Byron Home Easy HE-209 User Manual

C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR

Contact Details:

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

A

B
DK
FIN

F

D
GR

LT

IRL

I
L

NL

P
E
S

UK
BG
CZ
EST

H
IS

LV

M
N

SK
SLO
CH

PL
RO

0560

Tel: [phone]
Fax: [phone]
Web: www.chbyron.com
E-mail:
[e-mail]

HE-209 4Gang Extender

V1.0

The HE-209 is a 4Gang Remote Control extension
socket, simply press "On/Off" to switch on and off 4
appliances in a single press. The HE-209 is part of the
HomeEasy range of products and is designed to work
with all HomeEasy products.

Contact:   Helpline: 0845 2301 231

RE-INVENTING THE HOME

Product Operation:

HOME

easy

Pairing/Deleting with Remote Control:

Up to Six remote control units can be paired with each 4Gang Receiver
Socket. To program the 4Gang Extender, insert the Receiver Socket into a
plug socket and switch on the power, now press the "Learn" button. The LED
will start to flash, now press the selected "On" button on the remote control,
the LED will stop flashing. The units are now paired together, you can test this
by pressing the selected "On/Off" button, the red power light will switch
on when the 4gang extension is on.

Product Specification:

4Gang Extension: HE-209
Input: 230V ~50Hz
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Max Load: 3000W
(Combined Resistive load)
Indoor Use Only

* All 4 extension sockets will switch on and off together.

Warning: Never Exceed the Product Specification

Learn:

Remote Socket reset:

To delete all the remote control units from the memory of the 4Gang
Extender, hold the "Learn" button until the LED starts to blink
continuously. Press the "Learn" button again, the LED will blink twice to
confirm that all paired remote controls have been deleted from the
receiver sockets memory.

easy

HOME

FUSE

Fuse 13Amp BS1362.

easy

HOME

Deleting Remote Control:

To delete a remote control that has been paired with a 4Gang Extender, simply
press the "Learn" button. The LED will start to blink; press the "Off" button on
the remote control, the LED will blink twice to confirm that the remote control
has been removed from the receiver sockets memory.

The HE-209 has a max combined load for
the 4 individual extension sockets
of 3000W.

Remote Control: HE-300
Input: 3v Cr2032 (Byron Sx100)
Frequency: 433.92MHz
Indoor Use Only

Remote control unit:
Pull out the battery slide holder from the bottom of the controller. Replace the
CR2023 (Byron SX100) battery making sure the polarity is correct as per markings
inside the case.

Outdoor Socket:

No batteries are required for the 4gang Extension unit.

Changing Battery:

The HE-209 is fitted with a 13Amp BS1762, to replace the fuse:
1: Using a small screwdriver remove the fuse holder from the 4gang extension unit.
2: Replace the fuse with a 13Amp BS1762.
3: Replace the fuse holder, making sure the holder is correctly pushed in.

Changing Fuse:

2M

Remote Receiver

Socket

4Gang Extender

All manuals and user guides at all-guides.com

all-guides.com

HOME

easy

Quick Guide

easy

HOME

1

243

G

II III

I IV

30m

O

N

O

F

F

Indavidual

3000W

MAX

Group

easy

HOME

FUSE

Fuse 13Amp BS1362.

1

2

3000W MAX

FUSE

ON

easy

HOME

Learn

ON

easy

HOME

Learn

easy

HOME

1

2

4

3

G

II

III

I

IV

ON

OFF

All manuals and user guides at all-guides.com