Bush DLED32165HD Instruction manual

32” LED TV

APPROVED

Installation & Operating Instructions - Please keep for future reference

138/4828

DLED32165HD

IMPORTANT - Please read these instructions fully before installing or operating

These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.

For any help concerning set up and use of your TV please call the

Customer Helpline:

Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

0345 604 0105

Issue 1 - 9/2/11

Contents

Safety Information 3
Preparation 3
Intended Use 3
Power source 3
Positioning the TV 3
Power cord and plug 3
Moisture and Water 4
Ventilation 4
Heat sources and Flames 4
Headphone Volume 4
Wall Mounting (optional) 4
Cleaning 4
Batteries 4
Replacement Parts 5
Servicing 5
Taking out of service and storing 5
Symbols in this Instruction Book 5
Support 6

Notications & Features & Accessories 7
Environmental Information 7
Standby Notications 7
Features 7
Accessories Included 7
TV Control Switch & Operation 8

Inserting the Batteries into the Remote 8
Connect Power 8

Antenna Connection 8
Notication 9
Specication 9

Remote Control 10

Digital Teletext 10

Attaching the Stand 11

Connections 12
First Time Installation - USB Connections 13

Switching On/Off 13

To Switch the TV On 13
To Switch the TV Off 13

Media Playback via USB Input 14
Media Browser Menu 14
Quick Menu 14
TV Menu Features and Functions 15

Sound Menu Contents 16

Other Settings: Displays other setting options of the
TV set: 16

General TV Operation 17
Using the Channel List 17
Conguring Parental Settings 17
Electronic Programme Guide (EPG) 17

Software Upgrade 18

Troubleshooting & Tips 18

Tv will not turn on 18
Poor picture 18
No picture 18
No sound 18
Remote control - does not operate 18

Input sources - can not be selected 18
To Program Your SKY Remote For Your TV 18
PC Input Typical Display Modes 19
Supported File Formats for USB Mode 19

AV and HDMI Signal Compatibility 19
Other Information 20

Plug replacement - UK and Ireland only 20

The Argos Technical Helpline is here to help 21

Guarantee 22

Model number

BUSH DVB-T DLED32165HD

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 2 -

Safety Information

If there is lightning or storms, or if the TV is not

going to be used for a while (e.g. if going away

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

To operate your TV in extreme ambient conditions
may cause the damage of the device.

NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note : Follow the on screen instructions for operating the
related features.

on holiday), disconnect the TV set from the
mains. The mains plug is used to disconnect TV
set from the mains and therefore it must remain
readily operable.

The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

IMPORTANT - Please read these instructions fully before installing or operating

Preparation

Place the device on a solid even surface. For
ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, do not place any objects on top of the set.
Use this device in moderate climates.

Operation temperature and operation humidity:
0ºC up to 40ºC, 85% rel. humidity max. (not blocking
ventilation openings).

Intended Use

This device is used to receive and display TV
programmmes.The different connection options make
an additional expansion of the reception and display
sources possible (various external devices). This device
is only suitable for dry interior use. This appliance is
intended solely for private domestic use and may not
be used for industrial and commercial purposes. We
exclude liability in principle, if the device is not used

as intended, or unauthorized modications have been

made. To operate your LED TV in extreme ambient
conditions may cause the damage of the device.

WARNING: Never let people (including

children) with physical, sensory or mental
abilities or lack of experience and / or knowledge
unsupervised use electrical device!

Children may not recognize dangers right! The
swallowing of batteries can be fatal. Keep batteries
always out of reach of small children. If a battery
is swallowed, seek immediate medical attention.

Keep the packaging lms out of reach of children,

there is a risk of suffocation.

Power source

• The TV should be operated only from a 220-240V
AC, 50 Hz outlet.

• Warning: Do not leave your TV in standby or

operating mode when you leave your house.

Positioning the TV

• For ventilation, please leave a clear space of at least
10cm all around the TV.

• Do not block the ventilation openings.

• Do not place the TV on sloping or unstable surfaces,

the TV may tip over.

• To prevent damage to the TV, do not place any
objects on top of the TV.

• Only use the TV in moderate climates.

Power cord and plug

• The power cord plug should be easily accessible.
In case of storms and lightning, when going on
holiday, or when the TV is not used for a long period
of time disconnect the power cord from the mains
power socket.

• The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
accessible.

• Do not place the TV, furniture, etc. on the power
cord or pinch the cord.

• Handle the power cord by the plug, do not unplug
the TV by pulling the power cord.

• Never touch the power cord/plug with wet hands
as this could cause a short circuit or electric shock.

• Never make a knot in the power cord or tie it with
other cords.

• Power cords should be placed in such a way that
they are not likely to be stepped on or driven over.

