ergonomic design offers best comfort and makes the mouse suitable for both left and right handers. The
ednet wireless mouse allows, thanks to its features and functions, accurate control of notebook or PC.
The fast scroll wheel is perfectly suitable for fast navigation. With its adjustable sensitivity settings (800,
1200, 1600 DPI), the mouse can be adjusted to your individual needs. The energy saving mode helps to
conserve battery power.
Specification
Maximum Wireless working distance is 10 meters
2.4GHz mouse: Radio Frequency/32channels hopping with 2 group from 2.405~2.476GHz
Resolution: 800/1200/1600DPI switchable
Receiver: nano receiver
Wheel: 1 mechanical scrolling wheel
Power Consumption: DC=1.5V, 19mA
Automatic power-saving mode.
Installation
1. Take out nano receiver
2. Connect nano receiver to PC, until the automatic installation is completed.
3. Open the battery cover on bottom and insert battery.
4. Finish above steps, click left or right button, then you can start to use it.
Caution: Below factors may cause the wireless performance
- Please do not use any metal object to be close the nano receiver.
- If some other wireless devices closing Nano receiver, please remove it and reconnect nano receiver
to get different communication ID.
- When the battery is out of energy, please change a new battery.
- Please do not use mouse on very shiny surface or transparent surface.
- Please do not put Nano receiver next to Bluetooth dongle
- Never recharge the Non-Rechargeable Batteries and never throw them into fire.
- Please observe local regulations for disposing of batteries.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of Directive
2014/53/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be
requested by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment. In this
case, the user can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Loading...