BuyDirectSign BYDS1030 Owner Manual

SAVE THESE INSTRUCTIONS

OS- Escape 4D Massage Chair

OPERATION INSTRUCTIONS

※Products refer to the actual product, without prior notice.

Thanks for purchasing this product. Please read this manual instruction carefully in order to know how to use this product correctly before operation. Please pay more attention to some important safety warning and keep this manual book properly for future use. Note: Our Company reserves the right to revise the design and description of this product without any further notice. Please refer to the actual color of this product.

CONTENTS

Important Safety Instruction Instructions De Securite Importantes Use safety warning Name and function of components Function Remote interface introduce Method of usage

1.Switch power supply on

2.Second, the hand control massage function control operation

3.Turn off power, stop massage

4.Fourth, support Apple and Android tablet system, operation control massage chair

5.Five, tablet system operation, turn on the whole machine power

6.Sixth, tablet computer massage function control operation

7.Seven, tablet system operation, turn off the power, end the massage

8.Eight, handrail installation instructions

9.Nine, calf installation instructions

10.Ten, aromatherapy installation instructions

11.Head cushion and backrest pad's dismounting and use manual

12.Floor protection

13.Method of movement

Product specification

02 04 06-07 08 09-10 11-12 13 13

13-33 34 35

36 37-47 47

48-49 50-51 52 53 53 54 55

Important Safety Instruction Important Safety Instruction

When using an electrical appliance, basic precautions should

always be followed, including the following:

Read all instructions before using (this appliance)

DANGER-To reduce the risk of electric shock:

1) Always unplug this appliance from the electrical outlet immediately after

using and before cleaning.

WARNING-To reduce the risk of burns, fire,

electric shock, or injury to Persons:

1) An appliance should never be left unattended when plugged in. Unplug

from outlet when not in use, and before putting on or taking off parts.

2) Do not operate under blanket or pillow. Excessive heating can occur and

Cause fire, electric shock, or injury to persons.

3) Close supervision is necessary when this appliance is used by, on, or near

children, invalids, or disabled persons.

4) Use the appliance only for its intended use as described in this manual.

Do not use attachments not recommended by the manufacturer.

5) Never operate this appliance if it has a damaged cord or plug, if it is not

working properly, if it has been dropped or damaged, or dropped into

water. Return the appliance to a service center for examination and repair.

6) Do not carry this appliance by supply cord or use cord as a handle.

7) Keep the cord away from heated surfaces.

8) Never operate the appliance with the air openings blocked. Keep the air

openings free of lint, hair, and the like.

9) Never drop or insert any object into any opening.

10) Do not use outdoors.

11) Do not operate where aerosol (spray) products are being used or where

oxygen is being administered.

12) To disconnect, turn all controls to the off position, then remove plug from

outlet.

13) The appliance is intended for household and indoor use only.

14) Connect this appliance to a properly grounded outlet only ,see grounding

instructions .

15)Keep children away from extended foot support (or other similar parts

16)Do not use massager in close proximity to loose clothing or jewelry.

17)Keep long hair away from massager while in use.

18)Connect this appliance to properly grounded outlet only. See Grounding

Instructions.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

This product must be grounded, if it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock, this product is equipped with a cord having an equipment grounding conductor and a grounding plug, the plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the equipment grounding

conductor can result in a risk of electric shock, check with a qualified electrician or serviceman of you are in doubt as to whether the product is properly grounded, do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

1)This product is for use on nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in sketch on the page 17, A temporary adapter that looks like the adapter illustrated in sketches B and C may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available the temporary adapter should be used only until a properly grounded outlet (shetch A )can be installed by a qualified electrician, the green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover, Whenever the adapter is used, it must be held in place by a metal screw.

0302

Instructions De Securite Importantes Securite Et Entretien

lors de l'utilisation d'un appareil électrique, des précautions de bases doivent être respectées, y compris ce qui suit : Lisez toutes les instructions avant d'utiliser l'appareil.

DANGER- Pour réduire le risque de choc électrique:

1) Toujours débrancher cet appareil de la prise électrique immédiatement après usage et avant nettoyage

AVERTISSEMENT- Pour réduire le risque de brûlures, d'incendie, de choc

électrique ou de blessures:

1) Cet appareil ne doit jamais quittervotre surveillance lorsqu'il est branché. Débranchez le de la prise lorsqu'il estinutilisé, et avant de placer ou d'enlever des pièces.

2) Ne pas utiliser cet appareil sous une couverture ou un oreiller. Une chaleur excessive peut provoquer un incendie, un choc électrique ou des blessures corporelles.

3) Soyez prudent et maintenez une surveillance accrue lorsque cet appareil est

utilisé par, sur, ou près des enfants, de personnes invalides ou handicapées.

4) Utilisezl'appareil uniquement pour un usage habituel, comme décrit dans ce manuel. Ne pas utiliser d'accessoires non recommandés par le fabricant.

5) Ne jamais faire fonctionner cet appareil si le cordon ou la fiche sont

endommagés, s'il ne fonctionne pas correctement, s'il est endommagé ou s'il est tombé dans l'eau. Retournez l'appareil auservice technique pour examen et réparation.

6) Ne transportez pas cet appareil par le cordon d'alimentation ou d'utilisation

comme une poignée.

7) Gardez le cordon loin des surfaces chauffées.

8) Ne jamais faire fonctionner l'appareil en obstruant les ouvertures d'air. Gardez les ouvertures à l'air, libre de peluches, de cheveux, etc.

9) Ne jamais laisser tomber, ou insérer d'objet dans les ouvertures.

10) Ne pas utiliser à l'extérieur.

11) Ne pas utiliser dans les lieux où des aérosols (vaporisateurs) sont utilisés, ni là

où l'oxygène est administré.

12) Pour débrancher, mettre tous les boutons de l'appareil sur la position arrêt, puis

retirer la fiche de la prise.

13) L'appareil est destiné à un usage domestique et à l'intérieur seulement.

14) Connectez cet appareil à une prise correctement reliée à la terre. Voir les

instructions de mise à la terre.

15) Éloignez les enfants du support de pied ouvert (ou des autres pièces semblables).

16) Ne pas utiliser de massage à proximité des vêtements amples ou des bijoux.

17) Garder les cheveux longs à l'écart de masseur en cours d'utilisation.

18) Raccordez cet appareil à une prise correctement mise à la terre.

CONSERVER CES INSTRUCTIONS

INSTRUCTIONS DE BASES

Ce produit doit être relié à la terre. Si il dysfonctionne ou tombe en panne, la terrefournit un chemin de moindre résistance pour le courant électrique afin de réduire le risque de choc électrique. Cet appareil est équipé d'un cordon avec un conducteur de mise à la terre des équipements et une prise de terre. La fiche doit être branchée dans une prise appropriée qui est correctement installée et mise à la terre conformément à la règlementation locale.

DANGER: un mauvais branchement de l'équipement à la prise de terre, peut

entraîner un risque de choc électrique. Consultez un électricien qualifié si vous avez des doutes quant à savoir si le produit est correctement mis à la terre. Ne pas modifier la fiche fournie avec le produit si elle ne rentre pas dans la prise. Adressez vous à un électricien qualifié le cas échéant.

