Buyers MXR3 User Manual

Quality since 1946

Mounting Instructions

MXR3 Motorcycle Rack

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone [phone] • Fax [phone]

Toll-Free Fax [phone] • buyersproducts.com

Tools Required

5/16" Drill
3/16" Allen wrench
1/2" Wrench

1. Place the MXR3 rack centered against the
pickup bed and mark the three mounting hole loca­tions for drilling. If the pickup bed has overhangs,
it may be necessary to mount the rack upside down
for a better fit.

CAUTION: If the pickup bed has a bed liner,
ensure that the rack is fully supported by the
pickup bed and not the bed liner.

2. Drill three 5/16" diameter holes in the pickup
bed in the locations marked in step 1.

3. Mount the MXR3 rack using the hardware
provided. Use a washer under the screw heads and
under the lock nuts.

CAUTION: Do not overtighten the hardware as it
may crush the rack frame tubing.

Bill of Materials

item part no. qty. de scriptio n

- - 1 Motorcycle Rack

- - 3 Screw, 5/16-18 x 2"

- - 6 Washer, 5/16"

- - 3 Nut, 5/16" Lock

WARRANTY

Buyers Products Co. warrants all truck/trailer hardware manufac­tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions. Any
product which has been altered, including modification, misuse,
accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of
Buyers Products Co. under this warranty is limited to repairing or
replacing any part or parts which are returned, prepaid, and are
found to be defective by Buyers Products Co. Authorization from
Buyers Products Co. must be obtained before returning any part.
No charges for transpor tation or labor performed on Buyers’ prod­ucts will be allowed under this warranty.

MXR3 Application

3008230 Rev. A