Bush DLED48265FHDCNTD Instruction manual

48” LED TV

Installation & Operating Instructions - Please keep for future reference

377/5514

DLED48265FHDCNTD

IMPORTANT - Please read these instructions fully before installing or operating

These instructions contain important information which will help you get the best from your television and ensure safe and correct installation and operation.

For any help concerning set up and use of your TV please call the

Customer Helpline:

Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

0 345 604 0105

Issue 1 - 9/2/11

Contents

Safety Information 4

Support 7

Getting Started 8

Features & Accessories 8

Standby Notications 9

Viewing remote control 10

Attaching the Stand 11

Control Buttons & Operation 12

Aerial & Cable connection 13

Power connection 13

Wall Mounting 13

Remote control - Inserting batteries 13

Switching the TV On and Off 13

Switching the TV On 13 Switching the TV Off 13

First Time Installation 14

Information Banner 15

Connections 16

General TV Operation 22

Electronic programme guide (EPG) 22

Basic Operations 23

Displaying Subtitles 23 Zoom Modes 23 Using Main Menu Screen 23

Conguring Date/Time Settings 23

Source Settings 23 Current Language 23

Channel Management 24

Moving a Channel 24 Deleting a Channel 24 Renaming a Channel 24 Locking a Channel 24 Button Functions 24 Sorting Channel List 24

Favourite Mode & Timers 25

Favourite Mode 25 Conditional Access 25 Setting Sleep Timer 25 Setting Programme Timers 25 Editing a Timer 26 Deleting a Timer 26

Power Save Mode 26 Repair Information 26

Picture Controls 27

Conguring Picture Settings 27

Picture Settings Menu Items 27

PC Picture Controls 28

PC Picture Settings Operation 28

Sound & Source Controls 30

Other Controls 31

Language Settings 32

Media Browser 33

Starting Media Browser 33

Media Browser Conguration 33

Viewing Videos via USB 34 Video Playback Screen 34 Subtitle Time Correction 34 Viewing Photos via USB 34 Displaying Photos in Slideshow Mode 34 Playing Music via USB 34 Using MENU button in Media Browser Mode 35

Insallation Controls 36

Accessing Installation Menu 36 Automatic Channel Scan (Retune) 36 Manual Channel Scan 36 Analogue Fine Tune 36 First Time Installation 36 Clear Service List 36

Parental Control 37

Teletext 38

Connectivity Functions 39

Connecting to a Wired Network 39

Connecting to a Wireless Network 40

Conguring Network Settings 41

Conguring Wired Device Settings 41

Network Type 41

Conguration Status 41

IP Address 41

Conguring Wired Network Settings in

Advanced Mode 41

Conguring Wireless Device Settings

(Optional) 41 Information 42

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Contents

Delete Saved Wi Proles 42

Connecting to your Cell Phone via

WiFi (Optional) 42 Wireless Network Not Available 42

Connection is Slow 42 Distruption during playback or slow reactions 42

Using DLNA Network Service 43

Step 1: Nero Media Home Installation 43

Step 2: Connect to a Wired or Wireless

Network 43 Step 3: Play Shared Files via Media Browser 43

Internet Portal 44

iPlayer Application 44

Internet Browser 45

Appendix: Nero MediaHome Installation 46

Product Support 47

General Specications 48

Plug replacement - UK and Ireland only 49

Supported File Formats for USB Media Browser 51

AV and HDMI Signal Compatibility & Typical PC Resolutions 52

Supported DVI Resolutions 53

Software Upgrade 55

Manual Software Update 55

Disposal information 56

Guarantee 57

Model number

BUSH DVB-T-C DLED48265FHDCNTD

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

The lightning ash with arrowhead symbol,

within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Preparation

Place the device on a solid even surface. For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, do not place any objects on top of the set. Use this device in moderate climates.

Operation temperature and operation humidity: 0ºC up to 40ºC, 85% rel. humidity max. (not blocking ventilation openings).

Intended Use

This device is used to receive and display TV programmmes.The different connection options make an additional expansion of the reception and display sources possible (various external devices). This device is only suitable for the operation in dry interiors. This appliance is intended solely for private domestic use and may not be used for industrial and commercial

purposes. We exclude liability in principle, if the

device is not used as intended, or unauthorized

modications have been made. To operate your

LCD TV in extreme ambient conditions may cause the damage of the device.

WARNING: Never let people (including children) with physical, sensory or mental abilities or lack of experience and / or knowledge unsupervised use electrical device!

Children may not recognize dangers right! The swallowing of batteries can be fatal. Keep batteries always out of reach of small children. If a battery is swallowed, immediately seek medical

attention. Keep the packaging lms out of reach

of children. Risk of suffocation.

Power source

• The TV should be operated only from a 220240 V AC, 50 Hz outlet.

• Warning: Do not leave your TV in standby or operating mode when you leave your house.

Positioning the TV

• For ventilation, please leave a clear space of at least 10cm all around the TV.

• Do not block the ventilation openings.

• Do not place the TV on sloping or unstable

surfaces, the TV may tip over.

• To prevent damage to the TV, do not place any objects on top of the TV.

• Only use the TV in moderate climates.

Power cord and plug

• The power cord plug should be easily accessible. In case of storms and lightning, when going on holiday, or when the TV is not used for a long period of time disconnect the power cord from the mains power socket.

• The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.

• Do not place the TV, furniture, etc. on the power cord or pinch the cord.

• Handle the power cord by the plug, do not unplug the TV by pulling the power cord.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

• Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.

• Never make a knot in the power cord or tie it with other cords.

• Power cords should be placed in such a way that they are not likely to be stepped on or driven over.

• A damaged power cord/plug can cause re or give you an electric shock. When damaged it

must be replaced, this should only be done by

qualied personnel.

Moisture and Water

• Do not use this TV in a humid or damp place (avoid bathrooms, the sink in the kitchen, and near the washing machine).

• Do not expose this TV to rain or water, as this may be dangerous.

• Do not place objects lled with liquids, such as ower vases, on top of the TV. Avoid from

dripping or splashing.

• If any solid object or liquid falls into the cabinet, unplug the TV and have it checked

by qualied personnel before operating it any

further.

Ventilation

• The slots and openings on the TV set are intended for ventilation and to ensure reliable operation.

• To prevent overheating, these openings must not be blocked or covered in anyway.

Heat sources and Flames

• Do not expose the TV to direct sunlight or other heat sources.

• The TV should not be placed near to open ames and sources

of intense heat such as an electric heater.

• Ensure that no open flame sources, such as lighted candles, are placed on top of the TV.

Headphone Volume

• Excessive sound pressure from earphones and headphones can cause hearing loss, please take care.

Wall Mounting (optional)

• To prevent injury, this TV must be securely attached to the wall in accordance with the installation instructions (if the option is available).

LCD Screen

• Occasionally, a few non-active pixels may appear on the screen as a xed blue, green or

red point. Please note that this does not affect the performance of your product.

• Take care not to scratch the screen with ngernails or other hard objects.

Cleaning

• Before cleaning, unplug the TV from the wall socket.

• Do not use liquid or aerosol cleaners. Only use a soft, dry cloth.

•

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

Batteries

• Warning: Incorrect installation of batteries may cause battery leakage and corrosion, resulting in damage to the remote control.

• Do not mix old and new batteries, or batteries of different types.

• Do not dispose of batteries in a re.

• Do not dispose of batteries with normal

household waste, take to a local recycling centre.

CAUTION: Insert the batteries / rechargeable batteries in the correct polarity. Don´t try to recharge non rechargeable batteries and under

no circumstances throw them into re. Danger of

explosion. Do not use unequal batteries (old and new, Alkaline and carbon, etc.) simultaneously. If you will not use the device for a long time, remove the batteries and store the device in a dry and dust free place. Improper use of batteries may cause an explosion or leakage. If the batteries have leaked, use gloves and clean the appliance thoroughly with a dry cloth! Batteries should not be exposed to heat,

such as sunshine, re or the like.

Replacement Parts

When replacement parts are required, make sure

that the service technician has used replacement

parts, which are specied by the manufacturer or have the same specications as the original one. Unauthorised substitutions may result in re,

electrical shock or other hazards.

Taking out of service and storing

Unplug the TV from the mains and pack the TV in an appropriate cardboard box. Remove the batteries from the remote control and pack the remote control to the TV set.

NOTE: The TV set should be stored in a dry

and dust-free room.

Connection to a Television Distribution System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some

circumstances create a re hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11).

Symbols in this Instruction Book

The following symbols are used in the Instruction Book as a marker for restrictions and precautions and safety instructions. Note such information for security reasons.

WARNING

If you do not pay attention to such a marked warning, it can cause serious injury or death. Note these warnings strictly, in order to ensure a safe operation.

CAUTION

Such a precaution is marked, you should take up or note, to avoid injury or property damage. Note these instructions strictly, in order to ensure a safe operation.

IMPORTANT

Warnings on the appliance and restrictions are displayed

like this. Read this information strictly in order to operate the system correctly and avoid damage.

NOTE: Information about the operation and additional explanations are marked like this. To be aware of such information is recommended to

ensure that the functions can be used optimally.

The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Support

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

• Simple help and advice on setting up your digital

equipment (image).

• Guidance on connecting other devices to your

television such as a DVD player, Sky, home cinema system or a games console.

• Order spare parts, including that lost remote

control.

• Any other technical issues you may need

assistance with.

Call us today: 0 345 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff. Mobile and other providers costs may vary, see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from Republic of Ireland will attract international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Features & Accessories

TV - Features

• Remote controlled colour TV.

• Fully integrated digital TV (DVB-T).

• HDMI connectors for digital video and audio.This connection is also designed to accept high denition

signals.

• USB input.

• 1000 programmes.

• OSD menu system.

• Scart socket for external devices (such as video,

video games, audio set, etc.).

• Stereo sound system.

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Automatic power down after up to six hours.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista, Windows 7.

• Game Mode (optional).

• Picture off function.

• Ethernet (LAN) for Internet connectivity and

service

• Picture Off function

• 802.11n built in WIFI Support

• DLNA

Accessories included

Remote Control

Batteries: 2 x AAA

Instruction Book

Quick Start Guide

Side AV Connection Cable

NOTE: You should check the accessories after purchasing. Make sure that each accessory is included.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Standby Notications

If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on:

When the Auto Tv Off timeout is reached, the

following message will be displayed on the screen. Select YES to shut down the TV. Select NO to cancel. The TV will switch off as well, if you do not make a selection on this screen.