1)Ce produit est destiné à être utilisé sur un circuit de 120 volts, et possède une

fiche de mise à la terre semblable à la fiche illustrée sur le croquis de la page 17. Un adaptateur temporaire qui ressemble à l'adaptateur illustré sur le croquis B et C peut être utilisé pour brancher cette fiche à un réceptacle 2-pole, comme indiqué sur le croquis B. Si une prise de terre n'est pas disponible, l'adaptateur temporaire ne doit être utilisé que jusqu'à une prise de terre correcte (croquis A) pour être installé par un électricien qualifié. L'oreille rigide de couleur verte, qui dépasse de l'adaptateur, doit être connectée à une terre permanente comme un couvercle de boîte de sortie mise à la terre. Chaque fois que l'adaptateur est utilisé, il doit être maintenu en place par une vis en métal.

S'il vous plaît noter que lorsque ne pas coincer votre détection des doigts Avant le nettoyage ou la réparation doivent couper l'alimentation

0504

Use safety warning Use safety warning

Warning

·When the footrest lifting, people should not apply pressure on the footrest to avoid the massage chair falling forward to damage the product or cause personal injuries

Prohibit pressing

Warning

·Before sitting on the massage chair, Please make sure the massage hand cannot

place in the seat position, so as avoiding the massage hand to damage the product or cause personal buttocks injuries.

Warning

·Do not strive to pull out the control cable or power cord during standby or power-

onstate to avoid product damaged or electrocution accidents. Advise you unplug the controller cable and power cord and put away after you use the chair.

Warning

·When turning on the zero-gravity lying function, be sure to notice whether there are children or pets under the massage table under the bottom of the calf and the backrest to stay or play to avoid product damage and personal injury.

06 07

Name and function of components

Function

1 2

4 5 6

7 8 9

10 11 12

·This product is designed with a set of intelligent 4D massage hand that can walk

up and down, front and rear telescopic, and silent design

·The design has automatic detection and micro-adjustment function of the shoulder

position; the human body curve and the automatic detection function of the massage finger pressure point automatically adjust the amount of the front and

rear movement of the manipulator according to the detected human body curve and the massage finger pressure point, so that the massage is more humanized and scientific. .

·Features automatic massage function: six kinds of automatic massage functions

such as Shujing Active, Beautiful Butt Shaped, Sleeping Massage, Neck and

Shoulder Relaxation, Back Stretching and Breathing.

·There are three special massage functions: Blu-ray bath, fragrant health, music

SPA.

·There are three kinds of custom storage functions: Custom Storage I, Custom

Storage II, Custom Storage III.

1.Space capsule cover

2.Blue LED soothing light

3.Star top

4.Pillow pad

5.3D digital audio and aromatherapy export

6.Upper arm air pressure component

7.Arm pressure component

8.Shortcuts

9.USB charging jack

10.Buttocks air pressure component

11.Seat cushion

12.Leg rest

13.Foot rest

14.LED mood light

15.Back cushion

16. Controller

17.Handrail

18.Side cover

19.Back cover

20.Aromatherapy entrance

21.Handrail decoration

22.Drive cover

23.Caster wheel

24.Power cord and plug

25.Controller socket

POWER INPUT

FUSE: F4AL 250VCONTROLLER JACK

26.Power switch

27.Fuse box

28.Power cord socket

·The upper body manually selects the massage function: there are five kinds of

massage position selections such as full stroke, partial, fixed point, upper back and lower back; shoulder lifting, kneading, tapping, shiatsu, kneading and tapping synchronization and 4D six massage techniques; The massage technique has five speeds that can be adjusted; in the state of tapping and shiatsu massage, the robot massage ball has five widths to adjust.

·With air pressure massage function: arm air pressure massage function (built-in 8

airbags), upper arm air pressure massage function (built-in 4 airbags), back air pressure massage function (built-in 4 airbags), leg air pressure massage function (built-in 22 Airbag), foot air pressure massage function (built-in 18 capsules), air pressure massage function on both sides of the seat cushion (12 airbags built-in), seat cushion air pressure massage function (built-in 4 airbags), and third-speed air pressure intensity adjustment.

·It features back heat therapy and leg heat therapy: carbon fiber is used as a far

infrared heat source.

·The backrest frame is laid down with slide rail technology to keep the backrest

away from the wall at all times, saving space.

·It has a waist swing massage function: it uses the waist pressure to swing around

to form a twist massage function, which relieves sedentary and causes waist muscle tension.

·Shortcut button on the right armrest: open button, backrest and calf position

adjustment button, heating button, star top button, aroma button, zero gravity button, calf extension button, calf shortening button, air pressure mode button, automatic mode button, etc. hot button.

·It has two kinds of adjustment functions: lower leg lifting adjustment, linkage lifting

adjustment, zero gravity I or zero gravity II.

251526 27 28

08 09

Function

Remote interface introduce

·The foot is equipped with a foot roller massage function. The two sets of rollers roll

and scrape the foot and the foot, and the heel has a number of massage bumps to massage the heel.

·The calf is equipped with the function of automatically detecting the length of the

foot. When the calf is raised or lowered to a suitable angle, the calf will detect the length of the foot and detect the most comfortable massage part.

·The backrest guide adopts the curved guide rail technology, which fully fits the

curve of the back of the human body, and can enjoy the body massage from the head to the thigh.

·There are 8 natural energy magnets in the leg airbag belt.

·Configure the LED mood lights on the left and right upper arms.

·A USB charging function is provided on the right armrest.

·It has a space capsule cover that rotates up and down.

·It features a blue sky treatment for starry sky.

·Aromatherapy function

·Configure TFT color screen hand controller

·Smart terminal devices (such as mobile phones or tablets) can use the APP

software to control the massage chair via Bluetooth.

·Built-in 3D digital audio on the upper arm, Bluetooth music function, you can also

connect your favorite music through Bluetooth (Bluetooth name: IMCM-XXXX) via smart device (such as mobile phone or tablet).

·The headrest cushion is double-layered, and the number of layers can be

determined according to your needs, so as to reduce the neck and shoulder massage, which is suitable for different people to choose.

Controller display section

2 3

Auto-Hip shaping

5 6 7

ZERO

11 12 13

Speed

Adjustment

Shoulder

Intensity

Arms air

Lower air

Width

Note: The manual display shows the color, massage function and massage function icon layout order, please refer to the physical display!

19 20 21

1.TFT LCD display

2.Massage function status bar

3.Star top display

4.Aromatherapy display

5.Time display

6.Zero gravity display

7.The back stretch display

8.Arm pressure display

9.Leg and foot pressure display

10.The foot roller display

11.Speed adjustment

12.Adjust

13.Shoulder position adjustment

14.Bluetooth display

15.The method display

16.Massage position display

17.Hyperthermia display

18.Width adjustment

19.Massage intensity adjustment

20.Arm pressure adjustment

21.Lower body pressure regulation

22.The information bar

1110

Method of usage

·When you select any of the automatic modes, the backrest and calf position will be adjusted to the set angle.

