Bush IDLCD1910HD Instruction Manual

19

INSTRUCTION MANUAL

IDLCD1910HD

The Gold Technical Support Line: 1902 215 259

Personal Product Support

(Charges will apply at $2.95 per minute)

INTRODUCTION

Thank you for buying this Bush product, which is designed to give you many years of
trouble-free service.

You may already be familiar with using a similar unit, but please take time to read
these instructions. They are designed to familiarise you with the unit s many features
and to ensure you get the very best from your purchase.

Safety is important

Your safety and the safety of others is important. Therefore, please ensure you read
the Safety Instructions before you operate this unit.

Warranty

In the unlikely event that your product fails to work normally, please call the below
Bush warranty number to discuss the problem with one of our qualified service
engineers.

Australia
Bush Warranty: 1800 509 394

New Zealand
Bush Warranty: 0800 450 259

-1-

CONTENTS

1. INTRODUCTION.........................................................................1

2. SAFETY INSTRUCTIONS............................................................3

3. INSTALLATION..........................................................................

ACCESSORIES............................................................................. 4

FRONT PANEL...............................................................................

KEY BOARD

REAR PANEL.................................................................................

ANTENNA CONNECTION...............................................................

CONNECTING TO PC.....................................................................

PC PRESET...................................................................................

CONNECTING TO AV EQUIPMENTS...............................................

.................................................................................

3

4

5

5

6
7
8
9

4. REMOTE CONTROL................................................................ ...10

BATTERY INSTALLATION...............................................................

KEYS FUNCTION...........................................................................11

10

5. OPERATION........................................................................... ... 12

BASIC OPERATION........................................................................12

TELETEXT..................................................................................... 13

MENU OPERATION....................................................................14-18

6. TROUBLESHOOTINGS......................................................... 19

....

7. TECHNICAL SPECIFICATION..................................................... 20

8. WARRANTY................................................................................21

-2-

SAFETY INSTRUCTIONS

1. Do not use this apparatus near water.

2. Clean only with dry cloth.

3. Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.

4. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.

5. Protect the power cord from being walked on or pinched particularly at plugs
convenience receptacles, and the point where they exit from the apparatus.

6. Only use attachments/accessories specified by the manufacturer.

7. Unplug this apparatus during lightning storms or when unused for long periods of

time.

8. Refer all servicing to a qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

9. The apparatus should not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, should be placed on the apparatus.

10. If the television is to be built into a compartment or similar enclosed, the minimum

distances must be maintained. Heat build-up can reduce the service life of your
television, and can also be dangerous.

ADDITIONAL SAFETY NOTES

Never tamper with any components inside the TV, or any other adjustment controls not
mentioned in this manual.

All LCD-TVs are high voltage instruments. When you clean up dust or water drops on
the LCD PANEL or CABINET, the power cord should be pulled out from the receptacle,

then wipe the TV with a dry soft cloth.
During thunder and lighting, unplug the power cord and antenna cord to prevent

damage to your TV.
All repairs to this TV should only be performed by qualified TV service personnel.

This TV can be connected to AC 100-240 Volts, 50/60HZ power supply. Never connect

to a DC supply or any other power supply.

-3-

ACCESSORIES

INSTALLATION

Infrared Remote Control............

User s Manual ........................

Battery(AAA)........................... 2

FRONT PANEL

1

1

3

4

1

2

30 30

1:

Indicator

LED: GREEN POWER ON.

RED STANDBY.

Remote control sensor.

2:
3:

Key board(see next page).

4:

Power:Press the standby

on the rear panel, to turn

Press

the standby

turn the

unit

OFF.

-4-

button

button

the unit on.

,again to

KEY BOARD

INSTALLATION

REAR PANEL

INPUT

1

1

MENU

INPUT

VOL+

VOL-

2

3 4 5

CH-

CH+

Press to display the Input Source Menu.

MENU

2

Press to display the Main Menu.

