Bussmann HHC, HHD, HHF, HHG Data Sheet

Automotive In-Line Fuseholder HHC, HHD,

For ATC®Blade-Type Fuses

HHF, & HHG

Form No.HHC, HHD ,HHF and HHG

Page 1 of 1

Data Sheet: 2107

Bussmann

®

1-22-03

SB03020

CATALOG SYMBOL: HHC, HHD, HHF, AND HHG
IN-LINE FUSEHOLDERS
RATED 32Vdc MAXIMUM
CURRENT RATING: See Table

The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this Data Sheet are by definition uncontrolled. This bulletin is intended to clearly
present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products
and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it
should be tested by the user in all possible applications.

Dimensional Data

Electrical Ratings

Catalog Fuse Electrical Maximum Continuous
Symbol Description Size Connection Current Rating

HHC Yellow fuseholder 3-20A #16 black leadwire 16A*
HHD Black fuseholder 3-30A #12 yellow leadwire 24A*

HHD-C Cover only

Fits HHD

Clear polycarbonate

only

HHF Black fuseholder 3-20A #16 yellow leadwire 16A*

with cover

HHG Black fuseholder 3-30A #12 yellow leadwire 24A*

with cover

* Or 80% of fuse rating, whichever is less.

• For ATC

®

blade-type fuses.

• “Write-in” space for circuit identification on HHC holders (bright yellow).

CATALOG SYMBOL:
HHD-C

COVER FOR HHD FUSEHOLDER

Bulk Products
(Bulk Quantity - 1000 pieces)

Catalog Fuse Electrical Maximum Continuous
Symbol Description Size Connection Current Rating

BK/HHC-R Yellow fuseholder 3-20A #16 red leadwire 16A*
BK/HHF-B Black fuseholder 3-20A #16 black leadwire 16A*

with cover

A fuse must be properly and fully inser ted into the holder to
provide a solid connection. Poor or improper inser tion of the
fuse can result in failure of the fuse and holder, thus not
protecting the device for which it was intended.

* Or 80% of fuse rating, whichever is less.

0.38"

0.25"

4.0" + 0.25" 4.0" + 0.25"

0.78"

0.364"

0.91"

0.5"

0.30"

1.125"