·After adjusting the angle, the massage chair automatically performs the shoulder position and body shape detection (Note: Shujing Active only detects the shoulder position, other modes are full body type detection and shoulder position detection), waiting for the test to be completed. If you press the "Enter" button, skip the shoulder position and body type detection steps, and directly turn on the default value to start the massage.

Lying angle adjustment

Attention! Ensure that there are no objects around the massage chair.

Body Sensing

Just a moment......

·After detecting the shoulder position, the buzzer prompts “Drip”. If it is different from the actual shoulder position, you can adjust it to the appropriate position by pressing “Up” or “Down”. The shoulder position is adjustable in 11 steps. With no shoulder position adjustment within 10 seconds, the massage function is automatically entered. Or press the "Enter" button to enter the massage immediately. Or the shoulder position is not detected, then the default shoulder position height is massaged.

Shoulder Adjust

·Under the current interface, you can use the navigation button to select “Adjust” or “Shoulder

Auto-Hip shaping

Position”. After selecting the function to be set, press “Enter” to enter.

ZERO

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

3).Pause button

·While the massage function is running, press the “Pause button” to temporarily stop all massage functions; press the “Pause button” again to continue the massage function before the pause. If the pause time exceeds 20 minutes, all massage functions are automatically turned off.

Auto-Hip shaping

ZERO

Speed

Adjustment

Shoulder

“Up & Down” to select,“OK”to confirm.

Width

Intensity

Arms air

Lower air

Speed

Adjustment

Shoulder

Time Out

ZERO

Width

Intensity

Arms air

Lower air

Button

·High shoulder position

·Suitable shoulder position

·Low shoulder position

Description

Move the massage balls upward to a suitable position.

Move the massage balls downward to a suitable position.

4).Menu button

·Press “Menu” to enter the main menu massage function selection interface, including automatic program, special massage, manual mode, adjustment, customization, setting, device data and other functional interfaces.

·Press “Up” or “Down” to select the massage function, press “Enter” to confirm the selected massage function. Press “Back” to return to the selection function running status information interface

1514

Remote interface introduce

Method of usage

Controller button section

3 4

16 17

1.Pause button: Pause the current function.

2.Power button: Open and close the massage chair.

3.Up button: The navigation button is up.

4.Confirmation button: Confirmation button.

5.Left button: The navigation button is to the left.

6.Right button: The navigation button is to the right.

7.Down button: The navigation button is down.

8.Menu button: Enter the main menu interface.

9.Automatic button: enter the automatic mode selection interface.

10.Adjustment button: Enter the adjustment function selection interface.

11.Back button: Return to the function information interface.

12.Manual button: Enter the manual function selection interface.

13.Heating button: Turns the heating function on or off.

14.The calf rise button: adjust the calf rise.

15.The calf down button: adjust the calf down

16.Zero gravity 1 button: massage chair angle adjusted to zero gravity 1.

17.Zero Gravity 2: The angle of the massage chair is adjusted to zero gravity 2.

18.Stand up button: massage chair linkage stand up.

19.Lying on the button: massage chairs linked to lie down.

1.Switch power supply on

Diagram of plug in

Diagram of line

CONTROLLER JACK

FUSE: T5AL 250V

POWER INPUT

Diagram of the switch position of power supply

CONTROLLER JACK

FUSE: T5AL 250V

POWER INPUT

2.Second, the hand control massage function control operation

1).Standby

·After the massage chair is powered on and off, it cannot enter any mode operation in standby mode. Except for settings.

2).Start massage (Power button)

·Press the power button to start the massage, the backrest keeps the default position, the calf is slightly raised, waiting for the automatic mode to start the massage, the automatic mode is not selected within 5 minutes, and the massage chair automatically shuts down.

Select auto function

Activating collaterals

Hip shaping

Sleep aid massage

Neck & shoulder relaxation

Back waist stretch

1312

Method of usage Method of usage

Main menu

Automatic program

Featured massage

Manual mode

Adjustment

customize

Main menu

Manual mode

Adjustment

customize

Setting

Device Information

5).Automatic function (automatic button - can also directly press the “automatic button” to enter the automatic function interface)

·Press “Menu” to enter the main menu interface and select the automatic function icon: In the automatic mode, there are six automatic massage modes including Shujing Active, Beautiful Butt Shaped, Sleeping Massage, Neck and Shoulder Relaxation, Back Waist Stretching and Breathing.

Main menu

Automatic program

Featured massage

Manual mode

Adjustment

customize

“Up&Down” to adjust,“OK”to exit.

Select auto function

Activating collaterals

Hip shaping

Sleep aid massage

Neck & shoulder relaxation

Back waist stretch

Note: The automatic function has been selected and displayed in the status bar of the massage function. You can press the “back button” to view it operating status.

Function

Activating collaterals

Hip shaping

Sleep aid massage

Neck & shoulder relaxation

Back waist stretch

Breath conditioning

Description

Activating collaterals massage function is mainly used to massage the neck, shoulder, back, waist, buttocks, etc. by means of massage, finger pressure, squatting and tapping; and combined with the foot roller and the leg airbag squeeze type, The body is fully massaged. Effectively promote the body's meridians, eliminate fatigue, promote blood circulation, improve the body's immunity, relieve muscle fatigue and soreness. Relax, relieve stress and improve sleep quality. At the same time, it is accompanied by a voice broadcast to explain the function of Shu Jing active massage.

Taking the buttocks as the massage focus, the hips are shaken and shaken, and the airbags are squeezed together. The hips are swayed and squeezed to effectively relieve the muscles of the buttocks, relieve the sedentary muscles of the buttocks, regulate blood circulation, tighten the buttocks. . Swinging jitter consumes excess fat and elasticity, making the buttocks muscles strong and body-building, with a beautiful arc to reach the perfect female curve beauty.

With a light and gentle method, deep massage on the human body can effectively improve sleep and improve sleep.quality, conditioning the body balance, relaxing body and mind, soothe sleep.

Focus on the neck and shoulders, lift the neck, knead, shoulder beat, smash and other methods on the neck and shoulders massage. It has open and occluded neck and shoulder, activating blood circulation and relieving pain, and relieving neck and shoulder pain.

With the back of the back as the massage focus, the back of the back with a shiatsu massage, tamper, back traction and other massage hands the method effectively clears the back and waist meridians, promotes the circulation of the back and back, and relieves the fatigue and soreness of the lumbar muscles.

The breath conditioning massage function is mainly combined with kneading, massage, tampering, tapping, lifting and waist balloon extrusion. The neck, shoulders, back and waist massage of the human body, in which the neck and shoulders are mainly kneaded, lifted, smashed and other massage techniques, can alleviate the long-term head or overwork and lead to stiff muscles, soreness and elimination of the neck and shoulders. fatigue. The back waist is mainly based on finger pressure, squeaking and massage. It can dredge the back and meridians, promote blood circulation in the waist and improve back pain. At the same time, relieve anxiety, calm emotions, regulate the breath, and quickly sleep as a dream.

1716

Method of usage Method of usage

01).Automatic function (featured massage)

·Press “Menu” to enter the main menu interface, select the special massage

function icons: including blue bath therapy, incense health, music SPA and other three special massage modes.

Featured massage

Blue bath therapy

Health

Music spa

Function

Main menu

Automatic program

Featured massage

Manual mode

Adjustment

customize

“Up&Down” to adjust,“OK”to exit.

