
Limitron
®
KTS-R
Fast-Acting Fuses 1-600A
600 Volt
Form No.KTS-R
Page 1 of 2
Data Sheet: 1044
Bussmann
®
10-2-02
SB02295
450A to 600A
13.38"
(± 0.094)
1/10A to 30A
.81" (± 0.008)
5"
(± 0.31)
1.000" (± 0.008)
1.500" (± 0.008)
2.000" (± 0.008)
2.500" (± 0.008)
110A to 200A
9.63"
(± 0.062)
225A to 400A
11.63"
(±0.094)
70A to 100A
7.88"
(±0.062)
35A to 60A
1.06" (± 0.008)
5.5"
(± 0.31)
General Information:
• Single-element, fast-acting fuses with minimal time-delay.
• Provides a high degree of short-circuit current-limitation
(component protection).
• Particularly suited for circuits and loads with no heavy surge
currents of motors, transformers, solenoids, and welders.
• LIMITRON fuses are commonly used to protect circuit
breakers with lower interrupting ratings.
• If used in circuits with surge currents (motors, etc.) must be
sized to prevent unwanted opening and thus only provide
short-circuit protection.
• Incorporate Class R rejection feature. Can be inserted in nonrejection type fuseholders. Thus, can physically and electrically replace fast-acting Class H, K1, K5, RK5, and other
fast-acting fuses.
Dimensional Data
Catalog Symbol: KTS-R
Fast-Acting
Current-Limiting
Ampere Rating: 1 to 600A
Voltage Rating: 600Vac (or less)*
Interrupting Rating: 200,000A RMS Sym.
Tube Material: Glass Melamine
End Caps: 70/30 Brass
Operating Temp.: –40°C to +85°C
Storage Temp.: –55°C to +85°C
Agency Information:
UL Listed, Std. 248-12, Class RK1, Guide JDDZ, File E54273
CSA Certified, C22.2 No. 248.12, Class 1422-02, File 53787
*0-600A is rated 300Vdc and 10 KAIR.
Catalog Numbers
KTS-R-1 KTS-R-30 KTS-R-125
KTS-R-2 KTS-R-35 KTS-R-150
KTS-R-3 KTS-R-40 KTS-R-175
KTS-R-4 KTS-R-45 KTS-R-200
KTS-R-5 KTS-R-50 KTS-R-225
KTS-R-6 KTS-R-60 KTS-R-250
KTS-R-8 KTS-R-70 KTS-R-300
KTS-R-10 KTS-R-75 KTS-R-350
KTS-R-12 KTS-R-80 KTS-R-400
KTS-R-15 KTS-R-90 KTS-R-450
KTS-R-20 KTS-R-100 KTS-R-500
KTS-R-25 KTS-R-110 KTS-R-600
Carton Quantity and Weight (600Vac)*
Carton
Weight**
Amps Qty. Lbs. Kg.
1–30 10 1.45 0.657
40–60 10 2.63 1.262
70–100 1 0.5 0.226
110–200 1 1.4 0.634
225–400 1 2.75 1.246
450–600 1 4.25 1.925
*
Contact Bussmann for dc ratings.
**
Weight per carton.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.

Limitron
®
KTS-R
Fast-Acting Fuses 1-600A
600 Volt
Form No. KTS-R
Page 2 of 2
Data Sheet: 1044
Bussmann
®
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained
in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Current-Limitation Curves Time-Current Characteristic Curves–Average Melt
10-2-02
SB02295
Recommended fuseblocks for
Class R 600V fuses
See Data Sheet: 1111
400,000
100,000
10,000
B
30A
60A
300
100
AMPERE
RATING
600
400
200
100
60
30
A
10
100A
200A
400A
600A
AMPERE
RATING
1,000
INSTANTANEOUS PEAK LET-THROUGH CURRENT IN AMPS
1,000
A–B=ASYMMETRICAL AVAILABLE PEAK (2.3 x SYMM RMS AMPS)
RMS SYMMETRICAL CURRENTS IN AMPERES
10,000
100,000
200,000
1
TIME IN SECONDS
.1
.01
40
100
RMS SYMMETRICAL CURRENT IN AMPERES
1,000
10,000