Bussmann Fuse Bases Data Sheet

Bussmann
®
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Form No.
BIF Doc #720033
Fuse Bases (Blocks)
Modular Style
Bussmann offers a comprehensive line of fuse bases that provide the user with design and manufacturing flexibility. Two identical half bases make up a Buss modular fuse base. These “split” units can be panel mounted any distance apart to accommodate any length fuse.
Stud Type
The simpler design is the C5268 series modular fuse base. With this design, the fuse terminal and cable (with termination) are mounted on the same stud, minimizing labor needed for installation. The stud type base is available in the configuration shown in the table below.
Max. Fuse Stud Stud Dia.
Part No. Current Rating Heights & Threads
C5268-1 200A 1.00∑ fiΩ¡§-18 C5268-2 200A 1.75∑ fiΩ¡§-18 C5268-3 200A 0.75∑ fiΩ¡§-18 C5268-4 100A 1.00∑ ⁄Ω¢-20 C5268-5 100A 1.75∑ ⁄Ω¢-20
Connector Type
Bussmann also offers a modular style fuse base that utilizes a tin-plated connector (for wire termination and heat dissipation) and a plated-steel stud (for fuse mounting). The connector type fuse base is available in the configurations shown below. Consult Bussmann for additional product details.
Modular Max. Max. Fuse BIF
Base Style Voltage Current Rating Document
1BS101 600V 100A 1206 1BS102 600V 400A 1207 1BS103 600V 400A 1208 1BS104 600V 600A 1209 BH-0xxx 700V 100A 1200 BH-1xxx 2500V 400A 1201 BH-2xxx 5000V 400A 1202 BH-3xxx 1250V 700A 1203
Fixed Center Base Style
Bussmann offers a comprehensive line of fixed mount style fuse bases under the trademark TRON®rectifier fuseblocks. The cable and fuse connections are similar to the stud type fuse base — both are mounted on the same stud. Consult Bussmann for complete product details.
Stud Type
Connector Type
Fixed Center
7-11-01
SB01191