C2G 4 Port VGA over UTP Extender- Base Unit User Manual

TruLink™
4 Port VGA over UTP Extender- Base Unit
USER MANUAL
Model #39960
Introduction
The TruLink™ VGA over UTP Extender Base Unit, when used with the Remote Unit (part #39961), is a robust solution that allows you to extend your VGA signal up to 300 meters (1000 feet) over a Cat5E Unshielded Twisted Pair (UTP)cable. This solution is ideal for applications where your VGA monitor needs to be placed further than the average 100 foot VGA cable limitation. Driving a VGA signal over Cat5E allows you to take advantage of your UTP cable infrastructure already installed for a cost-effective and reliable installation.
The TruLink VGA over UTP solution is ideal for applications when you need to place your computer in remote location. This is common in digital signage applications typical in retail stores, houses of worship, classrooms, and board rooms where you need video presentation in one room but want th e computer to be out of sight and in a s afe and secure e nvironment. With the TruLink VGA over UTP Extender, you can place your display across the room, on another floor, or in another building while your computer remains in a convenient location.
Extend your analog video signal up to 300 meters (1000 feet) to up to four remote monitors
Cat5E UTP cabling enables easy and cost effective in-wall installation
Ideal for digital signage applications in retail stores, houses of worship, classrooms, and
board rooms
Equalization length and VGA signal gain on the Remote Unit is adjustable to enhance picture
Input/Output Connectors: HD15 Female
RJ45 connectors join the Base Unit and the Remote
Power Supply: DC 12V 600mA
Remote Unit required- sold separately (part #39961)
Package Contents
TruLink™ 4 Port VGA over UTP Extender- Base Unit
DC 12V 600mA Power Adapter
1.2 meter VGA Cable
User Manual
System Requirements
Base Unit (included)
Remote Unit- Part #39961 (sold separately)
Cat5E UTP Cable
HD15 connection on computer
HD15 connection on each monitor, projector, or other display device
HD 15 male to male cables for each display device connected
Installation
1. Turn off the PC and monitor(s).
2. Connect the HD-15 female input connector on the VGA over UTP Extender Base Unit with the HD-15 male to male cable to the PC.
3. At each remote location, conn ect the HD-15 female output connector on the VGA over UTP Extender Remote Unit (sold separately) with HD-15 male cable from your monitor(s).
4. If you have local monitor, connect the HD-15 ma le cable from that mo nitor to the female output connector on the Base Unit.
5. Connect the Base and Remote units together with a CAT5E cable.
6. Connect a power adapter to both the Base and Remote unit.
7. Turn on the monitor(s) and PC.
Application Diagram
REAR PORTS
1. VGA In (HD-15 Female Connector)
2. VGA Out (HD-15 Female Connector)
3. Power jack
4. Power LED
FRONT PORTS
1.
Four CAT5 (RJ-45) connectors
Specifications
Function 39960
VGA In Connector HD-15 Female x 1
VGA Out Connector HD-15 Female x 1
RJ-45 Connector 4
Max. Resolution
Cable Distance (Max.) 300 meters/1000 feet
Power Adapter (Min.) DC 12V 600mA
Housing Aluminum
Weight (lbs) .55
Dimensions (LxWxH )
inches
2048x1536 60Hz
5x3.25x1.25
Distances and Resolutions for CAT5/5E and CAT6 cables
50M 2048x1536
100M 1280x1024
CAT5/5E
180M 1024x768 200M 800x600 300M 640x480
30M 1920x1440
CAT6*
* The optimizations provided by the extender product to compensate for skew in Cat5/5e cables does not apply equally to Cat6. This is the reason for the reduced performance on Cat6 and why Cat5/5e is recommended.
50M 1280x1024
100M 800x600
Wiring Information & Coding
Conductor
Identification
Pair 1
Pair 2
Pair 3
Pair 4
RJ45 Pin
Assignment
5 White-Blue 4 Blue 1 White-Orange 2 Orange 3 White-Green 6 Green 7 White-Brown 8 Brown
Color Code
for Conductor
1501 Webster Street
Dayton, Ohio 45404
www.cablestogo.com
Loading...