Infrared Digital Wildlife Camera
◎12MP&1080P ◎Time-lapse Video
◎Write protect ◎48pcs IR Lens
Model No.：Batman D2
CONTENTS
1. Quick Start Guide .................................................................... 1
Introduction ..................................................................... 1
1.1 Application ................................................................. 1
1.2 Battery ........................................................................ 2
1.3 SD Card ....................................................................... 2
1.4 USB Function .............................................................. 4
1.5 Attention .................................................................... 4
2. Camera Overview .................................................................... 6
2.1 Camera Front Structure .............................................. 6
2.2 Camera Internal Structure .......................................... 7
3. Quickly use the camera ............................................................ 7
3.1 How to start the camera quickly ................................. 8
4. Menu Function Table ............................................................... 9
5. Main Features and Parameters ............................................... 14
5.1 Main Features: ......................................................... 14
5.2 Technical Parameters ................................................ 16
6. Others .................................................................................... 19
6.1 Replay ....................................................................... 19
6.2 Details of Partial Function ........................................ 21
6.2.1 Timer ................................................................ 21
6.2.2 Language .......................................................... 21
6.2.3 Firmware Upgrades .......................................... 21
6.3 FAQ ........................................................................... 22
6.3.1 Please do the following checks if camera can not
start or work normally ............................................... 22
6.3.2 Factory Default Setting ..................................... 23
7. Warranty Policy ..................................................................... 25
Appendix I：Standard Packing List ............................................... 27
Statements ...................................................................................... 28
1
1. Quick Start Guide
Introduction
Batman D2 wildlife game camera (also called hunting camera/trail
camera) is a scouting device. It can be triggered by sudden change of
ambient temperature caused by moving game in a region of interest,
which is detected by a highly sensitive Passive Infra-Red (PIR) sensor,
and then take pictures or video clips automatically. The camera can
achieve more applications through Timer, Interval, PIR Sleep and other
function settings.
1.1 Application
Camera trap for hunting, animal or incident observation
Indoor/outdoor surveillance for domestic, office, warehouse, farm
or public use
Observing wild animals/plants growth process
For forestry bureau and forest public security to surveil and take
evidence of stealing hunting, etc.
Other evidence-taking works
Warning:
Please read the user guide carefully
before using this product to avoid
unnecessary loss!
Do not attempt to disassemble the
camera, non-product quality problems
and man-made damages will not be
covered under warranty!
2
1.2 Battery
This product can be powered by battery 5 or an external power
adapter.。
A． Battery-powered
Please use high-quality alkaline batteries, nickel-metal hydride
batteries or rechargeable batteries. The camera supports two groups
of battery-powered, each group of four batteries, in order to improve
the performance of the proposed installation of 8 batteries.
Note: The battery must be purchased by the user. Pay attention to
the positive and negative sequence of the battery during installation.
When not using the camera for a long time, remove the battery to
prevent leakage of the camera. When low battery, please replace the
new battery.
B．External power supply
This product supports 6V / 2A DC power adapter, solar power and
so on.
Note: When the battery is low, in the "TEST" mode, the
display shows a low battery prompt (the battery icon in the lower
right corner is empty and "low battery" appears in the center of the
screen).
1.3 SD Card
The camera uses SD card to store images, the maximum capacity
can support 32GB. To ensure optimum performance of the camera,
use an SD card with a speed of 10x or more. Please do not remove
the SD memory card, battery, and plug the power when the camera
3
is turned on!
Note: Before inserting an SD memory card, it is recommended
to format the SD card, turn off the SD card lock protection, and
insert the SD memory card correctly by the logo.
The following table lists the different capacity of the SD card can
shoot the number of pictures and video length (the value is for
reference only), we can choose to purchase the appropriate capacity
of the SD card.
