Bush DLED40127FHDS Instruction manual

40” LED TV

Installation & Operating Instructions - Please keep for future reference

129/1753

DLED40127FHDS

APPROVED

IMPORTANT - Please read these instructions fully before installing or operating

These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.

For any help concerning set up and use of your TV please call the

Customer Helpline: 0044

Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

845 604 0105

Issue 1 - 9/2/11

Contents

Safety Information 3
Preparation 3
Intended Use 3
Power source 3
Positioning the TV 3
Power cord and plug 3
Moisture and Water 4
Ventilation 4
Heat sources and Flames 4
Headphone Volume 4
Wall Mounting (optional) 4
Cleaning 4
Batteries 4
Replacement Parts 5
Servicing 5
Taking out of service and storing 5
Connection to a Television Distribution System

(Cable TV etc.) from Tuner 5
Symbols in this Instruction Book 5
Support 6
Getting Started 7

Notications & Features & Accessories 7

Environmental Information 7

Standby Notications 7

Features 7

Accessories Included 7

Control Buttons on the TV 8

TV Control Switch & Operation 8

Inserting the Batteries into the Remote 8
Connect Power 8

Antenna Connection 8
Notication 9
Specication 9

Remote Control 10

Attaching the Stand 11

Connections 12

Switching On/Off 13

To Switch the TV On 13
To Switch the TV Off 13

First Time Installation 13

Aerial Installation 13

Media Playback via USB Input 13
Media Browser Menu 13
TV Menu Features and Functions 14

Picture Menu Contents 14

Advanced Settings 14

Sound Menu Contents 15
Settings Menu Contents 15

Other Settings: Displays other setting options of the
TV set: 15

Install and Retune Menu Contents 16

General TV Operation 17

Using the Channel List 17

Conguring Parental Settings 17

Electronic Programme Guide (EPG) 17
Software Upgrade 17

Software upgrade search via user interface 17
Background search and upgrade mode 17

3 AM search and upgrade mode 17

Troubleshooting & Tips 18

Tv will not turn on 18
Poor picture 18
No picture 18
No sound 18
Remote control - does not operate 18

Input sources - can not be selected 18
Quick Menu 18
Teletext 18
Digital Teletext (for UK only) 18
PC Input Typical Display Modes 19

Other Information 19

Supported File Formats for USB Mode 19

AV and HDMI Signal Compatibility 19
Other Information 20

Plug replacement - UK and Ireland only 20

The Argos Technical Helpline is here to help 21

Guarantee 22

Model number

BUSH DVB-T DLED40127FHDS

2

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Safety Information

If there is lightning or storms, or if the TV is not
going to be used for a while (e.g. if going away
on holiday), disconnect the TV set from the

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

To operate your TV in extreme ambient conditions
may cause the damage of the device.

NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note : Follow the on screen instructions for operating the
related features.

mains. The mains plug is used to disconnect TV
set from the mains and therefore it must remain
readily operable.

The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

IMPORTANT - Please read these instructions fully before installing or operating

Preparation

Place the device on a solid even surface. For
ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, do not place any objects on top of the set.
Use this device in moderate climates.

Operation temperature and operation humidity:
5ºC up to 45ºC, 85% rel. humidity max. (not blocking
ventilation openings).

Intended Use

This device is used to receive and display TV
programmmes.The different connection options make
an additional expansion of the reception and display
sources possible (various external devices). This device
is only suitable for dry interior use. This appliance is
intended solely for private domestic use and may not
be used for industrial and commercial purposes. We
exclude liability in principle, if the device is not used

as intended, or unauthorized modications have been

made. To operate your LED TV in extreme ambient
conditions may cause the damage of the device.

WARNING: Never let people (including

children) with physical, sensory or mental
abilities or lack of experience and / or knowledge
unsupervised use electrical device!

Children may not recognize dangers right! The
swallowing of batteries can be fatal. Keep batteries
always out of reach of small children. If a battery
is swallowed, seek immediate medical attention.

