Error Messages Explained
â– BusinessObjects XI 4.0
2010-11-05
Copyright
© 2010 SAP AG. All rights reserved.SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP
Business ByDesign, and other SAP products and services mentioned herein as well as their respective
logos are trademarks or registered trademarks of SAP AG in Germany and other countries. Business
Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions, Web
Intelligence, Xcelsius, and other Business Objects products and services mentioned herein as well
as their respective logos are trademarks or registered trademarks of Business Objects S.A. in the
United States and in other countries. Business Objects is an SAP company.All other product and
service names mentioned are the trademarks of their respective companies. Data contained in this
document serves informational purposes only. National product specifications may vary.These materials
are subject to change without notice. These materials are provided by SAP AG and its affiliated
companies ("SAP Group") for informational purposes only, without representation or warranty of any
kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The
only warranties for SAP Group products and services are those that are set forth in the express
warranty statements accompanying such products and services, if any. Nothing herein should be
construed as constituting an additional warranty.
2010-11-05
Contents
Administration & Security Error Messages...........................................................................45Chapter 1
1.1
1.2
1.3
1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
1.3.6
1.3.7
1.3.8
1.3.9
1.3.10
1.4
1.4.1
1.4.2
1.4.3
1.5
1.5.1
Administration (ADM) Errors..................................................................................................45
Administration Wizard (ADW) Error Messages.......................................................................45
BIP Framework Middleware (FWM) Error Messages..............................................................46
FWM 00001 - FWM 00009....................................................................................................46
FWM 01001 - FWM 01014....................................................................................................49
FWM 02001 - FWM 02124....................................................................................................52
FWM 04002 - FWM 04038....................................................................................................63
FWM 08001 - FWM 08006....................................................................................................68
FWM 10001 - FWM 10007....................................................................................................70
FWM 12001 - FWM 12013....................................................................................................71
FWM 14001 - FWM 14009....................................................................................................73
FWM 16001 - FWM 16005....................................................................................................75
FWM 17001 - FWM 17003....................................................................................................76
BI Platform Servers (FWB) Error Messages...........................................................................77
FWB 00001 - FWB 00999......................................................................................................77
FWB 01000 - FWB 01999......................................................................................................97
FWB 02000 - FWB 02999......................................................................................................98
Security (USR) Errors............................................................................................................99
You are not authorized to use Designer. (USR0006) .............................................................99
2.1
2.2
2.3
2.4
2.5
3.1
3.1.1
3.1.2
BI Workspaces Error Messages..........................................................................................101Chapter 2
BIW Error Messages............................................................................................................101
Could not communicate with Web Intelligence (BIW 00004)................................................101
Problem occurred while attempting to publish the document '%1' (%2) (BIW 00005)...........101
Error: Cannot parse module XML (BIW 02001)....................................................................102
Error: Invalid module token (BIW 02001). (BIW 02002)........................................................102
BIP Servers (FWR) Error Messages....................................................................................103Chapter 3
FWR 000001-000007..........................................................................................................103
_a_An internal error occurred. Please contact your system administrator. (FWR 000001)_z_.103
_a_The property {0} is missing a value. (FWR 000002)_z_....................................................103
2010-11-053
Contents
3.1.3
3.1.4
3.1.5
3.1.6
3.1.7
3.2
3.2.1
3.2.2
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
4.17
4.18
4.19
4.20
4.21
4.22
4.23
4.24
4.25
4.26
4.27
_a_The property {0} has an invalid value of {1}. (FWR 000003)_z_........................................104
_a_The argument {0} has an invalid value of {1}. (FWR 000004)_z_......................................104
_a_An error occurred while deserializing an object. (FWR 000005)_z_.................................104
_a_An error occurred while serializing property {0}. (FWR 000006)_z_.................................104
_a_The value for {0} must be in the range from {1} to {2}. (FWR 000007)_z_........................104
FWR 100001-100002..........................................................................................................105
Internal error. Please contact your system administrator. (FWR 100001).............................105
Out of memory error. Please contact your system administrator. (FWR 100002).................105
Check Integrity Messages (CIM)........................................................................................107Chapter 4
Table {0} is missing a primary key. (CIM 01100)...................................................................107
Table {0} is not linked to any other table. (CIM 01101).........................................................107
The Table {0} referenced in the Data Foundation {1} does not exist in the connection. (CIM
01102).................................................................................................................................108
A new column {0} has been detected in table {1} from the connection. (CIM 01103)............108
The column {0} in the table {1} does not exist in the connection. (CIM 01104)......................108
The column {0} in table {1} has an undetermined data type. (CIM 01105).............................108
The column {0} referenced in the table {1} does not have the same data type as in the connection.
(CIM 01106)........................................................................................................................109
The calculated column {0} referenced in the table {1} contains invalid SQL. (CIM 01107).....109
The connection for the checked table {0} in the data foundation {1} is not valid. (CIM 01108).109
The connection for the derived table {0} in the data foundation {1} is not valid. (CIM 01109).109
The derived table {0} in the data foundation {1} has an empty expression. (CIM 01110).......110
The derived table {0} in the data foundation {1} has an invalid SQL expression. (CIM 01111).110
The connection for the alias table {0} in the data foundation {1} is not valid. (CIM 01112).....110
The alias table {0} in the data foundation {1} does not reference any table. (CIM 01113)......110
The table {0} referenced by the alias table {1} does not exist in the data foundation {2}. (CIM
01114).................................................................................................................................111
The connection for the calculated column {0} in the table {1} is not valid. (CIM 01115).........111
The expression for the calculated column {0} in the table {1} is empty. (CIM 01116)............111
The expression for the calculated column {0} in the table {1} is invalid. (CIM 01117)............111
The connection {0} is invalid: {1}. (CIM 01200).....................................................................112
The Join {0} of the data foundation {1} has no valid link on tables. (CIM 01300)...................112
The table {0} involved in the join was not found in the data foundation {1}. (CIM 01301).......112
The column {0} involved in the join was not found in the data foundation {1}. (CIM 01302)....112
The connection for the checked join {0} in the dataFoundation {1} is not valid. (CIM 01303)..113
The cardinality of the join {0} of the data foundation {1} is undetermined. (CIM 01304).........113
The Join {0} in the data foundation {1} has a different cardinality to the detected cardinality. (CIM
01305).................................................................................................................................113
The expression for the checked join {0} in the data foundation {1} is empty. (CIM 01306).....113
The expression of the checked join {0} in the data foundation {1} is not correctly parsed. (CIM
01307).................................................................................................................................114
2010-11-054
Contents
4.28
4.29
4.30
4.31
4.32
4.33
4.34
4.35
4.36
4.37
4.38
4.39
4.40
4.41
4.42
4.43
4.44
4.45
4.46
4.47
4.48
4.49
4.50
4.51
4.52
4.53
4.54
4.55
4.56
4.57
4.58
4.59
4.60
4.61
The business object '{0}' is not owned by a universe. (CIM 01400)......................................114
The binding of the business object '{0}' is not valid. (CIM 01401).........................................114
It was impossible to execute the business object '{0}'. Check the object properties. (CIM
01403).................................................................................................................................114
The business object '{0}' is invalid. (CIM 01405)...................................................................114
The solve order value must be a number (CIM 01406).........................................................115
The name of this measure is already used in the business layer. (CIM 01407).....................115
The MDX expression does not reference the dimension [MEASURES]. (CIM 01409)..........115
A hierarchy must be specified. (CIM 01410)........................................................................115
This name is already used by a calculated member within the same hierarchy. (CIM 01411).116
The MDX expression does not reference the hierarchy assigned to the calculated member. (CIM
01412).................................................................................................................................116
A hierarchy must be specified (CIM 01413).........................................................................116
The name is already used by another named set (CIM 01414).............................................116
The MDX expression contains the "crossjoin" operator. The named set may show unexpected
behavior at query time. (CIM 01415)....................................................................................117
The MDX expression does not reference the hierarchy assigned to the named set. (CIM
01416).................................................................................................................................117
The @Prompt expression is incorrect. (CIM 01417).............................................................117
The @Variable expression is incorrect. (CIM 01418)............................................................117
The @Select expression is incorrect. (CIM 01419)...............................................................118
The name is already used by a measure predefined on the OLAP server (Search the string
[Measures].[{0}] in the OLAP catalog). (CIM 01420)............................................................118
The name is already used by a named set predefined on the OLAP server (CIM 01421)......118
The checked context "{0}" in data foundation "{1}" contains loops. (CIM 01501)...................118
The checked context "{0}" in data foundation "{1}" contains an excluded join that generates a
cartesian product. (CIM 01502)...........................................................................................119
"{0}" must have at least one column in the data table (CIM 01601).......................................119
"{0}" : Filter Before Use option must be set to False. (CIM 01602).......................................119
"{0}" : Automatic Refresh option must be set to True. (CIM 01603)......................................119
"{0}" : Allow users to search values on the database option must be set to False. (CIM
01604).................................................................................................................................119
"{0}" : Query Time Out option must be disabled. (CIM 01605)..............................................120
"{0}" : Max Rows option must be disabled. (CIM 01606)......................................................120
Check that the SQL script is not empty. (CIM 01607)..........................................................120
Check that the LOV connection is available. (CIM 01608)...................................................120
Check that the LOV data structure is available. (CIM 01609)...............................................121
"{0}" : Allow users to search values on the database option must be set to False (CIM 01610).121
Prompt must have a name. (CIM 01611)..............................................................................121
Prompt {0} has a data-type which is not well set (i.e. String, Number, or Date). (CIM 01612).121
Prompt "{0}" must have a Question (CIM 01613)..................................................................121
2010-11-055
Contents
4.62
4.63
4.64
4.65
4.66
4.67
4.68
4.69
4.70
4.71
4.72
4.73
5.1
5.1.1
5.1.2
5.1.3
5.1.4
5.1.5
5.2
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
5.2.10
5.2.11
5.2.12
5.2.13
5.2.14
5.2.15
5.2.16
If Use Key Values From List is selected, the Select Only From List option must also be selected
(CIM 01614)........................................................................................................................122
The Default values are empty. (CIM 01615).........................................................................122
The list of values is empty. (CIM 01616)..............................................................................122
"{0}" has an empty query definition. (CIM 01700).................................................................122
"{0}" query definition cannot be parsed. (CIM 01701)...........................................................123
Query "{0}" has no Query. (CIM 01702)...............................................................................123
Query "{0}" references a missing object ({1}) from the universe. (CIM 01703)......................123
Query "{0}" has no result objects. (CIM 01704)....................................................................123
Query "{0}" has combined queries with an inconsistent result object count. (CIM 01705).....123
"{0}" could not be found (CIM 01800)...................................................................................124
"{0}" has broken dependencies (CIM 01801)........................................................................124
Undocumented issue (CIM 02000)......................................................................................124
Crystal Reports Server (CRS) error messages....................................................................125Chapter 5
CRS 200001 - CRS 200005................................................................................................125
Internal error. Please contact your system administrator. (CRS 200001).............................125
Out of memory error. Please contact your system administrator. (CRS 200002).................125
Request failed because the user does not have the right to do the following: {0}. (CRS
200003)...............................................................................................................................126
Unsupported run-time modification detected. Can not add user specific content at run-time. (CRS
200004)...............................................................................................................................126
Drill down not possible. (CRS 200004) (CRS 200005)........................................................126
CRS 300001 - CRS 300024................................................................................................126
Internal error. Please contact your system administrator. (CRS 300001).............................126
{0} (CRS 300002)................................................................................................................127
{0} (CRS 300003)................................................................................................................127
Error writing exported report to disk. (CRS 300004)............................................................127
Error communicating with BOE: {0} (CRS 300005)...............................................................127
Scope batch job processing failed. (CRS 300006)...............................................................127
Global delivery rule alert processing failed. (CRS 300007)...................................................128
Unable to deliver document to destination. (CRS 300008)...................................................128
Unable to find personalization target field: {0} in report. (CRS 300009)................................128
Cannot map BOE profile value to non-string parameter field: {0} (CRS 300010)...................128
Cannot map a profile expression to a parameter field: {0} (CRS 300011).............................129
Parameter field(s): {0} are not optional. Cannot set no value. (CRS 300012)........................129
Parameter field(s): {0} do not allow multiple values. (CRS 300013)......................................129
Parameter field(s): {0} are in use and require a value. (CRS 300014)...................................129
Parameter field(s): {0} do not allow null values. (CRS 300015).............................................129
The publication source document does not have saved data, but saved data is required. (CRS
300016)...............................................................................................................................130
2010-11-056
Contents
5.2.17
5.2.18
5.2.19
5.2.20
5.2.21
5.2.22
5.2.23
5.2.24
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
7.10
7.11
7.12
Unable to convert profile value type to report field type for field: {0} (CRS 300017).............130
Personalizing data parameter(s): {0} can result in poor performance by potentially causing 1
database refresh per recipient. (CRS 300018).....................................................................130
Cannot personalize boolean group parameter(s): {0}. Personalizing a parameter in a boolean
group is not supported. (CRS 300019)................................................................................130
User does not have right to print document. (CRS 300020).................................................131
User does not have right to download document and only has rights to schedule to the default
enterprise location and inbox destinations. (CRS 300021)...................................................131
Failed to schedule a multilingual report. (CRS 300022)........................................................131
Failed to trigger alert within the report. (CRS 300023).........................................................131
Could not run publication because the document is based on a semantic layer with user-specific
security, and publication is not using per-recipient bursting mode. (CRS 300024)................132
Crystal Reports Error Messages.........................................................................................133Chapter 6
Check Security Mapping (CSM) error messages...............................................................135Chapter 7
The checked data security profile "{0}" contains an invalid data foundation. Please check if the
data foundation exists or contains at least one table. (CSM 00001).....................................135
A row restriction of the checked data security profile "{0}" contains a restricted table not defined
in the data foundation. Please redesign the checked row restriction. (CSM 00002).............135
A row restriction of the checked data security profile "{0}" contains an undefined restricted table.
Please define a new restricted table. (CSM 00003).............................................................136
The table mapping of the checked data security profile "{0}" contains an original table not defined
in the data foundation. Please redesign the checked table mapping. (CSM 00004)..............136
The table mapping of the checked data security profile "{0}" contains an undefined replacement
table. Please redefine a new map between the original table "{1}" and a new valid replacement
table. (CSM 00005).............................................................................................................136
The table mapping of the checked data security profile "{0}" contains a replacement table "{1}"
which is an alias. Aliases are not supported in the table mapping design. (CSM 00006).......136
The table mapping of the checked data security profile "{0}" contains a replacement table "{1}"
which is a derived table. Derived tables are not supported in the table mapping design. (CSM
00007).................................................................................................................................137
The connection mapping of the checked data security profile "{0}" contains an original connection
not defined in the data source of the data foundation. Please redesign the checked connection
mapping. (CSM 00008)........................................................................................................137
The connection mapping of the checked data security profile "{0}" contains an undefined original
connection. Please define a new original connection. (CSM 00009).....................................137
The connection mapping of the checked data security profile "{0}" contains an undefined
replacement connection. Please redefine a new map between the original connection "{1}" and
a new valid replacement connection. (CSM 00010).............................................................137
The SQL Where clause of the data security profile "{0}" is incomplete. Please enter a valid SQL
statement. (CSM 00011).....................................................................................................138
The SQL Where clause of the data security profile "{0}" is not valid. Please enter a valid SQL
statement. (CSM 00012).....................................................................................................138
2010-11-057
Contents
7.13
7.14
7.15
7.16
7.17
7.18
7.19
7.20
7.21
7.22
7.23
7.24
7.25
The Business Security Profile "{0}" contains an invalid universe reference. (CSM 00101).....138
The Business Security Profile "{0}" contains an invalid denied business item "{1}" in the metadata
control. Please redesign a new metadata control. (CSM 00102)..........................................139
The Business Security Profile "{0}" contains an invalid granted business item "{1}" in the metadata
control. Please redesign a new metadata control. (CSM 00103)..........................................139
The Business Security Profile "{0}" contains an invalid denied perspective "{1}" in the metadata
control. Please redesign a new metadata control. (CSM 00104)..........................................139
The Business Security Profile "{0}" contains an invalid denied perspective "{1}" in the metadata
control. Please redesign a new metadata control. (CSM 00104)..........................................139
The Business Security Provider "{0}" contains an invalid granted perspective "{1}" in the metadata
control. Please redesign a new metadata control. (CSM 00105)..........................................140
The Business Security Profile "{0}" contains an invalid denied business item "{1}" in the data
control. Please redesign a new data control. (CSM 00106)..................................................140
The Business Security Profile "{0}" contains an invalid granted business item "{1}" in the data
control. Please redesign a new data control. (CSM 00107)..................................................140
The Business Security Profile "{0}" contains an invalid filter "{1}" assignment. Please redesign a
new Business Security Profile filter. (CSM 00108)...............................................................140
The Business Security Profile "{0}" contains a filter "{1}" with an invalid query definition. Please
redesign a new Business Security Profile filter. (CSM 00109)..............................................141
The Business Security Provider "{0}" contains an invalid member set "{1}". Please redesign a new
Business Security Provider security member set. (CSM 00110)..........................................141
The Business Security Profile "{0}" contains a member set "{1}" which has no hierarchy assignment.
Please redesign a new BSP security member set. (CSM 00111).........................................141
The member set "{0}" contains an invalid hierarchy "{1}". Please redesign a new Business Security
Profile security member set. (CSM 00112)..........................................................................142
8.1
8.1.1
8.1.2
8.1.3
8.2
8.2.1
8.2.2
8.2.3
8.2.4
8.2.5
8.3
8.3.1
8.3.2
8.4
Data Access Error Messages..............................................................................................143Chapter 8
Database (DA) Error Messages...........................................................................................143
Connection or SQL sentence error. (DA0005).....................................................................143
BLOB column cannot fetch more than one row. (DA0009)...................................................144
Some of the objects from the universe are missing or ambiguous. You cannot run the query on
this universe. (DA0010).......................................................................................................144
Data Provider (DMA) Error Messages..................................................................................144
Bad hierarchy name (DMA0002)..........................................................................................145
Export failed! (DMA0005).....................................................................................................145
Editing this data provider requires an additional BusinessObjects component which has not been
installed on your computer. Please contact your system administrator. (DMA0006)............146
The following data providers have not been successfully refreshed (DMA0007)..................147
A variable prevented the data provider from being refreshed. (DMA0008)...........................147
File (DPP) Error Messages...................................................................................................147
Cannot open file. (DPP0001)...............................................................................................148
You are not authorized to use this stored procedure. (DPP0002).........................................148
Connection (DPQ) Error Messages......................................................................................148
2010-11-058
Contents
8.4.1
8.4.2
8.4.3
8.4.4
8.5
8.5.1
8.5.2
8.6
8.6.1
8.7
8.7.1
8.7.2
8.7.3
8.7.4
8.7.5
8.7.6
8.7.7
8.7.8
8.7.9
8.7.10
8.7.11
8.7.12
8.7.13
8.7.14
8.7.15
8.7.16
8.7.17
8.7.18
8.7.19
8.7.20
8.7.21
8.7.22
8.7.23
8.7.24
Connection is not defined. (DPQ0001).................................................................................149
The server is not responding! (DPQ0003)............................................................................149
Connection problem (DPQ0005)..........................................................................................149
Does not exist. (DPQ0006)..................................................................................................150
Stored Procedures (DPS) Error Messages..........................................................................150
This stored procedure has been removed. (DPS0001).........................................................150
You are not allowed to use this stored procedure (DPS0002)..............................................151
SQL (QPF) Error Messages.................................................................................................151
The only authorized SQL command is ""Select"" (QPF0001)................................................151
SQL Query (QP) Error Messages.........................................................................................151
Error during SQL generation. (QP0001)...............................................................................152
Internal memory error during SQL generation. (QP0002).....................................................152
Memory error during SQL generation. (QP0003).................................................................152
Incompatible combination of objects. (QP0004)...................................................................152
Outer joins are incoherent. (QP0005)...................................................................................153
Cartesian product not allowed. (QP0006)............................................................................153
The query does not reference a table. (QP0007)..................................................................153
There is a reference to a table that has been deleted. (QP0008)..........................................154
One of the objects in the query is not valid. (QP0009).........................................................154
One of the properties in the query is not valid. (QP0010).....................................................154
The .PRM file cannot be found. (QP0011)............................................................................154
The complex condition has created a Cartesian product. (QP0013).....................................155
Loop in complex condition. (QP0014)...................................................................................155
This query is too complex. One of the subqueries contains incompatible objects. (QP0015).155
The server is not responding. (QP0016)...............................................................................156
Columns of the SELECT clause are different from the result objects. (QP0017)..................156
Syntax error in variable. (QP0018).......................................................................................156
You are not authorized to use the object. (QP0019).............................................................157
Aggregate aware resolution failed. (QP0020).......................................................................158
Ambiguous condition on a measure. Remove it or cancel your scope of analysis. (QP0021).158
You cannot create a new tab before including at least one result object in this tab. (QP0022).159
You cannot combine subqueries. (QP0023).........................................................................159
You cannot delete this query. You must delete the condition first. (QP0025).......................159
Some obsolete objects have been removed from the query. (QP0027)................................159
9.1
9.2
9.3
9.4
9.5
Data Federation (DFA) Error Messages..............................................................................161Chapter 9
Cannot find the data federation driver. (DFA 0003)..............................................................161
Problem getting metadata for catalogs. (DFA 00010)...........................................................161
Cannot retrieve driver properties for URL : '{0}' (DFA 0030)................................................161
An internal error occurred. (DFA 20001)..............................................................................162
Problem getting metadata for catalogs. (DFA 30001)...........................................................162
2010-11-059
Contents
9.6
9.7
9.8
9.9
9.10
9.11
9.12
9.13
9.14
9.15
9.16
9.17
9.18
9.19
9.20
9.21
9.22
9.23
9.24
9.25
9.26
9.27
9.28
9.29
9.30
9.31
Cannot connect to the server that hosts the data federation service. (DFA 40001)..............162
Cannot find the data federation driver. (DFA 40002)............................................................162
Cannot retrieve driver properties for URL : '{0}' (DFA 40003)..............................................162
An error occured when retrieving connection id. (DFA 40004).............................................163
An error occured when explaining the query on the data federation query engine. (DFA
50001).................................................................................................................................163
The list of functions cannot be retrieved from the data federation service. (DFA 50002)......163
An error occured when executing the query on the data federation query engine. (DFA
50003).................................................................................................................................163
An error occurred while executing an XPath query on the XML result returned by the data
federation service. (DFA 50004)..........................................................................................164
An error occurred while parsing the XML returned by the data federation service. (DFA
50005).................................................................................................................................164
An error occurred while preparing a query. (DFA 50006)......................................................164
Cannot get system properties. (DFA 60001)........................................................................164
An error occurred while cancelling a query. (DFA 50007).....................................................165
Too many rows to display. Maximum allowed is '999'. (DFA 50008).....................................165
Cannot reset the configuration for connector '{0}'. (DFA 60002)..........................................165
Cannot get the configuration for connector '{0}'. (DFA 60003).............................................165
Cannot update the configuration for connector '{0}'. (DFA 60004)........................................165
Cannot ping the connector '{0}'. (DFA 60005)......................................................................166
Cannot get the connector '{0}' capabilities. (DFA 60006).....................................................166
Cannot retrieve statistics from the data federation service. (DFA 70001).............................166
Cannot update statistics. (DFA 70002)................................................................................166
Cannot get system parameters. (DFA 80002)......................................................................167
Cannot get session parameters. (DFA 80003).....................................................................167
Cannot get startup parameters. (DFA 80004)......................................................................167
Cannot update the system parameter '{0}'. (DFA 80005).....................................................167
Cannot update the session parameter '{0}'. (DFA 80006).....................................................167
Cannot restore default value of system parameters. (DFA 80007).......................................168
10.1
10.1.1
10.2
10.2.1
10.2.2
10.2.3
10.2.4
10.2.5
10.2.6
Document and Universe Exchange Error Messages...........................................................169Chapter 10
Category (CAT) Error Messages..........................................................................................169
The category name contains invalid characters. Valid characters are: (CAT0001)................169
Document Exchange (DX) Error Messages..........................................................................169
Cannot generate temporary file. (DX0001)...........................................................................170
The file will not be secured on your workstation. (DX0002)..................................................170
RSS file not accessible. (DX0003).......................................................................................170
Wrong SQL used. (DX0004)................................................................................................171
Error during import. (DX0005)..............................................................................................171
Error during import. (DX0007)..............................................................................................171
2010-11-0510
Contents
10.2.7
10.2.8
10.2.9
10.2.10
10.2.11
10.2.12
10.2.13
10.2.14
10.2.15
10.2.16
10.2.17
10.2.18
10.2.19
10.2.20
10.2.21
10.2.22
10.2.23
10.2.24
10.2.25
10.2.26
10.3
10.3.1
10.3.2
10.3.3
10.3.4
10.3.5
Unknown error during import of <document>. Import canceled. <document> cannot be imported.
