Bush S642F1, S626, S626D, S632D, S632F Instruction Manual

26 /32 /42 Digital LCD Television
INSTRUCTION MANUAL

Customer helpline:0845 604 0105

Contents

P.25

P. 3 8
P.

4

0

P. 4 4
P. 4 5

P.02
P.03
P.04
P.05

P.06

01 Safety Warnings

02 About your LCD TV

03 Getting Started

04 Using the features

05 Reference Sections

P.08
P.09

P.11

P.12
P.13

P.18

P.16

P.19
P.20

P.21
P.23

P.27

P.29

Welcome
Important information
Safety notice
Electrical connections

Get to know your TV
Get to know your remote control
Connecting your TV
Preparation of your remote control

Setting up
Tuning your TV
Common interface
Using your TV
Adjusting picture settings
Adjusting sound settings
Function settings
Time settings
Lock menu settings
Shortcut menu display

Teletext function
USB mode
Using External USB Disk For Recording
Using your DVD player(certain models only)

Troubleshooting
Specification

P.31

06 Product Guarantee

P.46

Product guarantee

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

WELCOME

01 Safety Warnings

Thanks for buying this 26"/32"/42" HD Ready Digital LCD TV.
This guide will help you set up and begin using your TV.

First, check the contents of your box with the parts checklist below:
26"/32"/42"HD Ready Digital LCD TV
Remote control
AAA battery x2
Instruction Manual
Quick Start Guide

Now you can get started!

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT
PUT THE TV SET NEAR SOURCES OF HUMIDITY.
DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH
OR DAMAGE THE LCD SCREEN. AVOID CONTACT WITH OBJECTS
THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND
COULD LEAD TO INJURY OR PRODUCT DAMAGE. REFER ALL
SERVICING TO THE CUSTOMER HELPLINE.

IMPORTANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER SERVICEABLE
PARTS INSIDE. FOR ANY PROBLEMS, REFER SERVICING
TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING
ARROW SYMBOL IN THE TRIANGLE: THIS SYMBOL
INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS
DANGEROUS TO MAKE ANY KIND OF CONTACT WITH ANY
INSIDE PART OF THIS PRODUCT.

THERE IS A EXCLAMATION MARK IN THE TRIANGLE:
THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS
BEEN INCLUDED WITH THIS PRODUCT.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

For your protection please read these instruction completely and keep this manual
for future reference
Please ensure that the set has adequate ventilation.
Do not place the set near a heat source or in direct sunlight.
Do not put the unit near water or oil as it may cause a fire.
During thunderstorms, unplug both the antenna and power plug to prevent damage.
Do not use a damaged power plug or put the power supply near a heat source as it may
cause electric shock or fire.
To prevent potential fire, do not overload an electrical outlet with too many plugs.
Place the set on a level surface to prevent it from tipping and potential damage.
Do not remove the cover of the set or try to service your TV. This may result in electrical
shock or fire. All service work must be completed by an authorised technician.
If there are any abnormal sounds or smells from the unit, unplug it immediately and
contact an authorised service provider.
To prevent fire, do not use or store any flammable materials near the unit.
To prevent fire, do not place the unit near a damp wall.
To prevent electric shock, ensure that any external antenna connected to the set is clear
of contact with any power lines.
Do not plug/unplug the unit while your hands are wet. This may cause an electric shock.
Please ensure a solid connection with the AC wall socket in order to avoid shock and
potential fire.
To prevent electric shock or fire, please prevent rain from entering the set along the wire
connected to the outside antenna.
When cleaning, please unplug the unit. Use a soft cotton cloth. Do not use any abrasive
cleansers, and prevent water from entering the set.
If any plugs or input wires are dirty, unplug the set and clean them. This will prevent the
risk of electric shock or fire.
If the set is not going to be used for an extended period, unplug the unit from the main
power.
Moderate climates used only.
Replace the battery by the equivalent or same type. In case of explosion don't throw
battery to fire. Dispose the battery according to local regulation.
A warning that excessive sound pressure from earphones can cause hearing-loss.

The apparatus should not be exposed to dripping or splashing and no objects filled with
liquids, such as vases should be placed on the apparatus.

The mains plug is used for disconnecting the device, make it easily accessible.

Do not use any accessories that are not recommended by the manufacture.

SAFETY NOTICE

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

BLUE OR BLACK
NEUTRAL (N)

BROWN OR RED
LIVE (L)

ELECTRICAL CONNECTIONS

The colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:

WASTE ELECTRICAL PRODUCTS SHOULD NOT BE
DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE
RECYCLE WHERE FACILITIES EXIST. CHECK WITH
YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.

Before connecting, check that voltage indicated on the appliance (button of the appliance)
corresponds with the main voltage in your home. If this is not the case, consult your dealer
and do not use.
This appliance may be fitted with a non-rewirable plug. If you need to change the fuse in
a non-rewirable plug, the fuse is lost or damaged, the plug must be used until a
replacement is obtained (available from the appliance manufacturer).
If the plug has to be changed because it is not suitable for your socket, or becomes
damaged, it should be cut off and appropriate plug fitted following the wiring instructions.
The plug removed must be disposed of safety as insertion into a mains socket is likely to
cause an electrical hazard.
This equipment must be disconnected from the mains when not in use. Do not allow
this unit to be exposed to rain or moisture.

For your own safety read the following instructions carefully before attempting
to connect this unit to the mains.

You should only plug the appliance into a 150V-240V AC,50/60HZ supply, Connecting it
to other power sources may damage the appliance.