Description

After the blue bath massage function is turned on, the massage chair automatically lies, so that the human body maintains zero gravity,

Blue bath therapy

and then cooperates with the blue bathing function on the top of the starry sky. The blue can slow down the heart rhythm, adjust the balance, and eliminate the tension, with the starry sky LED The light and dark adjustment, the user with the light conditioning breathing combined with gentle kneading massage techniques to relieve the body and mind, release stress, relieve fatigue.

After opening the fragrant health massage function, the massage

Health

chair is automatically lying down, so that the body is in a state of balance and relaxation, and then combined with massage and air pressure to massage the body in all directions, combined with the unique aromatherapy, the aroma can make people Balance emotions, relax, help sleep, relax muscles, balance body and mind

6).Manual ( Manual button- also can press” Manual” to directly enter manual mode surface)

·Press “Menu” to enter the main menu interface and select the manual mode icon: including massage technique, massage part, air pressure, and other massage functions.

·Press “Left button” or “Right button” to switch the submenu, then press “Up” or “Down” to select the massage function, press “Back” to return to the running status information interface.

Main menu

Automatic program

Featured massage

Manual mode

Adjustment

customize

“Up&Down” to adjust,“OK”to exit.

Manual mode

Wise

Stop

Knead

Flap

Knead&Flap

Manual mode

Massage Area

Spot

Partial

Full back

Upper back

Manual mode

Arm pressure

Buttock pressure

Leg pressure

Full pressure

Manual mode

Air

off on

Heating

Foot roller

Arom

Star top

Others

off on

SPA Music spa

After opening the fragrant health massage function, the massage chair is automatically lying down, so that the body is in a state of balance and relaxation, and then combined with massage and air pressure to massage the body in all directions, combined with the unique aromatherapy , the aroma can make people Balance emotions, relax, help sleep, relax muscles, balance body and mind

1918

Method of usage Method of usage

01).Manual Mode ( Manual button-mode)

·Manual mode (manipulation): including six different massage techniques such as

stopping, kneading, tapping, kneading, finger pressing, 4D, and shoulder lifting. In the state of tapping and finger pressing, the width of the massage ball can be adjusted.

·Press “Up” or “Down” to select the function function icon, press “Enter” to confirm the

selected massage method.

Speed

Adjustment

Shoulder

Manual mode

Width

Intensity

Arms air

Lower air

Manual mode

Wise

Stop

Knead

Flap

Knead&Flap

Note:Massage intensity: 4D massage intensity, that is, the robot is extended forward or the whole is retracted. The intensity of the massage is adjusted in the intensity of a certain massage area, not the strength of the full back. Boot detection full body type, the intensity of each massage point has been tested, if you feel the intensity of a certain massage point needs to be adjusted, adjust with this button. The massage intensity can be adjusted at any time in both automatic and manual conditions.

Function

4D massage

Kneading

Description

Four types of 4D modes are subdivided, and the speed and intensity are adjustable.

Speed and strength are adjustable.

Display

4D 4D 4D 4D

02)Manual mode (manual button - massage area)

·Manual mode (massage area): Massage, fixed, partial, full back, upper back, lower

back and other massage functions.

·Press the “Up” or “Down” button to select the area function icon and press the

“Enter” button to confirm.

Speed

Adjustment

Shoulder

Speed

Adjustment

Shoulder

Manual mode

Width

Intensity

Arms air

Lower air

Manual mode

Width

Intensity

Arms air

Lower air

Speed

Adjustment

Shoulder

Manual mode

Massage Area

Spot

Partial

Full back

Upper back

Manual mode

Width

Intensity

Arms air

Lower air

Manual mode

Speed

Adjustment

Shoulder

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

Manual mode

Width

Intensity

Arms air

Lower air

Kneading &Tapping

Lifting the shoulder

Tapping

Shiatsu

Speed and strength are adjustable.

Subdivide 2 kinds of tapping modes, speed, width and intensity are adjustable.

Subdivide two kinds of acupressure modes, with adjustable speed, width and strength.

Note: Selecting the stop icon stops all tactic functions; selecting the single tactic icon turns on the individual massage technique.

Function

Spot

Partial

Full back

Upper back

Lower back

Description

Fixed-point massage at a fixed point.

A small range of partial round

-trip massage.

When selecting the fixed point and partial massage techniques, the massage area can be adjusted with the up and down buttons.

Massage back and forth on upper back

Massage back and forth on lower back

Massage back and forth on full back

2120

Method of usage Method of usage

·Manual mode (other - sole roller)

·Select to turn the foot roller massage function on or off by pressing the "Enter"

button.

·Press “Up” or “Down” to select other massage functions, press “Back” to return to

the running status information interface.

Manual mode

Others

Heating

Foot roller

Star top

“Left&Right” to select sub menu, “Up&Down” to select,“OK” to confirm.

Arom

off on

Auto-Hip shaping

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

· AromManual mode (other - )

·Select to turn the aromatherapy function on or off by pressing the "Enter" button.

·Press “Up” or “Down” to select other massage functions, press “Back” to return to

the running status information interface.

Auto-Hip shaping

Manual mode

Others

Heating

Foot roller

Star top

“Left&Right” to select sub menu, “Up&Down” to select,“OK” to confirm.

Arom

off on

Auto-Hip shaping

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

·Manual mode (other - star top)

·Select to turn the star top function on or off by pressing the "Confirm" button.

·Press “Up” or “Down” to select other massage functions, press “Back” to return to

the running status information interface.

Manual mode

Others

Heating

Foot roller

Star top

“Left&Right” to select sub menu, “Up&Down” to select,“OK” to confirm.

Arom

off on

Auto-Hip shaping

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

7).Adjustment function (adjustment button - you can also directly press the “adjustment button” to enter the adjustment function interface)

·Press “Menu” to enter the main menu interface, select the adjustment function

icon: including massage techniques, massage area, intensity, other (currently only timing) and other adjustment functions.

·Press “Left button” or “Right button” to switch the submenu function, select the

massage function in the menu, press “Up” or “Down” to select the function to be adjusted, press “Enter” to confirm, or press “Back”. Return to the running status information interface.

Main menu

Automatic program

Featured massage

Manual mode

Adjustment

customize

Adjustment

Wise

Speed

Intensity

“Up&Down” to adjust,“OK”to exit.

2524

Method of usage Method of usage

03).Manual mode (manual button - air pressure)

·Manual mode (air pressure): including arm pressure, buttock pressure, leg pressure, and full air pressure massage.

·Press “Up” or “Down” to select different air pressure massage functions, press “Enter” to confirm.

Manual mode

Arm pressure

Buttock pressure

Leg pressure

Full pressure

Manual mode

Speed

Adjustment

Shoulder

Air

Width

Intensity

Arms air

Lower air

off on

Manual mode

Width

Intensity

Arms air

Lower air

Speed

Adjustment

Shoulder

Speed

Adjustment

Shoulder

Speed

Adjustment

Shoulder

Manual mode

Width

Intensity

Arms air

Lower air

Manual mode

Width

Intensity

Arms air

Lower air

04).Manual mode (manual button - Others)

·Manual mode (others): including massage, foot roller, aromatherapy, star top and other massage functions.