3

VOL+/VOL­Press to adjust the sound level.
In Menu mode,

to select

4

CH+/CH-

In

TV mode

press VOL+/VOL- buttons

t

he items.

desired menu

press the CH+/CH- buttons

to change the channel up and down.

MENU mode,

In

to select the menu items .

5.
Standby button turns the TV on & off.

HEADPHONE JACK

standby

1. ANTENNA INPUT

.

HEADPHONE JACK

2

3. VGA-AUDIO INPUT

1

2

3

4 5 6

4. VIDEO AND YPbPr AUDIO INPUT

5. AV INPUT

6. S-VIDEO INPUT

-5-

7

7. YPbPr INPUT

8. VGA INPUT

9. HDMI INPUT

8

9

ANTENNA CONNECTION

INSTALLATION

HEADPHONE JACK

Note:
Aerial connections IEC female:( ).
Input impendance unbalanced:75 .

-6-

CONNECTING TO PC

STEPS:

Be sure both the TV and computer are set to Power off.

1. .Connect VGA and audio cable

2. .Connect the power cord

3. , .Power on the TV switch the input source to VGA mode

4. .Power on the PC

This sequence is very important.

INSTALLATION

HEADPHONE JACK

HEADPHONE JACK

Power cord

8

VGA cable

PC Audio

-7-

PC PRESET

PRESET MODE(recommended resolution is 1024*768@60Hz)

INSTALLATION

RESOLUTION

1

2

3

4

5

6

7

8

9

720*400

640*480

800*600

800*600

800*600

800*600

1024*768

1024*768

1024*768

V.Freq.(Hz) H.Freq.(KHz)

70

60

56

60

75

72

60

70

75

31.47

31.47

35.156

37.88

46.88

48.08

48.36

56.48

60.02

-8-

CONNECTING TO AV EQUIPMENTS

This TV provides three groups of AV,

DVD or other video equipment,

VCR,

ou can use the input terminals on TV set rear as follows.

Y

two groups of YPbPr for convenient

HDMI for HD signal

and an

INSTALLATION

connection to

input.

VIDEO EQUIPMENT with AV

HEADPHONE JACK

R

W

Y

W

R

R

Y

W

W

R

VIDEO EQUIPMENT with S-VIDEO

VIDEO EQUIPMENT with YPbPr

R

W

R

B

R

G

HDMI

B

G

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
video game or stereo system as well as a number of other electronic items.
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i,1080p.

-9-

REMOTE CONTROL

BATTERY INSTALLATION

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries
matches the polarity marks inside the unit.

3. Mount the battery cover.
Replace with new batteries when the TV set begins to show

Operation is unsteady or erratic. Sometimes the TV set does
Control Unit.

Remark:

Alkaline Battery Recommended.

1)

the

following symptoms:

not function with Remote

2) Remove batteries when they are exhausted or if the remote control is not to be used for
an extended period of time.

-10-

21

1

9

13

19

23
25

3

4

5

7

12

11

27
29

15
17

KEYS FUNCTION

10
11

11
11

14

16

18
20

30

24
26

28
28

REMOTE CONTROLREMOTE CONTROL

Press the Menu button to turn on the menu.

:

【MENU】

9

:

【EXIT】

10

11

12

13

14

2

15

16

17

6

8

18

19

20

21

22

23

24

22

25

26

27

28

29

30

Press the Exit button to exit the menu.

【 】/【 】

ENTER

【 】

your desired options.

【VOL+/-】

level up

【CH+/-】

up or down.

【ZOOM】

sizes and to change size of the Teletext .

RECALL

previous program.

EPG

Press the

:

turn on or off the guide in DTV mode.

Press the List button to view the channel list.

LIST

:

Green button: Press the Green button to access

the edit option at the

Blue button: Press the Blue button to access

the edit option at the

Red button: Press the Red button to access

the edit option at the

Yellow button: Press the Yellow button to access

the edit option at the

: Press the Teletext button to view the Teletext menu.

:

Use the Arrow buttons to navigate

/

【 】

【 】

/

Press the Enter button to select and confirm

:

:

Press the Volume button to adjust the volume

or down.