The wires in this mains lead are coloured in
accordance with the following code:

Blue=Neutral
Brown=Live

IMPORTANT

Caution

To prevent electric shock disconnect from the mains before
removing the cover

The blue wire must be connected to the terminal marked with the letter N or coloured black.
The brown wire must be connected to the terminal marked with the letter L or coloured red.
If a 13 Amp (BS 1363) fused plug is used it must be fitted a 3A fuse conforming to BS 1362
and be ASTA apporved. If in doubt contact a qualified electrician.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

About your LCD TV

GET TO KNOW YOUR TV

USB

2

1REC

17.OPTICAL

Front control panel

Source button

Menu button

Volume up/down button

Program up/down button

Power button

1. YPbPr input

2. YPbPr AUDIO input

3. DVI AUDIO input

4. ANTENNA input

5. HDMI3 input

6. S-VIDEO input

7. EARPHONE output

8. HDMI1 input

9. HDMI2 input

10. AV-VIDEO input

11. Common Interface

12. SCART1 input

13. VGA AUDIO input

14. SCART2 input

15. VGA input

16. USB

COMPONENT IN

HDMI3

VGA IN

ANT IN

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

GET TO KNOW YOUR TV WITH DVD

17.OPTICAL

Front control panel

1. YPbPr input

2. YPbPr AUDIO input

3. DVI AUDIO input

4. ANTENNA input

5. HDMI3 input

6. S-VIDEO input

7. EARPHONE output

8. HDMI1 input

9. HDMI2 input

10.AV-VIDEO input

11. Common Interface

12.SCART1 input

13.VGA AUDIO input

14.SCART2 input

15.VGA input

16.USB

Source button

Menu button

Volume up/down
button

Program up/down
button

Power button

USB

2

1REC

COMPONENT IN

HDMI3

VGA IN

ANT IN

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

When using the remote control, aim it
towards the remote sensor on the TV

Stand By

DVD Menu / REC

DVD open / close

Picture Mode

Sound Mode

Call Screen Display

Sleep button

DTV Audio / NICAM / DVD Audio

Aspect Ratio Control button

Channel list button

Subtitle button

Program Number Channel selection

Source Exchange

Q.VIEW / Swap Channel

V+/V- : Volume selection

P+/P-: Channel selection

Mute

Menu button

GUIDE button (only for DTV)

Favourite list button

OK button

Cursor Mover button

Back button (only for USB)

Exit Screen Display

REPEAT

(only for DVD , USB , REC & Timeshift) /

CANCEL button

Zoom (only for DVD &USB)/

Teletext index(only for

TV) / REC index

Play / Pause button (only for DVD &USB) / Timeshift

Stop (only for DVD, USB, REC & Timeshift)

Fast Reverse (only for DVD, USB, REC & Timeshift)

Fast Forward (only for DVD, USB, REC & Timeshift)

Previous (only for DVD, USB, REC & Timeshift)

Next (only for DVD, USB, REC & Timeshift)

DVD Set up / Text

DVD Title / Teletext Mix

DVD Search / Teletext Subcode

DVD 10+ / Teletext Hold

DVD Program / Teletext Reveal

DVD A-B Repeat / Teletext Size

DVD Call / Teletext Mode

DVD Angle /Teletext Time

NOTE:RED button ,GREEN button
BLUE button and YELLOW button are fast
text button in analog signal .Function
button in DVBT (just reference the OSD)

SCREEN

SCREEN

STOP

.

GET TO KNOW YOUR REMOTE CONTROL

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

LR YPbPr

DVD

CONNECTING YOUR TV

ANTENNA CONNECTION

Connect your aerial to the side of the TV into the ANTENNA IN socket.

IMPROVE YOUR SIGNAL

To improve picture quality in a poor signal area, use a signal amplifier
(not supplied).

CONNECT YOUR PC TO THE TV

You can use your TV as a monitor for your personal computer by connecting it
with a VGA cable (not supplied).

1.Read your computer user guide and check it has a VGA connector.

2.Turn the power off on your TV and PC.

3.Connect a D type 15-pin VGA interface cable to the VGA video interface
connector on the PC. Connect the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the VGA connectors and connect
the audio cable (not supplied) to the audio input socket on the back of the TV.

4.Turn on the power of the TV firstly and then the PC.

5.Press the button on the TV or TV remote control to set the video input mode
to VGA.

6. Once the image shows, if there is noise present, change the VGA mode to
another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear.

CONNECT A DVD PLAYER TO YOUR TV

Connect the DVD video outputs (Y, Pb, Pr) to the
COMPONENT (Y, Pb, Pr)
IN socket on your TV.
1 . Turn on the DVD player and insert a DVD.
2 . Press the button to select .
3 . Refer to the DVD player user guide for operating
instructions.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

CONNECT A DVD PLAYER OR VCR TO YOUR TV

There are two ways in which you can connect a DVD player or VCR to your TV.
Make sure that both the TV and DVD player or VCR are switched off before you
connect them.

Connection Option 1

1.Connect the audio and S-VIDEO cables from the VCR output jacks to the TV
input jacks.

2.Insert a video tape into the VCR and press PLAY on the VCR.

3.Turn on the power of the TV first, then the VCR.

4.Press the SOURCE button on the TV to set the video input mode to S-VIDEO.

Connection Option 2

1.Connect the AV DVD/VCR outputs to the AV IN socket on your TV.

2.Press the SOURCE button on the TV to set the video input mode to AV.

SCART INPUT

1.Connect the scart lead from the external device (DVD player, Set-top box
or games console) to the TV scart socket.

2.Press the SOURCE button to select SCART mode.

3.Press the PLAY button on the external device.

HDMI INPUT

1.Connect the cable from the HDMI device to the TV HDMI socket.

2.Press the SOURCE button to select HDMI mode.

3.Refer to the HDMI device user guide for how to operate.

MOUNT YOUR TV ONTO THE WALL

You can mount your TV onto the wall by using a wall bracket (not supplied).
Use M4/M6 machine screws (4 pcs) to screw the TV onto the bracket (not
supplied).

BATTERY INSTALLATION

1.Place the remote control face down, then open
the cover of the battery compartment.

2.Install two AAA batteries. (The + and- symbol
of the battery must match with the marks on the
remote).

3.Close the cover of the battery compartment.

BATTERY CAUTION

Confirm there is no object between the remote
control and the remote sensor of the TV set.

Sunshine or other strong light will interfere with
the signal sent by the remote control. In this
situation turn the TV set to avoid the direct light
source.

Do not put the remote control in direct heat or in
a damp place as you may damage the remote.

Please use two AAA 1.5V batteries. Do not mix
battery types. Install the batteries at the correct
polarities. Do not use rechargeable batteries.
If your TV is to be stored for a period of time,
remove the batteries from the remote control.

PREPARATION OF YOUR REMOTE CONTROL

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

03 Getting Started

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

LOCATION

You will need to place your TV near your plug socket (so the power cable can comfortably
reach) and within reach of your aerial socket or extension lead.

CONNECTION

1. Insert your TV aerial lead into the Antenna input at the side of the TV.

2. Insert the batteries into the remote control. Make sure they are inserted the right
way around, matching the polarity as indicated inside the battery compartment.