Keep the packaging lms out of reach of children,

there is a risk of suffocation.

Power source

• The TV should be operated only from a 220-240V
AC, 50 Hz outlet.

Positioning the TV

• For ventilation, please leave a clear space of at least

10cm all around the TV.

• Do not block the ventilation openings.

• Do not place the TV on sloping or unstable surfaces,

the TV may tip over.

• To prevent damage to the TV, do not place any

objects on top of the TV.

• Only use the TV in moderate climates.

Power cord and plug

• The power cord plug should be easily accessible.

In case of storms and lightning, when going on
holiday, or when the TV is not used for a long period
of time disconnect the power cord from the mains
power socket.

• The mains plug is used to disconnect TV set from

the mains and therefore it must remain readily
accessible.

• Do not place the TV, furniture, etc. on the power

cord or pinch the cord.

• Handle the power cord by the plug, do not unplug

the TV by pulling the power cord.

• Never touch the power cord/plug with wet hands

as this could cause a short circuit or electric shock.

• Never make a knot in the power cord or tie it with

other cords.

• Power cords should be placed in such a way that

they are not likely to be stepped on or driven over.

• A damaged power cord/plug can cause re or give

you an electric shock. When damaged it must be

replaced, this should only be done by qualied

personnel.

• Warning: Do not leave your TV in standby or
operating mode when you leave your house.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

3

Safety Information

Moisture and Water

• Do not use this TV in a humid or damp place (avoid

bathrooms, the sink in the kitchen, etc.

• Do not expose this TV to rain or water, as this may

be dangerous.

• Do not place objects lled with liquids, such as

ower vases, on top of the TV. Avoid from dripping

or splashing.

• If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualied

personnel before operating it any further.

Ventilation

• The slots and openings on the TV set are intended
for ventilation and to ensure reliable operation.

• To prevent overheating, these openings must not
be blocked or covered in anyway.

Heat sources and Flames

• Do not expose the TV to direct sunlight
or other heat sources.

• The TV should not be placed near to
open ames and sources of intense

heat such as an electric heater.

• Ensure that no open ame sources, such as lighted

candles, are placed on top of the TV.

Headphone Volume

• Excessive sound pressure from earphones
and headphones can cause hearing loss,
please take care.

Wall Mounting (optional)

• To prevent injury, this TV must be securely attached
to the wall in accordance with the installation
instructions (if the option is available).

Cleaning

• Before cleaning, unplug the TV from the wall socket.

• Do not use liquid or aerosol cleaners. Only use a

soft, dry cloth.

Batteries

• Warning: Incorrect installation of

batteries may cause battery leakage
and corrosion, resulting in damage to
the remote control.

• Do not mix old and new batteries, or

batteries of different types.

• Do not dispose of batteries in a re.

• Do not dispose of batteries with normal household

waste, take to a local recycling centre.

CAUTION: Insert the batteries / rechargeable
batteries in the correct polarity. Don´t try to
recharge non rechargeable batteries and under

no circumstances throw them into re. Danger of

explosion. Do not use unequal batteries (old and

new, Alkaline and carbon, etc.) simultaneously. If

you will not use the device for a long time, remove
the batteries and store the device in a dry and dust
free place. Improper use of batteries may cause an
explosion or leakage. If the batteries have leaked, use
gloves and clean the appliance thoroughly with a dry
cloth! Batteries should not be exposed to heat, such

as sunshine, re or the like.

4

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Safety Information

Replacement Parts

When replacement parts are required, make sure that
the service technician has used replacement parts,

which are specied by the manufacturer or have the
same specications as the original one. Unauthorised
substitutions may result in re, electrical shock or

other hazards.

Servicing

• Warning: Risk of electric shock, do not attempt

to repair, service or modify this TV yourself. Contact
the manufacturer, their approved service agent or
the Customer Helpline: 0845 604 0105.

Taking out of service and storing

Unplug the TV from the mains and pack the TV in
an appropriate cardboard box. Remove the batteries
from the remote control and pack the remote control
to the TV set.

