Bussmann GLD, GBA Data Sheet

Catalog Symbol: GLD/GBA
Non-Time-Delay; Indicating
Ampere Rating: ⁄Ω™ to 15 Amperes
Agency Approvals:

U.L. Listed, Std. 248-14

⁄Ω™-5A/125 Vac, 10,000 AIC
Guide JDYX, File E19180

U.L. Recognized, 6A/125Vac, 1000 AIC

10-15A/50V ac/dc, 300 AIC
Guide JDYX2, File E19180

CSA Certified, ⁄Ω™-5A/125 Vac, 10,000 AIC

Class 1422-01, File 53787

Electrical Ratings (Catalog Symbol and Amperes)

GLD-⁄Ω™ GLD-2 GLD-6

GLD-‹Ω¢ GLD-3 GLD-10

GLD-1 GLD-4 GLD-12

GLD-1-⁄Ω™ GLD-5 GLD-15

Carton Quantity and Weight

Ampere Carton Weight
Ratings Qty. Lbs. Kg.

⁄Ω™-15 100 0.86 0.390

Pin-Indicating Type GLD/GBA

Non-Time-Delay

⁄Ω¢∑ ≈ 1⁄Ω¢∑ (6.3mm ≈ 32mm)

Form No. GLD

Page 1 of 1

BIF Doc #2012

Bussmann

®

12-18-98
SB98107

Rev. A

1.44"

(36.5mm)

(blown)

(Approximate)

0.25"

( ±0.003)

1.27"

(±0.031)

(32.2mm)

(not blown)

The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin
is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con­tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Dimensional Data

Time-Current Characteristic Curves–Average Melt

General Information:

• Use in power electronic circuits in which a fuse opening must
be quickly apparent.

• Opening of fuse results in the ejection of end pin.

• Type GLD has an albaloy-plated pin for positive, electrical
signal circuit activation.

• Type GBA has a red pin for high visibility.

• The Buss Series 8000 fuseblocks are recommended for
visual indication.

• For visual indication use Buss panel-mounted fuseholder HLD
(15A maximum); for lamp indicating, HKA (15A maximum).

• Body material: Fibre tube.

• Ferrule plating: Nickel plated endcaps.

• Ferrule material: Brass

CE logo denotes compliance with European Union Low Voltage Directive
(50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.

AMPERE

100

10

1

TIME IN SECONDS

.1

.01

0.75

1

.4

213

5810

CURRENT IN AMPERES

15

10

RATING

100

200