SWITCHING YOUR TV ON

1.Press the STANDBY button on the right side of the TV once. A red flashing light will
appear in the corner of the screen.

2.Press STANDBY on the remote control. The TV will turn on and the red light will turn
blue. This may take a few moments.

3.Select your chosen language when prompted from the list that will appear on
screen. Use the button to scroll to the language you want and press to confirm.

Setting up

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

1. Press MENU button.

2. Press button to select Tuning menu, press button to enter.

3. Press button to select Country item.
Press button to select you needed.

4. Press button to select Auto Search item, press OK button to
enter.
Press button to select the OK option, and press OK button
to start searching.
Press the MENU button ,you can choose to skip the TV /DTV
Search or not.

5. Press EXIT button to stop auto search during searching.

Note: It may take a few moments to complete the Auto

Search.

1. Press MENU button.

2. Press button to select Tuning menu, press button to enter.

3. Press button to select Digital Manual Search item,
press button to enter.

4. Press button to select the Channel.
Press OK button to start searching.

5. Once a channel is located, you can press OK button to save it.
Press EXIT button to exit.

DIGITAL MANUAL SEARCH

If you have attached a DVD player or similar external device
to the TV, you will need to tell the TV to display the content
from it. Simply press SOURCE which will bring up the source
menu in the left corner of the screen, Use the and button
to highlight the required source and press OK select.

For details of how to plug in other equipment see GET TO KNOW
YOUR TV on page 6.

AUTO SEARCH

TUNING YOUR TV

SWITCHING TO AN EXTERNAL SOURCE OTHER THAT TV

Input Source

TV

AV
SCART1
SCART2
S-Video

Component1
Component2

PC
HDMI1
HDMI2
HDMI3

USB

TV

AV
SCART1
SCART2
S-Video

Component1
Component2

PC
HDMI1
HDMI2
HDMI3

USB

Input Source

TV

AV
SCART1
SCART2
S-Video

DVD

Component

PC
HDMI1
HDMI2
HDMI3

USB

TV

AV
SCART1
SCART2
S-Video

DVD

Component

PC
HDMI1
HDMI2
HDMI3

USB

OK

OK

OK

OK

OK

OK

Menu

OK

EXIT

OK

MENU

OK

OK

OK

OK

OK

OK

CANCEL

OK

OK

OK

OK

OK

OK

Menu

OK

UHF CH 26

OK

OK

OK

OK

OK

OK

Menu

OK

EXIT

SAVE

Sound System

Current CH

Press button to select the channel number to edit.

Storage To

Press button to select the program number you
want to storage to.

Fine tune

Press button to select "Sound System", then press
button to select the correct sound system.

1 Repeat above steps 1-3, then press button to select
the Fine Tune item.
2 Press button repeatedly to carry out fine tune, till the
best picture and sound are obtained, then loosen the button.

If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless reception
is poor.

Analog Manual Search

Follow the below steps when you need to have a manual search.

1. Press MENU button.

2. Press button to select Tuning menu, press button to enter.

3. Press button to select Analog Manual Search item,
Press button to enter.

4. Press button to select Search item, press button is used
to select the higher frequency channel.
Press button is used to select the lower frequency channel.

5. And then select Storage To, press button to select the position
number you want the channel on. Once a channel is located,
you can press red button to save it. Press EXIT button to exit.

TUNING YOUR TV

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

OK

OK

OK

OK

OK

OK

Menu

OK

NAME

MOVE

SKIP

FAV

Channel Edit

Using this function ,you can rename, move, set favorite
channel and skip the channel in the analogue mode.

1.Press MENU button.

2.Press button to select TUNING menu, press button
to enter.

3.Press button to select CHANNEL EDIT item,
Press button to enter the sub-menu.You can press red,
green , yellow or blue button to enter the menu you need.

RENAME

1.Press button to select the channel , and press green
button to rename.

2.Press button to select the number position of channel
name, Press button to select number.

3.You can press the EXIT button to cancel the changes
at anytime.

NOTES:The RENAME function is only available in ATV program.

MOVE

1.Press button to select the channel any press yellow button to select the position.

2.Press button to select the number position you want to remove to, press
yellow button to confirm.

3.You can press the EXIT button to cancel the changes at anytime.

Setting favourite channel

1.Press button to select the channel ,press Red button to set your favourite channel.

2.You can press the Red button to cancel the changes at anytime.

3.Press FAV button on the remote control and Favourite List will be displayed.

4.Press button to select the channel , and press OK button to enter.

SKIP

1.Press button to select the channel and press blue button to skip the current channel.

2.You can press the blue button to cancel the changes at anytime.

GUIDE (Electronic Program Guide)

Using this function ,you can access the DTV program
information

1.Press MENU button.

2.Press button to select TUNING menu. press
button to enter.

3.Press button to select the guide item.
Press OK button to enter the submenu, the electronic
program guide is displayed.
You can quickly call up Guide menu by GUIDE
button on the remote control.

Notes: Only DTV mode.

TUNING YOUR TV

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

BBC ONE Wales

INFO

Record

Schedule

DATE REMIND

OK

OK

OK

OK

OK

OK

OK

Menu

OK

OK

OK

OK

OK

OK

OK

Menu

OK

COMMON INTERFACE

The common interface (CI) slot is designed to
accept the Conditional Access (CA) Module and
Smart card in order to view the pay TV programmes
and additional services. Contact your Common
Interface service provider to get more information
about the modules and subscription. Please noted
that CA modules and smart cards are neither
supplied nor optional accessories from us.

Warning: switch off your TV before any module is inserted in the
Common Interface slot.

1 Insert the CAM correctly, then Smart Card to the
CI slot that is located at the side of the TV.

2 Turn on the TV and it will display the below
message if the CA module is detected. Wait
for few moments until the card is activated.

3 Press the MENUbutton to display the Main
Menu and use the and button to highlight
the "Common Interface" line and press
the "OK" button.

4 Detailed information on the CI card in use is displayed.

5 Press OK button to access the card menu. Refer to the module
instruction manual for setting details

6 When module is removed, the following message will appear on
the screen.

OK

OK

OK

OK

OK

OK

Menu

OK

CI module removed

Main Menu
Module information
Smart card information
Language
Software Download

Press OK to select,or Exit toquit

CI Module Insert

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

OK

OK

OK

OK

OK

OK

Menu

OK

OK

OK

OK

OK

OK

OK

Menu

OK

Software Update function

When you get the updating news from the TV shop's web,
you can update the operating software using the Download
menu. The data for various units are transferred consecutively
on a special receiving channel.

