Byron BY32 User Manual

1
Converter
2
LED light
3
Open clip
4
Wall mounting hole
5
Melody select button
BY32 5013529136902
01 02 Option 1
Converter Unit
You will need
2mm
1x
10
A B C
s
A & C
A B C
s
Melody Select
1
2
3
4
A B C
s
CR2032
CR2032
CR2032
A B C
s
CR2032
5
6
7
8
9
6
LED
7
Battery
8
Terminal block
9
Wire entrance hole
10
Wall plugs and screws
Battery operated
Battery operated Transformer operated Transformer operated
T T
A B C
s
CR2032
A B C
s
CR2032
A B C
s
CR2032
220-240V
A B C
s
CR2032
220-240V
A B C
s
CR2032
220-240V
A B C
s
CR2032
220-240V
A & C
A & C
A & B
A & B
PRESS
Connect to bell push terminals in bell Connect to bell push terminals in bell Connect to bell push & transformer terminals in bell
Connect to bell push terminals
DO NOT CONNECT TO BELL PUSH TERMINALS DO NOT CONNECT TO BELL PUSH TERMINALS
C
M
Y
CM
MY
CY
CMY
K
BY32 IM 06122013.pdf 1 06/12/2013 14:43
IMPORTANT - RETAIN THIS INFOMATION FOR FUTURE REFERENCE READ CAREFULLY
Safety
The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, tablecloths, curtains, etc...
The normal operation of the product may be disturbed by strong electromagnetic
interference.
This equipment is intended for domestic use only.
The appliance shall not be exposed to dripping or splashing.
n the appliance.
nt ventilation.
Ensure the bell push is not mounted where it could become immersed by water/
rain.
DO NOT allow children to play with this appliance.
Battery Warnings
An adult must carry out battery replacement and installation.
Remove exhausted batteries from this product.
DO NOT short-circuit the battery terminals.
DO NOT mix used and new batteries.
DO NOT mix alkaline standard (carbon-zinc), lithium or rechargeable batteries.
DO NOT use rechargeable batteries in this product.
DO NOT recharge non-rechargeable batteries.
DO NOT allow water to come into contact with the batteries or wiring.
Install carefully to prevent any damage to the batteries
When installing batteries in the battery compartments, ensure the batteries are
placed as marked (+)(-).
Only the recommended batteries should be used.
Remove batteries from product when not in use for long periods of time.
Keep this product out of the reach of small children.
Store unused batteries in their original packaging.
Dispose of used batteries responsibly.
Getting started...
In more detail...
Smartwares Safety & Lighting
34, Sherwood Road
Bromsgrove
B60 3DR United Kingdom
www.chbyron.eu
Helpline
Help line number: 0845 2301231
Open 10am-4pm Mon-Fr, except Thurs 12:30pm-4pm. Local call charges apply.
Recycling
This symbol is known as the ‘Crossed-out Wheelie Bin Symbol’. When this symbol is marked on a product or battery, it means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment. Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment
Converter unit Power: 1x 3V CR2032 (included) Consumption: 3.0mA - ON, 0.003mA - OFF Operating Temperature: -10°C to +40°C Operating Distance: 100 metres in open field Works with all Byron BY range products only.
Smartwares Safety & Lighting declares that the appliance, model (BY32), Conforms to all relevant European Directives. The complete declaration of conformity is available on request at:
Smartwares Safety & Lighting 34, Sherwood Road Bromsgrove B60 3DR United Kingdom www.chbyron.eu
03
Pairing Wirefree Bells
10s
HOLD
BEEP BEEP
BEEP BEEP
A B C
s
NB: For full pairing instruction for door bells please check through Wirefree Bell manuals.
04
Mounting
PRESS
Mounting hole
CR2032
C
M
Y
CM
MY
CY
CMY
K
BY32 IM 06122013.pdf 2 06/12/2013 14:43
Loading...