:

Press the Channel button to adjust the

:

Press the ZOOM button to select

:

Press the Recall button to return to the

EPG ( Electronic Program Guide ) button to

lower part of the screen.

lower part of the screen.

lower part of the screen.

lower part of the screen.

different screen

the menu.

channel

RADIO: Press the Radio button to turn the Radio on or off.

: Press the Still button to hold the Teletext page on display

to prevent

mode or subpage.

【FAV+】/【FAV- 】

channels in

the page from changing.

SUBTITLE

SLEEP

Press the Subtitle button to enter into

:

:

Press the Sleep button to set sleep timer on or off.

:

Press the FAV buttons to select

ascending

or descending order

.

the subtitle

he favourite

t

:Press the Index button to view the index page.

:Press the E/W button to switch between Eastern Europe

E/W

and Western

Europe languages in the teletext menu.

Turns Power On or Off.

:

】

【

1

【MUTE】

2

【INFO】

3

【0-9】

4

select a channel number or to enter your code to

5

【INPUT】

AUDIO

6

Turns Sound On or Off.

:

:

Turns Program information menu On or Off.

Number buttons

unlock your

:

These buttons are used to

password

:

:

This button can be used to switch

】

【

o Press the Input button t

select signal source.

between Audio options & Audio languages in DTV mode.

MODE

7

【P． 】

the Picture

8

【S.MODE】

the Sound mode.

Press the P.Mode button to select

:

mode.

:

Press the S.Mode button to

select

-11-

OPERATION

BASIC OPERATION

TURN ON /OFF THE UNIT

1. Connect the TV unit to the power source using the power cord.

Turn on the main power switch.

2.

3. When the power indicator is red, the TV is in Standby mode. Press the "

on remote

green. Press the button again to turn the TV back to standby.

4. To turn off the TV, press ''

5. The power consumption is less than 1W in Standby mode.

please disconnect

Note: The TV set can turn off automatically after 5 minutes while there is no signal
input.

CHANNEL SEARCH

Press
and press the ENTER button to confirm.If you are using the unit for the first time, an
Installation Guide menu will be displayed to guide you through the Channel Scan.

Use the remote control to finish Channel Scan.

control or on the top panel to turn on the TV. The indicator will now be

''"

button on the back of the front panel.

the INPUT

''

the power cord from the wall outlet.

button on the remote control to select the TV or DTV input mode

unused for a long time,

If

" button

CHANGING THE CHANNEL

Press the CH- or CH+ button to select the previous or next channels or press the 0-9
buttons to enter a channel number directly. Press LIST button to view the channels
list and press the buttons to select the desired TV programmes.

CHANGING THE VOLUME

the VOL - or VOL + button to adjust the volume level. Press the VOL - button

Press
repeatedly to decrease the volume. Press the VOL
the volume.

CHANGING THE PICTURE MODE

Press the

CHANGING THE SOUND MODE

Press the button repeatedly to cycle through the available sound modes.

VIEW

Press the INFO button to display the preset channel information.

MUTE

Press the button to cut off the sound output, press this button again to resume
sound output.

CHANGE INPUT SOURCE

Press the buttons to select the input source and
press the ENTER button to confirm.

P.MODE

S.MODE

CHANNEL INFORAMTION

MUTE

button repeatedly to cycle through the available picture modes.

INPUT

button then press the

+ button repeatedly to increase

-12-

OPERATION

TELETEXT

Teletext is an information system broadcast by certain channels which can be

consulted like a newspaper. It also offers access to subtitles for viewers with
hearing problems or who are not familiar with the transmission language.

Display Teletext

1.Select a TV station with a teletext signal.

2.Press the button to enter the teletext mode.

3.Press the button again to enter the Mix mode.

4.Press the button a third time to exit.

Page selection

1.Enter the page number (three digit) using the number buttons. If you press a wrong
number during input, you must complete the three digit number and then re-enter the

correct page number.

【 】/【 】

2.The

Hold

You can press the

Index

Press the

Enlarging Text

When a page is displayed, you can double the size of the text to make it easier to read.

