Byron Home Easy HE-202 Installation Instructions Manual

C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR

Contact Details:

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

A

B
DK
FIN

F

D
GR

LT

IRL

I
L

NL

P
E
S

UK
BG
CZ
EST

H
IS

LV

M
N

SK
SLO
CH

PL
RO

0560

Tel: [phone]
Fax: [phone]
Web: www.chbyron.com
E-mail:
[e-mail]

V1.0

The HE-202 Dimmer Socket is an expansion
unit for the HomeEasy range of products
and is designed to work with all HomeEasy
remote controls.

Contact:   Helpline: 0845 2301 231

RE-INVENTING THE HOME

Product Operation:

HOME

easy

Pairing with Remote Control:

Up to Six remote control units can be paired with each receiver socket or
module. To program a socket insert the unit into a plug socket and switch on
the power, now press the "Learn" button. The LED will start to flash, now press
the selected "On" button on the remote control, the LED will stop flashing.
The units are now paired together, you can test this by pressing the selected
"On/Off" button

Always refer to the original instruction swhen using with additional products.

Deleting Remote Control:

To delete a remote control that has been paired with a HE202 receiver socket,
simply press the "Learn" button. The LED will start to blink; press the "Off"
button on the remote control, the LED will blink twice to confirm that the
remote control has been removed from the receiver sockets memory.

Remote Socket reset:

To delete all the remote control units from the memory of the receiver
socket, hold the "Learn" button for more than 6 seconds, the LED will start
to blink continuously. Press and hold the "Learn" button again, the LED
will blink twice to confirm that all paired remote controls have been
deleted from the receiver sockets memory.

Product Specification:

Remote Control: HE-202
Input: 230V ~50Hz
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Max Load: 300W (Incandescent)
Indoor Use Only

Warning: Never Exceed the Product Specification

Learn Button

LED

HE-202

Additional Dimmer
Socket

easy

HOME

300W Dimmer300W Dimmer300W Dimmer

Dimming Receiver Sockets :

1. Using a paired remote control, Press the "On" button and press "On" again.

The unit will start the dimming cycle.

Never exceed 300W maximum load.

2. To set the receiver socket at the required level, press the "On" Button.

press "Off" to switch the receiver off.

C R2 032

30m

Page1:2

HOME

easy

Quick Guide

ON

easy

HOME

easy

HOME

1

243

G

II III

I IV

O

N

O

F

F

Indavidual

300W

MAX

Group

easy

HOME

ON

easy

HOME

1

2

ON

easy

HOME

easy

HOME

1

2

4

3

G

II

III

I IV

ON

OFF

300W

MAX

Dim mer

300W Dimmer300W Dimmer300W Dimmer

300W Dimmer300W Dimmer300W Dimmer

300W Dimmer300W Dimmer300W Dimmer

300W Dimmer300W Dimmer300W Dimmer

Remote Control Not

Included