BVA Hydraulics IEPD5513, IEP10010, IAP10010, IEPD10010, IEPDS10010 User Manual

IAP5506-M0_022013

Shop Presses

Instruction Manual

MODELS: IAP5506, IEP5506, IMP5506, IAP5513, IEP5513, IEPD5513,

IEP10010, IAP10010, IEPD10010 & IEPDS10010

SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153

Tel: [phone] * Fax: [phone]

E-mail: [e-mail] Website: www.bvahydraulics.com

Max. Operating Pressure 10,000 PSI

Models IAP5506, IEP5506, IMP5506,

IAP5513, IEP5513 & IEPD5513

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

!

Obey all safety messages that follow this symbol to avoid possible injury or death.

Models IEP10010, IAP10010, IEPD10010 &

IEPDS10010

Printed in USA

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall

have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and
safety information shall be conveyed in operator’s native language before use of this product is authorized. Make certain that the
operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as
to the safe and proper use of this product as outlined in this factory authorized manual, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged parts are noted. If any component of this
product has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), discontinue
use until checked out by a BVA Hydraulics Authorized Service Center. Owners and operators of this equipment shall be aware
that the use and subsequent repair of this equipment may require special training and knowledge. It is recommended that an

annual inspection be done by qualied personnel and that any missing or damaged parts, decals, warning / safety labels or signs

be replaced with factory authorized replacement parts only. Any component of this Equipment that appears to be damaged in any

way, is worn or operates abnormally shall be removed from service immediately until such time as it can be repaired/replaced.

Labels and Instruction Manuals are available from manufacturer.

PRODUCT DESCRIPTION

BVA Hydraulics Shop presses are designed for automotive, truck, implement, eet, and industrial repair shops where pressing,

bending, straightening, forming, holding is required. Each press includes a cylinder, an electric pump with pendant switch, a
winch assembly which provides safe and fast way to raise and lower the bed frame, and a pressure gauge which provides for
monitoring the applied press force.

Typical applications include installation and removal of alternator and power steering pump bearings, axle bearings, transmission

bearings, seal, driveshaft bearings and u-joints and others. It is not intended for use as an assembly table or as xture stand used
to secure a large, nal assembly component. Please refer to Cylinder and Pump manuals for more information.

WARNING: To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of

!

each pressurized attachment be equal to or greater than the rated working pressure developed by the hydraulic pump.

NOTICE: The power retract feature of the IEPD5513, IEPD10010 & IEPDS10010 Shop Presses is not intended to be used
under load. Never pull or raise a workpiece with the power retract feature.

! WARNING

• Study, understand, and follow all instructions provided with and on this device before use.

• Do not exceed rated capacity.

• Prior to use, make sure press is securely anchored.

• The press shall be installed and operated in accordance with federal (OSHA), state and local safety standards.

• Operators and observers shall wear eye protection that meets ANSI Z87.1 and OSHA standards.

• Keep hands, arms, feet and legs out of the work area. Accidental slippage can result in personal injury.

• Use appropriate guarding to contain any pieces that may break or y apart when applying force.

• Use only press accessories having a capacity rating equal to or greater than the capacity of the press.

• Verify lift cables are slack before pressing on the bolster.

• Avoid off-center loads.

• No alterations shall be made to the product.

• Failure to heed and understand these instructions and markings may result in personal injury, property dam-

age or both.

BEFORE USE

1. Inspect before each use. Do not use if bent, broken or cracked components are noted. Check for and tighten any loose as­semblies.

2. Verify that the product and the application are compatible, if in doubt call BVA Technical Service.

3. Before using this product, read the operator’s manual completely and familiarize yourself thoroughly with the product, its com­ponents and recognize the potential hazards associated with its use.