You need to search the channel with updating code stream.

Note: You can get information from the TV shop or internet.

1 Press MENU button.

2 Press button to select TUNING menu,
press button to enter.

3 Press button to select Software Upgrade item.

4 Press button to set it as On. The default is Off

5 If the updating code stream of the channel is suitable for
your set, Do System Update option can be selected. Otherwise
the Do System Update option is grey and cannot be selected.

6 Press button to select the System Update option and
use OK button to enter. Then the TV will restart and search
the upgrade information.

NOTES: If the upgrade information is received, the TV will begin

to upgrade. Or else, the TV will be back the DTV source.

7

you can press EXIT button to cancel the download

and your TV set will be standby.

8 After the download has finished, your TV set will enter burning
state and the indicator light is shining. The menu 4 of right appears.

The set will be standby when the update is completed.

Load the receiver identification. This process may also take

several minutes.

Operation

Are you sure?

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

USING YOUR TV

How to select the TV program

1.Using Program number button Enter the channel number with the number keypad on
the remote control.

2.Using P+/P- button
Press the P+/P- button to select a channel number.

HOW to adjust volume

Press V+/V- button on the remote control or the side of the TV to adjust the volume level.

CH.LIST function

Press CH.LIST button on the remote control will display Channel List menu, and then
press button to enter.
Press button to select the channel, and then press OK button to enter.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Contrast

This will adjust the intensity of bright parts in the picture but keep
the dark parts unchanged.

Brightness

This will adjust the light output of the complete picture, which will
mainly affect the darker areas of the picture.

Colour

This will adjust the saturation level of the colours to suit your personal
preference.

Sharpness

This will adjust the sharpness of fine details in the picture.

Tint

Allows you to select the colour mix (Tint) of the picture.

Note: The Tint function is only available in NTSC mode.

Mode

This will select the picture mode. Select Standard/Mild/User/Vivid according to the program.

Colour temperature

This will increase or decrease Warm (red) and Cool (blue) colours to suit
personal preferences.
Select Cool to give the white colour a blue tint, Normal to give the white
colour a neutral tint, Warm to give the white colour a red tint.

Noise Reduction

Automatically filters out and reduces the image noise and improves picture
quality when receiving weak video signals.
Select Off/Low/Standard/High according to the image noise.

Reset

To recover to the default value.

You can quickly select the desired mode by P.MODE button on the remote control.

1. Press MENU button.

2. Press button to select Picture menu,

3. Press button to select the item requires adjusting.

4. Press button to adjust the selection item.

5.

press button to enter.

When you are satisfied with your choice, press the EXIT
button to return to normal viewing or press MENU button to

return to the previous menu.

Changing the Picture Setting

OK

Menu

ADJUSTING PICTURE SETTINGS

Menu

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Balance

This will adjust the output of the right and left speakers to obtain the best
stereo reproduction for your listening position.

Mode

This will select the sound mode.
Press button to select Standard/Music/Theater/User according to the program.
You can quickly select the desired mode by S.MODE button on the remote control.

AVL (Automatic volume control)

This will reduces the differences in volume level among broadcasters.

SRS TS XT

This will control the Woofer output.
Press button to select SRS TS XT.
Press button to set SRS TS XT as OFF, ON.

Equalizer

This sound setting can be adjusted to suit your personal
preference.

Audio Languages

Press button to select Primary/Secondary item, and then
press button to select the languages you needed.
Press button to select Close item, Press OK button to close it.

Note: The Audio Language function is only available
in DTV mode.

Reset

To recover to the default menu setting.

OK

OK

OK

1. Press MENU button.

2. Press button to select Sound menu,

3. Press button to select the item requires adjusting.

4. Press button to adjust the selection item.

5.

press button to enter.

When you are satisfied with your choice, press theEXIT
button to return to normal viewing or press MENU button to

return to the previous menu.

Menu

Menu

ADJUSTING SOUND SETTINGS

Changing the Sound Setting

OK

OK

Menu

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

1. Press MENU button.

2. Press button to select Sound menu,

3. Press button to select the item requires adjusting.

4. Press button to adjust the selection item.

5.

press button to enter.

When you are satisfied with your choice, press theEXIT

button to return to normal viewing or press MENU button

to return to the previous menu.

Language

To select the menu language.

Subtitle Language

To select the Subtitle language.

Display Mode

To set the picture proportion, press button to select 4:3/Zoom1/Zoom2/Wide/16:9/Auto.
You can quickly select the desired mode by ARC button on the remote control.

4:3 mode

Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray
bars appearing at both the left and right sides.

16:9 mode

Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to
fill the entire screen.

Zoom1

Choose Zoom1 when you want to view the picture without any alteration. However, the
top and bottom portions of the picture will be cropped.

Zoom2

Choose Zoom2 when you want the picture to be altered, both vertically extended and
cropped. The picture taking a halfway trade off between alteration and screen coverage.

Wide

Choose Wide when you want to adjust the picture in a non-linear proportion, that is, more
enlarged at top sides and no alteration, at bottom side.

This will select the character background colour.

Note: The Blue Screen function is only available for ATV mode.

Blue Screen

Recorder

To recorder the DTV program.
Details of Recorder are described in the page of 38.

SCART Input

When you use the SCART2 input ,make sure
the input source is AV or S-VIDEO,and set the SCART INPUT option.

FUNCTION SETTINGS

Menu

OK

OK

OK

Time Out

To s
Each press of button repeatedly to select the number of
preset minutes, the Time will be set in sequence: off,10sec,15sec,
30sec,45sec,60sec.

will be set in sequence:

Reset

OSD

et how long you want the menus to appear on-screen.

OSD T

To set the transparency background of OSD,thetransparency

To recover to the default value.

ransparency

Off,25%,50%,75%,100%.

OK

OK

OK

Menu

FUNCTION SETTINGS

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

1 Press MENU button.
2 Press button to select Time menu, press button to enter.
3 Press button to select Clock item, press button to enter
setting.
Press button to select hour or minute, press button
to adjust the value.

1 Press MENU button.
2 Press button to select Time menu, press button to enter.
3 Press button to select Off Time item, press button to
enter setting.
Press button to select Repeat option, and then press
button to set it on.
Press button to select hour or minute,
Press button to adjust the value.

When the off time has arrived, the TV set will enter into standby mode.