If the TV switches off owing to the auto power down feature, the following on-screen message will be displayed on the next switch-on:

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Viewing remote control

1. Standby: Switches On / Off the TV

2. TV: Displays channel list / Switches among

broadcast types / Switches to TV Source

3. Volume +/-

4. Menu: Displays TV menu

5. OK: Conrms user selections, holds the page

(in TXT mode), views channel list (DTV mode)

6. Back/Back: Returns to previous screen, opens

index page (in TXT mode)

7. Internet: Opens the portal page, where you can

reach many web based applications

8. My button (*)

9. Netix: Launches the Netix application.

10. Coloured Buttons: Follow the on-screen

instructions for coloured button functions

11. Language: Switches between sound modes (analogue TV), displays and changes audio/subtitle language (digital TV, where available)

12. Rapid reverse: Moves frames backwards in media such as movies

13. Pause: Pauses the media being played

14. No function

15. Play: Starts to play selected media

16. Stop: Stops the media being played

17. Rapid advance: Moves frames forward in

media such as movies

18. Subtitles: Turns subtitles on and off (where available)

19. Screen: Changes the aspect ratio of the screen

20. Text: Displays teletext (where available), press again to superimpose the teletext over a normal broadcast picture (mix)

21. Media browser: Opens the media browsing screen

22. EPG (Electronic programme guide): Displays

the electronic programme guide

23. Exit: Closes and exits from displayed menus or returns to previous screen

24. Navigation buttons: Helps navigate menus,

content etc. and displays the subpages in TXT

mode when pressed Right or Left

25. Quick Menu: Displays a list of menus for quick access

26. Info: Displays information about on-screen

content, shows hidden information (reveal - in TXT

mode)

27. Programme +/-

28. Mute: Completely turns off the volume of the

29. Swap: Quickly cycles between previous and current channels or sources

30. Numeric buttons: Switches the channel, enters

a number or a letter in the text box on the screen.

31. Source: Shows all available broadcast and

content sources

(*) MY BUTTON:

This button may have a default function depending on the model. However you can set a special function to this button by pressing on

it for ve seconds when on a desired source, channel or link. A conrmation message will be

displayed on the screen. Now the MY BUTTON is associated with the selected function.

Note that if you perform First Time Installation, MY BUTTON will return to its default function.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Attaching the Stand

1. Stand is placed on a at surface (g.1).

2. The product is held over the stand so that

it coincides with the stand mounting point and then it is left to be mounted with its own

weight (g.2).

g.1

g.2

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Control Buttons & Operation

1.Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On

selection switch

The Control switch allows you to control the Volume/ Programme/ Source and Standby-On functions of the TV.

To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down.

To change channel: Press the middle of the button, the channel information banner will appear on screen. Scroll through the stored channels by pushing the button up or down

To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through the available sources by pushing the button up or down.

To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode.

NOTE: You can move the switch, upward or

downward to change the volume. If you want to change the channel, press the middle of the switch once (Position 3) and then move upward or downward. If you press the middle of the switch once more, the source OSD will be displayed. To select desired source, move the switch upward or downward and release. If you press the middle of the switch and hold for a few seconds, the TV will switch to standby mode. The Main menu OSD cannot be displayed via the control buttons on the TV.

Operation with the Remote Control

Volume Setting

Press V + button to increase the volume. Press V - button to decrease the volume. A volume level scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next Programme)

Press P - button to select the previous programme. Press P + button to select the next programme.

Programme Selection (Direct Access)

Press number buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between 10-10000, press the number buttons consecutively.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

Aerial & Cable connection

Connect the “aerial” or “cable TV” plug to AERIAL INPUT (ANT.) socket located on the back of the TV (g.1).

Power connection

IMPORTANT :The TV set is designed to

operate on 220-240V AC, 50 Hz.

Please note: After unpacking, allow the TV to reach ambient room temperature before connecting the TV to the mains power socket.

Connect the power cord plug to the mains power socket.

The LED on the front of the TV then lights up, this indicates that the TV is in ‘Standby’ mode.

Wall Mounting

When wall mounting please ensure you use a

compatible wall mount (not supplied). This TV

conforms to the VESA mounting specications and

is 400 x 400mm.

Remote control - Inserting batteries

Remove the battery cover on the back of the remote control, gently push down and pull backwards at the same time as shown.

Insert two AAA/R3 or equivalent type batteries. Ensure the batteries are inserted the correct way and replace the battery cover (g.2).

NOTE: When the remote control is not going to be used for long periods of time, the batteries should be removed. Otherwise the remote control may be damaged, caused by battery leakage and corrosion.

Switching the TV On and Off

Switching the TV On

With power cord plug connected to the mains

power socket, the TV is in ‘Standby’ mode.

To switch the TV on from standby mode:

Press the “ ” button and the TV will switch to standby mode. Then the standby LED lights up.

To switch on the TV from standby mode either:

a. Press the “ ” button, P+ / P- or a numeric button on the remote control.

b. Press the middle of the “ ” button on the TV..

By either method the TV will switch on.

Aerial or Cable

VGA

SPDIF

(g.1)

AAA/R3 x 2 Batteries

(g.2)

Switching the TV Off

Press the “ ” button on the remote control or press the standby “ ” button, so the TV will switch to standby mode.

To turn off the TV completely, remove the power cord plug from the mains power socket.

NOTE: When the TV is in standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

NOTE: If you switch on your TV via P +/buttons on the remote control or +/- on the TV set, the programme that you were watching last will be reselected.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Getting Started

First Time Installation

When turned on for the rst time, the “language

selection” menu appears. The message “Welcome please select your language!” is displayed in all

language options listed alphabetically.

Press the “ ” or “ ” button to highlight the required language, press OK button to select. “First Time

Installation” appears. Use “ ” or “ ” button to set the required country, and press “ ” button to select Search

Type. Use ” or “ ” to set the desired search type. Available search types are Digital and analog, digital only and analog only. When set, press “ ” to select

Teletext Language. Use “ ” or “ ” button to set the “Teletext Language” and select “Scan Encrypted” using “ ” or “ ” button. You can set Scan Encrypted as Yes if you want to scan coded stations.

best display quality. A conrmation screen will be

displayed after selecting the Store Mode. Select YES to proceed.

If Home Mode is selected, Store mode will not be available after the First Time Installation. Press OK button on the remote control to continue and the following message will be displayed on the screen.

You must select a search type to search and store broadcasts from the desired source.

Aerial Installation

If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts.

Press OK button on the remote control to continue and the following message will be displayed on the screen.

You can activate Store mode option by using “ ”

or “ ” button. If Store Mode (optional) is selected, Store mode option will be available in other settings menu and your TV’s settings will be optimized for

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

NOTE: You can press “MENU” button to cancel.

After all the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN (if available*), please

select “Yes” and than press OK.

Press OK button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence.

Getting Started

Cable Installation

If you select CABLE option and press OK button on the remote control to continue, the following message will be displayed on the screen:

To continue please select YES and press OK. To cancel operation, select NO and press OK.

You can select frequency ranges from this screen. For highlighting lines you see, use “ ” or “ ” button.

You can enter the frequency range manually by using the numeric buttons on the remote control.

Set Start and Stop Frequency as desired by using numeric buttons on the remote control.

After this operation, you can set Search Step as 8000 KHz or 1000 KHz.

If you select 1000 KHz, the TV will perform search process in a detailed way. Searching duration will thus increase accordingly.

When finished, press OK button to start automatic search. The TV will search and store available broadcasts.

(*) Network option will not be available for UK.

Information Banner

Whenever you change channel using the P-/P+ buttons or the numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen.

The information banner can be displayed at any time while watching TV by pressing the INFO

button on the remote control (g.8).

Hint: Not all channels broadcast the programme data. If the name and time of the programme are not available, then information banner will be displayed with blanks.

If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000, except for the France). “Enter PIN” will be displayed on the screen in such a case.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

Back connections explained

1. Ethernet (LAN) Input

2. HDMI Input

Connects a device that has an HDMI socket. The TV can display High Definition pictures

from devices such as a High Denition Satellite

Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. No sound connection is needed for an HDMI to HDMI connection.

3. S/PDIF Out

Outputs audio signals of the currently watched source. Use an SPDIF audio cable to trasfer audio signals to a device that has S/PDIF input.

4. PC Input (VGA)

Connects a personal computer to the TV. Connect the PC cable between the PC INPUT on the TV and the PC output on the PC. You can use the PC input to allow YPbPr signal connection with a device that has component output. Connect the YPbPr to PC cable between the PC INPUT on the TV and the component video outputs of the device.

5. SCART socket

Inputs or outputs for external devices. Connect the SCART cable between the SCART socket on the TV and the SCART socket on the external device (decoder, VCR or DVD player).

NOTE: If an external device is connected via the SCART sockets, the TV will automatically switch to AV mode. When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart sockets.

6. RF Input (ANT.)

Connects to aerial (antenna) or cable TV. If you use a decoder or a media recorder, you should connect the aerial cable through the device to the TV with an appropriate aerial cable.

SPDIF

VGA

5 6

NOTE: When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

SIDE AV

MODE

5Vdc

Max:500mA

5Vdc

Max:500mA

Left side connections explained

7. CI Slot

Used to insert a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section.

8. USB Input

To connect USB disks to the TV, providing fast data exchange.

9. Side audio-video input

This input is used for connecting video and audio signals of external devices. To make a video connection, you must use the supplied AV connection cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV socket. Afterwards, insert your video cable (not supplied) connector into the

YELLOW input (located on the side with several

connectors) of the supplied AV connection cable. Colours of the connected jacks should match. To enable audio connection, you must use RED

and WHITE inputs of the side AV connection

cable. Afterwards, insert your device’s audio

cable connectors into the RED and WHITE jack

of the supplied side AV connection cable. Colours of the connected jacks should match.

10. Headphone

Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones.