Different capacity SD cards can store the number of images
2GB 4GB 8GB 16GB 32GB
Number of photos (sheets)
1MP 8930 17639 34472 71878 99999
3MP 3488 6890 13465 28077 54909
5MP 2178 4302 8407 17531 34284
8MP 1373 2712 5301 11054 21618
12MP 914 1806 3530 7361 14395
Video Length (hours)
1080P 0:08:22 0:16:32 0:32:19 1:07:23 2:11:46
720P 0:13:57 0:27:33 0:53:51 1:52:18 3:39:38
WVGA 0:18:36 0:36:44 1:11:49 2:29:44 4:52:51
VGA 0:24:59 0:49:21 1:36:28 3:21:09 6:33:22
10 seconds video number (segment)
4
1080P 50 99 193 404 790
720P 83 165 323 673 1317
WVGA 111 220 430 898 1757
VGA 149 296 578 1206 2360
1.4 USB Function
This product can be connected via USB to a computer or TV.
The camera is connected to the USB port of the computer via the
USB data cable, and the key is dialed to TEST. The camera displays
the "MSDC" character and the operation key is disabled.
In the "My Computer" to find a removable disk, this time through
the computer on the camera SD card to read and write operations.
The camera is connected to the RCA of the TV via the TV cable and
the camera function switch to the "TEST" test preview mode. Select
"REPLAY" to view the image file in the camera.
Note: After receiving the TV, the camera display
automatically turns off!
1.5 Attention
On “TEST” mode, camera will be auto power off while no keypad
controlling. Please switch to “TEST” mode again if you want to continue
to use.
Please keep power on during upgrade process. After finishes upgrade, it
5
needs to keep at least 5seconds before you can shut down or cut off
power, otherwise it may causes upgrade failure.
When install camera please make sure there are not moving objects in
3m area in front of lens such as branches, leaves, weeds, strings, color
ribbon and other objects which may fluttered in the wind to avoid
potential false triggers.
Please do not aim the camera at a heat source such as boiler, exhaust
vents and light, etc. Avoid mistaking photos or videos and shortening
stand-by time.
Please do not use the voltage and current does not meet or exceed
the requirements of the product of the external power supply, so as
not to cause damage to the camera.
The camera has a clock to keep the battery, the date and time
settings, will remain until the battery is dead. After the battery is
disabled, the date and time settings will be reset to the factory
settings after power failure, and need to be reset after each power.
6
2. Camera Overview
2.1 Camera Front Structure
7
2.2 Camera Internal Structure
3. Quickly use the camera
Switch：
1. Switch to ON, the camera into the work mode (into the work
mode, the work indicator will flash red and blue lights 8 times, the
display will show the countdown, the official entry into the work
mode, the display will close the display).
2. Switch to TEST, the camera into the test mode, you can manually
set the parameters, take pictures or video, playback of the memory
card photos and video.
3. Switch to OFF, the camera stops working.
8
3.1 How to start the camera quickly
9
4. Menu Function Table
Press "MENU" key to enter the menu, press ▲, ▼ key to move
the cursor to select various function options, "OK" key to confirm.
Press "REPLAY" to enter playback mode. Press the "EXIT" key to
return to the previous menu or exit the menu.
Menu function is related, part of the menu option will not appear
because of the relevant function and display as gray.
The bold text in the table is the default.
Parameters
Set options
(Bold=Factory default)
Function Description
Set Up
Mode
Camera/Video/
Camera+Video/
Time Lapse Video
In “Camera + Video” mode, first
take photos per shooting numbers,
then record video per video length.
"Time-lapse video" is a
combination of time in accordance
with the set shooting and
combined into a video.
Image Size
1MP/3MP/5MP/8MP/
12MP
Higher resolution produces better
quality photos, but creates larger
files that take more of SD card
capacity and longer time to write to
the SD card.
10
Shooting
No.
1/2/3/6
Camera takes multiple consecutive
photos according to user’s settings
per each trigger event.
Video Size
640*480P/720*480P/
1280*720P/
1920*1080P
Higher resolution produces better
quality videos, but creates larger
files that take more of SD card
capacity and longer time to write to
the SD card.
Time-lapse
Video Size
2592×1944P/
2048×1536P
In accordance with the set interval
to shoot, combined into a video.
Suitable for observation of plant
growth, starry changes,
engineering changes.
Video
Length
5s～59s，
1/2/3/4/5/6/7/8/9/
10 minutes
Videos are saved in AVI format
and able to display on most of
video media player.