Clock

Off Time

1 Press MENU button.
2 Press button to select Time menu, press button to enter.
3 Press button to select On Time item, press button to
enter setting.
Press button to select activate option, and then press
button to set it On.
Press button to select hour or minute,
Press button to adjust the value.

When the on time has arrived, the TV set will switch on automatically.

On Time

Date

1 Press MENU button.
2 Press button to select Time menu, press button to enter.
3 Press button to select Date item, press button to enter setting.
Press button to select the option, and then press button to
adjust value.

OK

OK

OK

OK

OK

OK

OK

Hour < 02 >
Minute < 03 >

Close

Menu

OK

OK

OK

OK

OK

OK

OK

Date < 02 >
Month < 3 >
Year < 2009 >

Close

Menu

OK

OK

OK

OK

Repeat < Off >
Hour < 00 >
Minute < 00 >

Close

Menu

OK

OK

OK

OK

OK

OK

OK

Activate < Off >
Hour < 00 >
Minute < 00 >

Close

Menu

TIME SETTINGS

NOTE: In DTV mode, because the time information is
from the signal,the Clock and Date are not able to be
changed.
If you want to change the time, turn off the TV in ATV
mode,then turn on the TV.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

1 Press MENU button.

MENU

2 Press button to select Time menu, press button to enter.
3 Press button to select Time Zone item.
4 Press button to select the correct time zone.
5 Press button to save and exit.

Menu

OK

OK

OK

OK

Sleep

Time Zone

1 Press the MENU button and then use button to select the Time menu.

2 Press the button and then use button to select the Sleep.

3 Press the button and then use button to select the

number of minutes.Select Off, 5Min, 10Min, 15Min, 30Min,

45Min,60Min,90Min, 120Min, 180Min, 240Min

4 When you are satisfied with your choice, press MENU

button to return to the previous menu or press the EXIT

button to return to TV viewing. And the time begins to

count down from the number of minutes selected.

The sleep timer automatically shuts off the TV after a preset time
(from 5 to 240 minutes).

OK

OK

OK

OK

Menu

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Press button to select Child Lock.
Press button to setOn or Off mode. If lock on mode is set, Child Lock is in
activated automatically. In such case, if Child Lock button (button on the television)
is pressed, the screen will displayChild Lock, which can be erased by press of
MENU button. 5 seconds later after the latest press, the screen display will disappear
automatically. The Child Lock mode can be resumed by entering Lock Set menu,
set Child LockOn or Off.

1.Press button to select Change Password item.
Press button to enter the submenu.

2.When you have inputted the four digits you will be
prompted to enter it again.
Your new password will then be automatically saved.

Using this function can control the tuner, program,
source volume and so on. Pressing MENU on the remote
control, press button to select Lock menu, press
button to enter the sub-menu, and you will be required to
enter the password. The initial password of the television
is 0000. If you forget your password, you can always
input 9443 to regain control.

Tuning Lock

Press to select Tuner Lock and to set On/Off. (To set On, some operation
such as search will be not available. When enter the Tuning menu, Tuner Lock will be on
the screen. If you want to operate Tuning menu, you need to enter the Lock menu to set
Tuner Lock Off or operate unlock.)

Channel NO.

Channel NO. is opted for setting up preset channel.
Press button to select preset Channel. Press button to select channel number.

LOCK MENU SETTING

CHANGE PASSWORD

CHILD LOCK

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

OK

OK

Menu

OK

OK

OK

Menu

Channel set is opted for setting up start source.
Press button to select Off, DTV, TV, AV,SCART1,SCART2,S-Video,Component1,Component2,
PC, HDMI1,HDMI2,HDMI3,USB in turn. DVD is available for some model.

Source set

Press button to select Max Volume. Press button for adjustment between 0-100. If a certain
Value is set, when volume is being adjusted, the sound value can not exceed maximum volume
value. If current volume is over Max Volume, when lock set menu is set, current volume will
become set maximum volume, if current volume is below maximum volume, customer set volume
will stay unchanged.

Max Volume

Initial Volume

Clear Lock

Press button to select Unlock mode. Press button to unlock all set modes,
setting all lock options to off, and the maximum volume returns to 100.

The TV will remember it after your setting,that will be the volume when turn on the
TV next time.

Source Lock

Source Lock will control the On or Off of hinder external input
modes.
Press button to set as on or off.
When the source lock is set as on, TV source will display, at
this time, when press SOURCE button, the TV can switch to
correspondingsource and will display the Source is locked.

Parental Lock

Press button to select parental lock. Press button to select OFF or 4-18 to limit
the age of children who will watch TV.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

OK

OK

Menu

Subtitle Function

1. Press SUBTITLE button on the remote control will display
Subtitle languages menu, press button to enter.

2. Press button to select the item and press OK button to
enter. You can press the EXIT button to cancel the changes
at anytime.

Notes: press SUBTITLE button on the remote, it will display
subtitle languages menu only in the DTV mode.

AUDIO

CH.LIST Function

1. Press CH.LIST button on the remote control, will display
Channel List menu.

2. Press button to select the channel and press OK button
to enter. You can press the EXIT button to cancel the changes
at anytime.

Press GUIDE button on the remote control, will display
Program Guide menu, press button to select
the program.
You can press the EXIT button to cancel the changes at anytime.

Notes: Available only in the DTV mode.

GUIDE Function

FAV Function

Press FAV button on the remote control, will display
Favourite List menu.
Press button to select program and press OK button to enter.
You can press the EXIT button to cancel the changes at anytime.

Press AUDIO button on the remote control, will display
Audio Languages menu.
Press button to select the desired settings and press
OK button to enter.
You can press the EXIT button to cancel the changes
at anytime.

Notes: Press AUDIO button on the remote, it will display
Audio Languages menu only in the DTV mode.

Press INFO button on the remote control, will display the current
channel information.
You can press the EXIT button to cancel the changes at anytime.

Channel List

Subtitle Languages
off
English

OK

SHORTCUT MENU DISPLAY

INFO

OK

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

BBC ONE Wales

INFO

Record

Schedule

DATE REMIND

OK

Quick program view

1 Suppose the channel number you used just now is 8 and the

channel number you are using is 18 (as shown in the figure).

If you want to return to the last watched program channel 8, you

can simply press the Q.View button.

If you want to return to channel 18, press the button again. Use
this function, you can easily change between the channel you are
using and the channel you used last Timer.