11. Magic Button

Volume/ Programme/ Source and Standby-On switch.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

HDMI 1

DMH I 2

SPDIF

Coax.OUT

PC Input

(back)

Side AV Input

PC VGA Cable (not supplied)

PC Audio Cable

(not supplied)

Side Audio/Video Connection Cable

(supplied)

SIDE AV

HDMI Connections

HDMI lets you enjoy high denition digital images

and high quality sound by connecting the TV to external devices such as DVD players, set top boxes or gaming equipment (g.1).

Power off both the TV and the device before making any connections. For more information, refer to your device’s own instruction book. After making the connection, switch to HDMI 1, HDMI 2 as a source, depending on which HDMI connector the external equipment is connected. See, Input Selection section for more information on changing sources.

NOTE: HDMI cable is not supplied.

SCART Connections

Most devices support SCART connection. You can connect a; DVD recorder, VCR or decoder to the TV using the SCART socket (g.2).

Power off both the TV and the device before making any connections. For more information, refer to your device’s own instruction book. The Scart cable is not supplied.

NOTE:If your external device has a S-Video output, it is possible to connect your external device with a SCART-S-video adapter (not included) to the scart input of the

TV. First plug the SCART S-Video adapter to the SCART connector on your TV set. Then, connect a S-video cable to the SCART socket (via the Scart S-Video adapter) to the S-video output of your external device.

VGA Connections

You can connect a computer (PC) to the TV to display your computer’s screen image on the TV. Power up both computer and TV before making any connections. Use a 15-pin D-sub display cable to connect a PC to the TV. You must

use audio inputs of side AV connection cable (RED & WHITE) to enable sound connection when connecting a device to your TV by using the PC input. (g.3). When the connection is

made, switch “Source” to “PC-VGA”. Set the

resolution that suits your viewing requirements. Resolution information can be found in the “Appendix parts” .

NOTE: The cable is not supplied.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

VGA

SPDIF

(g.1)

Scart Cable

(not supplied)

External device

(g. 2)

(g. 3)

HDMI Cable

(not supplied)

External device

Connections

Side AV Connections

You must use the supplied SIDE AV connection cable for enabling SIDE AV connection.

1. Plug single jack of the cable to the TV’s SIDE AV socket.

2. Insert your AV cable’s (not supplied) connectors into the plural part of the SIDE AV connection cable (see illustration below). Colours of the connected jacks should match.

3. To enable audio connection, use an audio cable. Insert your device’s audio cable’s connectors into the plural part of the SIDE AV connection cable. Colours of the connected

jacks should match (g.1).

4. When the connection is made, switch to FAV

source.

Using a Conditional Access Module

I MPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF.

In order to watch certain digital channels, a conditional access module (CAM) can be necessary. This module must be inserted in the CI

slot of your TV (g. 2).

1. Obtain the Conditional Access Module (CAM) and

the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure.

2. Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV.

3. The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.

4. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.

5. When no module is inserted, “No Common Interface module detected” message appears

on the screen.

You can refer to the module instruction manual for details of the settings.

SIDE AV

AV Connection

Cable (supplied)

(g.1)

(g.2)

AV Cable

(not supplied)

module

Camera

CAM

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

USB Connections

2.5” and 3.5” inch (hdd with external power supply) external hard disk drives are supported.

IMPORTANT

You should back up your les before making

any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any

le damage or dataloss.

It is possible that certain types of USB devices (e.g. MP3 Players) or USB hard disk drives/ memory sticks may not be compatible with this TV.

USB Disk Connection

Plug your USB device to the USB input of the TV.

NOTE: Plug or unplug your USB disk while the TV is

switched off. If you are going to connect a USB hard disk

drive to the TV set, USB connection cable used between the disk drive and the TV should have a USB logo and should be as short as possible.

While formatting a USB hard disk that has 1TB (Tera Byte) or more file capacity, you can experience problems with the formatting process. In such a case, you should format the disk with your personal computer and the formatted disk type should be FAT32.

CAUTION:

Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device itself. Do not pull out USB module

while playing or recording a le.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connections

Selecting source

Once you have connected external devices to the TV, you can select and change the input source required.

To change Input Selection, use one of the following options:

Option a: Press the SOURCE button on the remote control to directly select required source.

Option b: Select “SOURCES” from the “Settings” menu using the “ ” or “ ” button.

Use the “ ” or “ ” button to highlight the

required input and press the “ ” button to select.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Electronic programme guide (EPG)

Some, but not all channels send information about the current and next programmes. Press

the EPG button to view the EPG menu.

Info bar commands:

RED button - Prev day: Displays previous day.

GREEN button - Next Day: Displays next day.

YELLOW button - Prev. day: Zooms to

programmes.

INFO button - Details: displays, in detail information on programme selected.

SWAP button - Now: jumps to the current broadcast (when viewing previous “Prev. day” or future “Next day” programmes).

SUBT.: Selects genre.

Numeric buttons: Jump. Go to preferred

channel directly using number buttons.

OK button : Displays programme options.

TELETEXT button - Search: to view “Guide

Search” menu. Using this feature, you can search the programme guide database in line with the genre selected or with name match and on the day/s selected.

EPG screen in regular mode

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Basic Operations

Displaying Subtitles

With digital terrestrial broadcasting (DVB-T),

some programmes are broadcasted with subtitles.

1. Press MENU button to display main menu, highlight “Settings” then “Language Settings”

menu using “ ” or “ ” or “ ” or “ ” button, press OK button to display “Language settings” menu.

2. Highlight “Subtitle” in “Language settings” menu using “ ” or “ ” button. Use “ ”

or “ ” button to set Subtitles to the desired language.

NOTE: You can directly press SUBTITLE button to enable or disable subtitles. If “Subtitle” is On, pressing the “ ” button causes a warning message

to be displayed on the screen (** for UK only).

Zoom Modes

Programmes can be watched in different picture formats, depending on the transmission received.

You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes.

Press SCREEN button repeatedly to change the image size. Available zoom modes are; 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3, Panoramic and Cinema.

NOTE: You can shift the screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as panaromic, 14:9 Zoom, Cinema or Subtitle. This is only possible as long as the display of the screen format is displayed.

Using Main Menu Screen

1. Press MENU button to display main menu,

highlight the desired control icon using “ ” or “

” or “ ” or “ ” button, press OK button to

display menu contents.

2. Highlight an option inside a menu screen by using “ ” or “ ” button.

3. Use “ ” or “ ” button to set an option.

4. If “OK” box is displayed next to a menu setting,

press “OK” to display sub-menu screen.

Changes are automatically stored. Press

“MENU” to exit.

NOTE: See Picture, Sound, Settings and

Installation Control sections for learning the

functions of menu items.

Conguring Date/Time Settings

1. Select Date/Time in the Settings menu to

congure Date/Time settings.

2. Press OK button.

3. Use “ ” , “ ” and “ ” , “ ” buttons to

set the options. Some items might be available to be set due to the selected modes.

Source Settings

You can enables or disable selected source options. When set, the TV will not switch to the disabled source options when “SOURCE” button is pressed.

1. Select “Sources” in the “Settings” menu and press “OK” button.

2. Press “ ” , “ ” buttons to select a source.

3. Use “ ” , “ ” button to enable or disable the selected source.

Current Language

(*) For digital broadcasts.

If there is a programme that is broadcasted with multi-channel sound or subtitles and offers different languages for these, you can choose the language. Press LANG. button to select between available options.

NOTE: If the background is transparent, on screen texts will be slightly transparent as well.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Channel Management

The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Press MENU button to view main menu.

Select Channel List item by using “ ” or “ ” button. Press OK to view menu contents.

Select Edit Channel List to manage all stored channels. Use “ ” or “ ” and OK buttons

to select “Edit Channel List”.

Note: The channels listed are mixed at the channel list. Channel types can be differentiated by the icons next to them: DTV (digital tv), HD (HD TV) , ATV (Analogue TV) ,TV (TV), RD (Radio), encrypted, lock, and at the favourite list.

Navigating Channel List

1. Press “ ” or “ ” button to select

previous or next channel. Press P+ or P- button to move up or down the page.

2. To watch a specic channel, highlight the

“OK” box on Channel List menu using “ ” or

“ ” button.

Moving a Channel

1. Select the desired channel.

2. Select Move box in the channel list and press OK button.

3. Edit Number screen will be displayed. Enter

the desired channel number by using the numeric buttons on the remote control.

NOTE: If there is a previously stored channel on that number, a warning screen will be displayed.

4. Select Yes if you want to move the channel and press OK.

Deleting a Channel

1. Select the channel that you want to delete and select Delete box.

2. Press OK button to continue. A warning screen

will appear. Select YES to delete, select No to cancel. Press OK button to continue.

Renaming a Channel

1. Select the channel that you want to rename and select Edit Name box. Press OK button to continue.

2. Use navigation buttons to toggle between the

current character, i.e., ‘b’ character becomes ‘a’ by “ ” and ‘c’ by “ ”.

3. When nished, press OK button to save. Press MENU to cancel.

Locking a Channel

1. Select the channel that you want to lock and select Lock option. Press OK button to continue.

2. You will be asked to enter parental control PIN. Default PIN is set as 0000. Enter the PIN number.

3. The desired channel is locked (Lock symbol is

displayed next to the selected channel) or unlocked.

Button Functions

OK: Add/remove a station.

YELLOW: Tag/untag a channel.

GREEN: Tag/untag all channels.

BLUE: Displays ltering options.

Sorting Channel List

You can select broadcasts to be listed in the

channel list. To display specic types of broadcast,

you should use Active channel list setting.

Select Active channel list from the Channel list menu by using “ ” or “ ” button. Press OK button to continue.

You can select a network type option from the list by using “ ” or “ ” and OK buttons.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Favourite Mode & Timers

Favourite Mode

You can create a list of favourite programmes using the favourites feature. In such a case, only the favourite channels are navigated.

1. Press “MENU” button to view main menu.

2. Select Channel List item by using “ ” or “ ” button.

3. Press “OK” to view menu contents.

4. Use “ ” or “ ” and “OK” buttons to

select “Favourites”.

5. Select a channel by using “ ” or “ ” button.

6. Press “OK” button to add selected channel to favourites list. Press “OK” button again to remove.

Button Functions

OK: Add/remove a station.

YELLOW: Tag/untag a channel.

GREEN: Tag/untag all channels.

MENU: Exit.