• A damaged power cord/plug can cause re or give

you an electric shock. When damaged it must be

replaced, this should only be done by qualied

personnel.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 3 -

Safety Information

Moisture and Water

• Do not use this TV in a humid or damp place (avoid
bathrooms, the sink in the kitchen, etc.

• Do not expose this TV to rain or water, as this may
be dangerous.

• Do not place objects lled with liquids, such as
ower vases, on top of the TV. Avoid from dripping

or splashing.

• If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualied

personnel before operating it any further.

Ventilation

• The slots and openings on the TV set are intended
for ventilation and to ensure reliable operation.

• To prevent overheating, these openings must not
be blocked or covered in anyway.

Heat sources and Flames

• Do not expose the TV to direct sunlight
or other heat sources.

• The TV should not be placed near to
open ames and sources of intense

heat such as an electric heater.

• Ensure that no open ame sources, such as lighted

candles, are placed on top of the TV.

Headphone Volume

• Excessive sound pressure from earphones
and headphones can cause hearing loss,
please take care.

Wall Mounting (optional)

• To prevent injury, this TV must be securely attached
to the wall in accordance with the installation
instructions (if the option is available).

Cleaning

• Before cleaning, unplug the TV from the wall socket.

• Do not use liquid or aerosol cleaners. Only use a

soft, dry cloth.

Batteries

• Warning: Incorrect installation of
batteries may cause battery leakage
and corrosion, resulting in damage to
the remote control.

• Do not mix old and new batteries, or
batteries of different types.

• Do not dispose of batteries in a re.

• Do not dispose of batteries with normal household

waste, take to a local recycling centre.

CAUTION: Insert the batteries / rechargeable
batteries in the correct polarity. Don´t try to
recharge non rechargeable batteries and under

no circumstances throw them into re. Danger of

explosion. Do not use unequal batteries (old and

new, Alkaline and carbon, etc.) simultaneously. If

you will not use the device for a long time, remove
the batteries and store the device in a dry and dust
free place. Improper use of batteries may cause an
explosion or leakage. If the batteries have leaked, use
gloves and clean the appliance thoroughly with a dry
cloth! Batteries should not be exposed to heat, such

as sunshine, re or the like.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 4 -

Safety Information

Replacement Parts

When replacement parts are required, make sure that
the service technician has used replacement parts,

which are specied by the manufacturer or have the
same specications as the original one. Unauthorised
substitutions may result in re, electrical shock or

other hazards.

Servicing

• Warning: Risk of electric shock, do not attempt
to repair, service or modify this TV yourself. Contact
the manufacturer, their approved service agent or
the Customer Helpline: 0345 604 0105 .

Taking out of service and storing

Unplug the TV from the mains and pack the TV in
an appropriate cardboard box. Remove the batteries
from the remote control and pack the remote control
to the TV set.

NOTE: The TV set should be stored in a dry and dust-

free room.

Symbols in this Instruction Book

The following symbols are used in the Instruction
Book as a marker for restrictions and precautions
and safety instructions. Note such information for
security reasons.

WARNING

If you do not pay attention to such a marked warning,
it can cause serious injury or death. Note these
warnings strictly, in order to ensure a safe operation.

CAUTION

Such a precaution is marked, you should take up or
note, to avoid injury or property damage. Note these
instructions strictly, in order to ensure a safe operation.

IMPORTANT

Warnings on the appliance and restrictions are
displayed like this. Read this information strictly
in order to operate the system correctly and avoid
damage.

NOTE: Information about the operation and
additional explanations are marked like this. To be
aware of such information is recommended to ensure
that the functions can be used optimally.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 5 -

Support

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

• Simple help and advice on setting up your digital

equipment (image).

• Guidance on connecting other devices to your

television such as a DVD player, Sky, home cinema
system or a games console.

• Order spare parts, including that lost remote

control.

• Any other technical issues you may need

assistance with.

Call us today: 0345 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential

lines depending on your call plan/tariff. Mobile and other providers costs may vary,
see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 6 -

Getting Started

Getting Started

Notications & Features & Accessories

Environmental Information

This television is designed to consume less energy
to help save the environment. To reduce energy

consumption, you should take the following steps:

If you set the Power Save Mode as Eco, the TV will
switch to energy-saving mode. The Power Save Mode
settings can be found In the ‘Picture’ section of the
Main Menu. Note that some picture settings will be
unavailable to be changed.

If Picture Off is selected, “Screen will be off in
3 seconds.” message will be displayed. Select
PROCEED and press OK to continue. The screen

will be off immediately.

When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.

Standby Notications

1. If the TV does not receive any input signal (e.g.
from an aerial or HDMI source) for 5 minutes, the
TV will go into standby. When you next switch-

on, the following message will be displayed:

“Standby Cause No Signal” Press OK to
continue.