NOTE: The TV set should be stored in a dry and dust-

free room.

Symbols in this Instruction Book

The following symbols are used in the Instruction
Book as a marker for restrictions and precautions
and safety instructions. Note such information for
security reasons.

WARNING

If you do not pay attention to such a marked warning,
it can cause serious injury or death. Note these
warnings strictly, in order to ensure a safe operation.

CAUTION

Such a precaution is marked, you should take up or
note, to avoid injury or property damage. Note these
instructions strictly, in order to ensure a safe operation.

IMPORTANT

Warnings on the appliance and restrictions are
displayed like this. Read this information strictly
in order to operate the system correctly and avoid
damage.

NOTE: Information about the operation and
additional explanations are marked like this. To be
aware of such information is recommended to ensure
that the functions can be used optimally.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

5

Support

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

• Simple help and advice on setting up your digital

equipment (image).

• Guidance on connecting other devices to your

television such as a DVD player, Sky, home cinema
system or a games console.

• Order spare parts, including that lost remote

control.

• Any other technical issues you may need

assistance with.

Call us today: 0044 845 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential

lines depending on your call plan/tariff. Mobile and other providers costs may vary,
see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.

6

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Getting Started

Notications & Features & Accessories

Environmental Information

This television is designed to consume less energy
to help save the environment. To reduce energy

consumption, you should take the following steps:

If you set the Power Save Mode as Eco, the TV will
switch to energy-saving mode. The Power Save Mode
settings can be found in the ‘Picture’ section of the
Main Menu. Note that some picture settings will be
unavailable to be changed.

If Picture Off is selected, “Screen will be off in
3 seconds.” message will be displayed. Select
PROCEED and press OK to continue. The screen

will be off immediately.

When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.

Standby Notications

1) If the TV does not receive any input signal (e.g.
from an aerial or HDMI source) for 5 minutes, the TV
will go into standby. When you next switch-on, the

following message will be displayed: “Standby Cause
No Signal” Press OK to continue.

2) If the TV has been left on and not been operated
for a while, the TV will go into standby. When you next
switch-on, the following message will be displayed.
“Standby Cause No Operation” Press OK to
continue.

Features

• Remote controlled colour TV.

• Fully integrated digital TV (DVB-T)

• HDMI inputs are for connecting a device that has

a HDMI socket.

• USB input.

• OSD menu system.

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system.

• Teletext.

• Headphone connection.

• Automatic programming system.

• Manual tuning.

• Automatic power down after up to six hours.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista,

Windows 7.

• Game Mode (Optional).

Accessories Included

• Remote Control

• Batteries: 2 x AAA

• Instruction Book

• Quick Start Guide

• Side AV Connection Cable

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

7

Control Buttons on the TV

+

+

-

-

TV Control Switch & Operation

Inserting the Batteries into the Remote

Lift the cover on the back of the remote upward
gently. Install two AAA batteries. Make sure to
match the + and - ends of the batteries in the
battery compartment (observe the correct polarity)
Replace the cover.

Connect Power

IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow

the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.

Antenna Connection

Connect the “aerial” plug to AERIAL INPUT (ANT)

socket located on the back of the TV.

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection

switch

The Control button allows you to control the Volume/

Programme/ Source and Standby-On functions of

the TV.

To change volume: Increase the volume by pushing

the button up. Decrease the volume by pushing the
button down.

To change channel: Press the middle of the button,

the channel information banner will appear on screen.
Scroll through the stored channels by pushing the
button up or down

To change source: Press the middle of the button

twice, the source list will appear on screen. Scroll
through the available sources by pushing the button
up or down.

To turn the TV off: Press the middle of the button down

and hold it down for a few seconds, the TV will turn
into standby mode.

8

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Notication

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.

“HDMI, the HDMI logo and High-Denition Multimedia

Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”

Information for Users on
Disposal of Old Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the
product or battery, please consider the collection
systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates

that this battery contains lead.