Conditional Access

If you have inserted a conditional access module and viewing card to your TV, you can use Conditional Access menu. Note that these menu settings may change depending on the service provider.

1. Press “MENU” button and select the “Settings” icon by using “ ” or “ ” button.

2. Press “OK” button to view Settings menu.

3. Use “ ” or “ ” button to highlight Conditional Access and press “OK” to view

menu items.

Setting Sleep Timer

This setting is used for setting the TV to turn off after a certain time.

1. Press “MENU” button and select the “Settings” icon by using “ ” or “ ” button.

2. Press “OK” button to view Timers menu.

3. Highlight Sleep Timer by using “ ” or “

” button.

4. Use “ ” or “ ” button to set. The timer can be programmed between Off and 2.00 hours (120 minutes) in steps of 30 minutes.

Setting Programme Timers

You can set programme timers for a particular programme using this feature.

1. While in Timers menu, press “ ” button to

activate timers functions.

2. Programme timer function buttons will be displayed on the screen.

3. Press YELLOW button on the remote control

to add a timer. Timer options and denitions are

as the following:

Network Type: This feature is unavailable to be set.

Timer Type: You can select timer type as Record

or Timer.

Channel: Changes channel by using “ ” or “ ”.

Record Type: This item is unavailable to be

set.

Date: Enter a date using the numeric buttons.

Start: Enter a starting time using the numeric

buttons.

End: Enter an ending time using the numeric buttons.

Duration: Displays duration between the starting

and ending time.

Repeat: Sets a timer to be repeated as Once, Daily or Weekly. Use “ ” or “ ”buttons to select an option.

Change/Delete: Sets the change/delete permission.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Timers - continued & Power Save Mode

Playback: Sets the playback permission and

parental settings.

4. Press GREEN button to save the timer. Press RED button to cancel.

Editing a Timer

1. Select the timer you want to edit by pressing

“ ” or “ ” button.

2. Press “GREEN” button. Edit Timer menu screen will be displayed.

3. When nished with editing, press “OK” button to save. You can press “RET/BACK” button to cancel.

Deleting a Timer

1. Select the timer you want to delete by pressing

“ ” or “ ” button.

2. Press RED button.

3. Select YES by using “ ” or “ ” buttons to delete the timer. Select NO to cancel.

Power Save Mode

This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to

the energy efciency feauture of this TV. To

reduce energy consumption, you should take the following steps:

You can use Power Save Mode setting, located in the Picture Settings menu. If you set Power Save Mode as Eco, the TV will switch to energysaving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

Disconnect power when going away for longer time.

It is highly recommended to activate Power Save Mode setting to reduce your annual power consumption.Also it is recommended to disconnect the TV from the mains plug to save energy more when you do not use.

Please helps us to save environment by following these steps.

Repair Information

Please refer all servicing to qualied personnel. Only qualied personnel must repair the TV.

Please contact your local dealer, where you have purchased this TV for further information.

If Picture Off is selected, “Screen will be off in 15 seconds.” message will be displayed on the screen. Select PROCEED and press OK to continue. The screen will be off in 15 seconds. If you disable Power Save Mode, Picture mode will be automatically set to Dynamic.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also reduce energy consumption.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Picture Controls

Conguring Picture Settings

You can use different picture settings in detail.

Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to

view Picture Settings menu.

Operating Picture Settings Menu Items

Press “ ” or “ ” button to highlight a menu item.

Use “ ” or “ ” button to set an item.

Press “MENU” button to exit.

Picture Settings Menu Items

Mode: For your viewing requirements, you can set

the related mode option. Picture mode can be set to one of these options: Cinema,Game,Dynamic,

Sport and Natural.

Contrast: Sets the lightness and darkness

values of the screen.

Brightness: Sets the brightness value for the screen.

Sharpness: Sets the sharpness value for the objects displayed on the screen.

Colour: Sets the colour value for the screen. Power Save Mode : Press “ ” or “ ” button

to set Power Save Mode.

If Picture Off is selected, “Screen will be off in 15 seconds.” message will be displayed on the screen.

Select PROCEED and press OK to continue. The screen will be off in 15 seconds. If you disable Power Save Mode, Picture mode will be automatically set

to Dynamic.

NOTE: The backlight function will be inactive

if Power Save Mode is set to Eco.

Backlight : This setting controls the backlight level and it can be set to Auto, Maximum, Minimum or Medium.

NOTE: Backlight can not be activate in VGA or Media Browser mode or while picture mode is set as Game.

Noise Reduction: If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount. Noise Reduction can be set to one of these options:

Low, Medium, High or Off.

Advanced Settings

• Dynamic Contrast: Sets the dynamic contrast rate.

• Colour Temp: Sets the desired colour tone.

Setting Cool option gives white colours a slight blue stress.

For normal colours, select Normal option.

Setting Warm option gives white colours a slight red stress.

• Picture Zoom: Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema.

• HDMI True Black: While watching from

HDMI source, this feature will be visible in the Picture Settings menu. You can use this feature to enhance blackness in the picture. You can set this feature as “On” for activating HDMI True Black mode.

• Film Mode (optional): Films are recorded at a different number of frames per second to

normal television programmes. Press “ ” or “ ” buttons to set this feature Auto or Off. Turn this

feature to Auto when you are watching lms to

see the fast motion scenes clearly.

• Skin Tone: Sets the skin tone level of your TV.

• Colour Shift: Adjust the desired colour tone.

• RGB Gain: You can configure the colour

temperature values using the RGB Gain feature.

Reset: Resets the picture settings to factory default settings.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode

settings will be added to the Picture Settings while in PC mode.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

PC Picture Controls

PC Picture Settings Operation

For adjusting PC picture items, do the following: Press “ ” or “ ” button to select Picture icon.

Picture menu appears on the screen.

Contrast, Brightness, Colour, Colour Temp and Picture Zoom, Reset settings in this menu are

identical to settings dened in TV picture settings

menu. Sound ,Settings and Source settings are identical to the settings explained in the main menu system.

PC Position: Select this to display PC position menu items.

Autoposition: Automatically optimizes the display. Press OK to optimize.

H Position: This item shifts the image horizontally to right hand side or left hand side of the screen.

V Position: This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock: Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase: Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

Quick Menu

The Quick Settings menu allows you to access some options quickly. This menu includes

Power Save Mode, Picture Mode, Favourites, Sleep Timer, FollowMe TV to DMR, CEC RC Passthrough, FollowMe TV (optional) and Information booklet options. Press Q.MENU

button on the remote control to view the quick menu. See the following chapters for details of the listed features.

FollowMe TV (optional)

With your tablet you can stream the current

broadcast from your smart TV using the FollowMe TV feature. Install the appropriate application to your tablet PC. Start the application.

For further information on using this feature refer to the instructions of the application you use.

FollowMe TV to DMR (optional)

This feature allows video streaming from your TV to another TV or mobile devices, using proper applications (e.g. UPnP - Universal Plug and Play - applications like BubbleUPnP). Activate FollowMe TV to DMR and timeshifting starts. Press the red button and device selection menu will be displayed. Choose your device and press OK.

Note: FollowMeTV and FollowMe TV to DMR features work correlated with the PVR feature and requires a connected USB storage device with FAT32 format and enough space in it. HD channels are not supported and both of the devices must be connected to the same network.

E-Manual

You can nd instructions for your TV’s features

in the E-Manual.

To use E-Manual, press to the Info button while main menu is displayed on the screen.

By using the navigation buttons select a desired category. Every category includes a different topics. Select a topic and press OK to read instructions.

To close the E-Manual screen press the Exit button.

Note: The contents of the E-Manual may vary according to model.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled devices, that are connected through HDMI ports by using the remote control of the TV.

The CEC option in the Other Settings menu under Settings menu should be set as Enabled

at rst. Press the Source button and select the

HDMI input of the connected CEC device from

the Source List menu. When new CEC source

device is connected, it will be listed in source menu with its own name instead of the connected HDMI ports name(DVD Player, Recorder 1 etc.).

The TV remote is automatically able to perform the main functions after the connected HDMI source has been selected.

To terminate this operation and control the TV via the remote again, press and hold the “0-Zero” button on the remote control for 3 seconds. Or press Q.Menu button on the remote, highlight the CEC RC Passthrough and set as Off by pressing Left or Right button. This feature can also be enabled or disabled under the Settings/ Other Settings menu.

The TV supports also ARC(Audio Return Channel) feature. This feature is an audio link meant to replace other cables between the TV and the audio system (A/V receiver or speaker system).

When ARC is active, TV does not mute its other

audio outputs automatically. So you need to decrease TV volume to zero manually, if you want to hear audio from connected audio device only (same as other optical or co-axial digital audio outputs). If you want to change connected device’s volume level, you should select that device from the source list. In that case volume control keys are directed to connected audio device.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Sound & Source Controls

Conguring Sound Settings

Sound settings can be congured according to

your personal preferences.

Press “MENU” button and select the rst icon by using “ ” or “ ” button. Press OK button

to view Sound Settings menu.

Operating Sound Settings Menu Items

Press “ ” or “ ” button to highlight a menu item. Use “ ” or “ ” button to set an item.

Press “MENU” button to exit.

Sound Settings Menu Items

Volume: Adjusts volume level.

Equalizer: Press OK button to view equalizer sub-

menu.

AVL : Automatic Volume Limiting (AVL) function

sets the sound to obtain xed output level between

programmes (For instance, volume level of advertisements tend to be louder than programmes).

Headphone/Lineout (optional): When you connect an external amplier to your TV using

the headphone jack, you can select this option as Lineout. If you have connected headphones to the TV, set this option as Headphone.

Dynamic Bass: Enables or disables the Dynamic Bass.

SRS TruSurround HD: Press “ ” or “ ” button to set SRS TruSurround HD as on or off. If you set SRS TruSurround HD as On, some features in the Sound menu can be unavailable to be set.

Digital Out: Sets digital out audio type.

Conguring Source Settings

You can enable or disable selected source options. The TV will not switch to the disabled source

options when “SOURCE” button is pressed.

Press “MENU” button and select Settings icon by using “ ” or “ ” button. Press OK button

to view Settings menu. Select Source and press OK button.

Select Sources in the Settings menu and press OK button.

In the equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the “MENU” button to return to the previous menu.