2

SPECIFICATIONS

Press

Model

IMP5506

IAP5506 PA2000/air-hydraulic

IEP5506 PEW0501T/electric

IAP5513

IEP5513 PEW0501T/electric

IEPD5513 HD5513 PEWM0501T/electric

IAP10010

IEP10010 PEW1002T/electric

IEPD10010

IEPDS10010 PESML1002T/electric

Rated

Capac-

ity

55 Ton

100 Ton

Cylinder

Model

H5506

H5513

H10010

HD10010

Pump

Model/Type

P2001/manual

PA3801/air-hydraulic

PA7550

PEWM1002T/electric

Press Bed

Depth

14-7/8” 35-1/2” 79-1/8 x 56 x 30 14 55-1/2

16-1/4” 35-3/8” 89-1/2 x 63 x 30 11-1/4 52

Press

Bed

Width

Press Size

(H” x W” x L”)

Cylinder

Cylinder

Model

H5506

H5513 13.27 145.77 18.15 31.42

HD5513 13.19 144.94 20.04 33.23 3.74

H10010

HD10010 10.13 208.3 27.80 3.74 2.95 2.00

Rated

Capacity

(ton)

55

100

Stroke

(in.)

6.22

10.24

Effective

Area

(in3)

10.99

20.57

Oil Vol-

ume

3

(in

68.34 11.14 17.36

210.6

Min

Height

)

(in.)

17.68

Max

Height

(in.)

27.93

Outer

Dia.
(in.)

5

6.97

Ram

Dia.
(in.)

3.15

4.13

Saddle

Dia.
(in.)

2.76

Min.

Work

Height

(in.)

Collar

Thread

(in.)

5”-12

6-7/8”-12

Height

Collar
Thread
Length

Max.

Work

(in.)

(in.)

2.17

1.73

Hand Pump

Model

P2001 122 200 10,000 0.81 0.14 3/8”-18 NPTF 24

Air Pump

Model

PA1500 91.5

PA3801 232 27

PA7550 460.6 36

Electric

Pump

Model

PEW0501T

PEWM0501T

Manual Pump (Hand pump)

Usable Oil Volume

(in3)

Pressure Rating

(psi)

1st Stage 2nd Stage 1st Stage 2nd Stage

Air Pump

Usable Oil Volume

(in3)

Pressure Rating

(psi)

10,000 65 11 90-175

Electric Pump

Reservoir

Capacity

(gal)

1 350 10,000 293 18

Pressure Rating

(psi)

1st Stage 2nd Stage 1st Stage 2nd Stage

Oil Output Flow Rate

(in3/min)

Oil Displacement

(in3)

Oil Output Flow

Rate (in3/min)

No Load Load

Valve

Type

3-way,

3-pos

4-way,

3-pos

Oil Outlet

Port

Thread

Input Air Pressure

Range

(psi)

Motor

Current
Size
(hp)

0.5 9 115/125 60

Draw

(A)

Weight

(lbs)

Weight

(lbs)

18

Motor

Voltage

(V)

Weight

(lbs)

3

Electric Pump (con’t)

PEW1002T

PEWM1002T

PESML1002T 311 73

2 700 10,000

397

37

3-way,

3-pos

4-way,

3-pos

1 12 115/125

71

Air Pump for

Model IAP5513

Air Pump for

Model IAP5506

Hand/ Manual Pump

for Model IMP5506

Electric Pump for Model

IEP5506, IEP5513 &

Pressure Gauge

Control Valve Knob

Pendant Switch

Bed Frame

Arbor Plates

(purchased separately)

Figure 1 - Components for 55 Ton Press.

Upper Cross Member

Electric Pump

IEPD5513

Lower Cross Member

Cylinder

Upper Cross Member

Winch

Support Pin

Upright Channel

Base
Channel

Cylinder

Air Pump for Model

IAP10010

(purchased separately)

Pressure Gauge

Control Valve Knob

Pendant Switch

Bed Frame

Arbor Plates

Figure 2 - Components for 100 Ton Press (Model IEP10010)

Lower Cross

Member

4

Winch

Upright Channel

Support Pin

Base
Channel