BUSH IDLED2402DVD User Manual

LED LCD TV/DVD Combo

INSTRUCTION MANUAL

IDLED2402DVD

The Gold Technical Support Line: 1902 215 259

Personal Product Support

(Charges will apply at $2.95 per minute)

INTRODUCTION

Thank you for buying this Bush product, which is designed to give you many years of trouble free service.

You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit s m any f eatures and to ensure you get the very best from your purchase.

Safety is important

Your safety and the safety of others is important. Therefore, please ensure you read the Safety Instructions before you operate this unit.

Warranty In the unlikely event that your product fails to work normally, please call the below Bush warranty number to discuss the problem with one of our qualified service engineers.

Australia Bush Warranty: 1800 509 394

New Zealand Bush Warranty: 0800 450 259

Contents

INTRODUCTION...............................................................................1

SAFETY INSTRUCTIONS...............................................................3-4

BASE STAND INST ALLATION

WALL MOUNTING INST ALLATION

INSTALLATION.......................................................................... 7 -10

REMOTE CONTROL..................................................................11-12

OPERATION..............................................................................13-18

DVD OPERATION...................................................................... 19-23

DVD TROUBLESHOOTING..............................................................24

TROUBLESHOOTING..................................................................... 25

TECHNICAL SPECIFICATIONS........................................................26

WARRANTY....................................................................................27

.......................................................... 5

.................................................... 6

SAFETY INSTRUCTIONS

1. Do not use this TV near dripping or splashing water. Do not use any liquids near this TV.

2. Clean witha dry cloth only.

3. Do not block any ventilation openings and install in accordance with the manufacturers instructions.

4. Do place this TV near any heat radiating sources, such as; heaters, stoves, or other devices (including amplifiers) that produce heat.

5. Please ensure that the power cord is protected from damage (i.e. being walked on, cut or split) especially at the inputs.

6. Only use attachments/accessories specified in this manual.

7. Unplug the TV during lightning storms or when the unit will be unused for long periods of time.

8. Refer all servicing to a qualified service personnel. Servicing is required when the TV has been damaged in any way, such as; if the power supply cord or plug is damaged, if liquid has been spilled or objects have fallen into the TV, if the TV has been exposed to rain or moisture, if does not operate as per this manual, or if it has been dropped.

9. The TV should not be exposed to dripping or splashing and no objects filled with liquids, Such as vases, should be placed on the apparatus.

10.If the television is to be built into a cabinet or similar enclosure, a small amount of distance should be maintained to ensure ventilation. Heat build up will reduce the service life of your television, and can also be dangerous.

ADDITIONAL SAFETY NOTES

Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual.

All LED LCD TVs are high voltage instruments. When you clean the unit or cabinet turn off the power and use a dry soft cloth.

During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV.

All repairs to this TV should only be performed by qualified TV service personnel.

SAFETY AND WARNINGS

Important Safety Instructions

Warning: To reduce the risk of electric shock, do not remove the cover or back as there are no user serviceable parts inside. Refer all servicing to a qualified technician.

Warning: To prevent fire or electric shock hazard, do not expose the unit to any liquids or moisture.

Do not expose the TV and power adaptor to water (dripping or splashing) and no objects filled with any liquids, such as vases, should be placed on or near the unit.

Please ensure that this product is kept away from direct sunlight and heat sources. Do not block the any of the ventilation openings. Slots and openings on the unit are

provided for ventilation. The openings should never be blocked. Do not place the product on any unstable surfaces as this may cause the unit to fall and

may cause possible damage or injury. Never place heavy or sharp objects on the panel or frame. Only use the AC adapter included with product. Using any other adaptor will void your

warranty.

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To dispose of your LED LCD TV contact your retailer where the product was purchased for tips on safe disposal when the time comes.

ACCESSORIES

Remote Control x 1

User s M anual x1

Battery(AAA) x 2

Base Stand Assembly Instruction

INSTALLATION

1. Place the TV with the display side down on a flat surface.Use a cloth to protect. Locate the bottom at the stand.

2. Fix the bottom with turning the screw tightly on the stand.

INSTALLATION NOTES

This TV can be connected to an AC 100 240 Volts, 50/60 Hz power supply. Never connect straight to a DC power supply.

Locate the TV in a room where light does not strike the screen directly. Total darkness or a reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation. Avoid excessively warm locations to prevent possible damage to the cabinet or premature

component failure.

INSTALLATION

WALL MOUNTING INSTALLATION GUIDELINES

This television can be wall mounted as follows:

1.Place the LED LCD Television onto a solid surface. Please place some soft material over the front of the screen to protect it from any damage.

2.Remove the screws from the lower part of the television, where the base joins to the TV, and take away the stand (put the stand somewhere safe for future use).

3.Use the four screws provided to fix the TV onto a wall mounting bracket (not included) via the four VESA standard holes on the back of the television.

100mm

Front panel

Side Buttons

INSTALLATION

1: Remote Control Sensor. 2: Indicator LCD LED: BLUE POWER ON.

1 2

RED STANDBY. 3: Side buttons (refer to image below)

3 3

SOURCE MENU CH+ CHVOL+ VOLSTANDBY

OPEN/CLOSE

PLAY/PAUSE

1 SOURCE Press the SOURCE Button to display the Input Source list. 2 MENU Press the MENU Button to display the Main Menu. 3 CH+/CH-

Press the CH+/CH Buttons to change the channel. In the SOURCE Menu, press the CH+/CH Buttons scroll through the Input Source List. In the MAIN MENU, press the CH+/CH Buttons to scroll through the Menu options.

4 VOL+/VOL-

Press the Vol+/Vol Buttons to adjust the Volume level. Press the Vol+/Vol Buttons to confirm your selection in the Input Source Menu.

STANDBY

Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.

OPEN/CLOSE

Press this button to eject your .

PLAY/PAUSE

Press this button to play disc or press again to pause.

disc

Rear Sockets

INSTALLATION

AV L R Y Pb Pr

DC 12V/3A

HDMI2

Outlined below is the Rear Sockets provided AV Input, R/L Audio Input, DC Power Source Input, YPbPr Input and HDMI2 Input.

Note: 1. The AV Input and YPbPr Input share one audio channel.

When HDMI 2 is connected with DVI video source, the R/L of AV will be used

for audio source input.

Side Sockets

AV OUTPUT

HDMI1

USB PC AUDIO

VGA RF

Outlined below is the Side Sockets provided HDMI1 Input, USB Input, PC Audio Input, AV Output, VGA Input and RF Input. Note: When HDMI 1 is connected with DVI video source, the "PC audio input" will be used for audio source input.

ANTENNA

Note: Aerial Connections: IEC(female). Input Impendance: 75 unbalanced.

STEPS:

Ensure the TV and your computer are both set to power off before your connect.

1.Connect the VGA Input & PC Audio Input as above.

2.Connect power supply again to your TV set.

3.Turn on the TV and then press the SOURCE Buttons to select PC mode.

4.Then turn the PC power on.

HDMI1

USB PC AUDO

AV OUTPUT

VGA RF

+ 20 hidden pages