NOTE: Equalizer menu settings can be changed

manually only when the Equalizer Mode is in User.

Balance: This setting is used for emphasizing left or right speaker balance.

Headphone: Sets headphone volume.

Sound Mode: You can select Mono, Stereo, Dual

I or Dual II mode, only if the selected channel supports that mode.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Press “ ” or “ ” buttons to select a source. Use “ ” or “ ” button to enable or disable the

selected source. Changes are automatically stored.

Press RED button to edit the name of the selected source.

To view general conguration preferences, select

Other Settings in the Settings menu and press OK button.

General TV Operation

Other Controls

Hard of Hearing: If the broadcaster enables any

special signal concerning the audio, you can set this setting as On to receive such signals. Audio Description: Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary). You can use this feature, only if the broadcaster supports that additional

Operation

Press “ ” or “ ” buttons to select an item.

Use “ ” or “ ” button to set an option.

Press OK button to view a sub-menu.

Other Settings Menu Items

Menu Timeout: Changes timeout duration for

menu screens.

Active Antenna (optional): This feature enables

or disables the use of active antennas. When

antenna power option is set as On, +5V will be transmitted to the antenna output.

IMPORTANT: Antenna power should be Off when

standard antenna is used instead of the active antenna.

Scan Encrypted Channels: When this setting

is set as YES, search process will locate the encrypted channels as well. If it is set as NO, encrypted channels will not be located in automatic search or manual search.

HBB TV: This feature is activated/deactivated by selecting ON/OFF.

Blue Background: Activates or deactivates blue background system when the signal is weak or absent.

Software Upgrade: To ensure that your TV always has the most update information, you can use this setting. In order for the proper operation, please

ensure that the TV is set to standby mode.

You can enable or disable automatic upgrade by setting Automatic Scanning option.

You can manually search for new software by selecting Scan for upgrade.

Application version: Displays the current application version.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

narration track. Auto TV Off: You can set the timeout value of auto off feature. After the timeout value is reached and the TV is not operated for selected time, the TV will go off. Standby Search (optional): Use “ ” or “ ” button

to select Standby Search and then press “ ” or “ ” button to set this setting as On or Off. If you change Standby Search to Off, this function will be unavailable. To use Standby search please make sure that you select Standby Search as On. Store Mode: You can activate Store mode option by

using “ ” or “ ” button. If you are displaying the TV

in a store, you can activate this mode. While Store

Mode is enabled, some items in the TV menu may not be available to be set. DLNA Renderer: DLNA Renderer feature allows

you to share les stored on your smartphone. If you

have a DLNA Renderer compatible smartphone and software installed, you can share/play photos with your

TV. Use “ ” or “ ” button to enable or disable DLNA Renderer. See instructions of your sharing software for more information.

Power Up Mode: This setting congures the power up

mode preference. Use “ ” or “ ” button to set.

Always On: The TV always switches on when main on/off button is pressed. Standby: The TV always powers up in Standby mode. Last State: The TV always switches on with the last selected channel/source.

Virtual Remote (optional):Enables or disables the virtual remote feature.

CEC: With this setting you can enable and disable

CEC functionality completely. Press Left or Right button to enable or disable the feature.

Netflix: You can view your ESN(*) number and deactivate Netflix.(*) ESN number is an unique ID number for Netflix, created especially to identify your TV.

General TV Operation

Language Settings

You can operate the TV’s language settings using this menu.

Press “MENU” button and select the Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “

” button to highlight Language and press

OK to continue:

Use “ ” or “ ” button to set an item. Settings are stored automatically.

Menu: displays the system language.

Preferred

These settings will be used if available. Otherwise the current settings will be used.

Audio: Sets the preferred audio language.

Subtitle: Sets the subtitle language. Selected

language will be seen in subtitles.

Teletext: Sets teletext language.

Guide: Sets the preferred Guide language.

Current (*)

(*) These settings can be changed if only the broadcaster supports. Otherwise, settings will not be available to be changed.

Audio: Changes the audio language for the current channel.

Subtitle: Sets the subtitle language for the current channel.

NOTE: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below:

Language Settings

In the conguration menu, highlight the Language

Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen:

Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set.

NOTE:

System Language determines the on-screen menu language.

Audio Language is used for selecting the soundtrack of a channels.

Primary settings are the first priority when multiple choices are available on a broadcast. Secondary settings are the alternatives when

the rst options are not available.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Media Browser

Only available when a USB device is plugged into the TV.

Starting Media Browser

1. Press MENU button on the remote control

and select “Media Browser” pressing “ ” or “ ” button.

2. Press OK button to continue.

You can plug in two USB devices at the same time to your TV. If both USB devices include music, images and video, the USB Selection screen appears.

The USB device which is connected rst to the

TV set will known as a USB Drive 1.

3. Use the“ ” or “ ” button to select a device and press OK. Media Browser menu contents (depending on the contents of your USB drive) will be displayed. You can play music, picture

and video les from the connected USB memory

stick.

You can set your Media Browser preferences by using the Settings dialogue.

Operation

Press “ ” or “ ” button to highlight an item.

Use “ ” or “ ” button to congure an item.

View Style

Sets default browsing mode. Sets default browsing

mode as folder or at. Select “Directory” to display les in a folder or “Normal” to view les directly.

If you select the view style “Directory” the menu point “All” will appear in the media browser (See the section: Media playback using media browser). The option “All” gives you an overview of the directories images, music, videos.

Slide Show Interval

Sets slide show interval time.

Show Subtitle

Sets subtitle enabling preference.

Subtitle Language

Sets supported subtitle language.

Subtitle Position

Sets subtitle position as up or down.

Subtitle Font Size

Sets subtitle font size (max. 54pt).

Media Browser Conguration

Select Settings icon from the main media browser page to view the current preferences.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Media Browser - continued

Viewing Videos via USB

Viewing Photos via USB

1. Select Videos from the Media Browser screen and press OK button.

2. All video les will be ltered and listed.

3. Use “ ” or “ ” button to select a video le

and press OK button to play a video. Follow the information on the operations bar for using other commands.

Video Playback Screen

The following screen will be displayed while

playing a video le.

Subtitle Time Correction

Press YELLOW button during the video playback

for activating Subtitle Time Correction screen.

1. Enter an offset value using “ ” or “ ” button.

2. Press YELLOW button to conrm or press RETURN button to switch back to previous menu.

1. Select Photos from the Media Browser screen

and press OK button. All photo les will be ltered and listed.

2. Use “ ” or “ ” button to select a photo le and press OK button to play a video. Follow the information on the operations bar for using other commands.

Displaying Photos in Slideshow Mode

1. Press (PLAY) button when viewing photo

les to activate slideshow mode.

2. Press RETURN to go back to Photos screen. Follow the information on the operations bar for using other commands.

Playing Music via USB

1. Select Music from the Media Browser screen and press OK button. All music les will be ltered and listed.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Media Browser - continued

2. Use “ ” or “ ” button to select a music le

and press OK button to play. Follow the information on the operations bar for using other commands.

Using MENU button in Media Browser Mode

Pressing MENU button in Media Browser mode displays the following menu screen:

You can access Picture, Sound and Settings menu options using this screen. Press MENU again to exit from this screen.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Insallation Controls

Accessing Installation Menu

1. Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button.

2. Press “OK” button and the Installation screen

will be displayed.

Automatic Channel Scan (Retune)

1. In the Installation menu, select “Automatic Channel Scan (Retune)” by using “ ” or “ ” button and press OK button .

2. Options will be displayed. You can select options

by using “ ” or “ ” and OK buttons.

Menu Operations

Digital Aerial: Searches and stores aerial DVB stations.

Digital Cable: Searches and stores cable DVB stations.

Analogue: Searches and stores analogue stations

Digital Aerial & Analogue: Searches and stores

aerial DVB and analogue stations.

Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.

3. Whenever you select an automatic search type

and press OK button, a conrmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using “ ” or “

” and “OK” button.

4. After auto channel scan type is set and

selected and conrmed, installation process will

start and progress bar will move along. If desired, press “MENU” button to cancel process. In such a case, located channels are not stored.

Manual Channel Scan

1. In the Installation menu, select “Manual Channel

Scan” by using “ ” or “ ” button and press

OK button.

2. Manual Scan options screen will be displayed.

Select the desired “Search Type” using “ ” or

“ ” button. Manual search options will change

accordingly.

3. Enter the multiplex (for digital manual search), frequency, polarization, symbol rate, network channel scan, satellite options (for satellite manual search) or frequency number (for analogue manual search) using the numeric buttons and press OK button to start search.

Network Channel Scan

1. Select Network Channel Scan from the

installation menu by using “ ” or “ ” and press OK button. 2. Network Channel Scan selection screen will be displayed. Select Digital Aerial or Digital Cable and press OK button to continue. Refer to the Initial Installation section for more information on the process.

Analogue Fine Tune

1. Select “Analogue Fine Tune” from the Installation menu by using “ ” or “ ” and OK buttons.

Analogue ne tune screen will be displayed.

NOTE: Analogue Fine Tune feature will not be available if there are no analogue channels, digital channels and external sources stored.

2. Press OK button to proceed. Use “ ” or “ ”

button to set Fine Tune. When nished, press OK button again.

First Time Installation

Deletes all stored channels and settings, resets TV

to factory settings and starts rst time installation.

1. Select First Time Installation option and press OK button if you would like to reset the TV.

2. A warning screen will be displayed. Select YES

and press OK to continue. All prestored channels and settings will be deleted in such a case.

3. The TV will reset after a short time and language selection menu will be displayed.

4. Follow the steps in the Initial set up section.

Clear Service List

(*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland.

1. Use this setting to clear channels stored. Press “ ” or “ ” button to select Clear Service List and then press OK.

2. An OSD message will be displayed on the screen. Press OK to cancel or select Yes to delete all of the stored channels.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Parental Control

To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system. This function enables or disables the menu protection system and allows the PIN code to be changed.

