Byron Home Easy HE-303 Installation Instructions Manual

RE-INVENTING THE HOME

HOME

easy

HE-303 Remote

control Indoor PIR

V1.0

Installation:

The HE-303 Indoor PIR adds extra security and ease of
use to your Home Easy products
  -Selectable timer setting
  -Selectable Detection Range
  -Veriable Light setting
  -25 Metre Wire Free Range
  -Battery Powered 2*AAA

The HE-303 allows you to control your
HomeEasy Receiver sockets or modules via a wire free
PIR sensor. When the PIR beam is broken the indoor PIR will switch
on your Remote control sockets or modules for between
5 seconds to 10 minutes, Ideal for controlling house hold lighting.
Compatible with all Home Easy products.

The HomeEasy Indoor PIR can be placed in any location, even in bathrooms.
Only use the adhesive strip on suitable surfaces.
Avoid placing the PIR in direct sunshine, above direct heat sources or on
metallic surfaces.

Detection Area

Detection Range:

The Indoor PIR has 3 selectable detection ranges: 1, 3 or 6 Metres.
To alter the detection range, remove the front cover and move the slide switch
to the required setting.

3. Replace the two front covers.

2. The base unit can be attached to the wall using either the adhesive strips or

screws (Included).

1. Using a small screwdriver remove the front cover and base plate.

Deleting Remote Control:

To delete the PIR from the memory of a HomeEasy receiver socket or module
control , simply press the "Learn" button. The LED will start to blink; slide the
"LEARN" switch to "DEL",, the LED will blink twice to confirm that the remote
control has been removed from the receiver sockets memory.

Pairing/Deleting with Remote Control:

Example

Up to Six remote control units can be paired with each
HomeEasy Receiver socket or module, to pair the indoor
PIR with a receiver unit, remove the front cover and,
slide the switch to DEL.

Now press the "Learn" button, the LED will start to flash, then slide the
"LEARN" switch to "SET", the units are now paired together.

Detection Angle:

The PIR detection area is 65 degrees, this can be reduced using the clip-on
covers (included). if required the covers can be cut to size.

if r

equired the c

o

v

ers c

an be cut to siz

e

.

1.0

1 2 3 4 5 6 7 8

6M 6M 6M
3M 3M 3M
1M 1M 1M

6M 6M 6M
3M 3M 3M
1M 1M 1M

1.5

1 2 3 4 5 6 7 8

Detection Distance (Metres)

Height (PIR)

C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR

Contact Details :

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

A

B
DK
FIN

F

D
GR

LT

IRL

I
L

NL

P
E
S

UK
BG
CZ
EST

H
IS

LV

M
N

SK
SLO
CH
PL
RO

0560

Tel: [phone]
Fax: [phone]
Web: www.chbyron.com
E-mail:
[e-mail]

Contact:   Helpline: 0845 2301 231

RF Range: The radio signals operating distance is reduced when the signal

has to pass through walls. The radio signals achieve a range of 25m; this can
be reduced depending on the type of material.

TIMBER

METAL

GLASS

PLASTICS

10 - 15%

BRICK

10 - 40%

CONCRETE

40- 80%

10 - 40%

90%

5 - 15%

Range

Reduction Guide:

H

elp S

ec

tion :

Day/Night Setting:

The PIR can operate one of three setting depending upon the ambient light
Level, to alter the light setting remove the front cover and use the slide switch
to select the setting.

PIR will operate 24Hrs a day

PIR will operate between 4pm to 6am

PIR will operate between 6pm to 6am

Times are approximations only

Changing Batteries:

1. Unclip the front cover from the front of the PIR
using a small screw driver.

2. Remove the batteries and replace using 2
new 'AAA' batteries, making sure the polarity
is correct.

Always dispose of old batteries in a
environmentally responsible way

3. Replace the frontcover making sure the clips are correctly aligned and
firmly push the case together.

No Activation:   Check the battery level and polarity, replace with new
     batteries if necessary

Receiver Stays:   The PIR may be suffering from false activation, try
ON Continuously  adjusting the position and detection angle.

1Min

Setting Timer :

The HomeEasy indoor PIR will switch on the
receiver socket or module for a predefined
period of time; this can be set between 5seconds
and10 minutes.
To select the time period, remove the front cover
and slide the switch to the required timer
setting.

5Sec

5

10min

Product Specification:

Remote Control: HE-303
Battery: 2 * AAA
Range: 25Metres (Open Distance)
Frequency: 433.92MHz

Warning: Never Exceed the
Product Specification