Bussmann HR Series, HM Series Data Sheet

Catalog
Symbol Amps Volts AC Includes Fuse Wire

HRJ* SFE-20

__________ ____________________
HRI SFE-14

__________ ____________________
HRH SFE-9

19∑ of #14

__________ ____________________
HRE SFE-7⁄Ω™

__________ ____________________
HRG SFE-6

__________ ____________________
HRF

20 32

SFE-4

__________ _______________________________________
HMJ** SFE-20

__________ ____________________
HMI SFE-14

__________ ____________________
HMH SFE-9

8∑ of #14

__________ ____________________
HME SFE-7⁄Ω™

__________ ____________________
HMG SFE-6

__________ ____________________
HMF SFE-4

*Also available as in-line fuseholder only with lead wire contacts,

HRJ-Less-Fuse.

**Also available as in-line fuseholder only with lead wire contacts,

HMJ-Less-Fuse.
HDJ-A – For ⁄Ω¢∑ ≈ 1⁄Ω¢∑ fuse, no wire or fuse included, accepts #18 - #20 wire.
HDJ-B – For ⁄Ω¢∑ ≈ 1⁄Ω¢∑ fuse, no wire or fuse included, accepts #12 - #16 wire.
HDI-A – For ⁄Ω¢∑ ≈ ‡Ω•∑ fuse, no wire or fuse included, accepts #18 - #20 wire.
HDI-B – For ⁄Ω¢∑ ≈ ‡Ω•∑ fuse, no wire or fuse included, accepts #12 - #16 wire.
HAF-A – For ⁄Ω¢∑ ≈ fiΩ•∑ fuse, no wire or fuse included, accepts #18 - #20 wire.

Catalog Symbols: HRJ, HRI, HRH, HRE, HRG, HRF, HMJ,

HMI, HMH, HME, HMG, HMF

In-Line Fuseholders
Ampere Rating: 20 Amperes
Voltage Rating: 32 Volts AC
Temperature Rating (RTI): 140°C
Agency Approvals:

No agency listing.

In-Line Fuseholder HR and HM

For Type SFE and ⁄Ω¢∑ ≈ Various Length Fuses Series

Form No. HR and HM Series

Page 1 of 1

BIF Doc #2122

Bussmann

®

12-21-98

SB98107

Rev. A

The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin
is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con­tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Dimensional Data: All dimensions (±0.015)

General Information:

• Bayonet type knob.

• Maximum current rating 20 amps; voltage rating 32 volts AC.

• Holders available as complete assembly consisting of in-line
holder with 8∑ or 14∑ of #14 insulated wire and installed
fuses.

• Replacement springs – BK/1A1853.

• Replacement contacts – 9838 for #18 - #22 wire.

9841 for #12 - #16 wire.

2.19"2.19"

(55.6mm)

0.75"

(19.1mm)

0.69"

(17.5mm)

1.56"

(39.7mm)

0.38"

(9.5mm)