1.Press the

2.Press the

3.Press the

buttons and

button to enter the main index page directly.

button to enlarge the top half of the page.

button again to enlarge the bottom half of the page.

button once more to return to the normal display.

CH+/CH- keys can be used to select the

button to hold a page and press it again to release the page.

following page.

Subpage

Some teletext may contain several sub-pages which are automatically paged in a
certain cycle by the TV station.

1.You can select a certain subpage by pressing the SUBTITLE button directly
and selecting the page

Enter the subpage number,

2.Press the

3.Press the

Colour buttons(Red,Green,Yellow,Cyan)

Press these buttons when promoted by the on screen Menu.Each colour will

correspond with the appropriate option.

button,again to exit the subpage mode.
button to return to the normal TV mode.

number with the NUMBER buttons.

e.g.0003 for the third subpage.

-13-

Using the Function

Menu overview

Many function settings and adjustments of the

ǏMENUǐ

Press the

the submenu

button

to display

you want.

When an item in the MENU is grey

the main menu.

LCD

TV will begin from the main menu.

ǏMENUǐ Press the

Lock. through the main menu: Channel , Picture, Sound, Timer, Option and

, it means that the item is not available or cannot be adjusted.

button or

Press the

/

Ǐǐ

Ǐǐ

Ǐǐ/Ǐǐ

OPERATION

to

buttons

buttons

cycle

to

select

(

Channel Menu

1.Press the MENU button to select the Channel Menu. Press buttons to cycle through the main menu .

2.Press the

Ǐǐ/Ǐǐ

3.Press the buttons to adjust the submenu or subitem.

Ǐǐ

4.When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.

5.If the channel is locked or Lock System is On, you should enter the password before channel searching.

buttons to highlight the item to be adjusted.

/

Ǐǐ

In TV,DTV mode

/

Ǐǐ

Ǐǐ

)

Channel

To display the current channel number and to adjust it press the

bu ttons.

/

Ǐǐ

Ǐǐ

Auto Search

Press the

found cha nnels will be stored.

TV to DTV searching mode.

button to start Auto Search .Once the progress bar is full, the

Ǐǐ

If you pr ess the ME NU button it

w ill skip from

Manual Search

The Manual search option allows you to preset programs one by one. The first Source Sel. is TV, t he other one is DTV.

Press the RED button to

Source Sel.: To display the current input source (TV/DTV).

Current CH: To display the

Frequency: To display the frequency of the program.

Search:

Fine:

NOTE: In DTV mode, when highlighting Current CH or Frequency, the TV

T

o decrease and increase the frequency.

To adjust the frequency (In TV mode).

the current channel number changes to yellow.

will begin DTV Manual Search.

save your program of choice.

channel number.

After adjustment,

Skip

You can select the
channel number changes to red.

skipped program function by

pressing the number buttons directly.

After adjustment, the current

-14-



Picture Menu

/

Ǐǐ

1. Press the MENU button to select the Picture Menu.

2. Press the

3. Press the

4. When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.

Ǐǐ/Ǐǐ

Ǐǐ

buttons to highlight the item to be adjusted.

buttons to adjust the submenu or subitem.

/

Ǐǐ

Contrast

Press the

Ǐǐ

buttons to adjust the contrast of the picture.

/

Ǐǐ

Brightness

Press the

Ǐǐ

Saturation

Press the

Ǐǐ

buttons to adjust the brightness of the picture.

/

Ǐǐ

buttons to adjust the colour saturation.

/

Ǐǐ

Sharpness

Press the

Ǐǐ

Tint

Press the

Ǐǐ

Screen

(In

Auto Adjust

H Position

Phase: Press

:

:

V Position: Press

e :

zSi

buttons to adjust the Sharpness level

/

Ǐǐ

buttons to adjust the tint

/

Ǐǐ

mode )

PC-RGB

Press the

autom

ress

P

Pr es s

button to adjust the position of the picture

Ǐǐ

atically.

the

/

Ǐǐ

Ǐǐ

the

/

Ǐǐ

Ǐǐ

/

Ǐǐ

Ǐǐ

the

/

Ǐǐ

Ǐǐ

the

of the picture (NTSC)

djust the horizontal p osition.

to a

buttons

buttons to adjust the vertical position.

buttons to adjust the size of

buttons

to adj ust the phase of pictur e.