Record
Audio
Off/On
If turned on, the video will
sound.
PIR
Interval
5～59 minutes
1～60minutes
When the camera senses the
shooting, the camera will not
trigger shooting during the PIR
11
interval. After this period of
time, PIR will resume waiting
for the trigger state.
PIR level Low/Normal/High
The user can set the sensitivity
of the infrared sensor as needed.
Timer
Off/On
Used to set the camera's working
time period, this setting period,
the camera will not work.
Time Lapse
Off / 3 seconds to 23
hours 59 minutes 59
seconds
The camera shoots at the set
interval.
Note: Turning on this function,
the camera will not start infrared
auto-sensing shooting.
Language
English and so on
Support multiple languages.
*Reference to 6.2.2 Language
Time&Date 01/01/2017 00:00 Set the camera's system time.
Stamps
Time&Date
Date
关
If turned on, the bottom of each
photo will show LOGO,
temperature, moon phase, photo
number. You can select the date,
time to display or display it
12
separately. When closed, all
stamps are not displayed.
Password
Set
Off/On 1234
4 characters, each character can
be arbitrarily selected in 0-9,
such as forget the password,
please contact the dealer.
Beep
Sound
Off/On
Turn the key on or off.
Format
Yes/No
Format SD Card
Device No.
Off/On BUSH
4 characters, each character can
be arbitrarily selected in 0-9, AZ,
the device number will be
written to the image file name of
the first four characters, when
browsing pictures, can help users
identify the camera is taken by
which camera taking pictures.
Default Set
Yes/No
Restore all settings to factory
defaults.
Version D2-01-26861-82
D2: model abbreviation;
01: language version;
13
26543: DSP version number;
82: MCU version number.
Playback
Delete
current file
Cancel
Delete
Delete current image
Delete all
files
Cancel
Delete
Delete all images
Slide Show
Auto replay all images, it will be
stop when press “OK” key
Protect
Lock Current/
Unlock Current/
Lock All/
Unlock All
Lock important images to avoid
deleting accidentally. If locked,
images can’t be deleted unless you
unlock them.
14
5. Main Features and Parameters
5.1 Main Features:
1）Photo Size：1MP/3MP/5MP/8MP/12MP
2）HD Video: 720P@30FPS, 1080P@17FPS, sounds recording can
be turned on or off.
3）In "Camera + Video" Mode, camera takes both pictures and video at
every trigger event.
4）Time-lapse Video: Camera take a picture based on programmed
interval time and it turns it into a video. This is very useful when
observe plants growing, flowering, birds building nest, stars
changing, housing construction etc.
5）48pcs IR LEDs, 850nm and 940nm for selection.
6）0.6s Trigger Time.
7）Build-in 2.4" TFT color screen.
8）Locking important image to avoid being deleted.
9）Take multiple consecutive pictures up to 6 photos.
10）When Timer setting is turned on, camera only works in specified
period every day.
11）PIR Sleep setting can avoid the camera shoot the same object
multiple times.
12）In Interval setting, the camera automatically and constantly takes
pictures/videos at specified interval. This function suits for unwatched
15
places, such as parking lot, courtyard etc.
13）Date, time, temperature, moon phase and battery power can be
stamped in the pictures.
14）7 operation buttons beep sound on/off available.
15）Support SD Card up to 32GB.
16）Extremely long in-field battery life (in standby mode, up to 8 months
with 8*AA batteries)
17）Alarm light flashing when battery power level goes low.
18）Playbacks zoom in 1-8 times.
19）Auto play in “Slide Show”
20）Device Number will be showed on image file name, this helps users
identify which camera captured the image when review it.
21）Lockable and password protected.
22）Color pictures at daytime, monochrome pictures at night, switched
automatically.
23）Serration design make camera easy to fix firmly.
24）Battery cover to prevent erosion from battery leakage which may
damage the camera.
25）Nine-rectangle-grid mode and auto play to view images.
26）Getting more accurate ISO through sensor, and the photo will be
more authentic.