2. If the TV has been left on and not been operated
for a while, the TV will go into standby. When
you next switch-on, the following message will
be displayed. “Standby Cause No Operation”
Press OK to continue.

Features

• Remote controlled colour TV.

• Fully integrated digital TV (DVB-T)

• HDMI inputs are for connecting a device that has

a HDMI socket.

• USB input.

• OSD menu system.

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system.

• Teletext.

• Headphone connection.

• Automatic programming system.

• Manual tuning.

• Automatic power down after up to six hours.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7.

• Game Mode (Optional).

Accessories Included

• Remote Control

• Batteries: 2 x AAA

• Instruction Book

• Quick Start Guide

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 7 -

Getting Started

TV Control Switch & Operation

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection

switch

The Control button allows you to control the Volume/

Programme/ Source and Standby-On functions of

the TV.

To change volume: Increase the volume by pushing

the button up. Decrease the volume by pushing the
button down.

To change channel: Press the middle of the button,

the channel information banner will appear on screen.
Scroll through the stored channels by pushing the
button up or down

To change source: Press the middle of the button

twice, the source list will appear on screen. Scroll
through the available sources by pushing the button
up or down.

To turn the TV off: Press the middle of the button down

and hold it down for a few seconds, the TV will turn
into standby mode.

Inserting the Batteries into the Remote

Lift the cover on the back of the remote upward gently.
Install two AAA batteries. Make sure to match the +
and - ends of the batteries in the battery compartment
(observe the correct polarity) Replace the cover.

Connect Power

IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow

the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.

Antenna Connection

Connect the “aerial” plug to the AERIAL INPUT (ANT)

socket located on the back of the TV.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 8 -

Getting Started

Notication

“HDMI, the HDMI logo and High-Denition Multimedia

Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”

SRS TruSurround HD is a trademark of SRS Labs,
Inc. TruSurround technology is incorporated under
license from SRS Labs, Inc.

Information for Users on Disposal of Old
Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the product
or battery, please consider the collection systems or
facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates

that this battery contains lead.

Specication

TV Broadcasting PAL B/G D/K K I/I’

Receiving Channels

Number of Preset
Channels

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio SRS Trusurround HD

Audio Output Power
(WRMS.) (10% THD)

Power Consumption 65 W

TV Dimensions DxLxH
(with foot)

TV Dimensions DxLxH
(without foot)

Operation
temperature and
operation humidity:

VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND

1000

2 x 6

185 x 735 x 478

36/68 x 735 x 438

0ºC up to 40ºC, 85%
humidity max

VESA 200 x 100 mm / M4

Display

16:9 display, 81 cm / 32”

Screen Size

Battery

Products

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 9 -

Getting Started

4

7

8

9

P+

P-V+V-

1

.,/@

2

3

5

6

0

OK

Q.MENU

EXIT

BACK

LANG.

SOURCE

2

/1/

Remote Control

Digital Teletext

Press button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons

and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the button is pressed again, the TV returns to
television broadcast.

1. Standby

2. Play

3. No function

4. Current language select

5. Rapid reverse

6. Colored buttons

7. Numeric buttons

8. Channel list

9. Navigation buttons

10. OK /Select

11. Menu on / off

12. Back button / Index page (in TXT mode)

13. No function

14. Media browser

15. Electronic Programme Guide

16. Teletext

17. Volume up / down

18. Mute button

19. Programme up / down

20. Screen mod

21. Info / Reveal (in TXT mode)

22. My button 1

23. My button 2

24. Exit

25. Q. Menu

26. Channel swap

27. Rapid advance

28. Subtitle on / off

29. Stop

30. Pause

31. AV / Source

Using My button 1

Press MY BUTTON 1 for ve seconds when on a
desired source, channel or link, until the “MY BUTTON

IS SET” message is displayed on the screen. This

confirms that the selected MY BUTTON is now

associated with the selected function.

Using My button 2

Press MY BUTTON 2 for ve seconds when on a
desired source, channel or link, until the “MY BUTTON

IS SET” message is displayed on the screen. This

confirms that the selected MY BUTTON is now

associated with the selected function.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 10 -

Getting Started

Attaching the Stand

1. Stand is placed on a at surface (g.1).

2. The product is held over the stand so that it

coincides with the stand mounting point and then it is

left to be mounted with its own weight (g.2).

g.1

g.2

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 11 -

Getting Started

Connections

Connector Type Cables Device

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

SIDE AV

HEADPHONE

PC to YPbPr

PC/YPbPr

Connection

Connection

Connection

Connection

Headphone

Connection

YPbPr Video

Connection

Connection

Connection

Audio

(side)