1. Press “MENU” button and select the Settings icon by using “ ” or “ ” button.

2. Press OK button to view Settings menu. Use “

” or “ ” button to highlight Parental and press

“OK” to continue:

3. To display parental lock menu options, PIN

number must be entered. Factory default PIN number is 0000. After coding the correct PIN number, parental settings menu will be displayed:

Child Lock: When Child Lock is set, the TV can

only be controlled by the remote control. In this case the control panel buttons will not work, except

for the Standby Off/On button. When Child Lock is

activated you are able to switch the TV into Standby mode with the Standby Off/On button. To switch the TV on again, you need the remote control. Hence, if one of those buttons is pressed, Child Lock Is On will be displayed on the screen when the menu screen is not visible.

Set PIN: Defines a new PIN number. Use numeric buttons to enter a new pin number. You will need to code your new pin a second time for

verication purposes.

IMPORTANT: The factory default pin number is 0000 (except for the France), if you change the pin number make sure you write it down and keep it safe.

Parental Settings Menu Operation & Items

Select an item by using “ ” or “ ” button.

Use “ ” or “ ” button to set an item. Press OK button to view more options.

Menu Lock: Menu lock setting enables or disables the menu access. You can disable access to the installation menu or the whole menu system.

Maturity Lock (not available for the UK): When

set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

General TV Operation

Teletext

Analogue Teletext

Teletext system transmits information such as news, sports and weather on your TV. Note that is the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted.

Analogue Teletext

Teletext function buttons are listed below:

“ ” Teletext / Mix : Activates teletext mode when pressed once. Press again to place the teletext screen over the programme (mix). Pressing again will quit the teletext mode.

“RETURN” Index: Selects the teletext index page.

“INFO” Reveal: Shows hidden information (e.g. solutions of games).

“OK” Hold: Holds a text page when convenient. Press again to resume.

“ ” or “ Subcode Pages : Selects subcode pages if available when the teletext is activated.

P+ / P- and numbers (0-9): Press to select a page.

Note: Most TV stations use code 100 for their index pages.

Coloured Buttons

(RED/GREEN/YELLOW/BLUE)

Your TV supports both FASTEXT and TOP text

systems. When these systems are available, the pages are divided into groups or topics. When

FASTEXT system is available, sections in a teletext page will become colour-coded and can be selected by pressing the coloured buttons. Press a coloured button that corresponds to with your needs. The coloured writings will appear, showing you which coloured buttons to use when TOP text transmission is present. Pressing

“ ” or “ ” commands will request the next

or previous page respec tively.

Digital Teletext (for the UK only)

1. Press the “ ” button. The digital teletext

information appears on screen.

2. Operate using the coloured buttons, cursor buttons and OK button.

The operation method may differ depending on the contents of the digital teletext.

3. Follow the instructions displayed on digital teletext screen.

When “Press OK button” or similar message appears on the screen, press OK button.

When the “ ”” button is pressed, the TV returns to television broadcasting.

When you press the “ ” button again, the digital teletext screen will be displayed

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connectivity Functions

The modem port on the wall

Rear of TV

Connecting to a Wired Network

For connecting to a wired LAN network, you should perform the following steps:

• Connect broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem.

• Ensure that Nero Media Home software is installed to your PC.(for DLNA function).

See Appendix G for more information on the

installation process.

• Afterwards, you should connect your PC to the one of your modem’s LAN connectors (e.g. LAN 1) by using a proper LAN cable.

• Use another LAN output of your modem (e.g. LAN 2) to enable the connection to your TV. You can add your TV to your LAN by connecting the LAN port at the rear of your TV to your modem’s

LAN connector as illustrated (g.1).

• To access and play shared les, you must

Select Media Browser. Press Menu button and select Media Browser by using Left or Right button. Press OK to continue. Select the desired

le type and press OK. You must always use the

Media Browser screen to access and play shared

network les.

• PC/HDD/Media Player or any other devices

that are DLNA 1.5 compatible should be used with wired connection for higher playback quality.

To configure wired settings please refer Network Settings section in Settings menu.

Broadband ISP Connection

Lan(Ethernet cable)

g.1

Rear of TV

• You might be able to connect your TV to your LAN network depending on your network’s

conguration. In such a case, use an ethernet

cable to connect your TV directly to the network

wall outlet (g.2).

g.2

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connectivity Functions

Connecting to a Wireless Network

• To use your TV with your wireless network, you need a Veezy 200 Wireless USB dongle.

To make your modem’ s SSID visible, you should change your SSID settings via modem’s software. The TV cannot connect to the networks with hidden SSID.

For connecting to a wireless LAN network, you should perform the following steps:

1. Connect broadband ISP connection ethernet

cable to the ETHERNET INPUT of your modem.

2. Ensure that Nero Media Home software is

installed to your PC (for DLNA function).

3. To congure wireless settings please refer

Network Settings section in the following sections.

• A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous 2.4 and 5 GHz bands designed

to increase bandwidth. Optimized for smoother

and faster HD video streaming, le transfers, and

wireless gaming.

• Use LAN connection for quicker le sharing

between other devices like computers.

• The frequency and channel differ depending on the area.

• The transmission speed differs depending on the distance and number of obstructions between the transmission products, the configuration of these products, the radio wave conditions,

the line trafc, and the products that you use.

The transmission may also be cut off or get disconnected depending on the radio wave

conditions DECT phones, or any other WiFi

11b appliances. The standard values of the transmission speed are the theoretical maximum values for the wireless standards. They are not the actual speeds of data transmission.

• The location where the transmission is most effective differs depending on the usage environment.

• Wireless feature of TV supports 802.11 a,b,g & n type modems. It is highly recommended that

you should use IEEE 802.11n communication protocol in order to avoid any possible problems while watching videos.

Broadband ISP Connection

g.1

• You must change your modem’s SSID when

there are any other modems around with the same SSID. You can encounter connection problems otherwise. Use wired connection instead if you experience problems with wireless connection.

Your TV’s Network Settings include Wired and Wireless Connection options.

Conguring Wired Device Settings

If you are connecting the TV via ETHERNET INPUT, select Network Type as Wired Device

to congure.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connectivity Functions

Conguring Network Settings

Network Type

Network type can be selected as Wired or Wireless device, in accordance with the active

connection to the TV set. Select this as Wired if

you have connected to the TV a LAN cable. Select

as Wireless if you connect via the wirelessly.

Conguration Status

This section displays the status of the connection. Select Connected if you want to activate connection. Select as Not Connected to end an active connection.

IP Address

If an active connection is available, the IP address will be displayed on this section. If you want to congure IP address preferences, press GREEN button and switch to the advanced mode.

Conguring Wired Network Settings in

Advanced Mode

After pressing GREEN button, Advanced mode

will be available. While in Advanced Mode, press

RED button to edit settings. When nished, press OK to save, Press RETURN/BACK to cancel.

Configuring Wireless Device Settings (Optional)

Wi-Fi feature can be used for a wireless network

connection. The feature is used for infrastructure purposes only, such as connecting to the web, hbb sites and connecting with DLNA servers (optional). Select Network Type as Wireless Device to start connection process.

Press YELLOW button to scan wireless network from network settings menu. Afterwards, available network list will be displayed. Please select your desired network from the list.

If the selected network is protected with a password, please enter the correct key by using

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

the virtual keyboard. You can use this keyboard via navigation buttons (Left/Right/Up/Down) and OK button on the remote control.

Wait until the IP the address is shown on the

screen.

Press GREEN button to switch to advanced mode and then press OK button to edit settings. This means that the connection is now established. To disconnect from a wireless network, you should highlight Conguration Status and press OK.

You can navigate between menu tabs by pressing left/right buttons. The help bar on the bottom of the dialog shows features that you may use. Press BLUE button to check your internet connection speed.

You can check the signal strenght by using the network settings menu for the wireless device mode.

Information

Conguration Status: Displays wi- status as

connected or not connected.

IP Address: Displays the current IP address.

Network Name: Connected networks’ name will

be displayed.

Delete Saved Wi Proles

Saved proles will be deleted if you press red

button while wireless device selection osd is on the screen.

Connectivity Functions

Conguring Network Settings - continued

Connecting to your Cell Phone via WiFi (Optional)

• If your cell phone has WiFi feature, you can connect your cell phone to your TV by using WiFi

connection via a router, in order to play content from your phone. For this, your cell phone must have an appropriate sharing software.

• Connect to your router following the steps stated above in the Wireless Connection section.

• Afterwards, engage your cell phone with the

router and then activate sharing software on your

cell phone. Then, select les that you would like

to share with your TV.

• If the connection is established correctly, you should now access the shared les of your cell

phone via the Media Browser of your TV.

• Enter Media Browser menu and playback device selection OSD will be displayed. Select your cell phone’s ident and press OK to continue.

Note: This feature may not be supported by some cell phones.

WIRELESS DISPLAY

Wireless Display is a standard for streaming video and sound content by Wi-Fi Alliance. This feature

provides the ability to use your TV as wireless display device.

Using with mobile devices

There are different standards which enable sharing of screens including graphical, video and audio content between your mobile device and TV.

Plug the wireless USB dongle to TV rst, if the TV doesn’t have internal WiFi feature.

Then press the Source button on the remote and switch to Wireless Display source.

A screen appears stating that the TV is ready for connection.

Open the sharing application on your mobile device. These applications are named differently for each brand, please refer to the instruction manual of your mobile device for detailed information.

Scan for devices. After you select your TV and connect, the screen of your device will be displayed on your TV.

Note: This feature can be used only if the mobile device supports this feature. Scanning and connecting processes differ according to the programme you use. Android based mobile devices should have the software version V4.2 and above.

Connectivity Troubleshooting

Wireless Network Not Available

Ensure that the rewalls of your network allows

the TV wireless connection. “Veezy 200” usb

wi dongle(supplied with your TV) should be

plugged properly (if available). If the wireless network does not function properly, try using the wired network in your home. Refer to the

Wired Connection section for more information

on the process.

If the Net TV does not function, check the

modem (router) rst. If the router does not have

a problem, check the internet connection of your modem.

Try searching for wireless networks again, using the Network Settings menu screen.

Connection is Slow

See the instruction book of your wireless modem to get information on the internal service area, connection speed, signal quality and other settings. You need to have a high speed connection for your modem.

Distruption during playback or slow reactions

You could try the following in such a case:

Keep at least three meters distance from microwave ovens, mobile telephones, bluetooth

devices or any other Wi-Fi compatible devices. Try changing the active channel on the WLAN

router.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connectivity Functions

Using DLNA Network Service

DLNA (Digital Living Network Alliance) is a standard that eases viewing process of digital electronics and makes them more convenient to use on a home network. For further information, visit www.dlna.org.