Battery

Products

Specication

TV Broadcasting PAL B/G D/K K

Receiving Channels VHF (BAND I/III) - UHF

Number of Preset
Channels

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio German+Nicam Stereo

Audio Output Power
(WRMS.) (10% THD)

Power Consumption 100 W

TV Dimensions DxLxH
(with foot)

TV Dimensions DxLxH
(without foot)

Operation
temperature and

(BAND U) - HYPERBAND

1000

2 x 8

220 x 930 x 592

70 x 930 x 554

5ºC up to 45ºC, 85%
humidity max

operation humidity:

VESA 200 x 200 mm / M6

Display 16:9 display, 102 cm / 40”

Screen Size

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

9

Getting Started

V

V

SCREEN

LANG

SUBTITLE

MENU

RETURN

OK

SOURCE FAV

PRESETS SLEEP

?

INFO

EPG

V+

V- P-

P+

1

2

3

4

6

5

9

7 8

0

V

8

9

10

11

15

28

29

12
13
14

16

17

27

26

25

20

23

22

21

19
18

1

2

3
4

5
6

7

24

30

Remote Control

1. Standby

2. Mono/Stereo - Dual I-II / Current language

3. Image size

4. Green button

5. Red button

6. Numeric buttons

7. Teletext - Mix

8. Cursor left

9. Menu on/off

10. AV / Source

11. Favourite mode selection

12. Volume up

13. Info / Reveal (in TXT mode)

14. Mute

15. Volume down

16. Programme down / Page up

17. Electronic Programme Guide (EPG)

18. Programme up / Page down

19. Sleep timer

20. Picture mode selection

21. OK / Select / Hold (in TXT mode) / Channel list

22. Cursor down

23. Return / Index page (in TXT mode)

24. Cursor right / Subpage (in TXT mode)

25. Cursor up

26. Previous programme

27. Yellow button

28. Blue button

29. No function

30. Subtitle on-off / Subtitle (in Media Browser mode)

NOTE: The Remote Control range is approximately

7m / 23ft.

10

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Getting Started

Attaching the Stand

1. Stand is placed on a at surface (g.1).

2. The product is held over the stand so that it

coincides with the stand mounting point and then it is

left to be mounted with its own weight (g.2).

g.1

g.2

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

11

Getting Started

SIDE AV

5Vdc

Max:500mA

SIDE AV

5Vdc

Max:500mA

SIDE AV

5Vdc

Max:500mA

Connections

Connector Type Cables Device

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

SIDE AV

HEADPHONE

PC to YPbPr

PC/YPbPr

Connection

Connection

Connection

(Audio/Video)

Connection

Headphone

Connection

YPbPr Video

Connection

Connection

Connection

Audio

(side)

HDMI

(back)

SPDIFF

(back)

Side AV

(side)

(side)

(back)

USB

(side)

CI

(side)

Side Audio/Video
Connection Cable
(Supplied)

AV Connection Cable

(supplied)

PC to YPbPr Connection Cable (Not supplied)

PC Audio Cable

(Not supplied)

CAM

module

NOTE: When connecting a device via the YPbPr or Side AV input, you must use a connection cables

to enable connection. See the illustrations above. | To enable PC audio, you will need to use the SIDE AV

CONNECTION cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.| When using the wall mounting kit (optional), we recommend that you plug all
your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module only when the
TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.

12

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Getting Started

First Time Installation - USB Connections

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

To switch on the TV from standby mode either:

Press the “ ” button, P+ / P- or a numeric button on
the remote control.

Press the side function switch until the TV comes on
from standby.

To Switch the TV Off

Press the “ “ button on the remote control or press
the side function switch until the TV switches into
standby mode.

To power down the TV completely, unplug the
power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language
selection screen is displayed. Select the desired

language and press OK.

The First Time Installation (FTI) screen will be
displayed next. Set your preferences using the

navigation buttons and when nished, press OK to

continue.

If Store Mode (optional) is selected, Store mode
option will be available in other settings menu and
your TV’s settings will be optimized for best display

quality. A conrmation screen will be displayed. Select

YES to proceed.