2

3

This function enables quick swap to the last watched program. Press
Q.view button, and the TV will be back to the TV source, expect in
the USB and DVD source.

When you need to pay attention to surrounded sounds, or there is a telephone calling you
or there are some guests visiting you, the sound elimination (mute) function is very convenient.

Eliminate Sound

1 Press the MUTE button on the remote control and "Mute" type face will display on the lower part
of the screen. At this Time, the sound of the TV set is turned off.
2 If you want to recover the sound, press the MUTE button again or directly press V+ button.

SHORTCUT MENU DISPLAY

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Using the features

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Teletext is an information system, broadcast by certain channels, which can be read like a
newspaper . It also provides subtitles for people with hearing difficulties or those who are
unfamiliar with the language in which a particular program is being broadcast (cable networks,
satellite channels, etc.).

Note: The teletext buttons could be working even if there is no teletext signal, but there
is no teletext display.

Teletext functions

Page up/down

Use the P+/P- buttons to browse next or previous page.

To select teletext press the button on the handset. To
switch off teletext, press the button again. Note all menu
functions are not available in teletext mode . Only a few direct
button control functions are available in teletext mode, they are:

Volume adjustment

Mute function

Teletext

Page number entering

Mix mode

To select a Teletext page, enter the page number using
the numeric key pad on the remote control, or use the
P+ or P- buttons, or the coloured Fast text buttons.

To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Press this button again to return to
Full text.

INDEX

Press the INDEX button to go to the index page of teletext.

Teletext functions

Language change

Pressing the button will change the Teletext characters
between Eastern and Western.

Hold

Pressing the button will stop the teletext page automa­tically updating. This feature is very useful where there are
several teletext pages or data on the same page number.

Size

Pressing the button changes between full screen top
half bottom half full screen. This feature is very useful as it
magnifies the image making the characters easier to read.

Reveal

Pressing the button will reveal hidden text. This feature
is used to reveal information such as answers to Teletext
on-line interactive puzzles.

Time

While in normal TV mode only, pressing the button will
display the teletext time in the top right hand corner for a
few seconds.

Fast text coloured buttons

Fast text automatically displays the four most commonly
used pages that the broadcaster thinks that you may want
to choose next. Press the same coloured button on the
remote control as the coloured link at the bottom of the
teletext page to go directly to that page.

Subcode

Pressing the button by entering its 4-digit number to
enter a secondary page

Teletext functions

Teletext

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Note : The diagrams in the following section are schematic and only for your
reference. Please see the actual product if necessary.

TO USE THE USB DEVICE

1.Supported file formats:

1)Photo: *.jpg

2)Music: *.mp3 files

3)Movie: *.avi files;

4)TEXT:*.txt;

Note: Due to the particularity of file cording, some files may be unable to read.

2.Supported equipment:
Support the equipment that supports Mass Storage Protocol and whose file system is
FAT32,such as some USB disks, mobile harddisks,and MP3 player . If USB equipment
could not be identified due to unsupported file system, please format the equipment to
the above-mentioned file system.

3.To achieve smooth playing, ensure the following:

1) The file code rate should be lower than 300KB/S;

2) Due to the limitation of USB signal transmission distance, it is recommended not
to use USB patch cord, in case of using the cord ,make sure that its length is not
over 1m;

3) Use high-speed USB equipment in conformity with USB2.0 full speed Interface
Standard;If USB equipment in conformity with USB1.1 full speed Interface Standard
is used ,the playing may be unsmooth.

USB MODE

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

When connecting/removing the USB device

1. Press SOURCE on the remote control unit to select USB option.

2.Insert USB equipment into corresponding USB interface 2s after starting the system.

3. After entering the system menu, press on the remote control unit to select the
require USB files press “OK” button to confirm the selection and enter the file list relative to
the selection.

5. To exit the streaming media playing system and watch a TV program, you must press
“BACK”button to return to the streaming media main menu at first(to protect equipment),
and then press SOURCE to select TV to return to the TV mode.

Notes:

1. B ,

2.While playing the USB ,press “BACK”button repeatly , the screen picture will return
to USB main interface, and only at this time you can switch corresponding signal
sources by pressing “SOURCE” again.

3.

Under source of US , when press button MENU screen goes black, except when

images or movies are being played.

Please do not unplug the USB device when the connected USB storage device is
working . When such device is suddenly separated or unplugged, the stored files
or the USB storage device may be damaged.

4. Press on the remote control unit to select the required file, press OK button
to enter the selected file.

/

/

USB MODE

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Operating the USB device

1. Press to scroll through main menu or submenu and select your desired

option.

2.Press “OK” to confirm your selection.

3.Press “ ” to achieve the FWD (fast forward) and REV (fast back) of

option being played.

the

4. Press "PLAY/PAUSE" to play and press it again to pause playing.

5. Press “ZOOM” to magnify pictures; when the picture is enlarged, press “ ” and

to move the picture.

6.Press “ STOP ” to stop playing ,or return to the previous menu, and press “BACK”

repeatedly to return to the main menu.

NOTE: You can choose the photos or music in different files to play together.

/

/

/

USB MODE

/

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Playing a Picture

1.After entering USB main interface, press
to select “PHOTO” item.

2.Press OK to confirm the selection and
enter the picture file list.

3. Press to select the picture you
want to play press OK to confirm, and
then press “PLAY/PAUSE” button to play the pictures.

4. If you want to pause the picture which is being palyed, press the PALY/PAUSE button again.

Press ZOOM to magnify the picture. When the picture is enlarged, press “ and

to move the picture.

Press PREV/NEXT ” to select the last or next picture.

Press to rotate the picture.

Press “STOP ” to stop the picture being played.

5.To exit playing, just press BACK repeatedly.

NOTE: The menu display varies with the photo name and pixel in your equipment.

/

/

/

/

USB MODE

/

OK

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Playing Music

1. After entering USB main interface,
press to select “MUSIC”.

2. Press OK to confirm the selection
and enter the music file list.

3. Press and “OK” button to select the music you want to play then press
to play the music.PLAY/PAUSE button

4. To return to the main menu just press BACK repeatedly.

/

/

Press PREV/NEXT ” to select the last or next music.

Press “STOP ” to stop the music being played,when the current interface is the music
being played.

Press “ ” to achieve the REV (fast back) and FWD (fast forward) of musicbeing
played.

the

/

NOTE: You can enjoy the music and the picture at the same time.

