Byron DB313 Installation and Operation Instruction

™ DB313 Wire Free30MetresChime Kit

1

2

3

Using a small flat	Insert the 23A battery	Remove the battery cover and
screwdriver, insert into the	(Supplied) into the battery	insert 3 X 1.5V Size ‘AA’/LR6
locking clip and gently	holder, making sure the	batteries, making sure the
twist. The back plate will	Positive/Negative terminals	Positive/Negative terminals
unclip from the Bell Push.	match the internal	match the internal markings.
	markings.
4	5	6

	Insert the Plug-through	Press the bell push to
	Chime into a standard		Plug in a standard plug
	220-240V ~50Hz wall	check that the chime is	e.g. Table light.
		correctly setup.
	socket and switch the		Max load: 1000W
	socket ON.

Bell Push & Door Chime:

1: Using back plate as template

2: Making sure UP arrow points UP.

3: Mark and drill holes.

4: Insert wall plugs and attach to wall using screws provided.

5: Clip the Bell Push on to the back plate making sure Bell Push ‘Clicks’ in to place.

6:Place the portable chime & Plug-through the Door Chime into a socket, within the operating range (30M). Transmission of the wire free signal through Walls, Doors and Ceilings etc, may reduce the operating range. Chime is designed for INDOOR use only.

Usage Guide: Avoid positioning the Bell Push/Chime on or directly near metallic surfaces as this may reduce the operation range.

UPVC Door Frames:

When positioning the bell push onto a UPVC door, always check the operating performance before final installation, internal metal frame of the door may affect performance.

Tip: Try adjusting the location of the Bell Push slightly to the Left/Right or place on an external wall.

Note: the appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction. Children should be supervised to ensure that they do not play with the appliance.

Specification	Portable Door Chime: DB301 v2		Plug-Through Door Chime: DB303 v2
Bell Push: DBT	Power: 3 x AA/LR6 1.5V Batteries (Not supplied)		Power: 220-240V ~50Hz (1W)
Power: 1 x 23A 12V DC Battery (supplied) Range: 30 Metres			Range: 30 Metres
IP44 Weather Resistant	Indoor Use Only		Max Load: 1000W
			Indoor Use Only
					SN:SP021012
	Tel: [phone] (UK)			433.92MHz
	9-5 Mon-Fri, Local call charges apply	R&TTE
	[e-mail]
		APPROVED		BG	N
	www.chbyron.com	B	I
		A	IRL	UK	M
	GB: CH Byron	DK	L	CZ	SK
		FIN	NL	EST	SLO
	Byron House, Sherwood Rd	F	P	H	CH
		D	E	IS	PL
	Astonfields, Bromsgrove	GR	S	LV	RO
		LT
	B60 3DR	CH Byron Electrical United Kingdom. www.chbyron.com
				Project Manager
	UK	V2
				Mr G Hunter