If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
button to continue.

Aerial Installation

If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial

TV broadcasts.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, the Channel

List will be displayed on the screen. If you like how the
channels are sorted according to the LCN (*), please
select “Yes” and than press OK.

Press MENU button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.

IMPORTANT! Back up your les before making

any connections to the TV. Manufacturer will not

be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be
available with NTFS formatted disks.

While formatting a USB hard disk that has 1TB (Tera

Byte) or more le capacity, you can experience problems

with the formatting process. Do not repeatedly quickly
plug and unplug the drive. This may cause physical
damage to the USB player and USB device itself. Do

not pull out USB module while playing a le.

Media Browser Menu

You can play photo, music, and movie les stored

on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the MENU button while in the
Media Browser mode will access the Picture, Sound
and Settings menu options. Pressing the MENU button

again will exit from this screen. You can set your Media
Browser preferences by using the Settings Menu.

Loop/Shufe Mode Operation

Start playback with and

activate

Start playback with OK and

activate

Start playback with OK/ and

activate

TV plays next file and loop
the list.

the same le will be played in a

loop (repeat).

the le will be played in a shufe.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

13

TV Menu Features and Functions

Picture Menu Contents

Mode

Contrast Sets the lightness and darkness values of the screen.

Brightness Sets the brightness value for the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen.

Colour Sets the colour value, adjusting the colors.

Power Save Mode

Backlight
(Optional)

Noise
Reduction

You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Cinema,Game,Sports ,Dynamic and Natural.

To set the Power Save Mode as Eco, Picture Off and Disabled.

(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)

This setting controls the backlight level. The backlight function will be inactive if the Power Save

Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the

picture mode is set to Game.

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting
to reduce the amount of noise.

Advanced Settings

Dyanmic
Contrast

Colour Temp Sets the desired colour tone.

Picture Zoom

Film Mode

Skin Tone

Colour Shift Adjust the desired colour tone.

RGB Gain

Reset Resets the picture settings to factory default settings.(Except Game Mode)

Autoposition
(in PC mode)

H Position (in
PC mode)

V Position (in
PC mode)

Dot Clock (in
PC mode)

Phase (in PC
mode)

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be
added to the Picture Settings while in PC mode.

You can change the Dynamic Contrast ratio to desired value.

Sets the desired picture size from picture zoom menu.

Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching)

Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature on when you are watching films to see the fast
motion scenes clearly.

Skin tone can be changed between -5 and 5.

You can congure the colour temperature values using the RGB Gain feature.

Automatically optimizes the display. Press OK to optimize.

This item shifts the image horizontally to the right hand side or left hand side of the screen.

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Depending on the resolution and scan frequency that you input to the TV set, you may
see a hazy or noisy picture on the screen. In such a case you can use this item to get
a clear picture by trial and error method.

14

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

TV Menu Features and Functions

Sound Menu Contents

Volume Adjusts the volume level.

Equalizer Selects the equalizer mode. Custom settings can be made only when in user mode.

Balance This setting is used for emphasizing left or right speaker balance.

Headphone Sets headphone volume.

Sound Mode You can select a sound mode. (If the selected channel supports).

AVL (Automatic
Volume Limiting)

Dynamic Bass Enables or disables the Dynamic Bass.

Surround Sound

(optional)

Digital Out Sets digital out audio type.

Settings Menu Contents

Conditional Access Controls conditional access modules when available.

Language

Parental

Timers Sets sleep timer to turn off the TV after a certain time. Sets timers for selected programmes.

Date/Time Sets date and time.

Sources Enables or disables selected source options.

Other Settings: Displays other setting options of the TV set:

Menu Timeout Changes timeout duration for menu screens.

Scan Encrypted
Channels

Blue Background Activates or deactivates the blue background system when the signal is weak or absent.

Software Upgrade To ensure that your TV always has the most up to date rmware.

Application Version Displays application version.

Hard of Hearing Enables any special feature sent from the broadcaster.