16
5.2 Technical Parameters
Item Parameters
Mode
Camera
Video
Camera+Video
Time-lapse Video
Image Size
1MP：1280×960
3MP：2048×1536
5MP：2592×1944
8MP：3264×2488
12MP：4000×3000
Video Size
WVGA: 640x480
VGA: 720x480
720P: 1280x720@30fps
1080P: 1920x1080@17fps
Work Mode Day/Night, Switch automatically
Lens FOV＝50°, F=2.5, Auto IR-Cut
IR Flash 82 Feet/25 Meters
IR Setting 48 LEDs; 850nm or 940nm
LCD Screen 2.4" TFT Color Display
Operation Keypad 7 buttons
17
Beep Sounds On/Off
Memory SD Card(≦32GB)
PIR Level High/Normal/Low
PIR Sensing
Distance
82 Feet/25 Meters
PIR Sensor Angle 50°
Trigger Time 0.6 Seconds(When using 2GB SD card)
PIR Sleep 5 Seconds～60 Minutes, Programmable
Shooting Numbers 1/2/3/6 Photos
Protection
Lock partial or all photos to avoid being deleted;
Unlock
Video Length 5 Seconds～10 Minutes, Programmable
Camera + Video First take picture then Video
Playback Zoom 1～8 Times
Slide Show Yes
Stamp
On/Off, Temperature, Moon Phase, Logo, Time
and Date, Photo ID
Timer On/Off, Programmable
Interval 3 Seconds～24 Hours
Password 4 Digit Numbers
Device No. 4 Digit and 26 Alphabet set by yourself
18
Power Supply 4×AA, Expandable to 8×AA
External DC
Power Supply
6V/2A
Stand-by Current 330μA
Stand-by Time 4～8 Months(4×AA～8×AA)
Power
Consumption
160mA (+1140mA when IR LED lights up)
Low Battery
Alarm
4.6V
Interface TV-out, USB,SD card slot,6V DC External
Mounting Strap; Tripod Nail
Waterproof IP66
Work Temperature -22～＋158°F/-30～＋70°C
Work Humidity 5%～95%
Certification FCC＆CE＆ROHS
Dimensions 148×99×78（mm）
Weight 320g
19
6. Others
6.1 Replay
With “REPLAY” button and other buttons can review/play/delete photos
and videos in SD card; Photos can zoom in/zoom out/move;
Nine-rectangle-grid mode to view images; Lock/unlock photos; Slide
show, etc.
Image Review:
After press “REPLAY” button through ◄/► can review photos/videos in
SD card.
Zoom/Move and Nine-rectangle-grid:
When review photos, after press “ZOOM” button through ▲/▼
can zoom in/out photos. When zoom out photos to minimum size,
photos will show in nine-rectangle-grid mode.
When zoom in photo, after press “MOVE” button through
▲/▼/◄/► can check different parts of the photo.
Continue pressing “ZOOM/MOVE” button can switch between
“ZOOM” and “MOVE”.
On Nine-rectangle-grid mode, through ▲/▼/◄/► can quickly
move to chosen photos, press “OK” to check the photo.
Playing Video:
When review videos, operation tips will show on the bottom of TFT
screen.
Press “OK” to play/pause video.
Press ▲/▼ to stop play video.
Press ◄/► to move video forward or backward in 2 times,4 times, 8
20
times play speed.
Slide Show
Auto play images in the way of slide show. On “Replay” mode, press
“MENU” button and choose “Slide Show”, through ◄/► can set
interval time “3 seconds”, “5 seconds”, “8 seconds”.
Note: When auto play images, the video files will only show the first
scene, not play the whole video.
Image Lock/Unlock
If locked, images can’t be deleted unless you unlock them.
On “REPLAY” mode, press “MENU” button and choose “Protect”,
through ◄/► can set “Lock Current”, “Unlock Current”, “Lock All”,
“Unlock All”.
Note: On “Replay” mode, above functions can return to previous menu
by pressing “EXIT”. Quickly exit “Replay” mode by pressing
“CAMERA”/ “VIDEO" to take photos or videos.
21
6.2 Details of Partial Function
6.2.1 Timer
Set camera to work within specified time period every day. Outside the
time period the camera will not be triggered or take photos/videos, it
supports 2 groups of timer set.