(DX0009).............................................................................................................................172
Unable to close <document>. Import canceled. <document> cannot be imported. (DX0010).172
Unable to create file associated with <document>. Import canceled. <document> cannot be
imported. (DX0011).............................................................................................................173
Unable to delete previous file. Import canceled. <document> cannot be imported. (DX0012).173
Unable to write to <document>. Import canceled. <document> cannot be imported.
(DX0014).............................................................................................................................174
The file cannot be deleted. (DX0017)...................................................................................174
The file name is not compliant with the platform you are working on. Change the name.
(DX0018).............................................................................................................................174
You requested to export the secured file <document>. This action on the file is forbidden to you.
The export was canceled for <document>. (DX0022)...........................................................175
Unknown error during export of <document>. Export stopped. <document> not exported.
(DX0024).............................................................................................................................175
Database error during export of <document>. Export stopped. <document> not exported.
(DX0025).............................................................................................................................175
Break during export of <document>: Export has stopped. <document> is not exported.
(DX0026).............................................................................................................................176
Cannot open file associated with <document>. <document> not exported. (DX0027).........176
Cannot load the dll. Check the Microsoft Exchange installation. (DX0037)...........................176
Cannot open file associated with <document>. (DX0040)....................................................177
Cannot send the message. (DX0041)..................................................................................177
Unable to get the document's properties! (DX0044)............................................................177
Database error (DX0045).....................................................................................................178
The document domain is not responding! (DX0046).............................................................178
You need a more recent version of BusinessObjects to import this document. (DX0047).....178
Document deletion failed. (DX 00050)..................................................................................179
Universe Exchange (UX) Error Messages.............................................................................179
UX0001 - UX0019................................................................................................................179
UX0020 - UX0039................................................................................................................182
UX0040 - UX0049................................................................................................................185
UX0050 - UX0059................................................................................................................189
UX0060 - UX0071................................................................................................................192
11.1
11.1.1
11.1.2
12.1
Enterprise Application Errors..............................................................................................197Chapter 11
Enterprise Applications - SAP (EAS) Errors..........................................................................197
EAS 10001 - 10010.............................................................................................................197
EAS 30001..........................................................................................................................200
Publishing (FBE) Errors.......................................................................................................201Chapter 12
FBE 40000 - 49999..............................................................................................................201
2010-11-0511
Contents
12.1.1
12.1.2
12.1.3
12.1.4
12.1.5
12.1.6
12.1.7
12.1.8
12.1.9
12.1.10
12.1.11
12.1.12
12.1.13
12.1.14
12.1.15
12.1.16
12.1.17
12.1.18
12.1.19
12.1.20
12.1.21
12.1.22
12.1.23
12.1.24
The method {0} was called with the parameter {1} set to null. Please initialize this parameter.
(FBE42001)..........................................................................................................................201
The Post-Processing plugin with class {0} could not be located. Did you configure your publication
properly? (FBE42003)..........................................................................................................201
Unable to download the artifact's files. Is the FRS accessible, and are the file access permissions
configured properly? (FBE42008).........................................................................................202
The publication's OnPostProcessPersonalizedDocs plugin is not defined for merge
format(CeMergedFormat): {0}. Did you configure your publication properly? (FBE42009).....202
An IO Error occurred while attempting to merge artifacts into zip file {0}. Are the file access rights
configured properly? (FBE42014).........................................................................................202
A publication instance with ID {0} is already being processed and cannot be restarted until the
initial run has completed. (FBE42016)..................................................................................202
Empty global delivery rule expression specified. Did you properly configure your publication?
(FBE42017)..........................................................................................................................203
Global delivery rule document with CUID {0} is not valid. Did you properly configure your
publication? (FBE42018)......................................................................................................203
Publication with ID {0} has an inaccessible source document. Did you configure your publication
properly? (FBE42033)..........................................................................................................203
The document with ID {0} does not use the IPublicationInfo interface and cannot be processed
with this publication. (FBE42034).........................................................................................203
The Business Objects report engine could not handle the specified report type {0}.
(FBE42042)..........................................................................................................................204
Unable to find the static document with CUID {0} during distribution. Did you configure your
publication properly? (FBE42044).........................................................................................204
Unable to find the publication artifact with ID {0} during distribution. (FBE42045).................204
Unable to find the destination plugin with prog ID {0}. Did you configure your publication properly?
(FBE42046)..........................................................................................................................205
Unable to find the last processed recipient {0} in the data provider's data. If the database changed
since the last run, please reschedule the publication. (FBE42048)........................................205
The post-distribution plugin with class {0} failed to execute. Did you configure your plugin properly?
(FBE42049)..........................................................................................................................205
Failed to merge MHTML documents. (FBE42050)................................................................205
Could not find HTML part of MHTML document. (FBE42051)..............................................206
Unable to find valid profile value from principal with ID {0} for Profile with ID {1}. (FBE42052).206
Scheduling the global delivery rule document failed. (FBE42055).........................................206
Unable to schedule document with id {0} for publication with id {1} due to insufficient access
rights to the source document. (FBE42056).........................................................................206
Unable to find a profile filter expression for the document type "{0}" for the user or group ID {1}
and profile ID {2}. Ensure that your administrator has set a filter expression for document type
"{0}" in the profile in the Central Management Console. (FBE42057)....................................207
Unable to download MHTML documents. Please contact your administrator to ensure the Central
Management Server and the Input and Output File Repository Servers servers are running
properly. (FBE42058)...........................................................................................................207
Could not upload administrative logs to CMS: {0} (FBE42059).............................................207
2010-11-0512
Contents
12.1.25
12.1.26
12.1.27
12.1.28
12.1.29
12.1.30
12.1.31
12.2
12.2.1
12.2.2
12.2.3
12.2.4
12.2.5
12.2.6
12.2.7
12.2.8
12.2.9
12.2.10
12.2.11
12.2.12
12.2.13
12.2.14
12.2.15
12.2.16
An enterprise user name "{1}" was specified for the dynamic recipient "{0}" but no enterprise user
with that user name exists. (FBE42060)...............................................................................207
Multiple enterprise user names were specified for the dynamic recipient with ID "{0}". Only one
enterprise user name may be specified per dynamic recipient. (FBE42061)..........................208
A task was unexpectedly interrupted while waiting to be processed for publication with ID {0}.
(FBE42062)..........................................................................................................................208
A service instance could not be found for process the document with ID "{0}", Name "{1}", Kind
"{2}". (FBE42063).................................................................................................................208
Service with ID "{0}", Name "{1}" hosted on server with ID "{2}" does not specify the maxJobs
property. (FBE42064)...........................................................................................................208
Service Hosts were not found for the service with ID "{0}", Name "{1}". (FBE42066)............209
StatusMonitor query for job status did not return result for job with ID "{0}". Was the object
deleted? (FBE42067)...........................................................................................................209
FBE 60000 - 69999..............................................................................................................209
Unable to find the infostore service. Is your CMS running and configured properly? (FBE
60002).................................................................................................................................209
An SDKException was caught. Is your CMS running and configured properly? (FBE 60003).210
Unable to determine publication submitter ID in publication instance '{0}' (ID: {1}) - processing
cannot continue! Did you configure your publication properly? (FBE 60004).........................210
Unable to determine publication owner ID in publication instance '{0}' (ID: {1}) - processing cannot
continue! Did you configure your publication properly? (FBE 60005)....................................210
Distribution to destination {0} failed. Recipient: {1}, Document Scope: {2}. {3} (FBE 60013)..210
Unable to find any distributable documents in scope batch with ID {0}. Please check your
publication configuration and ensure that the CMS is running. (FBE 60016).........................211
Unknown Destination Type: {0}. Did you properly configure your publication? (FBE 60019)...211
Could not complete post-distribution event handlers in scope batch with SI_ID {0}. Did you
properly configure your publication? (FBE 60022).................................................................211
Unable to find a static document with ID {0} for scope batch with SI_ID {1}, scope {2}. (FBE
60025).................................................................................................................................211
Unable to find a publication document with source document SI_ID {0}, format {1} for scope batch
with ID {2}, scope {3}. (FBE 60026)......................................................................................212
Invalid plugin configuration for plugin: {0}. Did you properly configure your publication? (FBE
60027).................................................................................................................................212
Failed to execute post-distribution plugin {0} for scope batch {1} [recipients "{2}" to "{3}"]. (FBE
60029).................................................................................................................................212
Unable to grant View/ViewInstance rights on the Artifact with ID {0} for scope batch object with
ID {1}. Is everything configured correctly? (FBE 60033)........................................................212
Unable to find any distributable documents in scope batch with ID {0}, scope {1}. (FBE 60034).213
Cannot deliver artifact because you do not have the "Subscribe to publications" right on enterprise
recipient \"{0}\" (id {1}). Contact your BusinessObjects Enterprise administrator to be granted
this right. (FBE 60036).........................................................................................................213
Waiting for distribution job to complete. Job ID:%1, name:%2, kind:%3 in %4 state (FBE
60037).................................................................................................................................213
2010-11-0513
Contents
12.2.17
12.2.18
12.2.19
12.2.20
12.2.21
12.2.22
12.2.23
12.2.24
12.2.25
12.2.26
12.2.27
12.2.28
12.2.29
12.2.30
12.2.31
12.2.32
12.2.33
12.2.34
12.2.35
12.2.36
12.2.37
12.2.38
12.2.39
12.2.40
12.2.41
There are no To or CC addresses in the SMTP options. Email delivery without an address will
fail. The To or CC address should include either an email address or the %SI_EMAIL_ADDRESS%
placeholder. (FBE 60038).....................................................................................................213
Attempted to replace an %SI_EMAIL_ADDRESS% placeholder, but the email address for the
recipient with user name "{0}" is empty or missing. (FBE 60039)..........................................214
Skipping clean-up of the scope batch and artifacts because auditing is enabled. (FBE 60040).214
Unable to download MHTML documents. Please contact your administrator to ensure the Central
Management Server and the Input and Output File Repository Servers servers are running
properly. (FBE 60041)..........................................................................................................214
Invalid expression {0} specified for the global delivery rule document with ID: {1}. Global delivery
rule check can not continue. Is your publication configured properly? (FBE 60100)..............215
Publication global delivery rule document with ID {0} is invalid. Is your publication configured
properly? (FBE 60101).........................................................................................................215
Failed to schedule the global delivery rule document with ID {0}: {1} (FBE 60105)................215
Unable to query global delivery document with ID {0}. (FBE 60106)......................................215
Waiting for global delivery rule job to complete. Job ID:%1, name:%2, kind:%3 in %4 state (FBE
60107).................................................................................................................................216
Post-processing plugin failure! Cannot instantiate plugin class {0}. (FBE 60208)...................216
The publishing service is not started or was restarted while the publication job was running. (FBE
60211).................................................................................................................................216
WebI publications support only the "One database fetch for all recipients" and "One database
fetch per recipient" bursting methods. (FBE 60212).............................................................216
This publication references a profile object with ID {0} that no longer exists in the system. (FBE
60213).................................................................................................................................217
Unable to find a static document with ID {0} for scope batch with ID {1}, scope {2}. (FBE
60216).................................................................................................................................217
Unable to find a publication document with source document ID {0}, format {1} for scope batch
with ID {2}, scope {3}. (FBE 60217)......................................................................................217
Plugin artifact {0} with ID {1} for scope batch with ID {2} does not specify a destination. (FBE
60218).................................................................................................................................217
An artifact {0} with ID {1} for scope batch with ID {2} does not contain enough information to be
distributed. (FBE 60219)......................................................................................................218
Error retrieving document objects for scope batch with ID {0}. (FBE 60220).........................218
An unsupported busting mode for this publication was chosen. (FBE 60224).......................218
{0} publications do not support "One database fetch for all recipients" bursting method. (FBE
60225).................................................................................................................................218
{0} publications do not support "One database fetch for each batch of recipients" bursting method.
(FBE 60226).........................................................................................................................219
{0} publications do not support "One database fetch per recipient" bursting method. (FBE
60227).................................................................................................................................219
{0} publications do not support selected bursting method. (FBE 60228)...............................219
Unable to run redistribution for principal(s) {0} because they are not original publication recipients.
(FBE 60314).........................................................................................................................219
Unable to run redistribution for dynamic recipient(s) {0} because they are not original publication
recipients. (FBE 60315)........................................................................................................220
2010-11-0514
Contents
12.2.42
12.2.43
12.2.44
12.2.45
12.2.46
12.2.47
12.2.48
12.2.49
12.2.50
12.2.51
12.2.52
12.2.53
12.2.54
12.2.55
12.2.56
12.2.57
12.2.58
12.2.59
12.2.60
12.2.61
12.2.62
12.2.63
12.2.64
12.2.65
Unable to find a profile filter expression for the document type "{0}" for the user or group '{1}'
(ID: {2}) and profile '{3}' (ID: {4}). Please ensure that your administrator has set a filter expression
for document type "{0}" in the profile in the Central Management Console. (FBE 60317).....220
The user who scheduled the publication does not have the view right on the enterprise recipient
principal with ID {0}. (FBE 60318).........................................................................................220
The user who scheduled the publication does not have the view right on the excluded enterprise
recipient principal with ID {0}. (FBE 60319)...........................................................................220
The user who scheduled the publication does not have the view right on the profile with ID {0}.
(FBE 60320).........................................................................................................................221
The user who scheduled the publication does not have the view right on the group with ID {0}
which is a parent group of the principal '{1}' (ID {2}). Any profile values from this group and its
parent groups will not be applied. (FBE 60321)....................................................................221
The limit of {0} recipients per publication has been reached. User {1} with ID {2} was not processed.
(FBE 60322).........................................................................................................................221
Unable to redistribute publication instance with ID {0}, because artifacts were not delivered to
the default Enterprise location. (FBE 60323)........................................................................222
Unable to locate precise publication with SI_ID {0}, and/or precise scope batch with SI_ID {1}.
Is your publication configured properly, and is the CMS running? (FBE 60400)....................222
An exception was caught during post-processing. (FBE 60401)...........................................222
Unable to retrieve post-processing publication event handler (post-processing will be skipped).
(FBE 60402).........................................................................................................................222
No scopes found in scope batch with SI_ID {0}. Is everything configured correctly? (FBE
60404).................................................................................................................................223
Post-processing plugin failure! Plugin class {0} threw an exception. (FBE 60405).................223
Post-processing plugin class {0} returned a set of null or zero info objects. (FBE 60406).....223
Unable to find a Post-Processing plugin matching the specified classname: {0}. (FBE 60408).224
A plugin-generated artifact was created that does not implement IPublicationInfo. The artifact
may not be distributed properly: Title = '{0}', Kind = '{1}' (FBE 60409)..................................224
An exception was caught while commiting the plugin-generated artifacts created by the
Post-Processing Plugin class {0}. (FBE 60410).....................................................................224
An exception was caught while creating a plugin-generated artifact with progID {0} for the
Post-Processing Plugin class {1}. (FBE 60411).....................................................................224
An exception occurred while trying to retrieve artifact and static documents for this context:
ScopeBatch = {0}, Destination = {1}, Plugin Class = {2} (FBE 60412)...................................225
An exception occurred while trying to sort artifact and static documents (according to the source
document order) for this context : ScopeBatch = {0}, Destination = {1}, Plugin Class= {2} (FBE
60413).................................................................................................................................225
An exception occurred while trying to retrieve the publication's source documents. (FBE
60414).................................................................................................................................225
Post-processing skipping scope level doc with SI_ID: {0} that was not listed as a source document
on the publication. Is your publication configured correctly? (FBE 60415).............................225
Scheduling document job "{2}" (ID: {0}) failed: {1} (FBE 60502).............................................226
There are no schedulable documents in the publication. (FBE 60503)..................................226
The list of documents in the publications contains an empty value. Is everything configured
correctly? (FBE 60504)........................................................................................................226
2010-11-0515
Contents
12.2.66
12.2.67
12.2.68
12.2.69
12.2.70
12.2.71
12.2.72
12.2.73
12.2.74
12.2.75
13.1
13.1.1
13.1.2
13.1.3
13.2
13.2.1
Document '{0}' is an invalid publication document and cannot be published. (FBE 60505).....226
Unable to add document field mappings into target document. Is everything configured correctly?
(FBE 60506).........................................................................................................................227
Document '{0}' does not have exactly 1 instance containing state information (was either 0 or
>1 or could not be retrieved). (FBE 60507)..........................................................................227
Waiting for scheduling job to complete. Job ID:%1, name:%2, kind:%3 in %4 state (FBE
60509).................................................................................................................................227
Warning while running document job "{0}" (id {1}): {2} (FBE 60510).......................................227
Error while processing document "{0}" (id {1}): {2} (FBE 60512)............................................228
Warning while processing document "{0}" (id {1}): {2} (FBE 60513).......................................228
Document processing could not be started due to invalid parameters (FBE 60600).............228
Plugin kind {0} could not be processed for publication (FBE 60601)......................................228
{0} exception, Message: {1} (FBE 60602).............................................................................229
GUI Error Messages............................................................................................................231Chapter 13
GUI (GUI) Error Messages...................................................................................................231
The file name contains forbidden characters. (GUI0003) .....................................................231
File not found. Please verify the correct file name was given. (GUI0005)..............................232
<name> path not found. Please verify the correct path name was given. (GUI0006)............232
GUI (USU) Error Messages.................................................................................................232
Cannot find <name>. Please check that all components have been correctly installed.
(USU0001)..........................................................................................................................232
14.1
14.1.1
14.1.2
14.1.3
14.1.4
14.2
14.2.1
14.2.2
14.3
14.3.1
14.3.2
14.3.3
14.3.4
14.3.5
14.3.6
14.3.7
Information Design Tool (IDT) error messages...................................................................235Chapter 14
00 messages (Security login, authentication, CMS and sessions)........................................236
A problem occured when publishing or sharing a resource in the repository, in the folder: {0}.
(IDT 00420)..........................................................................................................................236
Unable to create Universe file in folder: {0}. (IDT 00425)......................................................236
An error occured when accessing a the resource {0} in the repository. (IDT 00630).............237
An error occured when retrieving universe {0} from the repository. (IDT 00631)...................237
02 messages (Framework)...................................................................................................237
An error occured when accessing the ressource {0}. (IDT 02300)........................................238
An error occured when retrieving the universe {0}. (IDT 02311)...........................................238
06 messages (Security SL)..................................................................................................238
An error occured when saving the Data Security Profile Connection {0}. (IDT 06103)..........238
An error occured when creating the Data Security Profile {0}. (IDT 06120)..........................239
An error occured when saving Data Security Profiles aggregation options {0}. (IDT 06130)..239
An error occured when assigning the security profile {0} to a user or a group. (IDT 06150)...239
An error occured when retrieving security profile for the universe {0}. (IDT 06200)..............240
An error occured when retrieving security for the universe {0}. (IDT 06201).........................240
An error occured when accessing Data Security Profile {0}. (IDT 06202).............................240
2010-11-0516
Contents
14.3.8
14.3.9
14.3.10
14.3.11
14.4
14.4.1
14.4.2
14.4.3
14.4.4
14.4.5
14.4.6
14.4.7
14.4.8
14.4.9
14.4.10
14.4.11
14.5
14.5.1
14.5.2
14.5.3
14.5.4
14.5.5
14.5.6
An error occured when retrieving Business Security Profile for the universe {0}. (IDT 06203).241
An error occured when retrieving Data Security Profile aggregation's options for the universe
{0}. (IDT 06204)...................................................................................................................241
An error occured when retrieving Business Security Profile aggregation's options for the universe
{0}. (IDT 06205)...................................................................................................................241
An error occured when retrieving users or groups assigned to the security profile {0}. (IDT
06210).................................................................................................................................242
095 messages (Conversion)................................................................................................242
The universe file must be generated using a more recent product version. Universe file path: {0}.