DLNA standard allows you to view and play photos, music and videos stored in the DLNA media server connected to your home network.

Step 1: Nero Media Home Installation

DLNA function cannot be used if the server program is not install to your PC. Please prepare your PC with the Nero Media Home programme.

For more information about the installation, please refer to appendix.

Step 2: Connect to a Wired or Wireless Network

See the chapter Network Settings for detailed

conguration information.

Step 3: Play Shared Files via Media Browser

Select Media Browser by using Left or Right button from the main menu and press OK button. Media browser will be then displayed.

DLNA support is available only with Media Browser folder mode. To enable folder mode, go to Settings tab in the main media browser screen and press OK. In the settings options, highlight View Style and change to Folder using Left or Right button.

Please select desired media type and press OK.

If sharing congurations are set properly, the

following OSD message will be displayed after selecting the desired media type. Select OK to display the selected network or USB memory content. If you want to refresh the device list, press GREEN button. You can press MENU to exit.

If available networks are found, they will be listed on this screen. Select media server or network that you want to connect by using “ ” or “ ” buttons and press OK button.

If you select media type as Video and choose a device from the selection menu, a new menu screen will appear on the screen as below:

Select Videos from this screen to list all the

available video les from the selected network.

To play other media types from this screen, you must go back to main Media Browser screen and select media type as desired and then perform the network selection again. Refer to Media Browser USB Playback section for further

information on le playback.

Subtitle les do not work if you watch video from

network through DLNA.

You can connect only one television with DLNA to same network. If a problem occurs with DLNA network, please switch on/off your television. Trick mode and jump are not supported with DLNA function.

CAUTION:

There may be some PC’s which may not be able to utilize the DLNA function due to administrator and security settings. (such as business PC’s).

For best home network streaming with this set, the Nero software should be installed.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Connectivity Functions

Internet Portal )

You can access the PORTAL mode using your TV. To do this, an active internet connection is required. Follow the steps on Connecting to

a Wired/Wireless Network section to connect

your TV to the internet. After the connection is established, you can select or view portal options.

Note: A broadband internet connection is required for high quality viewing. Ensure that the internet connection is made properly. You must set the Country and Language data correctly in the First Time Installation for the proper operation of internet portal.

Press “ ” button on your remote control and the portal application options will be displayed. Application options will be displayed as shown in the template below. Available applications’ contents may change depending on the application content provider.

Note on PIP Window

If you switch to portal mode while watching TV channels, current programme will be displayed on the PIP window. You can change channels using P+/P- buttons.

Current HDMI content will be displayed on the PIP window, if you switch to portal mode while watching HDMI source.

Use the “ ” or “ ”, “ ” or “ ” to navigate between the items on Portal screen. Press the

OK button to conrm your selection. Press the BACK button to go to the previous screen.

Press the EXIT button to quit the Internet portal mode.

Note: Some applications might become disabled due to changes made in the parental settings.

iPlayer Application

You can access BBC iPlayer using your TV. To do this, an active internet connection is required.

(See connecting to a Wired/Wireless Network

section to connect your TV to internet). After the connection is established, you can select BBC iPlayer among the portal options. (See Internet Portal)

Press the OK button on your remote control to start the BBC iPlayer application.

Note: Broadband internet connection (minumum 2mbps) is required for high quality viewing.

Playing a Programme via iPlayer

Select a programme and press OK button. The programme playback will begin.

You can press the PAUSE button to pause playback. Press the PLAY button to resume the playback.

Use the STOP button to stop the playback.

Press the EXIT button to exit iPlayer. Press the RETURN button for going back to the previous screen.

Note: “Episode is unavailable.” message may be displayed on the screen if a problem occurs during the playback.

Searching a Programme

Highlight the Search tab using the navigation buttons and press the OK button. Use the virtual keyboard to type the letters. Select letters and press the OK button. When nished, highlight Search option and press the OK button.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Internet Browser

To use the internet browser, please select the internet browser logo from the portal section.

Home Page

Remote control shortcuts

(Zoom in-out/Back/Home)

Previous Next

Refresh

• To navigate the web browser, use the arrow buttons on the remote control. Press OK to continue.

• After First time installation, predened web sites

and logos will be displayed on the browser’s access page (see image above). To add a desired web page to the quick access page, whilst on the website you wish to add, select the “Add” menu and select “Quick Access” button.

• If you want to add bookmarks, select this item while the desired web page is on the screen.

Add

Bookmarks

Quick Access

• You can navigate the web browser in three ways. First, enter any URL in the address bar.

Address Bar

History

Add

Quick Access

Bookmarks

Zoom

Settings

navigate to pages is by clicking on links on web pages and these will take you to the appropriate pages.

• When you scroll the pointer down to the middle of

the screen, the remote control’s shortcuts will be shown.

• Use the zoom shortcut buttons or the zoom menu to zoom in or zoom out.

• You can clear cookies or clear all browser data from the settings menu.

• Your TV is compatible with USB mice. Plug your mouse or wireless mouse adaptor to the USB input of your TV.

• To view your browsing history, click the history button. You can also clear your browsing history from here.

• The browser does not support multiple tabs.

• Some internet pages include ash content. These

are not supported by the browser.

• You can search keywords by clicking the search button in the address dialog box or another way to

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

• Your TV does not support any download processes from the web browser.

Connectivity Functions

Appendix: Nero MediaHome Installation

To install Nero MediaHome, please proceed as follows:

Note: To use DLNA function, this software should be installed to your PC.

1. Enter the link below completely in the

adress-bar of your web browser.

http://www.nero.com/mediahome-tv

2. Click the Download button on the opening

page. The installation le will be downloaded

onto your PC.

3. After the download is completed, double

click on the installation le to start the

installation. The installation wizard will guide you through the installation process.

4. The prerequisites screen will be displayed

rst. The installation wizard checks the

availability of required third-party software on your PC. If applications are missing they are listed and must be installed before continuing installation.

5. Click the Install button. The integrated

serial will be displayed. Please do not change the displayed serial.

6. Click the Next button. The License

Conditions (EULA) screen will be displayed. Please read the license agreement carefully and select the appropriate check box if you agree to the terms of the agreement. Installation is not possible without this agreement.

7. Click the Next button. On the next screen

you can set your installation preferences.

8. Click the Install button. The installation

begins and nishes automatically. A progress

bar will indicate the state of the installation process.

9. Click the Finish button. The installation is completed. You will be directed to the web site of the nero software.

10. A shortcut is now placed on your desktop.

Congratulations! You successfully installed

Nero MediaHome on your PC.

Run Nero MediaHome by double clicking on the shortcut icon.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Support

TV Operation Troubleshooting

Image persistence - ghosting

Please note that ghosting may occur while displaying a persistent image (still or paused image). LCD TVs’ image persistence may disappear after a short time. Try turning off the TV for a while. To avoid this, do not leave the screen in still picture mode for extended periods.

No power

If your TV has no power, please check the power cord plug is connect to the mains power socket.

Poor picture

1. Have you selected the correct TV system?

2. Is your TV or house aerial located too close to a

non-earthed audio equipment or neon lights, etc.?

3. Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable?

4. Check if you have entered the correct frequency.

5. Please retune the channels.

6. The picture quality may degrade when two

devices are connected to the TV at the same time. In such a case, disconnect one of the devices.

No picture

1. No Picture means that your TV is not receiving

a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.

2. Is the aerial connected properly?

3. Are the plugs connected tightly to the aerial

socket?

4. Is the aerial cable damaged?

5. Are suitable plugs used to connect the

aerial?

6. If you are in doubt, consult your dealer.

No sound

1. Has the TV been set to mute? To cancel

mute, press the “ ” button, or increase the volume level.

2. Sound is coming from only one speaker. Is the balance set to one extreme? See Sound Menu section.

3. If there is no digital amplier, the option PCM in the SPDIF OUTPUT menu should be activated. Otherwise there will be no sound output from the speakers.

Remote control - does not operate

Your TV no longer responds to the remote control. The batteries may be exhausted, if so you can still use the control buttons on the left side of the TV. (* Is only possible if they are not blocked by parental control.)

Input sources - can not be selected

1. If you cannot select an input source, it is

possible that no device is connected.

2. Check the AV cables and connections if you have tried to connect a device.

No channels for this type have been found.

1. Selected Network Type does not include any

stored channels.

2. Check the signal cables.

If nothing works..

If you have tried the above solutions and none seem to work, try switching your TV off and on again. If this does not work, contact your supplier or TV repair technician. Never attempt to repair a defective TV yourself.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Support

General Specications

TV Broadcasting PAL/SECAM B/G D/K K’ I/I’ L/L’

Receiving Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND

Number of Preset Channels 1000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio SRS TruSurround HD

Audio Output Power (WRMS.) (10% THD)

Power Consumption 75 W

Weight 13,10 kg (with foot) / 12,10 kg (without foot)

TV Dimensions DxLxH (with foot) 220 x 1093 x 681

TV Dimensions DxLxH (without foot) 81/99 x 1093 x 642

VESA 400 x 400 mm / M6

Display 16:9 display, 122 cm / 48” Screen Size

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks,

or certication marks of the Digital Living Network Alliance.”

2 x 8

“HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.”

i s a trademark of SRS Labs, Inc. TruSurround technology is incorporated under

license from SRS Labs, Inc.

SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialog.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Support

Plug replacement - UK and Ireland only

Should you need to replace the plug; the wires in the power cable are coloured in the following way:

Blue – Neutral ‘N’ Brown – Live ‘L’

Green & Yellow – Earth ‘E’

As the colours of the wires in the power cable may not correspond with the coloured markings identifying the terminals in your plug, and proceed as follows:

The green & yellow wire must be connected

to the terminal in the plug that is marked with the letter E or by the earth symbol.

The blue wire must be connected to the terminal that is marked with the letter N.

The brown wire must be connected to the terminal that is marked with the letter L.

If the power lead is damaged, it must be

replaced by a qualied electrician.

Connect blue lead to ‘N’ Neutral

Connect green/yellow lead to ‘E’ or - Earth

5A Fuse

Connect brown lead to ‘L’ - Live

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Support

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

• Simple help and advice on setting up your digital

equipment (image).