·Press “Up” or “Down” to select the massage function, press “Enter” to turn the massage function on or off.

Main menu

Automatic program

Featured massage

Manual mode

Adjustment

customize

“Up&Down” to adjust,“OK”to exit.

Manual mode

Heating

Foot roller

Arom

Star top

Others

off on

·Manual mode (other - Heating)

·Press the “Confirm” button to turn on or off the back and leg hyperthermia function

at the same time, heating to the far-infrared hyperthermia function, and warming after 3 minutes.

·Press “Up” or “Down” to select other massage functions, press “Back” to return to the running status information interface.

Manual mode

Others

Heating

off on

Auto-Hip shaping

Function

Arm pressure

Buttock pressure

Leg pressure

Full pressure

Description

Turn the arm pressure massage function on or off.

Turn the buttock pressure massage function on or off

Turn the leg pressure massage function on or off

Turn the full pressure massage function on or off

Arom

off on

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

Foot roller

Star top

“Left&Right” to select sub menu, “Up&Down” to select,“OK” to confirm.

Note: The heating function can also be used to directly turn the heating function on or off by pressing the “heat button”.

2322

Method of usage Method of usage

Adjustment

Massage Area

Adjustment

Intensity

Arms air

Lower air

Foot roller

Adjustment

Others

01).Adjustment function (adjustment button - technique)

·Adjustment function (method): The massage technique adjustment function includes speed, width, massage intensity and other massage function adjustments.

·Press the “Up” or “Down” button to select the speed or width function, and press the “Enter” button to adjust the speed, width and intensity.

Adjustment

Wise

Speed

Width

Intensity

Speed

Width

Intensity

Adjustment

Wise

Adjustment

Wise

Speed

Width

Intensity

02).Adjustment function (adjustment button - massage area)

·Adjustment function (massage area): In the state of fixed point or partial massage area, press and hold the "up button" to release the massage robot and walk up, stop and stop; press and hold the "down button" to release the massage robot down Walk, release and stop.

·Press the “Up” or “Down” button to adjust the massage area.

Adjustment

Massage Area

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

Adjustment

Massage Area

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

03).Adjustment function (adjustment button - strength)

·Adjustment function (strength adjustment): including arm air pressure, lower body

air pressure, and foot roller, a total of 3 speeds can be adjusted.

· Press “Up” or “Down” to select the air pressure or the wheel strength, and press

“Enter” to adjust the intensity.

Adjustment

Intensity

Adjustment

Intensity

Adjustment

Intensity

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

Note:

·Speed: The speed of the massage of the robot is adjustable, a total of 5 levels.

·Width: In the stop, tap, and acupressure, the width can be adjusted, a total of 5 levels.

Arms air

Lower air

Foot roller

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

Arms air

Lower air

Foot roller

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

2726

Arms air

Lower air

Foot roller

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

Method of usage Method of usage

01).Settings (language)

·Settings (Language): Sets both Chinese and English.

·Press “Up” or “Down” to select the language type and press “Enter” to confirm.

02).Settings (lock screen)

·Settings (lock screen):

include time or never lock screen.

·Press the “Confirm” button

to adjust the lock screen time. Each time you press the “Confirm” button, the lock screen time is increased by 15 seconds, 30 seconds, 1 minute, 2 minutes, 3 minutes or never lock the screen. Press the “Confirm” button to cycle.

Setting

Language

English

Chi na

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

Setting

Lock Screen

Sleep

Sleep after 02 S of inactivity

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

Setting

Language

English

Chi na

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

Setting

Lock Screen

Sleep

Never

Never sleep

10). Device information

·Press “Menu” to enter the main menu interface and select the device information function to display the current device information.

·Press “Up” or “Down” to select and press “Enter” to confirm. Or press "Back" to return to the running status information interface.

Main menu

Manual mode

Adjustment

customize

Setting

Device Information

11 11 11 11 11 1

Code

11). Zero gravity button

·Press “Zero Gravity I” or “Zero Gravity II” to automatically adjust the position of the

calf and backrest to the zero gravity position. There are two different zero-gravity lying modes, which can be freely selected.

Auto-Hip shaping

ZERO

Auto-Hip shaping

ZERO

03).Settings (backlight)

·Set (backlight) brightness, press “Enter” to adjust the brightness, a total of 5 brightness can be adjusted.

·Press the Back button to return to the Run Status Information screen.

Setting

Back Light

Light

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

Button

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

Speed

Adjustment

Shoulder

“Up & Down” to select,“OK”to confirm.

Width

Intensity

Arms air

Lower air

Description

Zero Gravity I: Automatically adjusts the position of the calf and backrest to the zero gravity I position.

Zero Gravity II: Automatically adjusts the position of the calf and backrest to the zero gravity II position.

3130

Method of usage Method of usage

04).Adjustment function (adjustment button - other adjustments)

·Adjustment function (other adjustments), currently only

timing. Each time you press the “Confirm” button, it will be superimposed in 5 minutes. If it is more than 40 minutes, it will be subtracted by 40 minutes.

·Press the “Confirm” button to adjust the time (the time for

each press of the “Confirm” button is increased by 5

Time Setting

minutes, the minimum is 5Min, the maximum is 40Min, and the cycle is repeated).

"Left&Right" to select sub menu, "Up&Down" to select,"OK" to confirm.

8).Custom

·Press “Menu” to select “Custom” function under the

main menu, enter the custom interface and select the custom storage I, II, III storage or calling function.

·Select the archive or application via “Left Button” or

“Right Button” and select “Confirm” to confirm.

·Select Custom Storage I, Custom Storage II, and

Custom Storage III via Up or Down.

·Storage: Store all current tactics, air pressure, angles,

and other massage functions.

·Call: Recall the previously stored techniques, air

pressure, angle, and other massage functions.

·Press “Back” to return to the running status information

interface.

Customise

iMemory I

iMemory Ⅲ

Use Save

Customise

iMemory I

iMemory Ⅲ

Use Save

Automatic program

Featured massage

Manual mode

Adjustment

Others

Main menu

9).Setting

·Press “Menu” to enter the main menu interface, select “Settings” function icon, enter the setting interface including language, backlight, lock screen and other setting interface.

·Press "Left button" or "Right button" to switch the submenu. Press "Up" or "Down" to select the function, or press "Back" to return to the running status information interface.

Light

Setting

Back Light

Main menu

Manual mode

Adjustment

customize

Setting

Device Information

Setting

Lock Screen

Sleep

Sleep after 02 S of inactivity

Setting

Language

English

Chi na

Adjustment

customize

2928

Method of usage Method of usage

12). Heat button

·Press the “heating button” to turn on or off the back and calf hyperthermia function at the same time; after the thermotherapy function is turned on, the information interface displays the heating icon, and the heating is the far infrared hyperthermia function, which is warm after 3 minutes.

Auto-Hip shaping

ZERO

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

13). Back button

·To adjust the massage function, if you need to return to the main interface, press

this button to return to the operation status information interface.

Auto-Hip shaping

ZERO

Speed

Adjustment

Shoulder

Width

Intensity

Arms air

Lower air

14).Lying angle adjustment button

Button

Calf up button: Press and hold this button to slowly raise the calf frame, release to stop rising; the calf frame rises after the completion, the calf will automatically detect the length of the foot.

