Bushnell BACKTRACK 360200, BACKTRACK Point 5 360200 Quick Start Manual

N E V E R G E T L O S T A G A I N

Lit# 98-1586/04-10

Model #: 360200

GPS

MADE SIMPLE!

5

Quick Start Guide

2

Control & Display Guide

Note: Control Buttons are located on the sides of the BackTrack

Battery
Indicator

Satellite Locked
Icon

Distance to Location

Direction to
Location

Location Memory Icon

(1 of 5 shown)

Local Time

POWER Button

DOWN Button

UP Button

MARK Button

Full Instruction Manual available online at:

www.bushnell.com/manuals/gps

3

1. Open the battery cover and insert two AAA batteries.

2. Hold POWER button (until the display appears) to turn on the BackTrack. When satellite icon stops blinking, it is ready
to use (be sure you are outdoors with a clear view of the sky).

Take the

BackTrack

Outdoors

Unlock Position

Lock Position

GPS Satellite

Reception Icon

Hold POWER Button

4

3. The Location screen will display when first turned on. The time is displayed but may need to be adjusted for your time
zone. Go to Settings Mode to change the time (as well as other units of measurement). Press UP button on right side
of unit to access Settings Mode.

4. Press the MARK button to go to the Time Set screen. Press the UP or DOWN button to set the correct hour. The
minutes are automatically set via GPS satellite data. After you’ve set the hour, press MARK to confirm the setting.

Settings Mode

Press UP

Press MARK

Time Set Screen

DOWN

UP

Press the UP/DOWN
buttons to set the hour,
then press MARK to
confirm and return to
Settings Mode

Icons indicate button functions
in Setup mode

Time Set

Temp Units

Hour Format
Distance Units