USB MODE

OK

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Playing a Movie

2. Press OK to confirm the selection
and enter the movie file list.

3. Press and “OK” button to select the movie you want to play and then press
PLAY/PAUSE button to play the movie.

4. To exit playing, just press BACK repeatedly.

1. After entering USB main interface, press
to select “Movie”.

/

/

Press ZOOM to magnify the picture

Press PREV/NEXT ” to select the last or next movie.

Press “STOP ” to stop the movie being played.

USB MODE

OK

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Text

1. After entering USB main interface,
press to select Text .

2. Press OK to confirm the selection
and enter the text file list.

4. To exit the Text mode just press BACK repeatedly.

3. Press and OK” buttonto
select the text you want to play and
then press PLAY/PAUSE button to play the text .

/

/

Press PREV/NEXT ” to select the last or next text.

USB MODE

NOTE: You can enjoy the music and the text at the same time.

OK

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

IMPORTANT : USB device should be format as FAT32 format by
your PC before insert to the USB connector.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Using External USB Disk For Recording

1. Insert the USB device with FAT32 format into the USB1
connector. Then, press MENU button.

2.Press button to select FUNCTION menu,
press button to enter .

3.Press button to select Recorder. Press OK
button to enter the submenu.

Menu

Select Disk USB1 C:
Check File System start
USB Disk
Format
Time Shift Size
Speed

Ok

Ok

Ok

File System Size

File System Size All
SD 27Min HD7Min

OK CANCEL

Format
Do not unplug USB device

Formating.....

Time Shift Size

Time Shift Size All
SD 14Min HD4Min

OK CANCEL

4.Press button to Select Disk and press
or OK button to enter. Press button to
select disk if your device has several disks.

5.Press button to select Format and press to
enter. Press button to select the size you want
to format .Press OK button to format the USB Disk.

NOTES: The system will format the whole device and
if your device size is bigger than 1GB, you can set
the size which is used for time shift.

6.Format may take several minutes and the time is
depending on the memory size. Press button
to select the Time Shift Disk Size. The max device size
for Time Shift is 8GB.Then, press OK button to save.

NOTES: If you select all the size format for time shift,
you can not do any recording.

7.Waiting for the system checking. And you can see the speed
data after the success checking.

NOTES:

1. Only have to format when you use the device for record for the first time.

2. The minimum device size for record is 1GB. Provide device formatting function
is up to 2TB. The max Multi-Partition is 16 partitions and one is active at a time.

3. Bit rate:
Device bit-rate>4.5MB/s REC is safe at HD stream
Device bit-rate>1.5MB/s REC is safe at SD stream
Device bit-rate<600KB/s REC is bad for REC

4. The system can not work normally if the USB device have the listing problem
below:
The device has bug.
The device has error block.
The device reports the unfaithful size.

Note: Only USB1 is available for recording.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

Time Shift function is only available in DTV
mode. Press PLAY/PAUSE to pause the
program, and press PLAY/PAUSE again, the
time shift program will be played. If you want to
stop time shift function, press the STOP button.
You can stop the time shift program being
played by pressing the button.STOP

RECORDING

1.Press D.MENU button to record the program being
played, and press D.MENU or EXIT button to make
the recording interface minimum.

2.Press STOP button to stop the program
recording being played.

3.For Playback the recorded program. Press
INDEX button to open the recorded list.

Press button to select the content you
recorded.
Press the button to display the program
information.
Press button to cancel.
Press OK or PLAY/PAUSE button to play
the program recorded and press STOP
button to stop it.

Recording

REC

5 five
The streets of SAN francisco

15:06
(384MB)

[00:00:00]

TIME SHIFT

[-00:00:12/00:10:00]

Time Shift

14:51

[-00:00:12/00:10:00]

Time Shift

14:51

A B

RecordedList

Gold workshopwit...

Record

Play

Gold workshopwit...

INDEX

[DATE] 2004/03/01
[TIME] 14:56:09
[DURATION]0000:00:00
[CHANNE NAME] 16QVC
[PROGRAM NAME]

Gold workshop with jan Springer

[00:00:12/00:10:00]

PLAYBACK

14:51

A

B

Gold workshop with jan Springer

NOTE:

1.Changing the channel will not influence the recording in the same
frequency, but will influence the time shift. When the recorded program is being
played, you can not delete it.

2.Press the INDEX button repeatedly , the program will be displayed in the order
of program name , channel name, program time , file name and file length.

DELETE

5 FIVE

USING YOUR DVD PLAYER (certain models only)

PLAYING A DVD

1.Press the SOURCE button on the remote control to
enter DVD mode.

2.Place the DVD in the disc slot with the DVD label
facing away from you and the screen. The disc slot
will only take standard-sized DVD.

3.The DVD will automatically load; most begin with
a disc menu.

4.Use the , , and buttons to navigate around
the DVD menu to highlight the play option and then
press PLAY/PAUSE.

PAUSING A DVD

1.Press PLAY/PAUSE to pause playback. The sound
will also be muted.

2.Press PLAY/PAUSE to resume normal playback.

STOPPING A DVD

1.Press the button to stop playback of a DVD. The
TV screen will show the DVD start-up logo.

2.Some discs will remember the moment at which the
DVD was stopped, so press PLAY/PAUSE to recall the
moment and continue playback.

3.Press the button twice to stop completely and
clear the memory.

USING FAST FORWARD OR REWIND

1.To move forward through a disc more quickly, press
the button.
To rewind through the disc, press the button.

2.Press the or button repeatedly to cycle through
the available speeds, which appear in the top left
corner of the screen: 2X, 4X, 8X, 16X, 32X and normal
playback speed.

3.Press PLAY/PAUSE to resume normal playback.

SKIP TO THE NEXT OR PREVIOUS SCENE

During playback press the button to skip to the next
scene on the disc, or press to skip to the previous one.

PASSWORD

Parental control can be activated by setting the Password
Mode to On. The default password is 0000. If you forget
the password, you can always input1369 to regain control.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

USING THE ZOOM FUNCTION

1.Press the ZOOM button to zoom into the image on screen. You can press it repeatedly
to further enlarge the picture.

2.In zoom mode use the , , and buttons to display a different section of the
enlarged picture on the screen.

SWITCHING ON SUBTITLES

1.Press the SUBTITLE button during playback.

2.The available languages will appear in the top left corner of the screen.
Press repeatedly until your desired subtitle language is shown.