Audio Description

Auto TV Off

Standby Search
(Optional)

Function sets the sound to obtain xed output level between programmes.

Surround sound mode can be changed as On or Off.

Congures language settings (may change depending on the country selected) Pr e f err e d a nd

cu r r en t set t i ngs will be available. Current settings can be changed only if the broadcaster
supports.

Enter correct password to change parental settings. You can easily adjust menu lock,

maturity lock(may change depending on the country selected) and child lo ck in this menu.

You can also set new pin number.

When this setting is on, the search process will locate the encrypted channels as well.

Audio description refers to an additional narration track for blind and visually impaired viewers of
visual media, including television and movies. You can use this feature, only if the broadcaster

supports that additional narration track.

Note: Audio description sound feature cannot be available in recording or time shifting mode..

You can set the timeout value of auto off feature. When the timeout value is reached and the TV

has not been operated for a selected time, the TV will go into standby mode.

If the Standby Search is set to On, when the TV is in standby mode, available broadcasts will

be searched. If the TV locates any new or missing broadcasts, a menu screen will be displayed,
asking you whether or not to execute these changes. Channel list will be updated and changed
after this process.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

15

TV Menu Features and Functions

Store Mode

If you are displaying the TV in a store, you can activate this mode. Whilst Store

Mode is enabled, some items in the TV menu may not be available.

Power Up Mode This setting confrigures the power up mode preference.

Install and Retune Menu Contents

Automatic Channel
Scan (Retune)

(If available)

Manual Channel Scan This feature can be used for direct broadcast entry.

Analogue Fine Tune

First Time Installation Deletes all stored channels and settings, resets TV to factory settings.

Displays automatic tuning options. Digital Aerial: Searches and stores aerial
DVB stations. Analogue: Searches and stores analogue stations. Digital

Aerial & Analogue: Searches and stores aerial DVB and analogue stations.

You can use this setting for ne tuning analogue channels. This feature is not

available if no analogue channels are stored.

16

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel List
options.

Conguring Parental Settings

To prohibit viewing of certain programmes, channels and
menus can be locked by using the parental control system.

To display parental lock menu options, the PIN number
should be entered. The factory default PIN number is

0000. After coding the correct PIN number, parental

settings menu will be displayed.

Menu Lock: Menu lock setting enables or disables

the menu access.

Maturity Lock (optional): When set, this option

gets the maturity information from the broadcast and
if this maturity level is disabled, disables access to
the broadcast.

Child Lock: When Child Lock is set, the TV can only

be controlled by the remote control. In this case the
control panel buttons will not work.

Set PIN: Denes a new PIN number.

Note: If the Country option is set to France, you can use 4725
as the default code.

Electronic Programme Guide (EPG)

Some, but not all channels send information about

the current and next programmes. Press the “ ”
button to view the EPG menu.

Red button (Prev Day): Displays the programmes
of previous day.

Green button (Next day): Displays the programmes
of the next day.

Yellow button (Zoom): Expands programme

information.

Blue button (Filter): Views ltering options.

Software Upgrade

Your TV is capable of nding and updating automatically
via the Aerial signal.

Software upgrade search via user interface

Simply navigate on your main menu. Choose Settings
and select Other Settings menu. In Other Settings
menu navigate on to the Software for Upgrade item and
press OK button to check for a new software upgrade.
Note : Internet connection is needed. If an internet
connection is not available, try to upgrade via
broadcast. If a new upgrade is found, it starts to
download the upgrade. Press OK to continue with
the reboot operation.

Background search and upgrade mode

• While TV is connected to Internet, in background

it searches for critical software upgrades. If a critical
software upgrade is found it downloads the upgrade
silently. When download completes with success a
message is displayed for reboot operation to activate

new software. Press OK to continue with the reboot

operation.

3 AM search and upgrade mode

While the TV is connected to an aerial signal. If

Automatic scanning in the Upgrade Options menu
is enabled, the TV wakes up at 03:00 and searches

broadcast channels for new software upgrades. If
new software is found and downloaded successfully,
the next time the TV powers up , it will have the new
software version.