(IDT 09501)..........................................................................................................................242
Cannot open the Universe file. Check that this file is not corrupted. (IDT 09502).................242
The conversion of OLAP universes is not supported. (IDT 09503).......................................243
The conversion of universes with stored procedures is not supported. (IDT 09504).............243
The conversion of secured universes from a file is not supported. Use the convert from CMS
option instead. (IDT 09505)..................................................................................................243
Cannot convert the universe. The universe must have a connection assigned in the universe
design tool. (IDT 09506)......................................................................................................243
The conversion of universes with a Data Federator connection is not supported. (IDT 09507).244
Cannot read the core universe %s from the CMS. (IDT 09508)...........................................244
Cannot read the universe from the CMS. (IDT 09509).........................................................244
The conversion of a password protected universe is not supported. In the universe design tool,
remove the password. (IDT 095010)....................................................................................244
Your user profile does not allow you to convert a universe. (IDT 095011)............................245
15 messages (Generic connections)....................................................................................245
This Security Profile does not exist. (IDT 15020)..................................................................245
This user or group does not exist. (IDT 15021)....................................................................245
Derived tables are not supported as replacement tables in a Data Security Profile. (IDT
15022).................................................................................................................................245
Calculated columns are not supported in Rows setting of the Data Security Profile. (IDT
15023).................................................................................................................................246
Derived tables are not supported in Rows setting of the Data Security Profile. (IDT 15024).246
Unable to retrieve the connection from the CMS. Check if the connection exists in the CMS and
if you have rights. (IDT 15025).............................................................................................246
15.1
15.2
15.3
15.4
15.5
15.6
15.7
Information Engine Services (IES) Error Messages.............................................................247Chapter 15
Some objects are no longer available in the universe. (IES 00001).......................................247
Some objects are not available to your user profile. You cannot refresh this document. (IES
00002).................................................................................................................................247
Some pre-defined filters are no longer available in the universe. (IES 00003).......................247
Some database tables are no longer available in the universe. (IES 00004)..........................248
Invalid prompt definition. (IES 00005)...................................................................................248
Invalid definition of aggregate aware object. (IES 00006)......................................................248
A filter contains an incorrect value. You cannot run this query. (IES 00007).........................248
2010-11-0517
Contents
15.8
15.9
15.10
15.11
15.12
15.13
15.14
15.15
15.16
15.17
15.18
15.19
15.20
15.21
15.22
15.23
15.24
15.25
15.26
15.27
15.28
15.29
15.30
15.31
15.32
15.33
15.34
15.35
15.36
15.37
15.38
15.39
15.40
15.41
The query cannot run because it contains incompatible objects. (IES 00008).......................249
The query cannot run because an advanced filter contains an incompatible object. (IES
00009).................................................................................................................................249
The universe does not allow complex expressions in a GROUP BY statement. (IES 00010).249
The object {obj_list} contains multiple attributes. This syntax is no longer supported. (IES
00011).................................................................................................................................250
You cannot run this query because it will produce a Cartesian product. (IES 00012)............250
SQL generation failed. (IES 00013)......................................................................................250
Aggregate aware resolution failed. (IES 00014)....................................................................251
Multiple query filters contain a prompt with the same text, but the prompts use a different operand
type or number of values. (IES 00015).................................................................................251
The query contains a @script() function, which is not supported. (IES 00016)......................251
The following objects cannot be used as result objects: {obj_list}. (IES 00017).....................251
The following objects cannot be used as query filters: {obj_list}. (IES 00018).......................252
A query filter contains too many values. (IES 00019)............................................................252
The SQL generated by the query is invalid. (IES 00020).......................................................252
The combined query cannot run because one of the queries contains incompatible objects. (IES
00021).................................................................................................................................252
The query does not reference a table in the WHERE clause. (IES 00022).............................252
Invalid sub-query. (IES 00023)..............................................................................................253
Incompatible object types in the subquery. (IES 00024).......................................................253
The query is too complex to apply a sampling function. (IES 00025).....................................253
Failed to regenerate SQL for optional prompts -- one or more required prompts were skipped.
(IES 00026)..........................................................................................................................253
Removing optional prompts from the query will introduce new prompts. This introduces
complexities that cannot be supported. (IES 00027).............................................................254
No value specified for the Keydate parameter. (IES 00028).................................................254
The universe is already open with write permission by another user. (IES 00029).................254
The universe is already open with write permission by another user. (IES 00029).................254
Syntax error in formula '%1%' at position %2%. (IES 10001)...............................................255
Problem initializing the dictionary of functions. (IES 10002)..................................................255
The object '%1%' at position '%2%' is not unique in the report. (IES 10005)........................255
The object '%1%' at position '%2%' does not exist in the report. (IES 10006)......................255
The integer '%1%' at position '%2%' is too long. (IES 10013)..............................................255
The number '%1%' at position '%2%' has a format that is incompatible with your regional settings.
(IES 10014)..........................................................................................................................256
Missing quotation mark after '%1%' at position '%2%'. (IES 10016)....................................256
The list of dimensions in the input or output context is empty. (IES 10032)..........................256
The variable '%1%' cannot be deleted because it has dependant formulas or variables linked to:
'%2%'. (IES 10033)..............................................................................................................256
You attempted to create a variable or update a variable name using a variable name that already
exists. (IES 10034)...............................................................................................................257
The date or time format '%1%' at position '%2%' is not valid. (IES 10035)...........................257
2010-11-0518
Contents
15.42
15.43
15.44
15.45
15.46
15.47
15.48
15.49
15.50
15.51
15.52
15.53
15.54
15.55
15.56
15.57
15.58
15.59
15.60
15.61
15.62
15.63
15.64
15.65
15.66
15.67
15.68
15.69
15.70
15.71
15.72
15.73
15.74
15.75
15.76
The expression or sub-expression at position '%2%' is not valid. (IES 10036)......................257
The expression or sub-expression at position '%2%' in the '%1%' function uses an invalid data
type. (IES 10037).................................................................................................................257
Invalid character '%1%' in variable name at position '%2%'. (IES 10038)..............................258
The formula for variable '%1%' contains a reference to a variable with the same short name. (IES
10040).................................................................................................................................258
Incorrect use of multiple comparison operators (<,>,<>,<=,>=,=) at position '%2%'. (IES
10041).................................................................................................................................258
There is a circular reference because the formula for variable '%1%' references a variable whose
formula references '%1%' .(IES 10042)................................................................................258
The function '%1%' has missing arguments or closing parenthesis at position %2%. (IES
10061).................................................................................................................................259
Missing ';' or closing parenthesis in list '%1%' at position %2%. (IES 10064).......................259
Missing object identifier in '%1%' at position %2%. (IES 10069)..........................................259
Incorrect reset context at position %2%. (IES 10072)..........................................................259
The object '%1%' at position %2% is incompatible. (IES 10077)..........................................259
Invalid string '%1%' at position %2%. (IES 10082)...............................................................260
The qualification of the variable '%1%' cannot be changed. (IES 10083)...............................260
Invalid set definition. (IES 10086).........................................................................................260
Custom functions could not be loaded. (IES 10100).............................................................260
Your database server does not support the Both and Except operators. (IES 10701)...........261
A filter is defined on an object that is incompatible with the result objects. (IES 10702).......261
The numeric value for the query filter based on '{object}' is invalid. (IES 10703)...................261
The date for the prompt '{prompt}' is invalid. (IES 1070) (IES 10704)....................................261
The prompt '{prompt}' contains an invalid numeric value. (IES 10705)...................................262
The date for the prompt '{prompt}' is invalid. (IES 10706).....................................................262
The server cannot build the SQL for the query. (IES 10707).................................................262
The object '{ObjName}' in the prompt '{PromptName}' can no longer display a list of values.
Remove the prompt from the query or contact your administrator to clear the "Select only from
list" option of the object properties tab. (IES 10708)............................................................262
You do not have the right to refresh this document. (IES 10801)..........................................263
The query SQL has {nbHaving} instead of {nbWanted} columns. (IES 10810).......................263
The data type of a column in the query is not valid. (IES 10811)...........................................263
Custom SQL cannot contain optional prompts. (IES 10812).................................................263
Incompatible objects cannot be used in combined queries. (IES 10820)...............................263
A subquery in the '{dp_name}' data provider has missing objects. (IES 10830).....................264
The filtered object is missing in a ranking in the '{dp_name}' data provider. (IES 10831).......264
The rank-based object is missing in a ranking in the '{dp_name}' data provider. (IES 10832)..264
The document cannot be loaded. (IES 10833)......................................................................264
Additional context resolution is not supported with optional prompts. (IES 10834)...............265
Invalid data in column "{col_name}". (IES 10840)..................................................................265
Invalid UTF-8 string in column "{col_name}". (IES 10841)......................................................265
2010-11-0519
Contents
15.77
15.78
15.79
15.80
15.81
15.82
15.83
15.84
15.85
15.86
15.87
15.88
15.89
15.90
15.91
15.92
15.93
15.94
15.95
15.96
15.97
15.98
15.99
15.100
15.101
The file that is required to create or update the query cannot be found on the file system. File
not found: "{filename}". (IES 10850)......................................................................................265
Error originates from the Personal Data Provider: {message}. (IES 10853)...........................266
Unable to create or update the Excel personal data provider: the file path is invalid. (IES
10870).................................................................................................................................266
Unable to create or update the Excel personal data provider: cannot retrieve the named ranges.
(IES 10872) (IES 10871)......................................................................................................266
Unable to create or update the Excel personal data provider: cannot open the workbook. (IES
10872).................................................................................................................................266
Unable to create or update the Excel personal data provider: cannot retrieve the named ranges.
(IES 10873)..........................................................................................................................267
Unable to create or update the Excel personal data provider: cannot retrieve data from the file.
(IES 10874)..........................................................................................................................267
Unable to create or update the Excel personal data provider: cannot retrieve data from the file.
(IES 10875)..........................................................................................................................267
Unable to create or update the Excel personal data provider: cannot build the iterator on the data
set. (IES 10876)...................................................................................................................267
Unable to create or update the Excel personal data provider: no worksheet available. (IES
10877).................................................................................................................................268
Unable to create or update the Excel personal data provider: unable to retrieve the list of
worksheets. (IES 10878)......................................................................................................268
Unable to create or update the Excel personal data provider: invalid data retrieved from the
selected range. (IES 10879).................................................................................................268
Unable to create or update the Excel personal data provider: the selected worksheet is invalid.
(IES 10880)..........................................................................................................................268
Unable to create or update the Excel personal data provider: an error occured while retrieving
the data sampling. (IES 10881).............................................................................................269
Unable to create or update the Excel personal data provider: an error occured while creating the
data iterator. (IES 10882).....................................................................................................269
Unable to create or update the Excel personal data provider: an error occured during data retrieval.
(IES 10883)..........................................................................................................................269
Unable to create or update the Excel personal data provider: an internal error occured. (IES
10884).................................................................................................................................269
Unable to create or update the Excel personal data provider: the range selection is invalid. (IES
10885).................................................................................................................................270
Unable to create or update the Excel personal data provider: the range selection does not match
the worksheet. (IES 10886)..................................................................................................270
A condition on an object refers to an object from another query that has a different type. (IES
10887).................................................................................................................................270
A condition on an object refers to an object in another query that does not exist. (IES 10888).270
There is a circular dependency in the query. (IES 10889).....................................................271
Database error: {error_db}. (IES 10901)...............................................................................271
Query exceeded fixed time limit: {error_db}. (IES 10902)......................................................271
Invalid Database Field Type : {db_fieldname}. (IES 10903)....................................................271
2010-11-0520
Contents
Installation (INS) Error Messages.......................................................................................273Chapter 16
16.1
16.1.1
16.1.2
16.1.3
16.2
16.2.1
16.2.2
16.2.3
16.2.4
16.2.5
16.2.6
16.2.7
16.2.8
16.2.9
16.2.10
16.2.11
16.2.12
16.2.13
16.2.14
16.3
16.3.1
16.3.2
16.3.3
16.3.4
16.3.5
INS 00000-00002................................................................................................................273
Please use a user account that has administrative privilege. (INS00)....................................273
Please use a user account with administrative privileges. (INS00001)..................................273
Please install Microsoft .NET Framework 2.0 or higher. (INS00002)....................................274
INS 00286-00293................................................................................................................274
BI platform services is already installed on this machine. INS000286 (INS00286)................274
Please use a user account that has administrative privilege. INS00287................................274
You cannot install this product as the root user. INS00288..................................................274
A reboot request is suppressed. Reboot current machine before the installation. INS00289.275
Please uninstall SAP Crystal Reports Server before installing SAP BusinessObjects Enterprise
XI 4.0 on the same machine. INS00290...............................................................................275
SAP BusinessObjects Enterprise is already installed on this machine. INS00291.................275
This product needs to be installed on on a 64-bit Operating System (OS). Please verify if your
OS match this requirement. INS00292.................................................................................275
localhost, 127.0.0.1 or the machine's hostname are not pingable. INS00293.......................276
There is not enough free space in /tmp. INS000295 (INS00295).........................................276
The UID and GID must not be greater than 65536. INS000296 (INS00296)........................276
Please install Microsoft .NET Framework 3.5 or higher. (INS00297)....................................276
Please install Microsoft .NET Framework 3.0 or higher. (INS00298)....................................277
Microsoft Visual Studio 2005 Tools for Office Second Edition Runtime not detected, please
install it. (INS00299)............................................................................................................277
Please install Microsoft Office 2003 or higher (INS00300)...................................................277
INS 00301-00305................................................................................................................277
Please install Microsoft Sharepoint 2007 or Microsoft Sharepoint Service 3.0. (INS00301).277
Please start Windows Sharepoint Service Administration service. (INS00302)....................278
Please install Microsoft .NET Framework 2.0 or higher. (INS00303)....................................278
Update for Microsoft Office 2003 (KB907417) (INS00304).................................................278
Please install Microsoft Visual Studio 2010 before installing this product. (INS00305).........278
17.1
17.1.1
17.1.2
17.1.3
17.1.4
17.1.5
17.1.6
17.1.7
Lifecycle management console Error Messages.................................................................279Chapter 17
Lifecycle management error messages................................................................................279
LCM CMS is either null or not logged in (LMC 00001)........................................................279
CMS is either null or not logged in. The CMS could be either source or destination (LMC
00002).................................................................................................................................280
Username is either null or empty (LMC 00003)....................................................................280
Password is either null or empty (LMC 00004).....................................................................280
There are no resources to export (LMC 00005)...................................................................280
Source CMS is either null or not logged in (LMC 00006).....................................................280
Destination CMS is either null or not logged in (LMC 00007)..............................................281
2010-11-0521
Contents
17.1.8
17.1.9
17.1.10
17.1.11
17.1.12
17.1.13
17.1.14
17.1.15
17.1.16
17.1.17
17.1.18
17.1.19
17.1.20
17.1.21
17.1.22
17.1.23
17.1.24
17.1.25
17.1.26
17.1.27
17.1.28
17.1.29
17.1.30
17.1.31
17.1.32
17.1.33
17.1.34
17.1.35
17.1.36
17.1.37
17.1.38
17.1.39
17.1.40
17.1.41
17.1.42
17.1.43
Destination cannot be same as the Source.(LMC 00008)....................................................281
Login to BusinessObjects LifeCycle Manager failed.(LMS 00001).......................................281
Log off from the Lifecycle management console for SAP BusinessObjects Enterprise failed. (LMS
00002).................................................................................................................................281
The job contains parent id which is less than zero. This job is invalid.(LMS 00003)..............282
Job creation failed. Please refer to the stack trace (LMS 00004).........................................282
Failed to save the job (LMS 00005).....................................................................................282
Failed to create a job from an existing job (LMS 00006).......................................................282
Login to CMS (source / destination) failed (LMS 00007).....................................................282
Log off from CMS (source / destination) failed (LMS 00008)..............................................283
Job did not promote successfully (LMS 00009)...................................................................283
Please check the stack trace to determine why the job has failed to run (LMS 00010).........283
Scheduling of job failed (LMS 00011)..................................................................................283
Unable to retrieve job. Please select a valid LCM Job.(LMS 00012)....................................284
Unable to retrieve job by name (LMS 00013).......................................................................284
Failed to retrieve job history.(LMS 00014)...........................................................................284
Unable to retrieve unique resources from the given set of dependencies.(LMS 00015).......284
Unable to retrieve the infoobject with cuid = {0}.(LMS 00016)..............................................284
The resources in the job are not rolled back. Please refer to the stack trace (LMS 00017)...285
Unable to delete list of resources from the job.(LMS 00018)...............................................285
Error in setting enabled events. Please refer to the stack trace.(LMS 00019)......................285
Error in getting supported audit events. Please refer to the stack trace (LMS 00020)..........285
Error in getting enabled audit events. Please refer to the stack trace (LMS 00021)..............286
A general exception occured in LCM Application. Please refer to the stack trace for more
information.(LMS 00022).....................................................................................................286
Failed to Login to Source CMS as the User has been denied access to it by the
Administrator.(LMS 00023)..................................................................................................286
Failed to login to the Destination CMS because the user is denied access by the Administrator
(LMS 00024).......................................................................................................................286
The LCMbiar file location for importing the resources in either missing or invalid.(LMS 00025).287
The location to export resources to LCMBIAR file is either missing or invalid.(LMS 00026)..287
The selected job is either null or invalid. Please select a valid LCM job.(LMS 00027) ..........287
Failed to add resource to the version management tool (LMS 00101)..................................287
Failed to checkout the resource.(LMS 00103).....................................................................288
Failed to retrieve the revision history.(LMS 00104)..............................................................288
Failed to retrieve the revision from version management.(LMS 00105)................................288
Failed to retrieve the latest revision (LMS 00106)................................................................288
Failed to retrieve the workspace revision.(LMS 00107)........................................................288
Failed to retrieve the Version Management System. Please refer to the stack trace.(LMS
00108).................................................................................................................................289
Failed to get the repository version (LMS 00109)................................................................289
2010-11-0522
Contents
17.1.44
17.2
17.2.1
17.2.2
17.2.3
17.2.4
17.2.5
17.2.6
17.2.7
17.2.8
17.2.9
17.2.10
17.2.11
17.2.12
17.2.13
17.2.14
17.2.15
17.2.16
17.2.17
17.2.18
17.2.19
17.2.20
17.2.21
17.2.22
17.2.23
17.2.24
17.2.25
17.2.26
17.2.27
17.2.28
17.2.29
17.2.30
17.2.31
17.2.32
17.2.33
17.2.34
17.2.35
17.2.36
Error in clearing enabled audit events. Please refer to the stack trace.(VDS 00026) (LMS
0022)...................................................................................................................................289
Visual difference error messages.........................................................................................289
Login to SAP BusinessObjects Visual Difference Server failed. (VDS 00001).....................290
Log off from the BusinessObjects Visual Difference failed. (VDS 00002)............................290
Error in retrieving the list of CMS. (VDS 00003)..................................................................290
Login to CMS (source or destination) failed. (VDS 00004)..................................................290
Log off from CMS (source or destination) failed. (VDS 00005)............................................290
Error in scheduling the job (VDS 00006)..............................................................................291
A general exception occurred in Visual Difference Server. Refer to the stack trace for more
information. (VDS 00007)....................................................................................................291
Compare action failed.(VDS 00008).....................................................................................291
Failed to initialize the file " {0} ". (VDS 00009)......................................................................291
Failed to set the list of objects in the file " {0} ". (VDS 00010)..............................................292
Failed to create an infoobject with prog id = {0}. (VDS 00012).............................................292
Unable to retrieve the InfoObject with cuid = {0}. (VDS 00013)............................................292
Failed to create an infoobject with si_id = {0}.(VDS 00014)..................................................292
Failed to set the property {0} with the value {1}.(VDS 00015)...............................................292
Failed to retrieve the value of the property {0}.(VDS 00016)................................................293
Error in retrieving Audit Handler. Please refer to the stack trace.(VDS 00017).....................293
Error in adding audit events. Please refer to the stack trace.(VDS 00018)...........................293
Error in adding audit event detail. Please refer to the stack trace.(VDS 00019)....................293
Error in commiting audit event. Please refer to the stack trace.(VDS 00020).......................294
Error in setting enabled events. Please refer to the stack trace.(VDS 00021)......................294
Error in getting supported audit events. Please refer to the stack trace.(VDS 00022)..........294
Error in getting enabled audit events. Please refer to the stack trace.(VDS 00023)..............294
Error in validating audit event type. Please refer to the stack trace (VDS 00024).................295
Error in retrieving event objects. Please refer to the stack trace.(VDS 00025).....................295
Error in clearing enabled audit events. Please refer to the stack trace.(VDS 00026)............295
Error in generating the logon token. Please refer to the stack trace. (VDS 00027)...............295
Failed to login to the source CMS as the administrator has denied access to the user. (VDS
00028).................................................................................................................................296
Failed to login to the destination CMS as the administrator has denied access to the user. (VDS
00029).................................................................................................................................296
VisualDiff CMS is either null or not logged in.(VDC 00001).................................................296
UserName is either null or empty.(VDC 00002)...................................................................296
Password is either null or empty. (VDC 00003)....................................................................296
Authentication is either null or empty. (VDC 00004).............................................................297
Folder Name Already Exists.(VDC 00005)...........................................................................297
CMS is either null or not logged in. CMS could be either source or destination.(VDC 00007).297
Source CMS is either null or not logged in. (VDC 00008)....................................................297
Destination CMS is either null or not logged in.(VDC 00009)..............................................298
2010-11-0523
Contents
17.2.37
18.1
18.1.1
18.1.2
18.2
18.2.1
19.1
19.1.1
19.1.2
19.1.3
19.1.4
19.2
19.2.1
19.2.2
19.2.3
19.2.4
19.2.5
19.2.6
19.2.7
19.2.8
19.2.9
19.2.10
19.2.11
19.2.12
19.2.13
19.2.14
19.2.15
19.2.16
19.2.17
19.2.18
19.2.19
19.2.20
Error in parsing the Date as per the specified format.(VDC 00010)......................................298
List of Values Error Messages............................................................................................299Chapter 18
List of Values (LOV) Error Messages...................................................................................299
Too many selected values. (LOV0001).................................................................................299
You have not been authorized to use this universe. (LOV0002)...........................................299
List of Values (VAR) Error Messages...................................................................................300
Syntax error (VAR0001).......................................................................................................300
Live Office (LO) Errors........................................................................................................301Chapter 19
LO 01000 - LO 01999..........................................................................................................301
The application is not ready. Please try again later. (LO 01001)............................................301
An error occurred when refreshing. (LO 01003)...................................................................301
Failed to upgrade this document. (LO 01004).......................................................................302
To prevent data loss, Microsoft Excel cannot shift cells with content off of the worksheet. (LO
01005).................................................................................................................................302
LO 02000 - LO 02999..........................................................................................................302
Create session fail. Please check the web service connection. (LO 02001).........................303
An error occurred when connecting to the web service. (LO 02002)....................................303
An error occurred when connecting to the web service. (LO 02003)....................................303
An error occurred when connecting to the web service. (LO 02004)....................................303
An error occurred when connecting to the web service. (LO 02005)....................................304
An error occurred when opening the file. (LO 02006)...........................................................304
An error occurred when the file is saving. (LO 02007)..........................................................304
An error occurred when finding the Crystal Report properties. (LO 02008)..........................305
The server is not available. Please check the network connection and server status. (LO
02009).................................................................................................................................305
An error occurred while opening the report. The report does not exist; you have insufficient rights
to open the report; or you cannot make a connection to the BusinessObjects Web Service. (LO
02010).................................................................................................................................305
An error occurred while saving the report. The report does not exist, or you cannot make a
connection to the BusinessObjects Web Service. (LO 02011).............................................306
An error occurred while refreshing the report. (LO 02012)...................................................306
An error occurred when rowset data was inserted. (LO 02013)...........................................306
An error occurred when the report part was inserted. (LO 02014).......................................307
An error occurred when the page segment was inserted. (LO 02015)..................................307
An error occurred when the crosstab was inserted. (LO 02016)..........................................307
An error occurred in the Microsoft Office document. (LO 02017)........................................308
An error occurred in a query in BusinessObjects Enterprise. (LO 02018).............................308
An error occurred when connecting to the web service. (LO 02019)....................................308
An error occurred when connecting to the web service. (LO 02020)....................................308
2010-11-0524
Contents
19.2.21
19.2.22
19.2.23
19.2.24
19.2.25
19.2.26
19.2.27
19.2.28
19.2.29
19.2.30
19.2.31
19.2.32
19.2.33
19.2.34
19.2.35
19.2.36
19.2.37
19.2.38
19.2.39
19.2.40
19.2.41
19.2.42
19.2.43
19.3
19.3.1
19.3.2
19.3.3
19.3.4
19.3.5
19.3.6
19.3.7
19.3.8
19.3.9
19.3.10
Data source was not found. (LO 02021)..............................................................................309
Data source was not found. (LO 02022)..............................................................................309
Data source was not found. (LO 02023)..............................................................................309
Report's latest instance was not found. (LO 02024).............................................................309
An error occurred when the Report Part Viewer was initialized. (LO 02025).........................310
An error occurred when an object was selected in the Report Part Viewer. (LO 02026).......310
Please select a report part. (LO 02027)...............................................................................310
An error occurred when the Repository Explorer was initialized. (LO 02028)........................310
An error occurred from viewer control. (LO 02029)..............................................................311
An error occurred from parameter control. (LO 02030)........................................................311
An error occurred from the prompt dialog. (LO 02031)........................................................311
An error occurred from specify query panel. (LO 02032)......................................................312
An error occurred when browsing the field's values. (LO 02035)..........................................312
Live Office Object Properties dialog cannot be shown because there is no object in the current
document. (LO 02038).........................................................................................................312
The query specification in the Interactive Analysis document is invalid (LO 02039)...............312
An error occurred while logging on. (LO 02040)...................................................................313
Live Office is not installed properly. The definition of {0} is missing in AssemblyInfo.xml. (LO
02041).................................................................................................................................313
Live Office is not installed properly. An error occurred when reflecting the default constructor of
{0}. (LO 02042)....................................................................................................................313
Live Office is not installed properly. An error occurred when loading class {0}. (LO 02043)...314
An error occurred when the Insert Wizard is initialized. Please check the web service connection.