Advance

ZOOM :

Colour Temp:

DNR:

Press the

Ǐǐ

the

Press

Ǐǐ

Provide the picture with dymatic noise reduction treatment.

/

Ǐǐ

/

Ǐǐ

buttons to

select the ZOOM mode.

buttons to

select the Colour Temp mode.

Press the

Ǐǐ

of the picture.

picture.

buttons to cycle through the Main Menu.

OPERATION

Sound Menu

/

Ǐǐ

1. Press the MENU button to select the Sound Menu. Press the

2. Press the

3. Press the

4. When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.

Ǐǐ/Ǐǐ

Ǐǐ

buttons to highlight the item to be adjusted.

buttons to adjust the submenu or subitem.

/

Ǐǐ

Ǐǐ

Treble

Press the

Ǐǐ

Bass

Press the

Ǐǐ

Balance

Ǐǐ

Press the
right speakers.

buttons to increase and decrease the level of the pitch.

/

Ǐǐ

buttons to increase and decrease the level of the pitch.

/

Ǐǐ

/

Ǐǐ

buttons to adjust the audio output betw

een left and

AVL

L(Automatic Volume Control) is used to control the volume automatically.

AV

-15-

buttons to cycle through the Main Menu.

Surround

Press the

Ǐǐ

buttons to switch the surround sound.

/

Ǐǐ

Timer Menu

MENU button to select the Timer Menu. Press the1. Press the

2. Press the

3. Press the

4. When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.

Ǐǐ/Ǐǐ

Ǐǐ

buttons to highlight the item to be adjusted.

buttons to adjust the submenu or subitem.

/

Ǐǐ

Clock

You can display either the DTV Signal Stream Time or set the System Time .

Off time

Press the

button to set the time for the TV to switch o ff.

Ǐǐ

On Time

Press the

button to set the time for your TV to turn on.

Ǐǐ

Sleep

.

Press the

Ǐǐ

buttons to select the Sleep Time

/

Ǐǐ

you want.

Summer Time

Press the

Ǐǐ

b uttons to switch the Summer Time on or off.

/

Ǐǐ

Time Zone

Press the

Ǐǐ

buttons to select your time zone.

/

Ǐǐ

.

/

Ǐǐbuttons to cycle through the Main Menu to select it.

Ǐǐ

Option Menu

OPERATION

MENU 1. Press the

2. Press the

3. Press the

4. When you are satisfied with your adjustment, press the EXIT button to exit the Main Menu.

Language

Press the

Ǐǐ/Ǐǐ

Ǐǐ

Ǐǐ

to select the Option Menu. Press the

buttons to highlight the item to be adjusted.

buttons to adjust the submenu or subitem.

/

Ǐǐ

buttons to select OSD language

/

Ǐǐ

Ǐǐ

.

/

Ǐǐ

buttons to cycle through the Main Menu.button

Panel Lock

Press the

Ǐǐ

Lock is set to On, all of the buttons are locked. Press any button

than 5 seconds to release it . When it is set as Off, the buttons of TV are
in normal mode.

buttons to switch the Panel Lock. When the Panel

/

Ǐǐ

for more

System

button to display the System Information: Software Information and Signal Information Press the

Ǐǐ

).

DTV mode

Default

Press the button to clear all programs or reset default setting .

Ǐǐ

Clear All Progarm:

Factory Setting:

NOTE: Lock Setting and Hotel Setting can t be restored.

Press the

Press the

Ǐǐ

button to clear all programs

Ǐǐ

button to restore factory setting.

,

or information.

