Page 1
What’s in the Box?
Get to Know Your Micro-Inspection Camera
Flexible 4ft
probe cable
2.4” color LCD screen
Let’s Get Started!
Step 1: Install Batteries
Lift the latch on the battery compartment door on the
back of your camera.
Remove the battery compartment door and install four
AA batteries (not included). Make sure the batteries
match the + and – markings on the inside of the
compartment.
Replace the battery door as shown here.
Everyday Use
To turn the display on/off: Press and hold the
button.
To adjust the brightness of the camera’s LED
lights: Press the
LED lighting to the level you want. After the
brightest setting, the lighting returns to off. Press
the button repeatedly again until you get to the
level you want.
button repeatedly to increase
(1) Micro-Inspection Camera
(3) Accessory Attachments
(1) Magnet
(1) Mirror
(1) Hook
5.2mm waterproof
camera with built-
in adjustable LED
lighting
Zoom / 180º image
rotation button
Power button
Camera lighting button
Accessory storage
compartment (bottom)
ACC.
Step 2: Store the Accessory Attachments
Open the accessory storage compartment door on
the bottom of the camera’s handle.
Camera
handle,
bottom
Remove the door and place the accessory
attachments inside the compartment for storage.
ACC.
Step 3: Remove the LCD Screen’s Protective Film
Carefully remove the protective lm covering the LCD screen.
To zoom the image: Press the
1 press = 1.5 times image zoom
2 presses = 2 times image zoom
3 presses = returns to no zoom
To rotate the image: Press and hold the
button.
button.
Page 2
Using the Accessory Attachments
12-Month Limited Warranty
Important Information
Camera
handle,
bottom
Attachment,
bottom view
Attachment
on cable,
top view
Attachment
on cable,
side view
ACC.
Latch
Choose the accessory attachment you want to use
from the storage compartment on the bottom of the
handle.
Note: Make sure you close the compartment when you’ve got the one
you want!)
Look at the base of the accessory attachment you
chose—make sure the latch on the side is open as
shown here. If it isn’t, pry it open with your thumbnail.
Slide the attachment over the end of the cable just
past the wider section at the end, as shown here.
Note: If the attachment doesn’t t over the end of the cable,
check to make sure the latch on the base of the attachment
is open as explained above.
Once you’ve positioned the attachment so that it’s
next to the wider section (but not on it), squeeze the
sides of the attachment’s base to close the latch and
secure the attachment to the cable.
Voxx Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product
that should this product or any part thereof, under normal use and conditions, be proven defective in
material or workmanship within 12 months from the date of original purchase, such defect(s) will be
repaired or replaced with new or reconditioned product (at the Company’s option) without charge for
parts and repair labor. To obtain repair or replacement within the terms of the warranty, the product
is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specication of defect(s),
transportation prepaid, to an approved warranty station. For the location of the nearest warranty
station to you, call toll-free to our control ofce: 1-800-645-4994.
This Warranty is not transferable and does not cover product purchased, serviced or used outside the
United States or Canada. The warranty does not extend to the elimination of externally generated
static, noise, or loss of range or audio/video quality due to external factors, to costs incurred for the
installation, removal or reinstallation of the product, or to damage to digital media devices or memory.
The warranty does not apply to any product or part thereof which, in the opinion of the company, has
suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect,
accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter
not provided with the product or by removal or defacement of factory serial number/barcode labels.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF
ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN
A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person
or representative is authorized to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damage so the above limitations or exclusions may not
apply to you. This Warranty gives you specic legal rights and you may also have other rights which
vary from state/province to state/province.
FCC Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 1 5 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in
accordance with Local and National Regulations.
micro-inspection camera
with 2.4” color LCD screen
quick start guide
To remove the attachment from the cable: Pry the
latch on the base of the attachment open with your
thumbnail.
ICAM24 QSG 03
Loading...