Calf down button: Press and hold this button to slowly lower the calf frame, release to stop falling; lower leg rest after the completion, the calf will automatically detect the length of the foot.

Link up button: press and hold this button, the backrest frame rises slowly, while the calf frame slowly descends, and the release stops the backrest frame rises or the lower leg frame descends; after the joint kick-up action is completed, the calf will automatically detect the length of the foot.

Linking lying button: Press and hold this button to slowly lower the backrest frame, while the calf frame slowly rises and the release stops the backrest frame is lowered or the calf frame is raised; after the joint lying movement is completed, the calf will automatically detect the length of the foot.

15).Handrail shortcuts

Button

Power button: Press this button to turn the massage function on or off.

Link up button: Turn this button counterclockwise to slowly raise the backrest frame, while the calf frame slowly descends. Stop the rotation to stop the back frame rise or the lower leg frame to fall; after the joint kicking action is completed, the calf the length of the foot will be automatic ally detected.

Linked lying button: Turn this button clockwise to slowly lower the backrest frame, while the calf frame rises slowly.Stop the rotation to stop the fall of the back frame or the rise of the lower leg frame; after the joint lying movement is completed, the calf The length of the foot will be automatically detected.

Description

Heating button: turn on or off the heating and heat treatment function, heating to far infrared heat therapy function, open for 3 minutes After the warmth.

Aromatherapy button: Turns the aromatherapy function on or off.

3332

Method of usage Method of usage

Star Top button: Turns the star blue top physiotherapy function on or off.

Zero gravity button: Each time the button is pressed, the position of the calf frame and the back frame is automatically adjusted to the zero gravity position. there are two zero-gravity lying modes, which are cyclically switched.

Calf stretch button: Press and hold this button to manually adjust the footrest to slowly elongate, and release to stop.

Calf shortening button: Press and hold this button to manually adjust the footrest to slowly shorten, and release to stop.

Auto mode button: Each time you press it, the auto massage function switches.

Air pressure button: Air pressure mode selection.

USB jack: USB charging port, which can charge smart devices (such as mobile phones).

3.Turn off power, stop massage

·During the massage process, press the power switch button to immediately turn off all massage functions, the back of the chair and the foot pad are reset, the massage time is up, and all massage functions are immediately turned off, and the back and foot pads are not reset.

·Cut off the power supply of the whole machine, the figure (schematic diagram of the whole machine power cut).

CONTROLLER JACK

FUSE: T5AL 250V

POWER INPUT

CONTROLLER JACK

FUSE: T5AL 250V

POWER INPUT

4.Fourth, support Apple and Android tablet system, operation control massage chair

Application interface

1.Massage status information display area

2.Function button

3.witch

4.Linkage adjustment

5.Calf adjustment

6.Zero gravity

7.Intensity adjustment

8.Start/Pause button

1). Preparation before use

01) Installer download and installation

·Download the installer by the installer provided by the installer or by the network

download address provided by the dealer.

·Connect the tablet to the computer with a data cable, and install the installer to the

tablet via tablet software (such as iTunes for Apple, software for software such as Android). After the installation is successful, the application will be displayed in the app list of the tablet.

Schematic diagram of the whole machine power turning off.

Schematic diagram of unplugging the whole machine wiring. Schematic diagram of unplugging the power plug.

3534

Method of usage Method of usage

2). Bluetooth connection

·Turn on the power switch of the massage chair and automatically turn on the

Bluetooth function.

·From the tablet home screen, open the application list and select Settings to open

the settings screen.

·Turn on the Bluetooth function → select Bluetooth settings → click to find the

accessory device “Bluetooth name: IMCM-XXXX” icon, click the “IMCM-XXXX” icon to pair the tablet Bluetooth module with the massage chair Bluetooth module (the pairing password is “0000”) ), after successful pairing, click the “IMCM-XXXX” icon to connect the Bluetooth module of the tablet to the Bluetooth module of the massage chair. After the connection is successful, the application can be used to control the massage chair.

3).Bluetooth module abnormality problem and solution

·If the Bluetooth pairing is successful, if you can't connect with the Bluetooth module of the massage chair, please try to cancel the Bluetooth pairing, and then turn off the power of the massage chair and then turn on the power of the massage chair again, then repeat the Bluetooth pairing according to the above Bluetooth connection method.

·The Bluetooth display has been connected successfully, but the massage chair cannot be controlled normally after entering the application, or the message prompt bar displays “Bluetooth not connected”. This status is abnormal for the Bluetooth module. You need to exit the application to reconnect the Bluetooth module, or turn off the massage. After the chair is powered on and then the power of the massage chair is turned back on, the Bluetooth pairing and connection are re-established according to the above Bluetooth connection method.

5.Five, tablet system operation, turn on the whole machine power

·After confirming that the massage chair power switch is off, connect one end of the

power cord to the massage chair, and then plug the power cord into a wellgrounded power outlet. Then switch the massage chair power switch to the on state.

6.Sixth, tablet computer massage function control operation

1).Start the massage

·From the tablet home screen, open the application list and click the app “ ” icon to launch the massage chair control app.

·After launching the application, enter the startup interface, click “ ” to start the massage, while the backrest keeps the default position and the calf is slightly raised.

·Enter the waiting to select the automatic mode, select an automatic mode and start the detection. If the automatic mode is not selected within 5 minutes, the massage chair will automatically shut down. Note: Shujing Active only detects the height of the shoulder position, and other automatic modes detect the full body shape and shoulder height.

Boot interface

·When you select any of the automatic modes, the backrest and calf position will be adjusted to the set angle.

·After adjusting the angle, the massage chair automatically performs the shoulder position and body type detection (Note: Shujing Active only detects the shoulder position, other modes are full body type detection and shoulder position detection), waiting for the test to be completed. If you press the “ ” button, skip the shoulder position and body shape detection steps and directly turn on the default value to start the massage.

Please select automatic mode

Diagram of plug in

Diagram of line

CONTROLLER JACK

FUSE: T5AL 250V

Diagram of the switch position of power supply

CONTROLLER JACK

POWER INPUT

FUSE: T5AL 250V

POWER INPUT

Lying angle adjustment display interface

Shoulder position and massage finger pressure detection interface

3736

Method of usage Method of usage

01). Shoulder position adjustment

·Automatically perform human shoulder position and massage finger pressure point

detection, waiting for the test to be completed.

·After the test is completed, enter the shoulder massage position adjustment

interface and make a “DiDi...” prompt tone. If it differs from the actual shoulder position, you can adjust it to the appropriate position by pressing the “Up” or “Down” button. The shoulder position is adjustable in 11 steps. With no shoulder position adjustment within 10 seconds, the massage function is automatically entered. If the shoulder position is not detected, the default shoulder position height is massaged.

OK OK OK

Hi g h s h ou l de r p os i t i on

Su i t a bl e s ho u ld e r p o si t io n

Low shoulder position

Shoulder position adjustment button

Function description

Adjustment of shoulder massage position

Adjustment under the shoulder massage position

02).Massage function runs and pauses

·Under the massage information display interface, when the massage function is running, press the “Run/Pause button” to temporarily stop all massage functions and enter the massage function pause state; while the massage function is paused, press the “Run/Pause button” to continue. Run the massage function before the pause. If the pause time exceeds 20 minutes, all massage functions are automatically turned off.