Note: If the TV fails to come on after the upgrade unplug the
TV for 2 minutes and plug in again.

SUBTTL: Press “ ” button to view Select Genre
menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.

INFO(İ): Displays, in detailed, information on the
programme selected.

Numeric buttons (Jump): Jumps to the preferred

channel directly via numeric buttons.

OK: Displays programme options.

Text (Search): Displays “Guide Search” menu.

(Now) : Shows the current programme.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

17

General TV Operation

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to
wall outlet. The batteries in the remote control may be
exhausted. Press the Power button on the TV.

Poor picture

• Have you selected the correct TV system?

• Low signal level can cause picture distortion.Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

• The picture quality may degrade when two devices

are connected to the TV at the same time. In such
a case, disconnect one of the devices.

No picture

• No Picture means that your TV is not receiving a

transmission. Have you selected the correct button on

the remote control? Try once more. Also make sure

the correct input source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Has the TV been set to mute? To cancel mute, press the

“ ” button, or increase the volume level.

• Sound is coming from only one speaker. Is the balance

set to one extreme? See Sound Menu section.

Remote control - does not operate

• The batteries may be exhausted. Replace the

bateries.

Input sources - can not be selected

• If you cannot select an input source, it is possible that

no device is connected. if not

• Check the AV cables and connections if you have tried

to connect a device.

Quick Menu

Quick Settings menu allows you to access some options
quickly. This menu includes Power Save Mode, Picture

Mode, Equalizer Settings, Favourites and Sleep
Timer options. Press Q.MENU button on the remote

control to view quick menu. See the following chapters
for the details of the listed features.

Teletext

Press “ ” button to enter. Press again to activate mix
mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.

Digital Teletext (for UK only)

Press “ ” button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons

and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the “ ” button is pressed again, the TV returns
to television broadcast.

18

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Source

Supported Signals

Available

Other Information

Media

File Extension
Format

Remarks

Video

Audio

(Maximum resolution/Bit rate etc.)

PC Input Typical Display Modes

The following table is an illustration of some of the typical video
display modes. Your TV may not support all resolutions. Your TV

supports up to 1920x1080.

Index Resolution Frequency

1 640x350p 60 Hz

2 640x400p 60 Hz

3 1024x768 60 Hz

4 1280x768 60 Hz

5 1360x768 60 Hz

6 720x400 60 Hz

7 800x600 56 Hz

8 800x600 60 Hz

9 1024x768 60 Hz

10 1024x768 66 Hz

11 1280x768 60 Hz

12 1360x768 60 Hz

13 1280x1024 60 Hz

14 1280x960 60 Hz

15 1280x1024 60 Hz

16 1400x1050 60 Hz

17 1600x1200 60 Hz

18 1920x1080 60 Hz

Supported File Formats for USB Mode

AV and HDMI Signal Compatibility

PAL 50/60 O

EXT

(SCART)

Side AV

PC/
YPbPr

HDMI1
HDMI2

(X: Not Available, O: Available)

In some cases a signal on the LED TV may not be displayed
properly. The problem may be an inconsistency with standards
from the source equipment (DVD, Set-top box, etc. ). If you do
experience such a problem please contact your dealer and also
the manufacturer of the source equipment.