-16-

(

Sig nal I nformati on only in

OPERATION

Advance

/

Ǐǐ

Audio Language˖

Subtitle Language˖Press the buttons to set the default

Hearing Impaired˖ When hearing impaired is ON, the TV screen will turn

()

EPG

ENTER: Press the ENTER button to change channel.

you press the

(Only frequency in T V

DELETE: Press the RED button to delete a channel .

FAV

MOVE:

DTV mode

In

This function gives you detailed information about the channel you are watching, indicating the time of the program playing.

From

t

he EPG it is possible to check the program information for the next eight days ( If the information is available from the

broadcaster .)

RADIO: Press the RADIO button to switch between

INFO:

Schedule

DATE

List

Press the

RADIO and DTV.
Press the INFO button to see the detailed
information of the current channel.

Press the GREEN button to see the

:

schedule information.

:

Press the YELLOW button to see the
detailed information of the next eight days,

and you can press the

to select the date information.

:

Press the BLUE button to book a program.

Reminder

()

In TV/DTV mode

button to display the Channel List picture. The list of programs will include all TV, DTV and Radio. When

Ǐǐ

Ǐǐ

Press the GREEN button to set a channel as your favorite channel.

:

Press the YELLOW button to move the position of the channel

( In TV mode) .

Ǐǐ

Press the buttons to set the default
Audio Language.

/

Ǐǐ

Ǐǐ

Subtitle Language.

on the subtitles and turn off when the functions is off.

buttons

/

Ǐǐ

Ǐǐ

buttons to change programs,

/

Ǐǐ

mode.)

the signal quality , singal

strength

, frequency will display on screen.

Channel List

DTV

Radio

Frequency 85 2.Frequency 85 25MHz.

TV

TV

1S02-1S02-

TV

2C42-2C42-

TV

3C44-3C44-

EXIT

EXIT

LOCK

MOVE

MOVE

FAV

DELETE

Lock Menu

1. Press the MENU button to select the Lock

The default password is “0000”.

2. Press the Ǐǐbutton to enter password menu, then input the password to enter the Lock Menu.

3

4.

5.

Ǐǐ/Ǐǐ

Press the

.

Press the

Ǐǐ

When you are satisfied with your adjustment, press the EXIT button

to exit the

Main Menu.

buttons to highlight the item to be adjusted.

buttons to adjust the submenu or subitem.

/

Ǐǐ

Menu. Press the buttons to cycle through the Main Menu.

Ǐǐ

/

Ǐǐ

-17-

ENTER

EXIT

ENTER

OPERATION

If you forget your private password, the super password is "1225", this will always unlock your TV.

Ć

Press the NUMBER button s on the remote control to set the new password. When the new password has been input

twice, the password is set. The TV will go back to the previous menu.

Set Password

Press the Ǐǐbutton to see the Set Password submenu. Press the NUMBER button to enter the new password.

Program Blocked

Press

the GREEN button

Parent Lock

You can rate and lock programmes based on the censor age ratings.

NOTE: When you select "default factory settings" the Lock Setting won t change.

(In TV, DTV mode)

to lock

(In DTV mode)

the available program you want.

Program Blocked

1S02-1S02­2C42-2C42-

3C44-3C44-

DTV

LOCK

Radio

ENTER

TV

TV

TV

EXIT

TV

EXIT

Press the GREEN button again to unlock it.

Frequency 85 25MHz.Frequency 85 25MHz.

EXIT

,

,

s

Hotel Mode

1

Press the INPUT button to display the Source Menu, then press

adjust the relative settings.

On Source

Set the default signal source by pressing the or Ǐǐbuttons.

(The default signal source will be displayed

turns on.) Optional signal sources are as follows: DTV,

TV, Component, PC-RGB, HDMI, AV, S-Video.

Ǐǐ

when the TV

On Channel

Set the default channel by pressing

(The default channel will be displayed when the TV turns on).

Ǐǐ/Ǐǐ

the buttons

On Volume

Set the default volume by pressing

(The default volume is the volume when the TV turns on.

volume).

Ǐǐ/Ǐǐ

the buttons

Remember the default volume should be less than the maximum

Volume Max.