Button

In the running state, press this button to pause all current massage functions.

In the pause state, press this button to continue the massage function before the pause.

Function description

03).Upper body massage intensity

·Under the massage information display interface under massage work, click

the intensity adjustment icon to adjust the upper body back The massage intensity of the robot is divided into 5 steps.

Strength: 5 levels of strength can be adjusted

Two-speed

One-speed

Three-speed

Four-speed

Five-speed

04). Automatic massage

·Click the “ ” button icon to enter the automatic function selection interface, and click the automatic function icon to select the automatic massage mode. Speed and width are not adjustable during automatic massage.

3938

Method of usage Method of usage

Function

Activating collaterals

Hip shaping

Sleep aid massage

Neck & shoulder relaxation

Back waist stretch

Breath conditioning

Description

With a light and gentle method, deep massage on the human body can effectively improve sleep and improve sleep.quality, conditioning the body balance, relaxing body and mind, soothe sleep.

After the blue bath massage function is turned on, the massage chair automatically lies, so that the human body maintains zero gravity,

Blue bath therapy

After opening the fragrant health massage function, the massage chair is automatically lying down, so that the body is in a state of

Health

balance and relaxation, and then combined with massage and air pressure to massage the body in all directions, combined with the unique aromatherapy, the aroma can make people Balance emotions, relax, help sleep, relax muscles, balance body and mind.

After the music SPA massage function is turned on, the user can

connect music through Bluetooth, and combine the kneading, SPA Music spa

tapping massage technique and airbag squeeze massage function

to enjoy a relaxing massage with music. Appreciating music

effectively for a long time can relieve bad mental reactions, calm

down moods, cultivate temperament, change character and taste.

2).Manual massage

·Click the “ ” button icon to enter the manual massage function selection interface, select manual massage technique, back massage, speed and width function.

01) .Manual massage - technique, speed, width

·In the manual function selection interface, click the “ ” icon to enter the manual

massage function selection interface, including six different massage techniques such as kneading, tapping, kneading, finger pressing, 4D, and shoulder lifting. In the state of tapping and finger pressing, the width of the massage ball can be adjusted.

Speed

One-Speed

Width

One-Speed

Two-Speed

Speed: 5 levels of strength can be adjusted

Three-Speed

Four-Speed

Five-Speed

Width: 5 width adjustable

(in tapping and shiatsu massage state)

Four-Speed

Five-Speed

4140

Method of usage Method of usage

Note: Massage intensity: 4D massage intensity, that is, the robot is extended forward or the whole is retracted. The intensity of the massage is adjusted in the intensity of a certain massage area, not the strength of the full back. Boot detection full body type, the intensity of each massage point has been tested, if you feel the intensity of a certain massage point needs to be adjusted, adjust with this button. The massage intensity can be adjusted at any time in both automatic and manual conditions.

Function

4D massage

Kneading

Kneading &Tapping

Lifting the shoulder

Tapping

Shiatsu

Four types of 4D modes are subdivided, and the speed and intensity are adjustable.

Speed and strength are adjustable.

Subdivide 2 kinds of tapping modes, speed, width and intensity are adjustable.

Subdivide two kinds of acupressure modes, with adjustable speed, width and strength.

Description

02).Manual massage - back stretching

·In the manual function selection interface, click the “ ” icon to enter the massage stretch mode selection interface, and click the pair stretch mode icon to select the personalized massage function.

3).Air pressure massage

·Click the “ ” button icon to enter the air pressure massage function selection interface, and click the corresponding air pressure function icon to select the air pressure massage function. Pneumatic massage functions include foot power, arm pressure, full air pressure, hip pressure, and leg pressure.

01). Air pressure massage - arm

Intensity

One-Speed Two-Speed

Intensity: 3 levels of intensity can be adjusted

Three-Speed

Adjust the arm air pressure intensity with a total of 3 strokes when the arm air pressure is on.

Function

Description

Press this button to turn the arm pressure massage function on or off

02).Air pressure massage - full air pressure, buttock pressure, leg pressure

Intensity

One-Speed Two-Speed

Intensity: 3 levels of intensity can be adjusted

Three-Speed

Function

Full back

Upper back

Lower back

Local

Fixed point

No te :

In the state of lifting the massage technique on the shoulder, the extension mode selection is invalid.

Description

Full back up and down massage.

The upper part of the back is massaged up and down

The lower part of the back is massaged up and down.

A small amount of back and forth massage on the back.

A fixed position massage on the back.

Function

Full pressure

Hip

Leg

At full air pressure, hip pressure, and leg air pressure, the air pressure massage intensity can be adjusted for a total of three strengths.

Description

Press this button to turn the body pressure massage function on or off.

Press this button to turn the hip pressure massage function on or off.

Press this button to turn the leg pressure massage function on or off.

4342

Method of usage Method of usage

4). Other functional massage

01).Other functional massage - hyperthermia function

·Click the “ ” button icon to enter other massage function selection interface.

Click “ ” icon to turn on or off the back and leg hyperthermia function at the same time. The hyperthermia is the far infrared heating and heat treatment function.

Button

Description

Press this button to turn on or off the back and calf hyperthermia function, and heat it to far infrared heat therapy function.It is warm after 3 minutes of opening.

02).Other functions massage - aromatherapy function

·Click the “ ” button icon to enter other massage function selection interface,

click “ ” icon to turn the aroma function on or off.

03).Other functions massage - star top function

·Click the “ ” button icon to enter other massage function selection interface,

click the “ ” icon to turn the star top function on or off.

Press this button to turn the star top function on or off.

04).Other functional massage - sole roller

·Click the “ ” button icon to enter other massage function selection interface,

click “ ” icon to turn the foot roller massage function on or off. When the foot roller massage function is on, click the “foot roller speed” icon to adjust the foot roller massage speed for a total of 3 speeds.

Button

Description

Press this button to turn the aroma function on or off.

Button

Speed

One-Speed Two-Speed Three-Speed

Speed: 3 levels of intensity can be adjusted

Description

Press this button to turn the foot roller massage function on or off

4544

Method of usage Method of usage

05).Other functions massage - smart archive function

·Click the “ ” button icon to enter other massage function selection interface

and enter the custom interface; including custom storage I, custom storage II, custom storage III application or archive function.

·Storage: Store all current tactics, air pressure, angles, and other massage

functions.

·Call: Recall the previously stored techniques, air pressure, angle, and other

massage functions.

6).Settings - Language Settings:

·Click the “ ” button to enter the setting function interface, then click the “ ”

button to pop up the language list box and select the language type. The system contains 2 languages (Simplified Chinese, English).

Linking up button: Press and hold this button, the backrest frame will rise slowly, while the calf frame will slowly descend. When released, the backrest frame will be raised or the lower legrest will be lowered. After the joint kicking action is completed, the calf will automatically detect the length of the foot.