(LO 02044)..........................................................................................................................314
Failed to update parameter. (LO 02045)...............................................................................314
The entered parameter does not match the expected parameter type. (LO 02046)..............314
An instance corresponding to the Live Office object's report type cannot be found. (LO
02047).................................................................................................................................315
LO 26000 - LO 26999..........................................................................................................315
Live Office encountered an error. (LO 26000)......................................................................315
You do not have a valid license to use SAP BusinessObjects Live Office. Contact your SAP
BusinessObjects Enterprise system administrator. (LO 26003)............................................315
You may have connected to the wrong version of SAP BusinessObjects Web Services or the
Web Services deployment is corrupt. (LO 26002)................................................................316
SAP BusinessObjects Live Office Web Service encountered an error. (LO 26004).............316
Failed to parse XML. (LO 26005).........................................................................................316
Client XML version is newer than server XML version (LO 26006)......................................316
The connection to BusinessObjects Enterprise was lost. Try to log on again. (LO 26007).....317
The current refresh option requires saved data that does not exist. (LO 26008)...................317
The web server is out of memory. Contact your system administrator. (LO 26009).............317
The search service encountered a problem. The search operation is corrupt. (LO 26010).....317
2010-11-0525
Contents
19.3.11
19.3.12
19.3.13
19.3.14
19.3.15
19.3.16
19.3.17
19.3.18
19.3.19
19.3.20
19.3.21
19.3.22
19.3.23
19.3.24
19.3.25
19.3.26
19.3.27
19.3.28
19.3.29
19.3.30
19.3.31
19.3.32
19.3.33
19.3.34
19.3.35
19.3.36
19.3.37
19.3.38
19.3.39
19.3.40
19.3.41
19.3.42
19.4
19.4.1
Live Office has encountered a problem and cannot complete the requested action. (LO
26300).................................................................................................................................318
The current refresh option requires a report instance that does not exist. (LO 26301).........318
Report connection "{0}-{1}" does not exist. (LO 26302)........................................................318
Cannot connect to the Interactive Analysis Report Engine Web service (LO 26303)............318
Cannot connect to the Interactive Analysis Report Engine Web service (LO 26304)............319
Failed to load persisted view. (LO 26307)............................................................................319
Report part type has been changed from {0} to {1}. (LO 26310)...........................................319
Could not get the Query data (LO 26312)............................................................................319
Could not get the Interactive Analysis report part output data or the data is invalid (LO
26313).................................................................................................................................320
You do not have sufficient rights to refresh data from the specified report. (LO 26314).......320
Failed to get the document information. (LO 26315)............................................................320
Failed to get Live Office object. Online picture is not supported. (LO 26318).......................320
You do not have sufficient rights to fetch data from the specified report. (LO 26604)..........321
The Live Office view is corrupt. (LO 26605).........................................................................321
Refresh failure. View Refresh Options does not exist. (LO 26606).......................................321
You cannot access the Crystal Reports Server. Please check the Crystal Reports Server
connection. (LO 26607).......................................................................................................321
Cannot find the SAP BusinessObjects Enterprise object. (LO 26608)..................................322
Report connection does not exist. (LO 26610).....................................................................322
Failed to parse the parameter value "{0}" to "{1}" in the "{2}" locale. (LO 26611)...................322
Failed to get Crystal report. (LO 26612)...............................................................................322
The version of your Live Office Client does not match the version of the SAP BusinessObjects
Web Service. (LO 26613)....................................................................................................323
You cannot access the Crystal Reports Server. Please check the Crystal Reports Server
connection. (LO 26614).......................................................................................................323
Failed to render view. Report CUID, {0}, cannot be found. (LO 26615)................................323
Cell already existed. (LO 26616)..........................................................................................323
The value entered does not match the expected filter type. (LO 26617)...............................324
Failed to open report. (LO 26619)........................................................................................324
Failed to load persisted view. (LO 26620)............................................................................324
This type of Report Object is not supported. (LO 26621).....................................................324
Failed to refresh the specified report part. Please make sure the specified data context exists:
{0}. (LO 26626)....................................................................................................................325
Missing Part(s): (LO 26627).................................................................................................325
The current version does not support the SAP KeyDate feature. (LO 26630)......................325
Crystal Reports Java format is not supported. (LO 26631)..................................................325
LO 03000 - LO 03999..........................................................................................................326
Error Message Example (LO 03000)....................................................................................326
2010-11-0526
Contents
Metadata Bridges and Universe Builder (MDB) Error Messages.......................................327Chapter 20
20.1
21.1
21.1.1
21.1.2
21.1.3
21.1.4
21.1.5
21.1.6
21.1.7
21.1.8
21.1.9
21.1.10
21.1.11
21.1.12
21.1.13
21.1.14
21.1.15
21.1.16
21.1.17
21.1.18
21.1.19
21.1.20
21.1.21
21.1.22
21.1.23
21.1.24
21.1.25
21.1.26
21.1.27
21.1.28
21.1.29
This universe cannot be parsed.\nYou may need to review the universe design. (MDB
00001).................................................................................................................................327
SAP BusinessObjects Mobile (MOB) Error Messages.......................................................329Chapter 21
Mobile Server error messages.............................................................................................329
Invalid credentials: {0}. Ensure that your login information is correct. (MOB 00001).............329
{0} authentication could not log you on. Ensure that your login information is correct. (MOB
00002).................................................................................................................................330
Failed to open {0} document. (MOB 00005).........................................................................330
The document does not exist on the server. (MOB 00006)..................................................330
Unable to find the document. (MOB 00007).........................................................................330
You have specified an invalid document CUID. (MOB 00008)..............................................330
An internal server error occurred while creating the command. Contact your administrator. (MOB
00009).................................................................................................................................331
Failed to create a session from the information received from the client. (MOB 00010).......331
Prompts not found for the document. (MOB 00011)............................................................331
An internal server error occurred while getting the information from Central Management Server.
(MOB 00012).......................................................................................................................331
An internal server error occurred while processing the client request. (MOB 00014)...........332
An internal server error occurred while opening document. Could not find class {0} at server.
(MOB 00015).......................................................................................................................332
An internal error occurred. Could not find the - {0} service. (MOB 00018)............................332
An internal error occurred while creating {0} service. (MOB 00019).....................................332
An internal server error occurred while processing the client request. (MOB 00020)...........333
An internal server error occurred while processing the client request. (MOB 00021)...........333
An internal server error occurred while processing the client request. (MOB 00022)...........333
An internal server error occurred while processing the client request. (MOB 00023)...........333
You are not authorized to subscribe to document alerts. (MOB 00024)...............................334
You are not authorized to save documents to the local store of a device. You can subscribe to
alert without selecting the 'Save Local Copy' option. (MOB 00026).....................................334
You are not authorized to save documents to the local store of a device. (MOB 00027)......334
An internal server error occurred while performing a search. (MOB 00028).........................334
An internal server error occurred while processing the client request. (MOB 00029)...........335
Session has expired. Try logging in again. (MOB 00030)......................................................335
Session has expired. Try logging in again. (MOB 00031)......................................................335
Message push failed while confirming the received session data. (MOB 00050)..................335
An internal server error occurred while processing the client request. (MOB 00060)...........336
Unable to process the request. Could not find class {0} at server. (MOB 00070).................336
An internal server error occurred while processing the client request. (MOB 00080)...........336
2010-11-0527
Contents
21.1.30
21.1.31
21.1.32
21.1.33
21.1.34
21.1.35
21.1.36
21.1.37
21.2
21.2.1
21.2.2
21.2.3
21.2.4
21.2.5
21.2.6
21.2.7
21.2.8
21.2.9
21.2.10
21.2.11
21.2.12
21.2.13
21.2.14
21.2.15
21.2.16
21.3
21.3.1
21.3.2
21.3.3
21.3.4
21.3.5
21.3.6
21.3.7
21.3.8
21.3.9
21.3.10
21.3.11
21.3.12
21.3.13
An internal server error occurred while creating an instance for the class {0}. (MOB 00110).336
An internal server error occurred while processing the client request. (MOB 00130)...........337
An internal server error occurred. File {0} is not found or the file is corrupted at server. (MOB
00300).................................................................................................................................337
Session has expired. Re-login to open the document. (MOB 02003)...................................337
Prompt execution failed due to an invalid range of parameters. (MOB 02017)......................337
Cannot execute the requested action due to an invalid character in the URL {0}. (MOB
02090).................................................................................................................................338
Invalid prompt value. Enter the date in a proper format. (MOB 02100).................................338
Cannot execute the requested action due to an invalid syntax of <href> tag. (MOB 02120)..338
Mobile Server Configuration Tool error messages...............................................................338
Unexpected error ocurred while configuring the database. (MOB 20001)............................338
Unexpected error occurred while configuring the database. (MOB 20002)...........................339
Error occurred while updating the configuration files. (MOB 20003).....................................339
Failed to connect to the database as database driver {0} was not found. (MOB 20004).......339
Failed to connect to database. (MOB 20005).......................................................................339
Database schema is not extendable for use. (MOB 20006).................................................340
Unable to resolve the mobile server name or IP address. (MOB 20007)..............................340
Failed to connect to the mobile server. (MOB 20008)..........................................................340
Failed to load the settings from {0} file. (MOB 20009)..........................................................340
Failed to save settings to {0} file. (MOB 20010)...................................................................340
{0} properties file is not found. (MOB 20011).......................................................................341
Failed to restart the server. (MOB 20012)...........................................................................341
{0} service is not installed. (MOB 20013).............................................................................341
{0} service is not started. (MOB 20014)...............................................................................341
{0} service is not stopped. (MOB 20015).............................................................................342
Unable to restart the mobile servers. (MOB 20016).............................................................342
Mobile Client error messages..............................................................................................342
An internal error occurred. Could not find the {0} service. (MOB 10001)..............................342
Cannot load the image. Ensure the image is available. (MOB 10002)...................................342
Cannot load the {0} image. Ensure that the image is available. (MOB 10003).......................343
Cannot find the requested folder. (MOB 10004)..................................................................343
Unable to perform the requested action. (MOB 10005).......................................................343
Unable to open the local document. (MOB 10006)..............................................................343
You have abruptly canceled the operation which was in progress. (MOB 10007).................343
Invalid login credentials. Try logging with correct credentials. (MOB 10008).........................344
An error occurred during login. (MOB 10009)......................................................................344
Unable to find the report. (MOB 10010)...............................................................................344
Failed to renew the data connection. (MOB 10011).............................................................344
Unable to find the email account on device. (MOB 10012)...................................................345
Device platform does not support the requested action. (MOB 10013)................................345
2010-11-0528
Contents
21.3.14
21.3.15
21.3.16
21.3.17
21.3.18
21.3.19
21.3.20
21.3.21
21.3.22
21.3.23
21.3.24
21.3.25
21.3.26
21.3.27
21.3.28
21.3.29
21.3.30
21.3.31
21.3.32
21.3.33
21.3.34
21.3.35
21.3.36
21.3.37
21.3.38
21.3.39
21.3.40
21.3.41
21.3.42
21.3.43
21.3.44
21.3.45
21.3.46
21.3.47
21.3.48
21.3.49
21.3.50
21.3.51
21.3.52
21.3.53
21.3.54
Unable to initiate phone call. (MOB 10030)..........................................................................345
Unable to refresh the report due to an internal error. (MOB 10031).....................................345
Failed to exit the application due to an internal error. (MOB 10032).....................................345
Failed to lookup {0} document in the folder. (MOB 10033)...................................................346
Failed to lookup a folder in the requested folder. (MOB 10034)...........................................346
Failed to perform the requested action. (MOB 10035).........................................................346
You are not authorized to send documents as an email. (MOB 10037)................................346
An internal error occurred. Unable to send notifications. (MOB 10039)................................347
You are not authorized to log on to SAP BusinessObjects Mobile application. (MOB 10040).347
Client does not support the Screen : {0} (MOB 10042)........................................................347
The requested navigation direction is not supported. (MOB 10043).....................................347
Unable to retrieve the document instance information. (MOB 10044)..................................347
An internal error occurred while remote invocation of {0} class. (MOB 10045).....................348
An internal error occurred while opening the report. (MOB 10046)......................................348
An error occurred while opening the report. (MOB 10047)...................................................348
Unable to open the folder. (MOB 10048).............................................................................348
The action URL embedded in the document is not in the expected format. (MOB 10050).....349
Failed to perform the requested action. (MOB 10071).........................................................349
Unauthorized operation (MOB 10081).................................................................................349
An internal error occurred while reading the data from server. (MOB 10090).......................349
Cannot recover local store due to a network error. (MOB 10100)........................................349
The requested page of the report is not found on the server. (MOB 10110)........................350
An internal error occurred. Failed to initiate the application. (MOB 10120)...........................350
An error occurred while managing UI controls on the screen. (MOB 10130)........................350
Invalid credentials (MOB 10140)..........................................................................................350
An internal error occurred. (MOB 10150).............................................................................351
An error occurred during data synchronization. (MOB 10160)..............................................351
Login failed. Try to re-login. (MOB 10170)...........................................................................351
Cannot delete the document, as the synchronization process is in progress. (MOB 10180).351
An internal error occurred while opening the report. (MOB 10190)......................................351
Failed to send the SMS due to an internal error. (MOB 10200)............................................352
The requested action is not supported. (MOB 10210)..........................................................352
Failed to start the application. (MOB 10220)........................................................................352
Login failed. Unable to connect to the Mobile server. (MOB 10230)....................................352
Unable to retrieve information from the server as you are in the offline mode. (MOB 10300).353
Unable to connect to the Mobile server. (MOB 10400)........................................................353
An error occurred while managing the UI controls on the screen. (MOB 10500)..................353
Input is not selected. Request is cancelled. (MOB 10600)...................................................353
An internal error occurred while performing the requested action. (MOB 10700).................354
Session has expired. Try logging in again. (MOB 10800)......................................................354
The requested operation is not supported. (MOB 10900)....................................................354
2010-11-0529
Contents
Query technique errors.......................................................................................................355Chapter 22
22.1
22.2
22.3
22.4
22.5
22.6
22.7
23.1
23.2
23.3
23.4
23.5
23.6
23.7
23.8
23.9
23.10
23.11
23.12
Unexpected enumerated type {0}. (QTJ 00501)...................................................................355
Nested @aggregate_aware functions are not supported (QTJ 00510)..................................355
Circular references : check your @select and @where calls (QTJ 00511).............................355
Bad @Select reference. Check the definition of the @Select declaration (QTJ 00512).........356
Bad @Where reference. Check the definition of the @Where declaration (QTJ 00513)........356
Bad @Prompt reference. Check the validity of the @Prompt declaration. Try using the @Prompt
editor (QTJ 00514)..............................................................................................................356
Bad hierarchy reference (QTJ 00515)..................................................................................356
Query as a Web Service (QWS) Error Messages...............................................................357Chapter 23
Unable to locate help file:\n{0} (QWS 00001)......................................................................357
Server name and certificate name does not match (QWS 00002)........................................357
HTTPS Certificate Issuer is not trusted (QWS 00003).........................................................357
The Web Service URL you provided has not been updated. (QWS 00004)..........................358
Invalid query specification of XML contents (QWS 00005)...................................................358
Unrecognized data type in result object: {0} (QWS 00006)...................................................358
You must be logged on to the server (QWS 00007)............................................................358
The proxy to the report engine web service is not available. The attempted calls to the web
service have not been successful. (QWS 00008).................................................................359
Problem during prompt selection (QWS 00009)...................................................................359
Problem during context selection (QWS 00010)..................................................................359
Impossible to load the list of data sources (QWS 00011).....................................................359
You are not authorized to design or edit a query.\r\nPlease contact your administrator. (QWS
02718).................................................................................................................................360
24.1
24.1.1
24.1.2
24.1.3
24.1.4
24.1.5
24.1.6
24.1.7
24.1.8
24.1.9
24.1.10
24.1.11
Explorer (PS) Error Messages.............................................................................................361Chapter 24
PS 10001 - PS 15010..........................................................................................................361
The system cannot log you on. (PS 10001)..........................................................................361
The system cannot log you on due to an invalid token. (PS 10002)......................................361
The system cannot not log you on due to missing logon credentials. (PS 10003).................362
The Explorer web application was not able to retrieve an Explorer service from the received web
client request. (PS 10004)...................................................................................................362
Your user profile does not allow you to perform that request. (PS 10005)...........................362
Explorer was not able to retrieve a service. (PS 10006).......................................................362
Explorer was not able to initialize the service locator. (PS 10007)........................................363
Explorer was not able to retrieve its configuration. (PS 10008).............................................363
An error occurred during logon. (PS 15002).........................................................................363
The string property '{0}' is missing in the SSO configuration file. (PS 15003).......................363
The boolean property '{0}' is missing in the SSO configuration file. (PS 15004)....................363
2010-11-0530
Contents
24.1.12
24.1.13
24.2
24.2.1
24.2.2
24.2.3
24.2.4
24.2.5
24.2.6
24.2.7
24.2.8
24.2.9
24.2.10
24.2.11
24.2.12
24.2.13
24.3
24.3.1
24.3.2
24.3.3
24.3.4
24.3.5
24.3.6
24.3.7
24.3.8
24.3.9
24.3.10
24.3.11
24.3.12
24.3.13
24.3.14
24.3.15
24.3.16
24.3.17
24.4
The list property '{0}' is missing in the SSO configuration file. (PS 15005)............................364
No credential can be found to log you on. (PS 15006).........................................................364
PS 20000 - PS 20015..........................................................................................................364
The data source file was not found. (PS 20001)...................................................................364
An error occurred while reading the Universe. (PS 20002)...................................................364
There was an error while retrieving the Universes from the CMS (Central Management Server).