NTSC 60 O

RGB 50 O

RGB 60 O

PAL 50/60 O

NTSC 60 O

480I, 480P 60Hz O

576I, 576P 50Hz O

720P 50Hz,60Hz O

1080I 50Hz,60Hz O

1080P 50Hz,60Hz O

480I 60Hz O

480P 60Hz O

576I, 576P 50Hz O

720P 50Hz,60Hz O

1080I 50Hz,60Hz O

24Hz, 25Hz

1080P

30Hz, 50Hz,
60Hz

O

.mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3

.dat MPEG1, 2

.vob MPEG2

.mkv H.264, MPEG1,2,4 EAC3 / AC3

MPEG4, Xvid 1.00,

Movie

.mp4

.avi

Music .mp3 -

.jpg .jpeg

Photo

.bmp - max WxH = 9600x6400 3840000bytes

.sub

Subtitle

.srt

Xvid 1.01, Xvid 1.02, Xvid

1.03, Xvid 1.10-beta1/2

H.264

MPEG2, MPEG4 PCM/MP3

Xvid 1.00, Xvid 1.01, Xvid

1.02, Xvid 1.03, Xvid

1.10-beta1/2 H.264

Baseline JPEG max WxH = 15360x8640 4147200bytes

Progressive JPEG max WxH = 1024x768 6291456bytes

- -

MPEG2

PCM/MP3

PCM

MPEG 1 Layer 1 /
2 (MP3)

MAX 1920x1080 @ 30P 20Mbit/sec

MAX 1920x1080 @ 30P 20Mbit/sec

32Kbps ~ 320Kbps(Bit rate)

32KHz ~ 48KHz(Sampling rate)

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

19

Other Information

Plug replacement - UK and Ireland only

Should you need to replace the plug; the wires in

the power cable are coloured in the following way:

Blue – Neutral ‘N’

Brown – Live ‘L’

Green & Yellow – Earth ‘E’
As the colours of the wires in the power cable

may not correspond with the coloured markings
identifying the terminals in your plug, and proceed

as follows:
The green & yellow wire must be connected to the

terminal in the plug that is marked with the letter E
or by the earth symbol.

The blue wire must be connected to the terminal
that is marked with the letter N.

The brown wire must be connected to the terminal
that is marked with the letter L.

If the power lead is damaged, it must be replaced

by a qualied electrician.

Connect
blue lead
to ‘N’ ­Neutral

Connect green/yellow
lead to ‘E’ or - Earth

E

L

5A Fuse

N

Connect
brown lead
to ‘L’ - Live

20

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

Other Information

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

• Simple help and advice on setting up your digital

equipment (image).

• Guidance on connecting other devices to your

television such as a DVD player, Sky, home cinema
system or a games console.

• Order spare parts, including that lost remote

control.

• Any other technical issues you may need

assistance with.

Call us today: 0845 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential

lines depending on your call plan/tariff. Mobile and other providers costs may vary,
see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

21

Guarantee

This product is guaranteed for twelve months from the date of original purchase.

Any defect that arises due to faulty materials or workmanship will either be replaced,

refunded or repaired free of charge where possible during this period by the dealer
from whom you purchased the unit.

Product Guarantee

This product is guaranteed against manufacturing defects for a period of

Year

The guarantee is subject to the following provisions:

• The guarantee does not cover accidental damage, misuse, cabinet parts, knobs

or consumable items.

• The product must be correctly installed and operated in accordance with the

instructions contained in this manual.

• It must be used solely for domestic purpose.

• The guarantee will be rendered invalided if the product is re-sold or has been

damaged by inexpert repair.

• Specifications are subject to change without notice.

• The manufacturer disclaims any liability for the incidental or consequential damages.

• The guarantee is in addition to, and does not diminish your statutory or legal rights.

• In the event of a problem with the product with in the guarantee period call the

Customer Helpline: 0845 604 0105.

Guarantor: Argos Ltd

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

22

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

A

Product Fiche

B

C

D

E

F

(diagonal, approx.) (inch/cm)

G

Annual energy consumption

H

Standby power consumption

I

Off mode power consumption

J

K

Product No. 10084918

Model No. DLED40127FHDS

Energy efciency class A

Visible screen size

On mode average power

consumption (Watt)

(kWh/annum)

(Watt)

(Watt)

Display resolution (px) 1920 x 1080

Commercial Brand: BUSH

40 inches 102 cm

63

91

0,5

0

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105

23

Home Retail Group

489-499 Avebury Boulevard

Saxon Gate West

Central Milton Keynes

MK9 2NW

For any help concerning set up and use of your TV please call the Customer Helpline: 0044 845 604 0105