Linking lying button: Press and hold this button to slowly lower the backrest frame, while the calf frame slowly rises and the release stops.The backrest frame is lowered or the calf frame is raised; after the joint lying movement is completed, the calf will automatically detect the foot minister degree.

Zero gravity button: Each time the button is pressed, the position of the calf frame and the backrest frame is automatically adjusted to zero gravity position. Zero gravity lying mode, cycle switching

8).Wireless Bluetooth music playback operation

·With Bluetooth-enabled audio source devices (such as mobile phones, MID tablets,

etc.) paired with the Bluetooth module of the massage chair, the music played by the audio source device can be wirelessly transmitted to the massage chair audio system for music playback via Bluetooth wireless.

7.Seven, tablet system operation, turn off the power, end the massage

·When the massage function is on, click the massage button on the massage

information display interface to immediately turn off all massage functions.

·Cut off the power supply of the whole machine, the figure (schematic diagram of

the whole machine power cut).

7). Position adjustment of the backrest frame and the small leg

Button

Description

Calf up button: Press and hold this button to slowly raise the calf frame, release to stop rising; the calf frame rises when finished, the calf will automatically detect the length of the foot.

Lower leg lowering button: Press and hold this button to slowly lower the calf frame, release to stop falling; lower leg lowering action when finished, the calf will automatically detect the length of the foot.

CONTROLLER JACK

FUSE: T5AL 250V

POWER INPUT

CONTROLLER JACK

FUSE: T5AL 250V

POWER INPUT

Schematic diagram of the whole machine power turning off.

Schematic diagram of unplugging the whole machine wiring. Schematic diagram of unplugging the power plug.

Switch the massage chair power switch to the off state, and then

No te :

unplug the power cord from the power outlet.

4746

Method of usage Method of usage

8.Eight, handrail installation instructions

·Find the connecting plug corresponding to the armrest from the bottom of the

frame and pierce it from the middle of the armrest steel frame (Figure 1).

·After inserting the connecting plug from the middle of the armrest steel frame,

corresponding to each pair of wiring plugs (Figure 2).

Figure 1 Figure 2

·The connector from the bottom of the frame is connected to the armrest connector

firmly, and the air pipe connector is also inserted into place (Fig. 3).

·After the connector is connected, gently push the top of the frame into the bottom

of the frame with the hand fixed on the steel frame, taking care to avoid the pipe collapse (Figure 4).

Figure 3

·As shown in the figure, the three hooks on the handrail are to be hooked to the

steel pipe of the handrail steel frame (Fig. 5).

·Hold the front and rear ends of the armrests with both hands. Before the armrests

are low and high, first hook the front end of the armrests to the front end of the armrest steel frame. (Check if the connecting cable is inserted into the lower part of the armrest frame to avoid jamming.) Then hook the hooks under the armrests to the steel. The frame presses the rear end of the armrest down and presses the upper two hooks into the steel frame (Fig. 6).

Figure 4

Figure 5

·After the armrest is placed on the fixed steel frame, press the hands together from

the front and rear of the handrail so that the three hooks of the handrail are fixed on the steel frame, and gently shake the handrail to check whether it is hooked (Fig. 7).

·Locate the mounting hole on the front of the fixed steel frame as shown in the

figure. Screw the hexagon socket screw into the screw with the Allen button (Figure

8).

·Locate the mounting hole on the rear of the fixed steel frame as shown in the figure.

Screw the hexagon socket screw into the inner arm of the fixed hexagonal wrench and fix it. The installation steps are the same (Figure 9).

Armrest

Figure 7

Figure 6

Seat cushion

Calf

Figure 8

Armrest

Back cover

Figure 9

4948

Method of usage Method of usage

9.Nine, calf installation instructions

1. Cut the connecting wire and the air pipe tie fixed on the front sealing plate first.

2. Connect the connecting wire and the air pipe and the leg joint in the hole of the front sealing plate, and confirm whether the docking is in place, and then insert the docking cable and the air pipe inward from the front sealing plate hole, and insert it under the frame, and pay attention to Avoid obstruction of the trachea when inserted.

1 2

3.Insert the rotating inner sleeve and the rotating outer sleeve into the left side of the

calf and the right side of the lower leg (note: the large step must face inward).

4.Open the calf support hinge cover on the left and right mounts of the massage

chair.

5. Then hang the lower leg (left and right shaft) into the frame support hinge plate (Figure 5).

6. Cover the rotating shaft cover, press the calf to rotate the outer sleeve, and then use the 4# hex wrench provided to tighten 2 M5×14-12.9 black zinc environmental protection hexagon socket head cap screws and a 6×12× 1.5 Black zinc environmental protection flat pad locks the calf support rotating cover and the calf is installed (Fig. 6).

7.After the screw is locked, the rear slot of the calf cover is snapped into the pin

shaft, and then the front end of the lower leg cover is pressed down and the rotating shaft cover is pressed. completely parallel and parallel, then use the M4 screw to lock the calf rotating shaft cover and the calf is installed.

3 4

5150

Method of usage Method of usage

10.Ten, aromatherapy installation instructions 11.Head cushion and backrest pad's dismounting and use manual

·Rotate the capsule cover to the back of the massage chair. You can see the

aromatherapy device on the right side of the massage chair (Figure 1).

·Rotate the aromatherapy holder knob to the unlock position and remove the empty

aroma stick (Figure 2).

·Using head cushions can reduce the kneading massage intensity on neck andshoulder, according to your needs to decide whether the head cushions isneeded (recommend head cushions). Backrest cushion and backrest connected by zipper (1), head cushions and backrest pad connected by thread gluing (2).

Zipper Thread gluing

·After removing the empty aroma stick, attach the new aroma stick to the aroma

holder. Then align the arrow on the aroma holder with the unlocked position on the upper arm trim and load the aroma stick (see Figure 3).

·Rotate the aromatherapy holder to the position of the lock closure mark, you can

lock it, and the aroma stick is installed (Figure 4)

3 4

（1）

（2）

12.Floor protection

·Put the heavy massage chairs on the wood floor for a may damage the floor, so

please place a carpet or other object to avoid this damage.

Caution: Do not move the chairs with its wheels on wood floor, rough ground or in a narrow space. Two people are required to lift the chair. During the lifting period, take the calf rest end sealing plate and backrest cover grooves as the force-bearing point(Please do not lift armrest directly.)

Product specificationMethod of usage

13.Method of movement

·When moving, first make sure all the wires are pulled out of the massage chair. On the left and right sides of the massage chair, hold the lower edge of the armrest with both hands, and then lift the massage chair upwards with force. Lift the massage chair to the appropriate position and gently lower the massage chair. Pay attention to the position of the foot when putting down the massage chair to avoid being pressed against the foot by the massage chair

Note: Be sure to turn off the power switch and unplug the power cord and the hand controller cable while moving.

Model: OS- Escape 4D Name: Massage Chair Rated voltage: 110-120V~ 60Hz 220-240V~ 50Hz/60Hz Rated power input:260W Rated time: 20Min Safety structure: Class I

Material introduction: PVC, PA, steel parts and electric & electron parts

MATERIAL

LEATHER CLOTH WOOD

BuyDirectSign BYDS1030 Owner Manual

Specifications and Main Features

Frequently Asked Questions

User Manual