(PS 20003)..........................................................................................................................365
The Information Space was not found. (PS 20004)...............................................................365
It is not possible to read the Information Space properties. (PS 20005)...............................365
It is not possible to retrieve the Information Spaces and display them in the Home tab. (PS
20006).................................................................................................................................365
It is not possible to start indexing. (PS 20007).....................................................................366
It is not possible to acquire a lock on the requested resource. (PS 20008)..........................366
It is not possible to release the lock on the requested resource. (PS 20009).......................366
A server error occurred during logoff. (PS 20010)................................................................366
An error occurred on the server while scheduling an indexing task. (PS 20011)...................367
An error occurred on the server while retrieving the user profile. (PS 20012).......................367
A server error occurred while canceling an indexing task. (PS 20013)..................................367
PS 30000 - PS 30020..........................................................................................................367
The Information Space Name must not be empty. (PS 30001).............................................367
An Information Space with the same Name already exists. (PS 30002)................................368
Unable to access the repository. (PS 30003).......................................................................368
It is not possible to create an Information Space without a dimension or a measure. (PS
30004).................................................................................................................................368
Password confirmation of the Information Space scheduling failed. (PS 30005)...................368
While testing the objects, the query returns more than one record set. (PS 30006).............369
While testing the objects the query has generated a Web Intelligence Report Engine exception.
(PS 30007)..........................................................................................................................369
A problem occurred while retrieving the public and favorite CMS (Central Management Server)
folders. (PS 30008)..............................................................................................................369
A problem occurred while retrieving the Information Space list. (PS 30009).........................369
A problem occurred while retrieving the Information Space scheduling details. (PS 30010)...370
You do not have sufficient rights to save an Information Space under the specified folder. (PS
30011).................................................................................................................................370
It is not possible to use the following objects, prompts are not supported. (PS 30012)........370
A context must be selected before continuing. (PS 30013)..................................................370
You do not have sufficient rights to delete an Information Space in the specified folder. (PS
30015).................................................................................................................................371
You do not have sufficient rights to delete this Information Space. (PS 30016)....................371
It is not possible to use this spreadsheet. (PS 30017)..........................................................371
It is not possible to use this spreadsheet as it has no dimensions. (PS 30019)....................371
PS 40000 - PS 40010..........................................................................................................372
2010-11-0531
Contents
24.4.1
24.4.2
24.5
24.5.1
24.5.2
24.5.3
24.5.4
24.5.5
24.5.6
24.5.7
24.5.8
24.5.9
24.5.10
24.5.11
24.5.12
24.5.13
24.5.14
24.5.15
24.5.16
24.5.17
24.5.18
24.5.19
24.5.20
24.5.21
24.5.22
24.5.23
24.5.24
24.5.25
24.5.26
24.5.27
24.5.28
24.5.29
24.5.30
24.5.31
24.5.32
24.5.33
24.5.34
24.5.35
The search failed. (PS 40001)..............................................................................................372
Unable to execute the search, there are too many matching results. (PS 40003).................372
PS 50000 - PS 50310..........................................................................................................372
It is not possible to retrieve more values. (PS 50001)..........................................................373
It is not possible to generate the chart. (PS 50002).............................................................373
It is not possible to retrieve the measures list. (PS 50003)...................................................373
It is not possible to retrieve the facets within the Explore tab. (PS 50004)...........................373
It is not possible to retrieve the data table values. (PS 50005).............................................373
It is not possible to begin exploration of the Information Space. (PS 50006)........................374
It is not possible to load the latest version of the Information Space navigation index. (PS
50007).................................................................................................................................374
It is not possible to stop exploration of the Information Space. (PS 50008)..........................374
Unable to execute the search, there are too many matching results. (PS 50009).................374
Unable to execute the search, there are too many matching results. (PS 50010).................375
Unable to start exploring that Information Space since it does not contain any data. (PS
50011).................................................................................................................................375
Server error occurred while trying to perform an export request. (PS 50100).......................375
Server error occurred while trying to retrieve an export result. (PS 50101)..........................375
Server error occurred while trying to cancel an export task: no task identifier provided in request.
(PS 50102)..........................................................................................................................376
The export format is not recognized by the server. (PS 50103)............................................376
The destination in the export request is not recognized by the server. (PS 50104)...............376
The export format and the destination specified are not compatible. (PS 50105)..................376
A server error occurred while interacting with the data provider. (PS 50106).......................377
Some data received by the export engine is either illegal or not supported, or the request does
not follow expected syntax. (PS 50107)...............................................................................377
A server error occurred while interacting with the data provider. (PS 50108).......................377
The current data set is too large for this export. (PS 50109)................................................377
Server error occurred while processing the prompt input. (PS 50200).................................378
Server error occurred while analyzing the prompt. (PS 50201).............................................378
Server error occurred while submitting the prompt inputs. (PS 50202).................................378
Some prompt inputs are missing. (PS 50203)......................................................................378
A prompt input is invalid. (PS 50204)...................................................................................378
Server error occurred while saving the prompt inputs. (PS 50205).......................................379
The selected objects are not compatible. (PS 50206)..........................................................379
Failed to load the Information Space. (PS 50300).................................................................379
Failed to load the Information Space index. (PS 50301).......................................................379
Failed to initialize the data provider session. (PS 50302)......................................................380
The Information Space is based on a data source that does not exist. (PS 50303)...............380
The Information Space doesn't contain any facets. (PS 50304)............................................380
The Information Space doesn't contain any data. (PS 50305)...............................................380
Failed to apply the object level security. (PS 50306)............................................................381
2010-11-0532
Contents
24.5.36
24.5.37
24.6
24.6.1
24.6.2
24.6.3
24.6.4
24.6.5
24.6.6
24.6.7
24.6.8
24.6.9
25.1
25.2
25.3
25.4
25.5
25.6
25.7
25.8
25.9
25.10
25.11
25.12
25.13
25.14
25.15
25.16
25.17
25.18
25.19
25.20
25.21
Failed to apply the personalization settings. (PS 50307).......................................................381
A request to the underlying data access layer failed. (PS 50308).........................................381
PS 60000 - PS 60310..........................................................................................................381
The method called is not supported for this endpoint. (PS 60001)........................................381
The method called requires a token. (PS 60002)..................................................................382
The web application encountered an error while parsing the response.. (PS 60003).............382
The endpoint called does not exist. (PS 60004)...................................................................382
The request has caused a parsing issue. (PS 60101)...........................................................382
There are missing parameters within the request. (PS 60102)..............................................383
The request is incorrectly formed. (PS 60103).....................................................................383
Error while creating or updating the information space datachunk. (PS 60201).....................383
Error during Openspace. The indexing of the Information Space failed. (PS 60301)..............383
Report Conversion Tool (RCT) Error Messages..................................................................385Chapter 25
Unknown error (RCT 00001)................................................................................................385
user canceled the conversion (RCT 00011)..........................................................................385
An error occurred while trying to start the conversion server. (RCT 00013).........................385
Publish failed (RCT 00014)...................................................................................................386
The Source server is not found or the server may be down. (RCT 00016)...........................386
The Destination server is not found or the server may be down. (RCT 00017).....................386
Source User name is invalid. (RCT 00018)...........................................................................386
Destination User name is invalid. (RCT 00019)....................................................................387
Source Password is invalid. (RCT 00020)............................................................................387
Destination Password is invalid. (RCT 00021)......................................................................387
Incorrect login or password or port at Source. (RCT 00022)................................................387
Incorrect login or password or port at Destination. (RCT 00023)..........................................387
Invalid Source (RCT 00024).................................................................................................388
Invalid Destination (RCT 00025)...........................................................................................388
Choose a connection to continue with audit or deselect the checkbox. (RCT 00026)...........388
Unable to open file from (RCT 00027)..................................................................................388
File not found. Verify the file name. (RCT 00028).................................................................389
Invalid file name. (RCT 00029).............................................................................................389
Invalid roc file. Please select a valid roc file. (RCT 00030)....................................................389
Invalid file. (File corrupted?) Please select a valid roc file. (RCT 00031)................................389
Invalid File name. (RCT 00032).............................................................................................390
26.1
26.1.1
26.1.2
Translation tool error messages (TMT and UTM)................................................................391Chapter 26
Translation management tool (TMT) Errors...........................................................................391
Object type is not translatable (TMT10000).........................................................................391
No translation plugin is defined for the type "{0}" (TMT10010)..............................................391
2010-11-0533
Contents
26.1.3
26.1.4
26.1.5
26.1.6
26.1.7
26.1.8
26.2
26.2.1
26.2.2
26.2.3
26.2.4
26.2.5
26.2.6
26.2.7
26.2.8
Cannot load the translation plugin for the type "{0}" (TMT10020)..........................................392
"{0}" is a read-only object (TMT10030).................................................................................392
Unexpected I/O exception (TMT10040)...............................................................................392
You do not have rights to translate "{0}" (TMT10050)...........................................................392
Invalid User Rights (TMT 20050)..........................................................................................392
You are not authorized to use this document.\n\nThe document belongs to another CMS. You
cannot open it unless you are connected to the same CMS from which it was imported. (TMT
20070).................................................................................................................................393
Translation management tool (UTM) Errors .........................................................................393
Invalid PropertyInfo: {0}\nThe label 'PropertyInfo' should not be null (UTM 20001)...............393
Invalid Locale: Locale is null (UTM 20010)............................................................................393
Invalid Root: Root entity is null (UTM 20020).......................................................................394
Invalid Document: Document is null (UTM 20030)................................................................394
Invalid EntityInfo: EntityInfo is null (UTM 20040)...................................................................394
Invalid User Rights (UTM 20050).........................................................................................394
Invalid Document version:\nThis document might have been generated by an old version of
Universe Designer.\nMigrate the universe by opening and saving it using XI 3.0 or XI 3.1 Designer.
(UTM 20060).......................................................................................................................395
You are not authorized to use this document.\n\nThe document belongs to another CMS. You
cannot open it unless you are connected to the same CMS from which it was imported. (UTM
20070).................................................................................................................................395
27.1
27.1.1
27.1.2
27.1.3
27.1.4
27.1.5
27.1.6
27.1.7
27.1.8
27.1.9
27.1.10
27.1.11
27.1.12
27.1.13
27.1.14
27.1.15
27.1.16
27.2
27.2.1
Universe Error Messages....................................................................................................397Chapter 27
Universe Management (UNM) Error Messages....................................................................397
May be inconsistent. (UNM0001)........................................................................................397
Bad number format (UNM0002)...........................................................................................398
Missing quote ""..."" (UNM0003)..........................................................................................398
Missing double quote ""..."" (UNM0004)..............................................................................398
Missing closing bracket {...} (UNM0005)..............................................................................398
Missing opening parenthesis after function name (UNM0006).............................................398
Missing closing parenthesis (UNM0007)..............................................................................399
Missing parameters (UNM0008)..........................................................................................399
Wrong number of parameters (UNM0009)...........................................................................399
Bad character (UNM0010)...................................................................................................399
Bad indent (UNM0011)........................................................................................................400
Incompatible operand (UNM0012).......................................................................................400
Looping in variable definition (UNM0013).............................................................................400
Returns type incompatible with the user object type. (UNM0014)........................................400
Syntax error (UNM0015).....................................................................................................401
Cannot create two user objects with the same name. (UNM0016)......................................401
Universe (UNV) Error Messages..........................................................................................401
The server is not responding. (UNV0017)............................................................................401
2010-11-0534
Contents
27.2.2
27.2.3
27.2.4
27.2.5
27.2.6
28.1
28.1.1
28.2
28.2.1
28.2.2
28.2.3
28.2.4
28.3
28.3.1
28.3.2
28.3.3
28.3.4
28.3.5
28.3.6
28.4
28.4.1
28.4.2
28.4.3
28.4.4
The server is not responding (UNV0018).............................................................................402
This alias name is used for a table. (UNV0031)....................................................................402
Associated table does not exist. (UNV0032).......................................................................402
This object already exists. (UNV0035).................................................................................402
Strategy connection not found. (UNV0049).........................................................................403
Upgrade management tool (UMT) Error Messages.............................................................405Chapter 28
UMT 00001.........................................................................................................................405
The new language you have selected will not take effect until you have restarted upgrade
management tool. (UMT 00001)..........................................................................................405
UMT 00301-00304..............................................................................................................405
As part of the upgrade process for this object, another object, titled "{0}", of kind "{1}", has been
created. (UMT 00301)..........................................................................................................406
This object is created as part of the upgrade process for another object titled "{0}", of kind "{1}".
(UMT 00302).......................................................................................................................406
This object will not be committed during the upgrade. This behavior is by design, and is not an
error. (UMT 00303)..............................................................................................................406
As part of the upgrade process for this object, another object, titled "{0}", of kind "{1}", has been
excluded from being committed. This is not an error. (UMT 00304).....................................406
UMT 10001-10006..............................................................................................................407
You must be an administrator in order to change parameters. (UMT 10001)........................407
A warning occured. No further details are available. (UMT 10002).......................................407
File not found. Please verify that the correct file name was given. (UMT 10003)..................407
This object is excluded from being committed. This is part of the upgrade process, and is not an
error. (UMT 10004)..............................................................................................................407
This object is excluded from being committed as part of the upgrade process for another object
titled "{0}", of kind "{1}". This is not an error. (UMT 10005)...................................................408
For users and groups mapped in via third-party authentication, the name (not the CUID) is used
to detect whether the user or group already exists at the destination. (UMT 10006)............408
UMT 10101-10105..............................................................................................................408
You have logged on to the source CMS as a user that is not a system administrator. You will
not be able to export objects which you have no access to. It is recommended that you run the
upgrade management tool as the system administrator. (UMT 10101).................................408
You have logged on to the destination CMS as a user that is not a system administrator. Certain
objects may fail to commit due to security rights. (UMT 10102)...........................................409
You have logged on to both the source and the destination CMSes as users that are not system
administrators. You will not be able to export or commit objects which you have no access to.
It is recommended that you run the upgrade management tool as the system administrator. (UMT
10103).................................................................................................................................409
You have logged on to the source XI Release 2 CMS as a user that is not the system
administrator. You will not be able to export objects which you have no access to. Also, users'
passwords will not be exported. It is recommended that you run the upgrade management tool
as the system administrator. (UMT 10104)..........................................................................409
2010-11-0535
Contents
28.4.5
28.5
28.5.1
28.5.2
28.5.3
28.5.4
28.5.5
28.5.6
28.5.7
28.5.8
28.5.9
28.5.10
28.5.11
28.5.12
28.5.13
28.5.14
28.5.15
28.5.16
28.6
28.6.1
28.6.2
28.6.3
28.6.4
28.6.5
28.6.6
28.6.7
You have logged on to both the source and the destination CMSes as users that are not system
administrators. You will not be able to export or commit objects which you have no access to.
Also, users' passwords will not be exported. It is recommended that you run the upgrade
management tool as the system administrator. (UMT 10105)..............................................410
UMT 20001-20016..............................................................................................................410
Object ID not recognized: {0} (UMT 20001).........................................................................410
An error has occurred. No further details are available. (UMT 20002)..................................410
Failed to apply upgrade management tool application plugin changes. The error is: {0} (UMT
20003).................................................................................................................................411
An unexpected error has occurred. (UMT 20004)................................................................411
An unexpected error of type "{0}" has occurred. (UMT 20005).............................................411
Unable to retrieve the object with CUID "{0}" from object manager. (UMT 20006)...............411
Unable to retrieve the CUID of "{0}". The error is: {1} (UMT 20007).....................................412
Insufficient right to retrieve the upgrade management tool application object. Please log on with
a user who has View right on the upgrade management tool application object. (UMT 20008).412
Internal inconsistencies detected among upgrade management tool collaterals. Object: "{0}",
property: "{1}", unexpected value: "{2}". (UMT 20009)..........................................................412
Internal inconsistencies detected among plugins associated with upgrade management tool. The
prompt name "{0}" is used by at least plugins "{1}" and "{2}". (UMT 20010)...........................412
Internal inconsistencies detected among plugins associated with upgrade management tool. The
prompt name "{0}" from plugin "{1}" contains one or more invalid characters. (UMT 20011)...413
Version check failed. The source system or source BIAR file must be of an older version. The
destination system must be of the current version. (UMT 20012)........................................413
Version check failed. Source system must be of the current version. (UMT 20013).............413
Version check failed. The source system's version must be XI Release 2 or later. (UMT
20014).................................................................................................................................413
Failed to open Help in browser. (UMT 20015)......................................................................414
Upgrade management tool is currently not configured to work with WinAD. Please refer to the
Upgrade Guide on how to properly set up WinAD authentication. (UMT 20016)..................414
UMT 20106-20112..............................................................................................................414
To perform Complete Upgrade, you have to log on to the source CMS as a system administrator.
(UMT 20106).......................................................................................................................414
To perform a Complete Upgrade, you have to log onto the destination CMS as a system
administrator. (UMT 20107).................................................................................................415
To perform Complete Upgrade, you must log on to the source XI Release 2 CMS as the system
administrator. (UMT 20108).................................................................................................415
None of your source Input File Repository Servers are available. Please check your source
system, and ensure the FRS servers are running. (UMT 20109)..........................................415
None of your source Output File Repository Servers are available. Please check your source
system, and ensure the FRS servers are running. (UMT 20110)..........................................415
None of your destination Input File Repository Servers are available. Please check your destination
system, and ensure the FRS servers are running. (UMT 20111)..........................................416
None of your destination Output File Repository Servers are available. Please check your
destination system, and ensure the FRS servers are running. (UMT 20112)........................416
2010-11-0536
Contents
28.7
28.7.1
28.7.2
28.7.3
28.7.4
28.7.5
28.7.6
28.7.7
28.7.8
28.7.9
28.7.10
28.7.11
28.7.12
28.7.13
28.7.14
28.7.15
UMT 20201-20215..............................................................................................................416
Invalid upgrade mode detected. Refer to the documentation for a list of acceptable modes. (UMT
20201).................................................................................................................................416
Source system name cannot be empty. (UMT 20202).........................................................416
Source system user name cannot be empty. (UMT 20203)..................................................417
Source system authentication cannot be empty. (UMT 20204)............................................417
Destination CMS name cannot be empty. (UMT 20205)......................................................417
Destination user name cannot be empty. (UMT 20206).......................................................417
Destination authentication type cannot be empty. (UMT 20207)..........................................418
BIAR file path cannot be empty. (UMT 20208).....................................................................418
Cannot find the directory specified in the BIAR file path. Please verify the path. (UMT 20209).418
The BIAR file path is invalid. Please verify the path. (UMT 20210)........................................418
Cannot find the specified BIAR file. Please check the file path. (UMT 20211)......................418
Log file path cannot be empty. (UMT 20212).......................................................................419
The log file path is invalid. Please verify the path. (UMT 20213)...........................................419
The prompt "{0}" is invalid. Please refer to the documentation for a list of acceptable prompts.
(UMT 20214).......................................................................................................................419
Cannot find the directory specified in log file path. Please verify the path. (UMT 20215)......419
Advanced Analysis, Web edition Errors..............................................................................421Chapter 29
29.1
29.1.1
29.1.2
29.1.3
29.1.4
29.1.5
29.1.6
29.1.7
29.1.8
29.1.9
29.1.10
29.1.11
VYC 00000 - 09999.............................................................................................................421
There was a problem replacing the original workspace. Try again or use Save As.
(VYC00001).........................................................................................................................421
An unknown error has occurred while saving the workspace. The workspace could not be saved.
(VYC00002).........................................................................................................................421
Your request could not be completed because your session was disconnected. Log on again to
retry. (VYC00003)...............................................................................................................422
Advanced Analysis could not open the workspace. The workspace has been corrupted. Please
contact your Administrator. (VYC00005).............................................................................422
Advanced Analysis could not find the requested workspace. It may have been deleted.
(VYC00006).........................................................................................................................422
An error occurred while restoring the workspace. Please contact your administrator.
(VYC00007).........................................................................................................................422
Advanced Analysis could not save the workspace. The name is missing. Please enter a valid
name and try again. (VYC00008).........................................................................................423
Advanced Analysis could not save the workspace. The workspace folder is missing. Select a
valid folder and try again. (VYC00009).................................................................................423
You do not have permission to save to this folder. Contact your administrator if you need this
permission enabled. (VYC00011).........................................................................................423
An error occurred while trying to retrieve connections from the Enterprise server. Contact an
administrator to verify that the server is running. (VYC00012).............................................423
An error occurred while trying to retrieve connections. Not all connections were available. If the
problem persists, contact your administrator. (VYC00013)..................................................424
2010-11-0537
Contents
29.1.12
29.1.13
29.1.14
29.1.15
29.1.16
29.1.17
29.1.18
29.1.19
29.1.20
29.1.21
29.1.22
You do not have permission to perform the requested action. If you require assistance, please
contact your system administrator. (VYC00018)..................................................................424
Either no connections have been defined in the Central Management Console, or you have not
been granted rights to view any existing connections. Please contact your administrator for more
information. (VYC00020).....................................................................................................424
Advanced Analysis was unable to complete the last action. Please try again. If this problem
persists, contact your administrator. (VYC00021)................................................................425
Advanced Analysis was unable to remove "{0}". The analysis has lost its connection.
(VYC00022).........................................................................................................................425
An error has occurred while fetching the report parameters. Try the operation again. If the problem
persists, please contact your administrator. (VYC00023).....................................................425
The requested operation was not completed successfully because the MDAS service cannot be
reached. Try the operation again. If the problem persists, please contact your administrator.