3.Press SUBTITLE repeatedly until SUBTITLE OFF is shown to switch the subtitles off.

USING REPEAT MODE

Press REPEAT once to repeat the chapter on a DVD, twice to repeat the
currently playing title or three times to repeat the whole contents of the disc.

CHANGING THE CAMERA ANGLE

Some DVD have multiple camera angles for some or all scenes. Press the ANGLE
button to change the camera angle. Different camera angles may include: front, side,
whole view or exterior.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

D.MENU

Press this button to return to the previous menu item.

AUDIO

Many DVD have multiple soundtracks. To change between them press the AUDIO
button. Wait three seconds before pressing the button again, to cycle through the options.

TITLE

Press this button to return to the title menu on some DVD . Use the , ,
and buttons to navigate around the menu.

SEARCH

Press SEARCH and use the numerical keys to enter the chapter number you wish to
go to and press PLAY/PAUSE.

PROGRAM

During playback press PROGRAM to move directly to a section or programme on the
DVD. Press the digit buttons to select the programme number that you want. When
finished, move the cursor to select START. The DVD will jump directly to that section
and begin to play. If you want to cancel this function, press PROGRAM and move to
STOP, then press PLAY/PAUSE.

A-B

Use A-B to set a section of a DVD to repeat. Press A-B to mark the start point and again
to mark the end. The section will begin to be repeated immediately.
Press A-B to cancel the repetition.

ANGLE

D.CALL

When enjoying sports, concert or theatre, press this key to watch same actions in
different angles.(Valid for discs possessing this function. Using a disc recorded in
multi-angle you can view the scene from different angles, for example, front, side, whole
view and exterior scene.)

When pressing theD.CALL button repeatedlydifferent OSD indicator will be displayed for
different types of disc DVD, CD etc

ADDITIONAL DVD FUNCTIONS

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

PLAYING A JPEG CD

1.Insert a JPEG CD in the same way as you would a DVD or Audio CD, with the label
facing away from you.

2.The CD will load and a menu of the disc's contents will appear on screen.

3.Use the and buttons to highlight the folder and picture you wish to view and press
PLAY/PAUSE. Each image on the disc will show consecutively, like a slide show.

4.Press PLAY/PAUSE during the slide show to pause on one image.

5.Press the or button to skip to the next image or return to the previous one.

PLAYING AN AUDIO CD

1.Insert a CD in the same way as you would a DVD, with the label facing away from you.

2.The CD will load and a menu of the disc's contents will appear on screen.

3.Use the and buttons to highlight the track you wish to play and press PLAY/PAUSE,
or just press PLAY/PAUSE to listen to the whole CD from the beginning.
You can stop, pause, fast forward or fast rewind a CD in the same way as a DVD.
You can also use the REPEAT button to repeat a track, folder album or the contents of
the whole disc. Press repeatedly to select what you would like to repeat. You can also

use the A-B function to repeat a certain section of a track or CD.

TROUBLESHOOTING

To assist in location of possible faults use the help guide below:

Note:

1.If the fault can not be repaired using the above guide consult with your local authorized
service centre.

2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a
fatally or fire.

No picture, no sound

Verify if the television is properly plugged in.
Verify if the television has a proper supplied power source.
Verify if electricity is available.

Blank screen

Verify if correct signals are input.
Operate the remote to change signal input to correct input.
Restart the television if power supply is interrupted.

No sound

Press MUTE button and verify if Mute mode is set.
Switch to other channel and verify if the same problem
happens.
Press VOL+ button to see if the problem can be solved.

Poor sound

Verify if sound system is correct. Refer to user's manual
for adjustment.

No picture in some
channel

Verify if correct channel is selected.
Adjust the antenna.

No color for some channel
program (black and white)

Verify if the same problem exists in other channels.
Check out of picture and sound systems.
Refer to relative instructions in the Manual for color
adjustment.

Spots with some or
all pictures

Verify if the antenna is correctly connected.
Verify if the antenna is in good condition.
Make fine adjustment of channel.

Television out of control

Disconnect the television from power supply and 10
seconds later, connect the television to the power supply.
If the problem still exists, contact authorized after-sales
service for technical assistance.

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105

SCREEN SECTION

Type A-si TFT active matrix
Viewable angle 160(H) 150 (V) (S626/S626D)
176 (H) 176 (V) (S632F/S632D /S642F/S642F1)
Colour system PAL, SECAM, NTSC (AV)

TV/VIDEO SECTION
Sound system BG, DK, I, L
Video input SCART, S-VIDEO, YPb/Pr, YCb/Cr, AV,VGA,
HDMI,USB

GENERAL SECTION
DTV Y/Pb/Pr Composite: 480i/p, 576i, 720p, 1080i, 1080p
Power See rating plate
Power consumption See rating plate
Dimensions (W x D x H) cm

63.3 x 20.0 x 49.7 (including base) (S626)

63.3 x 20.0 x 49.7 (including base) (S626D)

79.8 x 23.0 x 57.5 (including base) (S632D)

79.8 x 23.0 x 57.5 (including base) (S632F)

102.2 x 28.9 x 70.4 (including base) (S642F/
S642F1)

Environment conditions Working temperature: +5 C - +35 C
Working humidity: 20% - 80%
Storage temperature: -15 C - +45 C
Storage humidity: 5% - 90%

Accessory User manual
Remote control
Base cover (Only for S642F/S642F1 )
Battery (x2)

The part specifications of this TV set provided here are for reference only.
Differences may occur as product technology is updated.
Design and specifications are subject to change without notice.

Specification

06

Year

This product is guaranteed for twelve months from the date of original purchase. Any
defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer
from whom you purchased the unit.
The guarantee is subject to the following provisions:

- The guarantee does not cover accidental damage, misuse, cabinet parts, knobs
or consumable items.

- The product must be correctly installed and operated in accordance with the
instructions contained in this manual.

- It must be used solely for domestic purpose.

- The guarantee will be rendered invalided if the product is re-sold or has been
damaged by inexpert repair.

- Specifications are subject to change without notice.

- The manufacturer disclaims any liability for the incidental or consequential damages.

- The guarantee is in addition to, and does not diminish your statutory or legal rights.

- In the event of a problem with the product within the guarantee period call the
customer helpline on 0845 604 0105

Guarantor: Argos Ltd

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

PRODUCT GUARANTEE

This product is guaranteed against manufacturing defects for a period of

BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105