Set max volume by pressing the ǐbuttons.

is the priority.

volum

e

Ǐǐ/Ǐ

When the max volume is lower than the default volume, the max

Hotel Mode Enable

the hotel mode is enabled. The TV will automatically enter into hotel mode when turns on next time.

Ǐǐ/ǏSet the hotel mode ON/OFF by pressing the

NOTE:
When “HOTEL

When you select "default factory setting" the Hotel Setting won

MODE” is “ON”, the tuning and list function is locked.

ǐbuttons. When it is “ON” and switch off at the AC power supply,

,

t change.

-18-

4

in turn to enter into the Hotel Mode to

0

7

Hotel Option

On Source DTV

On Channel

On Volume

Volume Max.

Hotel Mode Enable

EXIT

EXIT

0

30

70

On

TV TROUBLESHOOTING

Problem

Picture Audio

Snow Noise

Ghost

Interference

Normal Picture

No picture Mute

No colour Normal

Normal audio

Noise

Mute

Check

Check the Antenna position,
direction

Check the Antenna connection
Check for electrical interference,

by moving other electrical

products away from the TV.

Check if the Mute function is on
Check the volume level
Check the audio connections

Check the main power is on

Check the system conn
are correct and connected

firmly.

Check the contrast, brightness

audio

and colour settings

and connection

Check the Antenna
direction

and connection

position,

ections

Picture
breaking up

Normal audio

or weak

-19-

Check the antenna connection

Check the cable connection

LCD :

ViewIng Picture Size(diagonal)

Resolution

Aspect Ratio

Display colours

Brightness

Contrast ratio

Response time

View angle

TV:

TV system

DVB-T decode

DVB-T de-modulation

Terminals:

RF IN Input

ear phone Input

VGA-audio Input

AV Input

S-VIDEO Input

Y Pb Pr Input

Analog RGB(VGA) Input

HDMI Input

TECHNICAL SPECIFICATIONS

19

1366x768

16:9

16.7M

300 CD/M

1000:1
5 ms

170(H)/160(V)

Digital TV: DVB-T
Analog TV: PAL

Audio: MPEG2 Audio Layer I&II
Video: MPEG2 Transport MP@HL

Demodulator : COFDM
OFDM Mod.: 2K, 8K FFT, SFN and MFN
Packed Carries: 2K/8K
Guard Interval: 1/4, 1/8, 1/16, 1/32

2

1

1
1

1
1

1

1

1

Others:

Input P

ower Voltage

Power consumption

utput Power

Audio O

NOTE: The specification shown above may be changed without prior notice for quality improvement.

THD 7%

100V-240V~ 50/60Hz

60W

)

2x2W

-20-

WARRANTY

Please keep your receipt as proof of purchase. This product is warranted for any
defect in materials or workmanship for one year after purchase. This product is for
normal domestic and office use only. This warranty does not cover damage from
misuse or neglect, accidental damage, vermin infestation, excessive voltages such as
lightning or power surges or any alteration that affects the performance or reliability of
the product.

In the unlikely event that your product fails to work normally, please contact the

Warranty on 1800 509 394 (Australia) or 0800 450 259 (New Zealand)

your receipt of purchase on hand.

This warranty is subject to the following provisions:

It is only valid within boundaries of the country of purchase.
The product must be correctly assembled and operated in accordance with the
instructions contained in the manual.
This product must be used solely for domestic purposes .
The warranty does not cover accidental damage.
The warranty will be rendered invalid if the product is resold or has been damaged
by inexpert repair.
The manufacturer disclaims any liability for incidental or consequential damaged.

This warranty is in addition to, and does not diminish, your statutory or legal
rights.

PO BOX 6287
Silverwater NSW 1811
www.bushaustralia.com.au
Bush Warranty: 1800 509 394 Australia
Bush Warranty: 0800 450 259 New Zealand

Bush

and have

-21-

PO BOX 6287
Silverwater NSW 1811
www.bushaustralia.com.au