(VYC00040).........................................................................................................................425
The MDAS service encountered an error. (VYC00041).......................................................426
Advanced Analysis was unable to open a connection. (VYC00044).....................................426
The requested operation could not be completed because it puts the query into an invalid state.
(VYC00045).........................................................................................................................426
The requested operation could not be completed due to a hierarchy conflict. (VYC00046)...426
The requested operation could not be completed because the query is too large.
(VYC00047).........................................................................................................................427
30.1
30.1.1
30.1.2
30.1.3
30.1.4
30.1.5
30.1.6
30.1.7
30.1.8
30.1.9
30.1.10
Interactive Analysis Error Messages...................................................................................429Chapter 30
Interactive Analysis (WIJ) Error Messages...........................................................................429
You need to use the Formula Editor to create a formula. (Error: WIJ 10000) .......................429
You cannot create a variable that has the same name as an existing document object. Give the
new variable a different name. (Error: WIJ 10001)................................................................430
You cannot position this report component in relation to a block, cell, or section that is positioned
relative to this report component. Select a different block, cell or section in the dropdown list or
unselect the Relative To option. (WIJ 10500).......................................................................430
Interactive Analysis requires the Java Runtime Environment (JRE) 1.4.2_01. The currently installed
JRE is {0}. Contact your administrator to upgrade to 1.4.2_01 or select the [default VM] entry
in the [Java Plug-in Control Panel], if you already have the required version installed. (WIJ
11111).................................................................................................................................430
An error occurred while the document was being decoded. Try to open the document in the BI
Launch Pad, or contact your administrator for further information. ( WIJ 20000)..................431
An unexpected problem occurred when during document refresh and open. The data source has
been modified or deleted, or a prompt on the document has no value selected. (WIJ 20001).431
Unexpected error. If you cannot reconnect to the server, close your intefactive analysis session
and start again. (WIJ 20002)................................................................................................431
Unable to get the first page of the current report.\nPlease check the validity of your report or
contact our admministrator. (ERR WIJ 20003).....................................................................432
The current query contains unresolvable objects. The query will be updated (WIJ 20004).....432
The current request has returned corrupted data. Contact your administrator for further information
( WIJ 20005)........................................................................................................................432
2010-11-0538
Contents
30.1.11
30.1.12
30.1.13
30.1.14
30.1.15
30.1.16
30.1.17
30.1.18
30.1.19
30.1.20
30.1.21
30.1.22
30.1.23
30.1.24
30.2
30.2.1
30.2.2
30.2.3
30.2.4
30.3
30.3.1
30.3.2
30.3.3
30.3.4
30.3.5
30.3.6
30.3.7
30.3.8
Unable to contact the application server. Contact your administrator for further information (WIJ
20010).................................................................................................................................433
The {0,number} MB report element you want to copy is too large to be exported to an external
application.\nThe maximum allowed size is {1,number} MB. (Error: WIJ 30004)...................433
Your user profile does not give you access to a document domain to save corporate documents.
Save this document as a personal document or contact your Business Objects administrator
(ERR WIJ 40000).................................................................................................................433
The query in this document is empty. Check that the Result Objects pane on the query tab
includes objects before running the query (ERR WIJ 30000)................................................433
At least one query in this document is empty. Check that the Result Objects pane on each query
tab includes objects before running the queries (ERR WIJ 30001).......................................434
Out of memory. Reduce the browser window size or re-launch the report panel. (WIJ 30003)..434
Your user profile does not allow you to save personal or corporate documents. Contact your
administrator for further details. (WIJ 40001).......................................................................434
Your version of Interactive Analysis Desktop is not up-to-date to connect to this system <a
href="{0}">(ERR WIJ 50003)</a>.You must upgrade your Web Intelligence Rich Client by clicking
<a href="{1}">here</a>........................................................................................................434
The information sent to the server contains invalid character(s). Use the Undo button to cancel
the latest changes to the document and then retry. (Error: WIJ 55555)................................435
The session timed out. The document {document_name}.wid has been autosaved in the
Favorites\~InteractiveAnalysis folder. Click Restore to retrieve it. (WIJ 60001)...................435
The session timed out, but the document could not be autosaved because the following security
rights are not assigned (WIJ 60002): {list_of_rights}.............................................................436
The document cannot be retrieved due to a server problem (WIJ 77777).............................436
The Central Management System is not functioning. Contact your administrator for further
information. (WIJ 77779)......................................................................................................436
Your session timed out. Please close the Java interface and log on again. (WIJ 77778)......436
Interactive Analysis Desktop (WIO) Error Messages............................................................437
Interactive Analysis Desktop cannot log in. (WIO 00001) ....................................................437
Cannot open the hyperlink (WIO 00002)..............................................................................437
There is no more memory available. (WIS 30280) (WIO 30280)...........................................438
Cannot continue because memory is low. Please close documents to free memory. (WIO
30284).................................................................................................................................438
Interactive Analysis Server (WIS) Error Messages...............................................................438
The query in this document is empty. (WIS 30000) .............................................................438
At least one query in the document is empty. (WIS 30001) .................................................439
Your security profile does not include permission to edit queries. (WIS 30251) ...................439
Your security profile does not include permission to edit documents. (WIS 30252) .............439
Your security profile does not include permission to refresh documents. (WIS 30253) .......439
Your security profile does not include permission to refresh lists of values. (WIS 30254) .....440
Your security profile does not include permission to use lists of values. (WIS 30255) .........440
Your security profile does not include permission to view the script generated by the query. (WIS
30256) ................................................................................................................................440
2010-11-0539
Contents
30.3.9
30.3.10
30.3.11
30.3.12
30.3.13
30.3.14
30.3.15
30.3.16
30.3.17
30.3.18
30.3.19
30.3.20
30.3.21
30.3.22
30.3.23
30.3.24
30.3.25
30.3.26
30.3.27
30.3.28
30.3.29
30.3.30
30.3.31
30.3.32
30.3.33
30.3.34
30.4
30.4.1
Your security profile does not include permission to use the formula language. (WIS 30257)
............................................................................................................................................440
Your security profile does not include permission to perform drill analysis. (WIS 30258) .....441
Your security profile does not include permission to extend the scope of analysis. (WIS 30259)
............................................................................................................................................441
An internal error occurred while calling the {api_name} API. (WIS 30270) ............................441
The document is too large to be processed by the server. (WIS 30271) .............................441
The document is too large to be processed by the server. (WIS 30272) .............................442
The query or report could not be generated.(WIS 30351) ...................................................442
A query with this name already exists. (WIS 30371) ............................................................442
There is no more memory available. (WIS 30280)................................................................442
The Interactive Analysis server is busy. Please save any changes and try again later. If the problem
persists, contact your administrator. (WIS 30284)...............................................................443
There is no more memory available. (WIS 30280) (WIS 30285)...........................................443
You cannot edit this document, because the query property option "Allow other users to edit the
query" was not enabled when the document was created. (WIS 30381) ..............................443
An internal error has been generated by the WIQT. (WIS 30551) ........................................443
Your WIQT session has reached timeout. Log out and log in again to the BI launch pad. (WIS
30553) ................................................................................................................................444
No more WIQT servers are available. The maximum number of concurrent users is already logged
in. (WIS 30554) ...................................................................................................................444
Your security profile does not include permission to save documents as corporate documents
or to send documents using the BI launch pad. (WIS 30555) ..............................................444
A corporate document with this name already exists. Your security profile does not include
permission to delete corporate documents created by other users. (WIS 30556) ...............445
There is no document with this name in the repository. Specify a different document name. (WIS
30557) ................................................................................................................................445
Cannot perform the intended action on this document. (WIS 30650) ..................................445
The server failed to load the XML document. (WIS 30751) .................................................446
The XML file for this document cannot be opened. Contact your BusinessObjects administrator.
(WIS 30752) .......................................................................................................................446
An error occurred while parsing the XML document. Contact your administrator. (WIS 30753)
............................................................................................................................................446
The Web Intelligence 2.x document could not be migrated. (WIS 30761) ............................447
This document cannot be migrated. The query and report of the original Web Intelligence 2.x
document are not synchronized. Try to refresh and save the original document; then attempt
migration again. (WIS 30762) ..............................................................................................447
The Web Intelligence 2.x document could not be migrated, because the WIQT module returned
an error. Contact your administrator. (WIS 30763) ..............................................................447
Your user profile does not provide you with access to a document domain to save corporate
documents. Save this document as a personal document or contact your administrator. (WIS
40000) ................................................................................................................................448
Interactive Analysis Desktop HTML Interface (WIH) Error Messages...................................448
The document could not be saved. (WIH 00014)..................................................................448
2010-11-0540
Contents
30.4.2
30.4.3
30.5
30.5.1
30.5.2
30.5.3
30.6
30.6.1
30.6.2
30.6.3
31.1
31.2
32.1
32.2
32.3
32.4
32.5
32.6
32.7
32.8
32.9
32.10
32.11
32.12
32.13
32.14
32.15
32.16
32.17
32.18
32.19
32.20
The session timed out. The document {document_name}.wid has been autosaved in the
Favorites\~WebIntelligence folder. Click Restore to retrieve it. (WIH 00015).......................448
The session timed out, but the document could not be autosaved because the following security
rights are not assigned (WIH 00016): {list_of_rights}............................................................449
ReportEngine Web Intelligence (RWI) Error Messages ........................................................449
RWI 00000 - RWI 00314......................................................................................................449
RWI 00315 - RWI 00605......................................................................................................455
RWI 00606 - RWI 00850......................................................................................................460
Custom Data Source (CDS) Framework Error Messages....................................................464
Custom Data Source User Interface Framework error messages.........................................464
Web Services Custom Data Source Plugin error messages.................................................467
Custom Data Source Framework error messages................................................................470
HTTP errors.........................................................................................................................477Chapter 31
Troubleshooting HTTP 404 errors........................................................................................477
Resolving HTTP 500 errors..................................................................................................477
Xcelsius error messages.....................................................................................................479Chapter 32
DSL initialisation failed. (XLS 000001).................................................................................479
Could not find DSL services; Check your BusinessObjects installation. (XLS 000002)........479
Could not connect to BusinessObjects server; Check your network connection. (XLS
000003)...............................................................................................................................479
Failed to (de-)serialise data. (XLS 000004)...........................................................................479
Failed to serialise exception: {0}. (XLS 000005)...................................................................480
Universe {0} not found. (XLS 000006)..................................................................................480
Could not load Dashboard Design DSL library. (XLS 000007)..............................................480
Could not load session. (XLS 000008).................................................................................480
Request processing failed. (XLS 000009)............................................................................481
Cannot find {0} infoobject: {1}. Please verify that it exists and that you have rights on it. (XLS
000010)...............................................................................................................................481
Cannot find data connection information for universe: {0} (XLS 000011)..............................481
Unknown server error. Please try again later. (XLS 000012)................................................481
Invalid Dashboard Design Server configuration property: {0}. (XLS 000013)........................481
Cannot find or load Dashboard Design Server configuration file. (XLS 000014)...................482
Your query generated multiple SQL statements which is not supported. Please modify your query.
(XLS 000015)......................................................................................................................482
Combined Query is not supported. (XLS 000016)................................................................482
The cache file path is invalid. (XLS 000017).........................................................................482
Failed to initialize Dashboard Design Processing Server. (XLS 000018)...............................483
Current user does not have right: {0} on object: {1} (XLS 000019).......................................483
Could not connect to the server. Log on and try again. (XLW 000001)................................483
2010-11-0541
Contents
32.21
33.1
33.2
33.3
33.4
33.5
33.6
33.7
33.8
33.9
33.10
33.11
33.12
33.13
33.14
33.15
33.16
33.17
33.18
33.19
33.20
33.21
33.22
33.23
33.24
33.25
33.26
33.27
Could not communicate with the server. Try again. If the problem persisits, contact your system
administrator or technical support. (XLW 000002)...............................................................483
Platform Search Error Messages........................................................................................485Chapter 33
New document extraction version has not been implemented. Contact your system
administrator.(PSS 00002)...................................................................................................485
Extraction failed due to unknown reasons for {0}. Contact your system administrator. (PSS 00003)
............................................................................................................................................485
While extracting the object with SI_ID {0}, an Out of Memory Error occurred. Please check the
document size.(PSS 00004).................................................................................................486
Indexing failed because more than one index engine has been enabled (PSS 01001)...........486
Indexing failed. All index engines may be disabled (PSS 01002)...........................................486
Index is not ready. Please try again later (PSS 01004).........................................................486
The string is too generic. Provide a more specific string.(PSS 02001)..................................487
Search string is empty. Enter a valid search string (PSS 02003)..........................................487
Search string is invalid. Please refer to the documentation for information about supported search
syntax (PSS 02004).............................................................................................................487
Server is busy. Please try again later (PSS 02005)..............................................................487
Summary extraction failed for {0}.(PSS 03002) ...................................................................488
Content extraction failed for {0}.(PSS 03004) ......................................................................488
Unable to extract the object with SI_ID {0} because the document may be a PPT with empty
comments, password protected, or may have content that is not extractable.(PSS 03007)..488
Unable to extract the object with SI_ID {0} because the PDF may have content that is not
extractable.(PSS 03008) .....................................................................................................489
Unable to extract the object with SI_ID {0} because the document may have content that is not
extractable, or may be too large.(PSS 03009) .....................................................................489
RASFactory service failed to return. (PSS 04001)................................................................489
Unsupported InfoObject {0} has been passed on to Crystal Reports extraction.(PSS 04003).489
Failed to close Crystal report {0}.(PSS 04005) ....................................................................490
RAS has failed to open the document {0}.(PSS 04006)........................................................490
Failed to create context for universe with an exception: {0}.(PSS 05001).............................490
Failed to retrieve DataSourceElement value. Ensure DataSourceName is created and the
connection is available.(PSS 05002) ...................................................................................490
Unable to create Business Layer for universe {0}. This may be due to context failure or unavailable
core services.(PSS 05003) .................................................................................................491
Interactive analysis processing server may be down. Unable to create document instance.(PSS
06002).................................................................................................................................491
The new document extraction version is not implemented. Contact your system administrator.(PSS
06004) ................................................................................................................................491
Failed to close interactive analysis document {0}.(PSS 06005) ............................................491
Interactive analysis processing server has failed to open the document {0}.(PSS 06006).....492
Interactive analysis document contains incorrect universe connection information.(PSS
06007).................................................................................................................................492
2010-11-0542
Contents
33.28
33.29
34.1
34.2
34.3
34.4
34.5
34.6
34.7
34.8
34.9
34.10
34.11
34.12
34.13
34.14
34.15
34.16
34.17
34.18
34.19
34.20
34.21
34.22
34.23
34.24
34.25
34.26
34.27
34.28
34.29
34.30
34.31
34.32
34.33
34.34
34.35
34.36
Explorer Search Server may be down. Unable to compile results.(PSS 07001)....................492
Internal error occurred while retrieving Information Spaces.(PSS 07002).............................492
Monitoring Error Messages................................................................................................493Chapter 34
An error occurred while running the probe (MON00001) .....................................................493
An error occurred while listing the probes (MON00002)......................................................493
An error occurred while reading the probe result from file with id: {0} (MON00003).............493
An error occurred while retrieving the URLs for Properties/Schedule/History Action
(MON00004).......................................................................................................................494
An error occurred while paginating the probes list (MON00006) .........................................494
{0} is not a valid {1} value (MON00007)................................................................................494
An exception occurred while executing the request (MON00008)........................................494
An error occurred while retrieving the trend data from the database (MON00009)...............495
An error occurred while listing the watches (MON00010)....................................................495
An error occurred while retrieving the details for the watch {0} (MON00011).......................495
An error occurred while retrieving the status of the watch {0}. (MON00012)........................495
An error occurred while creating the watch {0} (MON00013)...............................................496
An error occurred while deleting the watch {0} (MON00014)...............................................496
An error occurred while making a copy of the watch {0} (MON00015).................................496
An error occurred while editing the watch {0} (MON00016).................................................496
An error occurred while paginating the watches list (MON00017)........................................497
An error occurred while marking the watch {0} as Favorite (MON00018).............................497
An error occurred while retrieving recent alerts (MON00019)..............................................497
An error occurred while retrieving alerts for the watch {0} (MON00020)..............................497
An error occurred while deleting an alert (MON00021)........................................................498
An error occurred while retrieving the total number of alert pages (MON00022)..................498
An error occurred while retrieving watches with alerts count (MON00023)..........................498
An error occurred while setting alert confirmed property (MON00024)................................498
An error occurred while setting alert marked as read (MON00025)......................................499
Server not running (MON00026)..........................................................................................499
Unknown Error (MON00027)...............................................................................................499
An error occurred while retrieving the KPIs (MON00028)....................................................499
An error occurred while refreshing the managed entities (MON00029)................................499
An error occurred while enabling watch (MON00030)..........................................................500
Timeout value cannot be zero or negative (MON00031) .....................................................500
Incorrect timeout value (MON00032) ..................................................................................500
Input Parameter Type "{0}" not recognized (MON00033)......................................................500
Incorrect input parameter : {0} (MON00034) .......................................................................501
Error in getting the Probe InfoObject (MON00035) .............................................................501
Probe InfoObject was not found (MON00036) ....................................................................501
The following argument(s) are missing {0} (MON00037) .....................................................501
2010-11-0543
Contents
34.37
34.38
34.39
34.40
34.41
34.42
34.43
34.44
34.45
34.46
34.47
34.48
34.49
34.50
34.51
34.52
34.53
An error occurred while disabling or enabling the watch {0} (MON00039)............................501
Monitoring service may not have started yet or might have failed to start. Please wait for sometime
or check the service status (MON00041)............................................................................502
An exception has occurred while executing the probe (MON00042)....................................502
An exception occurred while formatting the response (MON00044)....................................502
An error occurred while listing the Users (MON00045)........................................................502
An error occurred while retrieving the KPI details (MON00046)...........................................503
An error occurred while retrieving synchronized live data (MON00047)...............................503
An error occurred while retrieving the watch state (MON00048)..........................................503
An error occurred while retrieving the probe run result report (MON00049) ........................503
An error occurred while saving the probe (MON00050).......................................................503
An error occurred while displaying the properties of the Probe (MON00051) ......................504
An error occurred while saving the application properties (MON00052)...............................504
An error occurred while displaying the properties of the application (MON00053)................504
An error occurred while running the database backup task (MON00054).............................504
An error occurred while retrieving the details of the Derived metric (MON00055)................505
An error occurred while editing the Derived metric (MON00056).........................................505
An error occurred while disabling watch (MON00057).........................................................505
More Information.................................................................................................................507Appendix A
Index 509
2010-11-0544
Administration & Security Error Messages
Administration & Security Error Messages
Administration error messages include the following ranges and categories:
• Administration (ADM) Errors
• Administration Wizard (ADW) Error Messages
• BI Platform Servers (FWB) Error Messages
• BIP Framework Middleware (FWM) Error Messages
• Security (USR) Errors
1.1 Administration (ADM) Errors
Administration error messages include the following:
CategoryRange
Administration errorsADM0012 - ADM 00208
1.2 Administration Wizard (ADW) Error Messages
Administration Wizard error messages include the following:
CategoryRange
Administration Wizard errorsADW0002 - ADW0025
2010-11-0545
Administration & Security Error Messages
1.3 BIP Framework Middleware (FWM) Error Messages
BIP Framework Middleware (FWM) includes the following error message categories:
CategoryRange
BIP Framework Middleware (FWM)FWM 00001 - FWM 00009
BIP Framework Middleware (FWM)FWM 01001 - FWM 01014
BIP Framework Middleware (FWM)FWM 02001 - FWM 02124
BIP Framework Middleware (FWM)FWM 04002 - FWM 04038
BIP Framework Middleware (FWM)FWM 08001 - FWM 08006
BIP Framework Middleware (FWM)FWM 10001 - FWM 10007
BIP Framework Middleware (FWM)FWM 12001 - FWM 12013
BIP Framework Middleware (FWM)FWM 14001 - FWM 14009
BIP Framework Middleware (FWM)FWM 16001 - FWM 16005
BIP Framework Middleware (FWM)FWM 17001 - FWM 17003
1.3.1 FWM 00001 - FWM 00009
Transport error: Communication failure.(FWM 00001)
Cause
The client could not communicate with the server, because the server may be offline, because there is
a network communication problem, or because a client request may have timed out.
Action
Ensure that the server is online, that there is network communication, and increase the amount of time
before requests time out.
2010-11-0546
Administration & Security Error Messages
Transport error: Insufficient resources.(FWM 00002)
Cause
The client and server cannot communicate with each other.
Action
Ensure both the client and server use SSL or do not use SSL.
Kerberos target name %1 is unknown. Please contact your system administrator to make sure it's set up properly.(FWM 00003)
Cause
The target account or the Service Principal Name (SPN) is not recognized.
Action
Ensure that the target account and target SPN exist.
Failed to contact the Active Directory server. (FWM 00004)
Cause
The Active Directory Server is unreachable.
Action
Find the server name in the logs, and ensure that the server is accessible.
The Active Directory Authentication plugin could not authenticate at this time. Please try again. If the problem persists, please contact your technical support department. (FWM 00005)
Cause
The Active Directory plugin uses an outdated alias format.
Action
Update the Active Directory plugin in the Central Management Console, on the "AD plugin" page.
Active Directory Authentication failed to log you on. Please contact
your system administrator to make sure you are a member of a valid
2010-11-0547
Administration & Security Error Messages
mapped group and try again. If you are not a member of the default
domain, enter your user name as UserName@DNS_DomainName, and then try
again. (FWM 00006)
Cause
A logon context cannot be created.
Action
Ensure that your configuration file entry is valid, and that you have the permissions necessary to create
a login context.
Invalid username or password. If your account is under any root other than %1, you must enter your DN. (FWB 00007) (FWM 00007)
Cause
Your username could not be authenticated.
Action
Enter a valid username and password.