• Guidance on connecting other devices to your

television such as a DVD player, Sky, home cinema system or a games console.

• Order spare parts, including that lost remote

control.

• Any other technical issues you may need

assistance with.

Call us today: 0 345 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

For Security and training purposes, telephone calls to and from customer service centres maybe recorded and monitored. Calls from Republic of Ireland will attract international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Support

Supported File Formats for USB Media Browser

Media Extension Format Notes

Video Audio

Movie dat, mpg,

mpeg

dat, mpg, mpeg

.vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM

.mkv MPEG1,2,4, XviD, H.264,

.mp4 .mov MPEG1/2 Layer 3, AAC/HEAAC,

RMVB, RM rv30, rv40 LBR(cook), AAC/HEAAC

avi MPEG1,2,4 , Xvid H.264,

Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/

HEAAC, AC3/EAC3, LPCM/ ADPCM

MPEG2 ,H.264, VC1, AVS,

MVC

MPEG1/2 Layer 1/2/3, AAC/

HEAAC, AC3/EAC3, LPCM/ ADPCM

MPEG1/2 Layer 1/2/3, AAC/

VC1,WMV3, Motion JPEG

HEAAC,

AC3/EAC3, LPCM

AC3/EAC3, LPCM/ADPCM

MPEG1/2 Layer 1/2/3, AAC/ VC1,WMV3, Sorenson H.263 Motion JPEG

HEAAC, AC3/EAC3, LPCM/

ADPCM, WMA

1080P@ 30fps 50Mbit/sec

H.264:1080Px2@25fps 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps” 50Mbit/sec

1080P@ 30fps 50Mbit/ sec

H.264:1080Px2@25fps 1080P@ 50fps Other:1080P@ 30fps 50Mbit/sec

H.264: 1080Px2@25fps 1080P@ 50fps Other: 1080P@ 30fps 50Mbit/sec

1080P@ 30fps 50Mbit/sec

H.264: 1080Px2@25fps 1080P@ 50fps Other: 1080P@ 30fps” 50Mbit/sec

v H.264,

Sorenson H.263

MPEG1/2 Layer 3, AAC/HEAAC,

LPCM/ADPCM

3gp,3g2 MPEG4, H.264

asf, wmv MPEG2,4, XviD, H.264,

Music .mp3

.wav LPCM

WMA/ASF WMA, WMA Pro

VC1,WMV3

MPEG1/2 Layer 1/2/3, AAC/

HEAAC, AC3/EAC3, LPCM, WMA

MPEG1 Layer 1/2/3 (MP3)

.m4a/ .aac AAC, HEAAC

Photo .jpg .jpeg Baseline JPEG

.png Progressive JPEG

.bmp non-interlace

Subtitle

.png

sub - -

interlace

srt - -

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

H.264:1080Px2@25fps 1080P@ 50fps Other: 1080P@ 30fps 50Mbit/ sec

1920x1080 @ 30P 20Mbit/sec

1080P@ 30fps 50Mbit/sec

MAX WxH =

14592x12288

Up to 8 MegaByte

Product Support

AV and HDMI Signal Compatibility & Typical PC Resolutions

Source

EXT-1

(SCART1)

Side AV

YPbPr

HDMI1

HDMI2

Supported

Signals

PAL O

NTSC 60 O

RGB 50/60 O

SECAM O

PAL 50/60 O

NTSC 60 O

SECAM O

480I 60Hz O

480P 60Hz O

576I 50Hz O

576P 50Hz O

720P 50Hz O

720P 60Hz O

1080I 50Hz O

1080I 60Hz O

480I 60Hz O

480P 60Hz O

576I 50Hz O

576P 50Hz O

720P 50Hz O

720P 60Hz O

1080I 50Hz O

1080I 60Hz O

24Hz

25Hz

1080P

30Hz

50Hz

60Hz

Available

Index Resolution Frequency

1 640x400 70Hz

2 640x350 85Hz

3 640x400 85Hz

4 640x480 60Hz

5 640x480 66Hz

6 640x480 72Hz

7 640x480 75Hz

8 640x480 85Hz

9 800x600 56Hz

10 800x600 60Hz

11 800x600 70Hz

12 800x600 72Hz

13 800x600 75Hz

14 800x600 85Hz

15 832x624 75Hz

16 1024x768 60Hz

17 1024x768 66Hz

18 1024x768 70Hz

19 1024x768 72Hz

20 1024x768 75Hz

21 1024x768 85Hz

22 1152x864 60Hz

23 1152x864 70Hz

24 1152x864 75Hz

25 1152x864 85Hz

26 1152x870 75Hz

27 1280x768 60Hz

28 1360x768 60Hz

29 1280x768 75Hz

30 1280x768 85Hz

31 1280x960 60Hz

32 1280x960 75Hz

33 1280x960 85Hz

34 1280x1024 60Hz

35 1280x1024 75Hz

36 1280x1024 85Hz

37 1400x1050 60Hz

38 1400x1050 75Hz

39 1400x1050 85Hz

40 1440x900 60Hz

41 1440x900 75Hz

42 1600x1200 60Hz

43 1680x1050 60Hz

44 1920x1080 60Hz

45 1920x1200 60Hz

(X: Not Available, O: Available)

In some cases a signal on the LCD TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

The display has a maximum resolution of 1920 x 1200. The table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed above. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.

Product Support

Supported DVI Resolutions

When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you

can refer to the following resolution information.

56Hz 60Hz 66Hz 70Hz 72Hz 75Hz

640x400

640x480

800x600

832x624

1024x768

1152x864

1152x870

1280x768

1360x768

1280x960

1280x1024

1400x1050

1440x900

1600x1200

1680x1050

1920x1080

1920x1200

þ þ þ þ

þ þ þ þ þ

þ þ þ

þ þ

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Support

Digital Reception (DVB-T)

MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Prole 1 - for UK

Object carousel support compliant with ISO/IEC 135818-6 and UK DTT prole - for UK

Frequency range: 474-850 MHz for UK models

170-862 MHz for EU models

Transmission standard: DVB-T. MPEG-2, MPEG-4.

Demodulation: COFDM with 2K/8K FFT mode

FEC: all DVB models

Video: MP@ML, PAL, 4:3/16:9

Audio: MPEG Layer I&II 32/44.148kHz.

Digital Reception (DVB-C)

Transmission Standards: DVB-C, MPEG2, DVB-C, MPEG4

DEMODULATION : -Symbolrate: 4.0 Msymbols/s to 7.2 Msymbols/s - Modulation: 16-QAM , 32QAM ,64-QAM, 128-QAM and 256-QAM

VIDEO - All MPEG2 MP@ML formats with up-conversion and ltering to CCIR601 format. -CVBS

analogue output

AUDIO -All MPEG1 Layer 1 and 2 modes -Sampling frequencies supported are 32, 44.1 & 48

kHz.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Support

Software Upgrade

Your TV is capable of nding and updating new

software upgrades over broadcast channels.

For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels.

1) Software upgrade search via user interface

It is possible manually to check if there is a new software upgrade for your TV set.

Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.

In Upgrade Options menu select Scan for upgrade and press OK button.

You can enable or disable automatic upgrade by

setting Automatic Scanning option.

If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the

remaining download progress. When download

completes with success a message is displayed for reboot to activate new software. Press OK to continue with the reboot operation.

2) 3.AM search and upgrade mode

If Automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and searches broadcast channels for new software upgrade. If new software is found and downloaded successfully, with next power up TV opens with new software version.

Note on reboot operation: Reboot is the last step in software upgrade operation if download of new

software is nished successfully. During reboot TV makes nal initializations. In reboot sequence

panel power is closed and front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.

If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few times more. If your set still can not operate, please call the

service personnel to x the problem for you.

CAUTION: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause your TV not to re-open again and can

only be xed by service personnel.

NOTE: A software update is dependent on whether the TV stations of each country support it.

Manual Software Update

Ensure that the ethernet cable is connected to your TV. If the ethernet cable is connected to the TV, ensure that the TV is receiving.

Menu -> Settings -> Network Settings ->

Conguration Status -> Connected

Go to Settings tab from the main menu and select

Other Settings. Highlight Software Upgrade and press OK. Select Scan for Upgrade and press OK button.

An OSD screen including the progress bar will be visible under the Software upgrade” title.

A warning screen will be displayed on the screen, stating that the TV will be rebooted. Press OK

button to nalize upgrade process and reboot

TV.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Support

Disposal information

Instructions for waste disposal:

Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.

The cold cathode uorescent lamp in LCD PANEL contains a small amount of mercury; please follow

the local laws or regulations for disposal.

Information for Users on Disposal of old Equipment and Batteries

(European Union only)

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.

Battery

Products

For more information, please contact the local authority or the dealer where you purchased the product.

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Guarantee

Product Guarantee

This product is guaranteed against manufacturing defects for a period of

Year

This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.

The guarantee is subject to the following provisions:

• The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items.

• The product must be correctly installed and operated in accordance with the

instructions contained in this manual.

• It must be used solely for domestic purpose.

• The guarantee will be rendered invalided if the product is re-sold or has been

damaged by inexpert repair.

• Specifications are subject to change without notice.

• The manufacturer disclaims any liability for the incidental or consequential damages.

• The guarantee is in addition to, and does not diminish your statutory or legal rights.

• In the event of a problem with the product with in the guarantee period call the

Customer Helpline: 0 345 604 0105

Guarantor: Argos Ltd

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Product Fiche

Product No. 10094711

Model No. DLED48265FHDCNTD

Energy eciency class A+

Visible scree n si ze

(diagonal,approx.) (inch/cm)

On mode average power

consumpon (Wa)

A nnua l e nergy c onsump o n

(kWh/annum)

S ta n dby p owe r co n sum p o n

(Wa)

O  m o de po w er c ons u mp o n

(Wa)

Display resoluon (px) 1920x1080

Commercial Brand:BUSH

48 inches 122 cm

0,5

For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105

Home Retail Group

489-499 Avebury Boulevard

Saxon Gate West

Central Milton Keynes

MK9 2NW

Bush DLED48265FHDCNTD Instruction manual

Specifications and Main Features

Frequently Asked Questions

User Manual