Bussmann SPP40SP1120SN, SPP40SP2240PN, SPP40SP3240DLG, SPP40SP3480DLG, SPP40SP3208WYG Data Sheet

S

2-1/16” 2-1/16”

1-11/16”

1-11/16”

4-1/8”

3-3/16”

4-1/16”

3-3/8”

7/8”

1-1/16” Dia.

URGEPROTECTIONMADESIMPLE™ FORLIGHTCOMMERCIAL

URGE

S

POD™ PRO SPD

FOR

UL 1449 3rdEdition Listed Loadside and Lineside Protection

Description

The Cooper Bussmann SurgePOD™ PRO is a Type 1 UL
Listed 1449 3rdEdition surge protective device suitable for
installation on both the loadside or lineside of the service
entrance overcurrent protective device.

Available in popular voltage and system specific versions to
match common residential and light commercial electrical
system and equipment requirements. The SurgePOD PRO
delivers superior surge protection using MOV thermal
disconnect technology that eliminates the need for additional
overcurrent protection.

Parallel connection to the electrical system permits the
SurgePOD PRO SPD to be installed on any ampacity panel.

rd

• Type 1 UL 1449 3
and installed on the loadside or lineside of the service
entrance overcurrent protective device

• Voltage specific models precisely match and protect
electrical systems and equipment better than
“one-size-fits-all” SPDs

• Thermal disconnect technology eliminates the need for
additional fusing

• Compact UV resistant NEMA 4X enclosure for indoor or
outdoor applications

• easyID™ LED status indicator provides surge protection
status at a glance

Edition Listed SPDs are easily selected

SPP40SP1120SN
SPP40SP2240PN

& R

ESIDENTIALAPPLICATIONS

Status Indicator

SPP40SP3240DLG
SPP40SP3480DLG

NEMA 4X Rated Pro

Type 1 UL Listed SPD

easyID™ LED

SPP40SP3208WYG
SPP40SP3480WYG

Dimensions - in

0213 BU-SB13071 Page 1 of 3 Data Sheet 10033

Type 1 SPD Part Number System

SPP = Product Series

Surge Protection PRO

Surge Rating

40S = 40kA max discharge current

No of Wires/Poles

P1 = 1 P2 = 2 P3 = 3 P4 = 4

Rated System Voltage

120, 208, 240, 480Vac

System

SN = Single-Phase 2 Wire, 2 Connection Points
PN = Split-Phase, 3 Wire, 3 Connection Points
DLG = Three-Phase Delta 3 Wire + G, 4 Connection Points
WYG = Three-Phase Wye 3 Wire, 4 Connection Points

SPP 40S PX XXX XXX

SurgePOD™ PRO Technical Information

Nominal Max. Continuous

System Operating AC Connection

Catalog Number Voltage Voltage (MCOV) (VC) System Type Points

SPP40SP1120SN 120V 150V Single-Phase 2 Wire 2
SPP40SP2240PN 120/240V 150V Split Phase 3 Wire 3
SPP40SP3240DLG 240V 320V Three-Phase Delta 3 Wire + G 4
SPP40SP3480DLG 480V 550V Three-Phase Delta 3 Wire + G 4
SPP40SP3208WYG 208V 150V Three-Phase Wye 3 Wire + G 4
SPP40SP3480WYG 480V 320V Three-Phase Wye 3 Wire + G 4

Specifications (for all SurgePOD PRO units) Values

Short Circuit Current Rating (SCCR) 200kA
Nominal Discharge Current (8x20µs) I
Max. Discharge Current (8x20µs) I
Response Time (ns) t

A

max

n

10kA
40kA

<25ns
Frequency 50/60Hz
Operating State/Fault Indication Bi-Color LED - Green (good) / Red (replace)
Conductor Length / Guage 18 inches, 10 AWG Stranded Tinned Copper
Mounting Chase Nipple / Bracket*
Enclosure / Flammability Ratings NEMA 4X - UL 94-5VA
Degree of Protection (Installed State) IP20 (finger-safe)
SPD Install Location Indoor/Outdoor
Circuit Location Lineside or Loadside of service entrance overcurrent protective device
Standard UL 1449 3rdEdition Type 1 Listed SPD
Agency Information cULus, RoHS Compliant
Product Warranty 2 Years**
Operating Temperature -40˚C to +65˚C
Maximum Operating Altitude 12000FT

* Customer-supplied bracket.

** See Cooper Bussmann SPD Limited Warranty Statement (3A1502)

Voltage Protection Ratings (VPRs)

Nominal System MCOV Voltage Protection Ratings (VPRs)

Catalog Number Voltage (VC) L-N L-L L-G

SPP40SP1120SN 120V 150V 700 ——
SPP40SP2240PN 120V/240V 150V 700 1200 —
SPP40SP3240DLG 240V 320V — 2500 1200
SPP40SP3480DLG 480V 550V — 3000 1800
SPP40SP3208WYG 208V 150V — 1200 700
SPP40SP3480WYG 480V 320V — 2500 1200

0213 BU-SB13071 Page 2 of 3 Data Sheet 10033