Note:
If your account is on another system, you must enter your distinguished name (DN).
LDAP Authentication has not been configured to use single sign on. Please contact your system administrator. (FWM 00008)
Cause
You have not configured Single Sign-On.
Action
Configure Single Sign-On.
LDAP Authentication with an empty password is not supported when single sign on is not enabled. (FWM 00009)
Cause
You have not entered a password.
2010-11-0548
Administration & Security Error Messages
Action
Enter a valid password.
1.3.2 FWM 01001 - FWM 01014
A problem occurred while talking to the server {0} (FWM 01001)
Cause
A problem occurred while communicating with the server.
Action
See the cause of the problem for more information.
Unable to reconnect to the CMS {0}. The session has been logged off or has expired. (FWM 01002)
Cause
You have logged off or your session has expired.
Action
Log on again.
Server {0} not found or server may be down (FWM 01003)
Cause
The server cannot be found. It may be offline.
Action
Check the port settings of the Central Management Server, and then start and enable the server.
Unable to open a socket to talk to CMS {0} (FWM 01005)
Cause
Unable to open a socket to communicate with the Central Management Server.
2010-11-0549
Administration & Security Error Messages
Action
Ensure that the Central Management Server is running.
Unable to connect to service {0} from server {1} via CMS {2} (FWM
01006)
Cause
Unable to connect to the service through the Central Management Server.
Action
Log on to the Central Management Console and ensure that the service is running on the appropriate
server.
Unable to list services from server {0} via CMS {1} (FWM 01007)
Cause
Unable to list the services running on the specified server via the specified Central Management Server.
Action
Log on to the Central Management Console and ensure that the services are running on the appropriate
servers.
Unable to find servers in CMS {0} and cluster {1} with kind {2} and extra criteria {3}. All such servers could be down or disabled by the administrator. (FWM 01008)
Cause
Unable to find the required servers. They may be offline or disabled.
Action
Ensure that all required servers are running and enabled.
Communication error occurred when trying to connect to server {0} (FWM
01009)
Cause
The indicated communication error occurred while connecting to the server.
2010-11-0550
Administration & Security Error Messages
Action
See the cause of the error for more information.
The server group {0} not found in CMS {1} (FWM 01010)
Cause
The indicated server group was not found on the Central Management Server.
Action
Create the indicated server group.
Service {0} not found on server {1} (FWM 01011)
Cause
The indicated service cannot be found on the indicated server.
Action
Log on to the Central Management Console and ensure that the indicated service is running on the
indicated server.
SSL mode is being requested but the following argument(s) are not present: {0} (FWM 01012)
Cause
The request for SSL mode is missing some arguments.
Action
Ensure that all SSL arguments are present in the request.
SSL mode is being requested. Failure occurred trying to open or read data from the file named {0}. The error message is {1}. (FWM 01013)
Cause
The indicated file could not be opened or read.
Action
Ensure that the SSL files exist and that they can be read.
2010-11-0551
Administration & Security Error Messages
Unable to find servers in CMS {0} and cluster {1} with kind {2} and service {3}. All such servers could be down or disabled by the administrator. (FWM 01014)
Cause
Servers with required services cannot be found. They may be offline or disabled by an administrator.
Action
Ensure that all required servers are online and enabled, and that their required services are running.
1.3.3 FWM 02001 - FWM 02124
{0} (FWM 02001)
Cause
The indicated exception occurred.
Action
For more information, see the cause of the indicated exception.
There was a problem retrieving the service {0} from the server {1} (FWM 02002)
Cause
The service could not be accessed on the server.
Action
Ensure that the service is running and enabled on the server.
The {0} plug-in does not exist in the CMS (FWM 02017)
Cause
The required plugin is not installed on the Central Management Server.
2010-11-0552
Administration & Security Error Messages
Action
Ensure that the plugin is installed.
The {0} plug-in could not be initialized (FWM 02018)
Cause
The required plugin could not be initialized.
Action
Ensure that you have permissions to create new InfoObjects of this type.
The object with ID {0} does not exist in the CMS or you do not have the right to access it (FWM 02020)
Cause
The required object does not exist in the Central Management Server (CMS), or you do not have
necessary access rights.
Action
Ensure that the object exists in the CMS and that you have the necessary access rights.
There was an error involving the system property \"{0}\". The value of this property at the time of the error was: {1}. This value does not appear to be valid. (FWM 02031)
Cause
The value of the required system property is invalid.
Action
Provide a valid system property value.
There was an error reading the shared secret from the trusted principal configuration file. (FWM 02045)
Cause
The shared secret could not be read from the trusted principal configuration file.
Action
Ensure that the trusted principal configuration file is present and that it can be read.
2010-11-0553
Administration & Security Error Messages
The object with ID {0} , Title "{1}", Kind "{2}" has changed since last query (FWM 02050)
Cause
The required InfoObject has changed since the last query.
Action
Query the InfoObject again.
The service with ID {0} cannot be removed. It is currently used by a server. (FWM 02056)
Cause
You cannot remove the required services, because a server is currently using it.
Action
Ensure that the service does not have an associated server.
The service container with ID {0} cannot be removed. It is currently used by a server. (FWM 02057)
Cause
You cannot remove the required service container, because a server is currently using it.
Action
Ensure that the service container does not have an associated server.
Failed to audit the event(s) (FWM 02072)
Cause
The required events could not be audited.
Action
Ensure that the Program Job Server is running and enabled.
2010-11-0554
Administration & Security Error Messages
Event Type {0} is disabled (FWM 02073)
Cause
The required event type is disabled.
Action
Enable the event types that you want to audit.
The preferred viewer locale has not been set for this user: {1} ({0}) (FWM 02077)
Cause
This user does not have a preferred viewing locale.
Action
Set the preferred viewing locale for this user.
The locale has not been set for this user: {1} ({0}) (FWM 02078)
Cause
This user does not have a default locale.
Action
Set the default locale for this user.
Service {0} has been disabled (FWM 02079)
Cause
The required service is disabled.
Action
Ensure that the service is enabled.
Invalid logon token: {0}. (FWM 02080)
Cause
You have used an invalid logon token.
2010-11-0555
Administration & Security Error Messages
Action
Provide a valid logon ticket.
The file properties are structured incorrectly. (FWM 02082)
Cause
The structure of the file properties is invalid.
Action
Ensure that the API is used correctly.
Audit service is disabled. (FWM 02083)
Cause
The Audit service is disabled.
Action
Ensure that Central Management Server and the Audit service are running and enabled.
Audit event source object CUID must be set before calling other auditing API. (FWM 02084)
Cause
The application object CUID is not set.
Action
Ensure that application object CUID is set through
IClientSideAuditing.setApplicationObjCUID(StringappObjCUID) before calling auditing on the application.
Event Type {0} is not supported by application {1} (FWM 02085)
Cause
The required event type is unsupported.
Action
You can only audit supported event types.
2010-11-0556
Administration & Security Error Messages
Duration must be a number >=0; ObjectCUID, SessionCUID and UserCUID can not be an empty string. (FWM 02086)
Cause
Some of the event object parameters are invalid.
Action
Provide valid event object parameters.
Invalid locale. The locale is undefined, set to the user default locale, or not supported. (FWM 02087)
Cause
The default locale of this use account is invalid.
Action
Ensure the user provides a valid locale.
The CMS system database is not available. The error cannot be rectified by the end user. Please report this error to your system or database administrator. (FWM 02088)
Cause
The Central Management Server database is unavailable.
Action
Contact your system administrator.
Search Service is not initialized properly. (FWM 02091)
Cause
The Search Service has not initialized properly.
Action
Restart the Adaptive Processing Server.
2010-11-0557
Administration & Security Error Messages
Adaptive Processing Server is shutting down. (FWM 02092)
Cause
The Adaptive Processing Server is shutting down.
Action
Restart the Adaptive Processing Server.
Invalid query string {0}, Query Parser failed to parse the string. (FWM 02093)
Cause
The parser cannot parse the query string.
Action
Revise the query string.
Current search service is already indexing, please try again later. (FWM 02094)
Cause
The Search Service can process one indexing request at a time.
Action
Wait for one indexing request to finish before you attempt another.
Query string is empty. (FWM 02099)
Cause
The query string is empty.
Action
Provide content for the query string.
2010-11-0558
Administration & Security Error Messages
Unable to parse the following query: {0} (FWM 02103)
Cause
The Central Management Server (CMS) query string cannot be parsed.
Action
Provide a valid CMS query string.
Unable to parse the following following text: {0} (FWM 02104)
Cause
The Central Management Server (CMS) query string cannot be parsed.
Action
Provide a valid CMS query string.
Event type id {0} is not valid, or your query did not contain SI_AUDIT_EVENTS. (FWM 02105)
Cause
The event type id is invalid.
Action
Ensure that your event object id is valid, and that your query includes SI_AUDIT_EVENTS
Event detail id {0} is not valid, or your query did not contain SI_AUDIT_EVENT_DETAILS. (FWM 02106)
Cause
The event type id is invalid.
Action
Ensure that your event object id is valid, and that your query includes SI_AUDIT_EVENTS
2010-11-0559
Administration & Security Error Messages
File {0} cannot be read. (FWM 02107)
Cause
The file cannot be read.
Action
Ensure that the file can be read.
File {0} size is beyond {1} bytes limit; too large to handle. (FWM
02108)
Cause
The file size exceeds the suggested value.
Action
Lower the size of your file, or select a smaller file.
Failed to read entire file for {0}. (FWM 02109)
Cause
The file could not be read completely.
Action
Ensure that your file is not corrupted.
A user can only suspend a key that is in the re-keying process. (FWM
02110)
Cause
You have tried to suspend a key that is not being re-keyed.
Action
You can only suspend a key during the re-keying process.
2010-11-0560
Administration & Security Error Messages
A user can only re-key a deactivated cluster key. (FWM 02111)
Cause
You can re-key only a deactivated cluster key.
Action
Ensure that a key is deactivated before you re-key it.
The current cluster key is not active. (FWM 02112)
Cause
The current key is inactive.
Action
Activate the current key.
The current audit level is not the custom level (FWM 02113)
Cause
You cannot enable or disable audit events when the current audit level is not custom.
Action
Ensure that the current audit level is custom.
You can not enable or disable audit details that cannot be specified (FWM 02114)
Cause
You cannot toggle unspecified audit details.
Action
Ensure that the audit details that you want to toggle have been specified.
Unable to create encryption/decryption key. (FWM 02115)
Cause
A file encryption key or a salt could not be generated.
2010-11-0561
Administration & Security Error Messages
Action
Ensure that the required encryption libraries are installed.
Each collection must contain the same number of items. Collection {0} is not the same size as collection {1}. (FWM 02118)
Cause
You have attempted to download or upload a set of files without usinng the correct number of cipher
keys.
Action
You must ensure that the number of cipher keys is equal to the number of files that you want to download
or upload.
Failed to establish confidential channel. (FWM 02119)
Cause
A Confidential Channel could not be established.
Action
Perform the action again.
A user can only resume a key that is suspended (FWM 02120)
Cause
You have attempted to resume an active key.
Action
Ensure that a key is suspended before you resume it.
A user cannot mark a cluster key as compromised if the cluster key is active. (FWM 02121)
Cause
You have attempted to mark an active key as compromised.
Action
Ensure that a key is inactive before marking it as compromised.
2010-11-0562
Administration & Security Error Messages
The {0} plug-in does not support the publication feature. (FWM 02122)
Cause
The selected plugin does not support publishing.
Action
Select a plugin type that supports publishing.
Event detail value can not be null. (FWM 02123)
Cause
The event detail has no content.
Action
Ensure that your event detail has content.
Confidential channel has been disabled. (FWM 02124)
Cause
This task cannot be performed because the Confidential Channel has been disabled.
Action
To enable the confidential channel, set businessobjects.enterprise.cc to true or remove the
property from the Java system properties.
1.3.4 FWM 04002 - FWM 04038
An SDK exception occurred. (FWM 04002)
Cause
The indicated SDK exception has occurred.
Action
For more information, see the cause of the indicated exception.
2010-11-0563
Administration & Security Error Messages
Import folder CUID '{0}' does not exist on this CMS. (FWM 04003)
Cause
A CUID could not be resolved in the BIAR file, or a CUID is missing from the destination Central
Management Server.
Action
Ensure that your BIAR file is valid.
Enterprise Session Invalid. (FWM 04004)
Cause
You have logged out of your SAP BusinessObjects Enterprise session, or it has expired.
Action
Log on again.
Export to File Path invalid. (FWM 04005)
Cause
The file path to which you have tried to export is invalid.
Action
Provide a valid file path.
Import file '{0}' does not exist. (FWM 04007)
Cause
A file cannot be uploaded to the File Repository Server because it is missing from the BIAR file.
Action
Ensure that your BIAR file is valid.
2010-11-0564
Administration & Security Error Messages
'{0}' is not an InfoObject; therefore, import cannot be completed. (FWM 04008)
Cause
The specified object in the BIAR file is not an InfoObject.
Action
Ensure that your BIAR file is valid.
Import file parsing exception occurred : '{0}' (FWM 04009)
Cause
The businessobjects.xml file in your BIAR file is invalid.
Action
Ensure that your BIAR file is valid.
Invalid element in XML file : '{0}' (FWM 04010)
Cause
There is an invalid element within the businessobjects.xml file in your BIAR file.
Action
Ensure that your BIAR file is valid.
XSD file parsing exception occurred : '{0}' (FWM 04011)
Cause
An error occurred while parsing the .xsd file.
Action
For information on .xsd files installed by SAP BusinessObjects Enterprise, refer to the Service
Marketplace.
2010-11-0565
Administration & Security Error Messages
No schema definition (XSD) is available for '{0}' (FWM 04012)
Cause
The .xsd file is missing.
Action
Ensure that all necessary .xsd files are installed.
Item '{1}' does not exist in enumeration '{0}'. (FWM 04016)
Cause
Your BIAR file contains an invalid enumeration item.
Action
Ensure that your BIAR file is valid.
Invalid XSD passed in, see log file. (FWM 04022)
Cause
An invalid .xsd file has been passed in.
Action
For information on .xsd files installed by SAP BusinessObjects Enterprise, refer to the Service
Marketplace.
Cannot import infoobject with missing CUID. (FWM 04026)
Cause
An InfoObject cannot be imported because it is missing a CUID.
Action
Ensure that your BIAR file is valid.
2010-11-0566
Administration & Security Error Messages
Cannot import infoobject CUID '{0}' with missing parent CUID. (FWM
04027)
Cause
An InfoObject cannot be imported because it is missing a parent CUID.
Action
Ensure that your BIAR file is valid.
Duplicate namespace prefix '{0}' defined for namespaces '{1}' and '{2}'. (FWM 04029)
Cause
A duplicate namespace prefix has been defined.
Action
If you have your own .xsd file, ensure that it does not have a namespace prefix identical to an installed
.xsd file.
The kind '{0}' does not exist in the CMS. (FWM 04030)
Cause
The specified InfoObject type does not exist on the Central Management Server.
Action
Ensure that the InfoObject type is installed properly.
Unrecognized format for plug-in namespace URI '{0}'. Details: '{1}' (FWM 04031)
Cause
The format for the plugin namespace URI was not recognized.
Action
Ensure that your BIAR file is valid.
2010-11-0567
Administration & Security Error Messages
The type '{0}' could not be found. (FWM 04032)
Cause
An InfoObject type is missing.
Action
Ensure that the .xsd file for this type of InfoObject is installed.
Required dependencies not found on source system : '{0}' (FWM 04036)
Cause
An object ID referenced by an exported object cannot be resolved to a CUID.
Action
Disable dependency enforcement during export or ensure that all IDs reference valid objects on the
source system that can be viewed by the user who exports the documents.
Invalid property array '{0}' on object with CUID '{1}' (FWM 04038)
Cause
An InfoObject you have tried to export has a property array with an unexpected structure.
Action
Check the properties of the InfoObject and ensure that it has a valid array structure.
1.3.5 FWM 08001 - FWM 08006
Setting for Property-value pair ({0}, {1}) contradicts ({2}, {3}). Resolve the contradiction. (FWM 08001)
Cause
The settings of two property-value pairs contradict each other.
Action
Provide correct settings for the two property-value pairs.
2010-11-0568
Administration & Security Error Messages
The object with ID {0} does not exist in the system (FWM 08002)
Cause
The referenced object does not exist in the system.
Action
Ensure that you have used the correct ID and that a corresponding object with the same ID exists in
the system.
The value {1} of property {0} does not fall within the expected {2} and {3} range (FWM 08003)
Cause
The value of the indicated property is out of range.
Action
Ensure that the value set falls within the correct range.
{0} is not a valid value defined in interface {1} (FWM 08004)
Cause
The indicated parameter value is invalid.
Action
Provide a valid parameter value.
Principal must be removed from the object to inherit the rights from parent (FWM 08005)
Cause
The principal has not been removed from the object.
Action
Remove the principal from the object, before parent rights can be inherited.
2010-11-0569
Administration & Security Error Messages
1.3.6 FWM 10001 - FWM 10007
An exception occurred that prevents the reading or writing of an object to or from storage. (FWM 10002)
Cause
An exception in the storage layer prevents the processing of an object.
Action
For more information, see the cause of the indicated exception.
An exception occurred in the BIAR engine. (FWM 10004)
Cause
An exception has occurred in the BIAR engine.
Action
For more information, see the cause of the indicated exception.
A {0} occurred; original exception message {1} (FWM 10005)
Cause
An exception has occurred.
Action
Please see the cause of the indicated exception for more information.
An error occurred while parsing a query: '{0}' (FWM 10006)
Cause
A query could not be parsed.
Action
For more information, see the cause of the indicated exception, and ensure that the syntax of your
query is correct.
2010-11-0570
Administration & Security Error Messages
{0} exception(s) occurred. (FWM 10007)
Cause
An exception has occurred.
Action
For more information, see the cause of each indicated exception.
1.3.7 FWM 12001 - FWM 12013
A {0} occurred; original exception message {1} (FWM 12001)
Cause
An exception has occurred.
Action
For more information, see the cause of the indicated exception.
Import or Export action can't be determined. (FWM 12002)
Cause
The type of action could not be determined.
Action
Provide an Import or Export action.
XML validation during import is no longer supported. (FWM 12007)
Cause
The XML validation that you have requested during import is unsupported.
Action
Set validateXML to false.
2010-11-0571
Administration & Security Error Messages
The following query is not recognized by the BIAR engine: '{0}' (FWM
12011)
Cause
The BIAR engine cannot parse the query.
Action
Ensure that your query is properly formatted.
Invalid BIAR file. If you want to import a file older than version {0} please use the upgrade management tool. (FWM 12012)
Cause
You cannot import BIAR files from old deployment versions.
Action
Upgrade your deployment to a supported version, and then use the upgrade management tool to import
the BIAR file.
Unable to open BIAR file, password is invalid. (FWM 12013)
Cause
You have entered an incorrect password.
Action
Ensure that Caps Lock is off, and re-enter your password.
BIAR file format is not recognized. Please re-export BIAR file with a compatible format. (FWM 12014)
Cause
You have attempted to open a BIAR file. The contents of the file cannot be recognized.
Action
Recreate the BIAR file.
2010-11-0572
Administration & Security Error Messages
1.3.8 FWM 14001 - FWM 14009
No objects in replication list. (FWM 14001)
Cause
The replication list for this job does not contain any objects that the account has permission to replicate.
Action
Ensure that the replication list is populated with objects, and that the user specified by the remote
system connection has the Replicate permission on the objects on the list.
There is no replication list with CUID "{0}" at the origin site. (FWM
14002)
Cause
The replication job has requested a replication list using an invalid CUID.
Action
Ensure that the requested replication list exists in the system.
Filter settings exclude everything from replication. (FWM 14003)
Cause
The settings of the replication filter exclude all objects.
Action
Ensure that the replication job settings are correct.
Invalid refresh mode value: {0} (FWM 14004)
Cause
The current refresh mode value is invalid.
Note:
CeApplicationRefreshMode.REFRESH_TO_MASTER is not valid for one-way replication.
2010-11-0573
Administration & Security Error Messages
Action
Ensure that your replication job settings are correct. See CeApplicationRefreshMode for applicable
values.
Invalid conflict resolution mode value: {0} (FWM 14005)
Cause
The current conflict resolution mode value is invalid.
Note:
CeConflictResolutionMode.SLAVE_WINS is not valid in one-way replication.
Action
Ensure that your replication job settings are correct. See CeApplicationRefreshMode for applicable
values.
Cannot run refresh replication without refresh objects. (FWM 14006)
Cause
The replication job was run in refresh mode, but notobjects were specified.
Action
Ensure that the replication job settings specify objects to be refreshed, or switch to normal replication
mode.
Remote system connection refers to local system. (FWM 14007)
Cause
The origin and destination of the replication job are identical.
Action
Ensure that the remote cluster settings refer to a different SAP BusinessObjects Enterprise deployment.
Invalid combination of refresh mode ({0}) and conflict resolution mode ({1}) (FWM 14008)
Cause
You cannot combine refresh mode and conflict resolution mode. CeConflictResolutionMode.MAS
TER_WINS cannot be used with CeApplicationRefreshMode.REFRESH_TO_MASTER, and CeCon
2010-11-0574
Administration & Security Error Messages
flictResolutionMode.SLAVE_WINS cannot be used with CeApplicationRefreshMode.RE
FRESH_FROM_MASTER.
Action
Ensure that the replication job settings are correct, and see CeConflictResolutionMode and
CeApplicationRefreshMode for applicable values.
Another replication job is replicating content from the same origin site. This job will be attempted again later. (FWM 14009)
Cause
You have attempted to run a replication job while another replication job has been running.
Action
The new replication job will attempt to run again.
1.3.9 FWM 16001 - FWM 16005
Not logged on to a CMS, unable to continue. (FWM 16001)
Cause
You have not logged onto the Central Management Server (CMS).
Action
Before you run any commands, log onto a CMS.
The command '{0}' is missing the following required parameter: {1} (FWM 16002)
Cause
This runtime command is missing a required parameter.