Default set:
Off, “00:00——00:00”
Off, “00:00——00:00”
For instance: Set camera starting time in 8:00 to 10:00am and 15:30 to
18:00pm:
On, “08:00——10:00”
On, “15:30——18:00”
6.2.2 Language
System language, Users can choose different language version to
purchase.。
Languages as below:
English，Deutsch，Dansk，Suomi，Svenska，Español，Français，
Italiano，Nederlandes，Português。
Default setting is “English”. User can view version number of different
language on official website.
6.2.3 Firmware Upgrades
The manufacturer reserves the right to upgrade the camera and the
firmware. Users can upgrades firmware through SD card (SD card
capacity less than 32GB)
22
Follow the steps below to implement the upgrades:
1. Ready formatted a SD card;
2. Copy the files of the new version of the software files
named "ISP_SD.bin" and "Rom_Code_D2_01 _ ***** **. Bin" into the SD card root directory.
3. Insert SD card to camera, while press "OK" button switch
camera to “TEST” mode, after blue light flashes loosen the
“OK” button. The screen flashes then go black, and the blue
indicator flashes until restart.
4. Upgrading is underway when the screen is black, please
don’t turn of the power. Otherwise users need to do the
upgrades again.
5. Restart and check if the new version number is the same as
the old one, to confirm upgrade process succeed.
6.3 FAQ
6.3.1 Please do the following checks if camera can not
start or work normally
No battery;
Battery loaded reversely;
Run out of battery;
Battery is not in conformity with the specifications;
Not switch camera to “ON” mode;
Not insert SD card;
SD card is full or damaged;
SD card capacity exceed 64GB;
Sensitivity of PIR sensor too low.
23
6.3.2 Factory Default Setting
Item Parameters
Work Mode Camera
Picture Size 5MP（2592×1944P）
Shooting Numbers 1
Video Size 1280x720P
Time-lapse Video
Resolution
2592×1944P
Video Length 5 Seconds
Video Recording On
PIR Sleep 1 Minute
PIR Level Middle
Timer Off
Time lapse Off
Language Simplified Chinese
Time & Date 01/01/2017 00:00
Stamp Time & Date
Password Setting Off
Beep Sounds On
Format No
24
Device No. No
Restore Factory
Defaults
No
Version D2-01-26861-82
25
7. Warranty Policy
We value our customers very highly and would like to ensure that our
products and service are always of a top standard. However, if you are
experiencing issues with your Bushwhacker products, please take a
moment to read through the information below to establish whether your
products are covered under the warranty.
WARRANTY
The warranty suits for all authentic Bushwhacker products. If your
purchasing product with any quality problem, you can obtain one
year warranty.
In the case of free warranty, in case of product failure, please contact
our after-sales department for fault diagnosis. When we receive the
repair machine, will make a judgment for free repair or for your free
replacement of the product (the same model or the same grade
products).
EXCLUSIONS
This warranty doesn’t cover the following case:
The camera manufacturer can provide extra service for your camera after
the warranty expiration, but the customer have to be responsible for extra
charges on parts, labor and shipping costs therefore brought.
1. Failure due to improper installation, improper use, improper
26
operation, power failure, battery leakage, natural disasters,
environmental causes and other factors.
2. The product is privately removed, changed, the original serial
number is altered or torn.
3. Normal wear during use
4. Damage in process of use
5. Product lost.
6. Out of one year warranty.
Please keep the warranty card for guarantee to keep in repair.
The warranty policy applies to the authorized dealer by
Bushwhacker and buyer who purchase directly from factory only.
27
Appendix I：Standard Packing List
Part Name
Quantity
Digital Camera
1
USB Cable 1
TV Cable 1
Strap 1
Manual 1
Warranty 1
28
Statements
1. The manufacturer reserves the right to amend the content due to
editing or typographical errors, product upgrades and other factors
which may causes discrepancies. Amendments will be applied to
latest user’s manual. These are subject to change without prior
notice.
2. The manufacturer takes no responsibility for any illegal usage.
Please comply with local laws and regulations.
3. The manufacturer takes no responsibility for user’s data loss.
4. The manufacturer takes no responsibility for any losses and
casualties resulting from misusing products.
Loading...