Action
For information about acceptable parameters, see the command's description.
2010-11-0575
Administration & Security Error Messages
The command '{0}' does not recognize '{1}' as a valid parameter. (FWM
16003)
Cause
This runtime command contains an invalid or unrecognized parameter.
Action
For information about acceptable parameters, see the command's description.
The command '{0}' is not recognized as a valid command. (FWM 16004)
Cause
This runtime command is invalid.
Action
For information on valid runtime commands, consult the documentation.
Failed to write to file '{0}'. (FWM 16005)
Cause
Content could not be written into the specified file.
Action
Ensure that the correct write permissions have been specified.
1.3.10 FWM 17001 - FWM 17003
Option {0} requires a value. (FWM 17001)
Cause
This option requires a value. The value is missing.
Action
Ensure that the command-line syntax is correct, and retry the operation.
2010-11-0576
Administration & Security Error Messages
Option {0} doesn't allow a value. (FWM 17002)
Cause
This option does now allow values. However, it contains a value.
Action
Ensure that the command-line syntax is correct, and retry the operation.
Unknown option '{0}'. (FWM 17003)
Cause
This option is invalid.
Action
Ensure that the command-line syntax is correct, and retry the operation.
1.4 BI Platform Servers (FWB) Error Messages
BI Platform Servers includes the following error meessage categories:
CategoryRange
BI Platform Servers (FWB)FWB 00004 - FWB 200002
1.4.1 FWB 00001 - FWB 00999
The request is not for the current CMS, it is for %1. (FWB 00001)
Cause
A request was sent to an unexpected Central Management Server (CMS).
2010-11-0577
Administration & Security Error Messages
Action
Ensure that you send your requests to the correct CMS.
The %1 security plugin is not enabled. Contact your system administrator for details. (FWB 00002)
Cause
A requested security plugin is disabled or missing.
Action
Ensure that the requested security plugin file exists, and that it is enabled.
Not a valid logon token. (FWB 00003)
Cause
The logon token has expired, the authentication information is missing, or the user is invalid.
Action
Regenerate the token with the necessary authentication information for a valid user, and log on again.
Security server failed to decrypt the Kerberos ticket sent by the client. Contact your system administrator to make sure Kerberos authentication is configured properly. (FWB 00004)
Cause
The server could not decrypt some of the client's Kerberos authentication data.
Action
Ensure that a valid SPN is mapped to the service account.
A logon token was used from a client other than one specified in the token, or there was an error determining the IP address of the client. (FWB 00005)
Cause
The logon token contains information about a different client, or the IP address of the client could not
be determined.
2010-11-0578
Administration & Security Error Messages
Action
Ensure that your token is from the correct client, and that the client's IP address is accessible, or
generate a new token.
Plugin Manager error: Unable to locate the requested plugin %1 on the server. (FWB 00006)
Cause
A requested plugin is missing.
Action
Ensure that the requested plugin exists and that it is properly installed.
User "%1" not found. (FWB 00007)
Cause
The user is missing, or the alias of the user is missing.
Action
Ensure that the user exists and has a valid alias.
Enterprise authentication could not log you on. Please make sure your logon information is correct. (FWB 00008)
Cause
You could not log on because your username could not be found, or because your password is invalid.
Action
Ensure that your username and password are correct.
This feature has been disabled. (FWB 00009)
Cause
The requested feature is disabled.
Action
Enable the requested feature.
2010-11-0579
Administration & Security Error Messages
User must have at least one alias. (FWB 00010)
Cause
The user account does not have any aliases.
Action
Ensure that the user account has at least one alias.
Session ID is not valid. (FWB 00011)
Cause
Your session has expired.
Action
Log on again.
The user account has been disabled. (FWB 00012)
Cause
The user account may have been manually disabled, the alias of the user account may have been
disabled, the password may have expired, or the user may have attempted to log on unsuccessfully
too many times.
Action
Enable the user account, and ensure that the user's password and aliases are valid.
You do not have enough Named User Licenses to make this user a named user. You have %1 Named User Licenses. (FWB 00013)
Cause
The maximum number of named users allowed by the current license keys has been reached.
Action
Wait for other users to log off, or upgrade the license keys.
2010-11-0580
Administration & Security Error Messages
All of your system's %1 Concurrent Access Licenses are in use at this time or your system's license key has expired. Try again later or contact your administrator to obtain additional licenses. (FWB 00014)
Cause
The maximum number of concurrent users allowed by the current license keys has been reached.
Action
Wait for other users to log off, or upgrade the license keys.
This operation is not permitted with your current set of license keys. Upgrade your license keys to enable this operation. (FWB 00015)
Cause
The current license keys do not allow this operation (for example, using third-party authentication, or
modifying server groups or events).
Action
Upgrade your license keys.
Your license key is invalid or has expired. If you received a temporary license key by purchasing another BusinessObjects product, you must register BusinessObjects Enterprise to receive your permanent license key. (FWB 00016)
Cause
The current license key is invalid or has expired.
Action
Enter a valid license key.
An exception was thrown from the plugin %1. This plugin will be disabled. Please contact your administrator. (FWB 00017)
Cause
A third-party plugin encountered an error. It has been disabled.
2010-11-0581
Administration & Security Error Messages
Action
Remove, upgrade, and test the third-party plugin before your enable it.
The authentication provider (%1) associated with this logon session does not support inter-process Single Sign-On. Contact your system administrator for details. (FWB 00018)
Cause
The authentication provider for this session does not support Single Sign-On.
Action
Use a diferent authentication provider, or configure your current provider to work with Single Sign-On.
The authentication provider (%1) associated with this logon session does not have inter-process Single Sign-On enabled. Contact your system administrator for details. (FWB 00019)
Cause
The authentication provider for this session does not have Single Sign-On enabled.
Action
Enable Single Sign-On for this authentication provider.
Single Sign-On failed. Contact your system administrator for details. (FWB 00020)
Cause
The Single Sign-On authentication information may be invalid, or an internal error may have occurred
on the authentication provider.
Action
Ensure that the Single Sign-On authentication information is valid, and that Single Sign-On is working
correctly on the authentication provider.
2010-11-0582
Administration & Security Error Messages
Single Sign-On failed because the associated session can not be
verified. Try to log on to Business Objects Enterprise again. (FWB
00021)
Cause
The session token may be invalid or may have expired, the authentication information may be missing,
the original session may have expired, or the user account may be invalid.
Action
Re-generate the token with the necessary authentication information for a valid user, and attempt to
log on again.
The Trusted Authentication shared secret has expired. (FWB 00022)
Cause
The trusted authentication shared secret has expired.
Action
Update the trusted authentication shared secret.
The client clock skew is too big. (FWB 00023)
Cause
The trusted authentication request has timed out, or the time difference between the client and server
is too large (because of time zone differences).
Action
Ensure that the trusted authetication requests are not timing out, and synchronize the time on the client
and server machines.
BusinessObjects Enterprise CMS: CMS system database "%1" is not available. The error cannot be rectified by the end user. Please report this error to your system administrator or database administrator. (FWB 00024)
Cause
The Central Management Server (CMS) has no available database connections.
2010-11-0583
Administration & Security Error Messages
Action
Ensure that the database is running, available, and accepting connections from the CMS. Increase the
number of database connections.
Not a valid query. (FWB 00025)
Cause
The query string is invalid.
Action
Ensure that the syntax of the query string is correct.
Duplicate object name in the same folder. (FWB 00026)
Cause
You have tried to create an object with a name that already exists.
Action
Give your object a unique name.
CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)
Cause
Your request times out while waiting for database resources.
Action
The deployment is overloaded. Increase the number of database connections.
The secLdap plugin failed to connect to the specified hosts. (FWB
00028)
Cause
A connection could not be established to the LDAP server.
Action
Ensure that the LDAP server is online, and that it is accepting connections.
2010-11-0584
Administration & Security Error Messages
Logon failed. Please make sure you are a member of a valid mapped group. (FWB 00029)
Cause
The user does not belong to any third-party group mapped in SAP BusinessObjects Enterprise.
Action
Ensure that the user belongs to at least one mapped group.
Directory server is unwilling to perform the requested operation. Additional info: %1 (FWB 00030)
Cause
Directory server cannot perform the requested operation.
Action
Ensure that the user account is enabled.
Destination disabled. [%1]: [%2]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
Cause
The job results could not be delivered because a destination plug-in specified by the job was disabled
on the server that processed the job.
Action
Note the name of the job server that processed the job, find it in the Central Management Console
server list, and use the Destination action to add and configure the required destination.
Invalid confidential channel. (FWB 00032)
Cause
Confidential Channel is not established.
Action
Either use a newer version of SAP BusinessObjects Enterprise that can establish a Confidential Channel,
or disable FIPS mode.
2010-11-0585
Administration & Security Error Messages
Indexed property %1 cannot be encrypted. (FWB 00033)
Cause
Properties that are indexed in the Central Management Server database cannot be encrypted.
Action
Do not enable the encrypted flag for indexed properties.
Non-FIPS-compliant client cannot connect because FIPS mode is turned on. (FWB 00034)
Cause
A non-FIPS-compliant client cannot connect because FIPS mode is enabled.
Action
Install a newer version of SAP BusinessObjects Enterprise that can establish a Confidential Channel,
or disable FIPS mode.
Cannot move cryptographic key from state %1 to state %2 (FWB 00035)
Cause
Some key state changes are disallowed. A de-activated key can only move to the rekeying state, and
once in that state can only be moved to the suspended state.
Action
You can change SI_KEY_STATE only to permissible values.
Missing critical system object. Name: %1, CUID: %2. (FWB 00036)
Cause
The installation is corrupt and the Central Management server cannot initialize because of a critical file
missing from the deployment.
Action
Re-install SAP BusinessObjects Enterprise.
2010-11-0586
Administration & Security Error Messages
Missing critical system object type. Kind: %1. (FWB 00037)
Cause
The installation is corrupt and the Central Management server cannot initialize because of a critical file
missing from the deployment.
Action
Re-install SAP BusinessObjects Enterprise.
Deployment file directory %1 does not exist or contains no files. (FWB
00038)
Cause
The directory that contains the deployment's files is empty or could not be located.
Action
Ensure that the directory contains deployment files, or re-install the deployment.
Deployment file directory %1 does not exist or contains no key code files. (FWB 00039)
Cause
The directory containing the deployment files cannot be located or has no keycode initialization files
Action
Ensure that the directory contains keycode initialization deployment files. You may have to reinstall the
deployment to resolve this issue.
Cannot commit object(s). Object "%1" (ID: %2) is locked by session "%3" (ID: %4). (FWB 00040)
Cause
An attempt was made to modify an object that was locked by another session.
Action
Retry the operation at a later date. If the issue persists, eliminate the session identified in the error
message.
2010-11-0587
Administration & Security Error Messages
Cannot commit object(s). Object "%1" (ID: %2) is cascade-locked by session "%3" (ID: %4). (FWB 00041)
Cause
An attempt was made to modify an object that was locked by another session because an ancestor
object was cascade-locked.
Action
Retry the operation at a later time. If the issue persists, end the session identified in the error message.
Cannot delete object(s). Object "%1" (ID: %2) is locked by session "%3" (ID: %4). (FWB 00042)
Cause
You have attempted to delete an object that was locked by another session.
Action
Retry the operation at a later time. If the error occurs again, end the session identified in the error
message.
Cannot delete object(s). Object "%1" (ID: %2) is cascade-locked by session "%3" (ID: %4). (FWB 00043)
Cause
An attempt was made to delete an object that was locked by another session because an ancestor
object was cascade-locked.
Action
Retry the operation at a later time. If the issue persists, end the session identified in the error message.
Cannot lock object(s). Object "%1" (ID: %2) is locked by session "%3" (ID: %4). (FWB 00044)
Cause
You have attempted to lock an object that was already locked by anther session.
Action
Retry the operation at a later time. If the error occurs again, end the session identified in the error
message.
2010-11-0588
Administration & Security Error Messages
Cannot lock object(s). Object "%1" (ID: %2) is cascade-locked by session "%3" (ID: %4). (FWB 00045)
Cause
An attempt was made to lock an object that was already locked by another session because an ancestor
object was cascade-locked.
Action
Retry the operation at a later time. If the issue persists, end the session identified in the error message.
Cannot commit object(s). When committing object "%1" (ID: %2) with version %3, a conflict occurs with current version %4 over property "%5". Failed to merge changes. (FWB 00046)
Cause
A first-writer-wins commit failed due to an attempt to modify a property that another commit had modified
concurrently.
Action
Retrieve the object again and re-attempt the operation.
Cannot commit relationship attribute changes. When committing relationship %1 between parent %2 and child %3 with version %4, a conflict occurs with current version %5 over property "%6". Failed to merge changes. (FWB 00047)
Cause
A first-writer-wins commit failed due to an attempt to merge attributed relationship properties that another
commit had modified concurrently.
Action
Retrieve the object again and re-attempt the operation.
2010-11-0589
Administration & Security Error Messages
Cannot commit relationship attribute changes. When committing relationship %1 between parent %2 and child %3 with version %4, a conflict occurs with current version %5. (FWB 00048)
Cause
A first-writer-wins commit failed due to an attempt to replace an attributed relationship that another
commit had modified concurrently.
Action
Retrieve the object again and re-attempt the operation.
Cannot delete object(s) modified between query and commit. When deleting object "%1" (ID: %2) with version %3, a conflict occurs with current version %4. (FWB 00049)
Cause
A first-writer-wins commit failed due to an attempt to delete an object that another commit had modified
concurrently.
Action
Retrieve the object again and re-attempt the operation.
Cannot commit object(s). Since the object "%2" (Id - %3) was queried for, another user has changed the relationship "%1". (FWB 00050)
Cause
A first-writer-wins commit failed due to an attempt to perform an explicit-list relationship update of
relationship edges that another commit had modified concurrently.
Action
Retrieve the object again and re-attempt the operation.
2010-11-0590
Administration & Security Error Messages
Cannot commit object(s). The object "%1" (Id - %2) with version %3 is too old relative to current version %4 for a successful merge. Objects must be within %5 versions. (FWB 00051)
Cause
A first-writer-wins commit failed due to the committed object being too old, compared to the version
contained in the database.
Action
Retrieve the object again and re-attempt the operation.
Some properties were not merged. Committing object "%1" (Id - %2) with version %3 conflicts with current version %4. The following properties were not merged "%5". (FWB 00052)
Cause
A commit could not merge all changes successfully. Conflicts existed with changes made by another
commit concurrently.
Action
Verify whether the result of the failed merge is acceptable.
All CMSs in the same cluster have the same FIPS and SSL mode settings (FWB 00053)
Cause
A non-FIPS-compliant Central Management Server (CMS) has attempted to join a FIPS-compliant
cluster, or a CMS with SSL disabled has attempted to join an SSL-enabled cluster.
Action
Enable FIPS mode or SSL on for all Server Intelligence Agent nodes that use the Central Configuration
Manager.
Object ID number %1 has an invalid kind of %2. (FWB 00054)
Cause
You have attempted to create or update an object where the specified SI_KIND does not exist.
2010-11-0591
Administration & Security Error Messages
Action
Specify the name of an existing object for the respective KIND.
Object ID number %1 has an invalid prog ID %2. (FWB 00055)
Cause
You have attempted to create or update an object where the specified SI_PROGID does not exist.
Action
Specify the name of an existing object for the PROGID.
You do not have enough Role-Based User Licenses to add this user. You have %1 Role-Based User Licenses. (FWB 00056)
Cause
The user limit under a role-based license has been reached.
Action
Delete users from the system, or upgrade your license key.
You do not have enough Named User Licenses to log on to the system. You have %1 Named User Licenses. (FWB 00057)
Cause
Named users cannot log on to the deployment because there are not enough named user licenses
available.
Action
Upgrade your license key.
No authentication credentials were provided to the FRS. (FWB 00058)
Cause
You have not provided credentials to the File Repository Server (FRS). You are using an outdated FRS
client, but you have also specified -disablelegacyclients at the FRS command line.
Action
Use the most recent version of the FRS, or do not specify -disablelegacyclients.
2010-11-0592
Administration & Security Error Messages
The authentication credentials provided to the FRS were rejected by the CMS. (FWB 00059)
Cause
The logon token that identifies your user is invalid or has expired, authentication information could be
missing, or the user account may no longer be valid.
Action
Regenerate the logon token with the necessary authentication information for a valid user, and retry
the operation.
There are problems in linking the user to third-party user groups. (FWB 00060)
Cause
A third-party plugin is configured incorrectly.
Action
For more information, enable tracing.
The authentication credentials do not permit the operation. (FWB 00061)
Cause
Your user account does not have sufficient credentials to perform the file operation.
Action
Ensure that your user account has sufficient credentials and rights to the object.
The FRS credentials were rejected by the CMS. (FWB 00062)
Cause
The Central Management Server (CMS) has rejected the credentials of the File Repository Server
(FRS).
Action
Restart your CMS and FRS.
2010-11-0593
Administration & Security Error Messages
User not found (%1) (FWB 00063)
Cause
The user was not found, or the user is missing an alias.
Action
Ensure that the user exists and has a valid alias.
To copy data from a previous version, use the Upgrade management tool. For more information, see the Upgrade Guide. (FWB 00064)
Cause
The source and destination data sources must be of the same version.
Action
To copy data from a previous version, use the upgrade management tool.
Operation requires all CMS(s) in the cluster to be stopped. Please stop CMS %1 (id: %2). (FWB 00065)
Cause
Operation requires all Central Management Servers in the cluster to be stopped.
Action
Stop all of the CMS in the cluster.
System ID is empty. (FWB 00066)
Cause
The system ID is not configured.
Action
Configure the system ID.
2010-11-0594
Administration & Security Error Messages
Keystore is empty. (FWB 00067)
Cause
The keystore is not configured.
Action
Configure the keystore.
Alias is empty. (FWB 00068)
Cause
The alias is not configured.
Action
Configure the alias.
Default object with CUID (%1) has invalid or missing parent ID/CUID. (FWB 00069)
Cause
The Deployment File object contains a Default Object that has an invalid or missing reference to a
parent object.
Action
Check the Default Object specification to ensure that SI_PARENTID or SI_PARENT_CUID refers to a
valid object.
Default object with CUID (%1) has invalid or missing type information. Check value of SI_KIND. (FWB 00070)
Cause
The Deployment File object contains a Default Object that has invalid or missing type information.
Action
Check the Default Object specification to ensure that it has an SI_KIND and that the KIND exists in
the system.
2010-11-0595
Administration & Security Error Messages
Default object with CUID (%1) cannot be processed because it is invalid. Check assert log for details. (FWB 00071)
Cause
The Deployment File object contains an invalid Default Object.
Action
For more information on Default Object failure, see the Central Management Server assert log.
Attempt to set up sub-directory for namespaced default object files failed. Name: %1. Error: %2. (FWB 00072)
Cause
During initialization, the Central Management Server could not create a new directory for Server
Intelligence Default Objects.
Action
For more information, see the file system error message.
Trusted authentication is disabled (FWB 00073)
Cause
You have tried to use a feature that requires Trusted Authentication to be enabled.
Action
Use the Central Management Console to enable Trusted Authentication.
Invalid data (FWB 00074)
Cause
Invalid data has been sent to the Central Management Server.
Action
You must configure Trusted Authentication. For more information, see the
Enterprise Administrator Guide
.
SAP BusinessObjects
2010-11-0596
Administration & Security Error Messages
Default Object fragment from file %1 failed to be applied to object (Name: %2; CUID: %3). Check assert log for details. (FWB 00075)
Cause
A Default Object fragment could not be applied to the default object.
Action
Check the Central Management Server assert log for more information about the failure of the Default
Object fragment.
1.4.2 FWB 01000 - FWB 01999
The InfoObject {0} could not be found among related InfoObjects. (FWB
01001)
Cause
An InfoObject has referenced the ID of a missing InfoObject.
Action
Ensure that the relationships between server containers, services, servers, installations, and enterprise
nodes are correct.
Service {0} is not ready (FWB 01002)
Cause
A service cannot handle a request because the service is configured incorrectly.
Action
Configure the service correctly, and restart the server (if needed).
The resource for service {0} is temporarily unavailable. Please try later (FWB 01003)
Cause
A service cannot process a request because the service has reached maximum resource capacity.
2010-11-0597
Administration & Security Error Messages
Action
Wait for other users to stop sending requests, make the request to another server, or Increase the
maximum capacity of the service.
The CMS could not find a server object named {0}. The name used to start this server could be wrong (FWB 01004)
Cause
An Adaptive Processing Server (APS) queried a Central Management Server (CMS) for its configuration,
and the CMS responded that the server InfoObject that corresponds to this APS instance cannot be
found in the repository.
Action
The server friendly name that is used to start the APS instance is incorrect. Enter a valid name that
exists in the repository.
The service {1} could not start because service {0} could not start (FWB 01005)
Cause
A service could not start because one of the services it depends on could not start.
Action
Ensure that the processes the service depends on start properly.
The service {0} failed to start (FWB 01006)
Cause
A service could not start because one of the services it depends on could not start.
Action
Check the log file of the service, and then re-configure the service.
1.4.3 FWB 02000 - FWB 02999
2010-11-0598
Administration & Security Error Messages
A ClassNotFoundException error occured. (Exception message: {0}) (FWB
02001)
Cause
The program could not load a class through the specified string name because the definition of the
class is missing.
Action
Ensure that all required .jar files are included in the classpath.
A NoClassDefFoundError occured; exception message: {0} (FWB 02002)
Cause
The Java Virtual Machine or a ClassLoader instance has loaded a missing class definition.
Action
Ensure that all required .jar files are included in the classpath.
1.5 Security (USR) Errors
Security error messages include the following:
CategoryRange
SecurityUSR0006
You are not authorized to use Designer. (USR0006)
Cause
You tried to start Univserse Designer, but you do not have the necessary rights.
Action
An administrator can grant you the necessary rights.
2010-11-0599
Administration & Security Error Messages
2010-11-05100
Loading...