HDMI

(back)

SPDIF

(back)

Side AV

(side)

(side)

(back)

USB

(side)

CI

(side)

PC Audio Cable

(Not supplied)

AV Cable

(Not supplied)

PC to YPbPr Connection Cable

(Not supplied)

CAM

module

NOTE: When connecting a device via the YPbPr or Side AV input, you must use the supplied connection

cables to enable connection. See the illustrations above. | To enable PC audio, you will need to use the SIDE

AV CONNECTION cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the
TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser
mode, output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend
that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module
only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 12 -

Getting Started

First Time Installation - USB Connections

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

To switch on the TV from standby mode either:

Press the “ ” button, P+ / P- or a numeric button on
the remote control.

Press the side function switch until the TV comes on
from standby.

To Switch the TV Off

Press the “ “ button on the remote control or press
the side function switch until the TV switches into
standby mode.

To power down the TV completely, unplug the
power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language
selection screen is displayed. Select the desired

language and press OK.

You can activate Store mode (optional) option to

be available in “Other settings” menu and your TV’s

features will be illustrated on the top of the screen.
A conrmation screen will be displayed. Select YES
to proceed.

If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
button to continue.

The First Time Installation (FTI) screen will be
displayed next. Set your preferences using the

Select Yes, and the television will search for digital
terrestrial TV broadcasts.

navigation buttons and when nished, press OK to

continue.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 13 -

Getting Started

NOTE: You can press MENU button to cancel.

After all the available stations are stored, the Channel
List will be displayed on the screen. If you are satised

with the order of channels press the OK button to quit
the channel list and watch TV.

Note:

Default PIN code can change depending on the
selected country.

If you are asked to enter a PIN code for viewing a
menu option, use one of the following codes: 4725,
0000 or 1234.

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.

IMPORTANT! Back up your files before making
any connections to the TV. Manufacturer will not be

responsible for any le damage or data loss. Certain

types of USB devices (e.g. MP3 Players) or USB hard
disk drives/memory sticks may not be compatible
with this TV.

While formatting a USB hard disk that has 1TB (Tera
Byte) or more file capacity, you can experience
problems with the formatting process. Do not
repeatedly quickly plug and unplug the drive. This
may cause physical damage to the USB player and
USB device itself. Do not pull out USB module while

playing a le.

Media Browser Menu

You can play photo, music, and movie les stored on a

USB disk by connecting it to your TV. Connect a USB
disk to one of the USB inputs located on the side of
the TV. Pressing the MENU button while in the Media
Browser mode will access the Picture, Sound and
Settings menu options. Pressing the MENU button

again will exit from this screen. You can set your Media
Browser preferences by using the Settings Menu.

Loop/Shufe Mode Operation

Start playback with and

activate

Start playback with OK and

activate

Start playback with OK/ and

activate

TV plays next file and loop
the list.

the same le will be played in a

loop (repeat).

the le will be played in a shufe.

Quick Menu

Quick Settings menu allows you to access some
options quickly. This menu includes Power Save
Mode, Picture Mode, Equalizer Settings, Favourites
and Sleep Timer options. Press Q.MENU button
on the remote control to view quick menu. See
the following chapters for the details of the listed
features.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 14 -

TV Menu Features and Functions

Picture Menu Contents

PC mode)

Mode

Contrast Sets the lightness and darkness values of the screen.

Brightness Sets the brightness value for the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen.

Colour Sets the colour value, adjusting the colors.

Power Save Mode

Backlight
(Optional)

Noise Reduction

You can change the picture mode to suit your preference or requirements. Picture mode

can be set to one of these options: Cinema, Game, Dynamic and Natural.

To set the Power Save Mode as Eco, Picture Off and Disabled.

(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)

This setting controls the backlight level. The backlight function will be inactive if the

Power Save Mode is set to Eco. The backlight cannot be activated in VGA, Media

Browser mode or while the picture mode is set to Game.

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction
setting to reduce the amount of noise.

Advanced Settings

Dynamic Contrast You can change the Dynamic Contrast ratio to desired value.

Colour Temp Sets the desired colour tone.

Sets the desired picture size from picture zoom menu.

Picture Zoom

HDMI True Black

Film Mode

Skin Tone Skin tone can be changed between -5 and 5.

Colour Shift Adjust the desired colour tone.

RGB Gain You can congure the colour temperature values using the RGB Gain feature.

Reset Resets the picture settings to factory default settings.(Except Game Mode)

Autoposition (in

Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage
switching)

While watching from HDMI source, this feature will be visible in the Picture Settings
menu. You can use this feature to enhance blackness in the picture.

Films are recorded at a different number of frames per second to normal television

programmes. Turn this feature on when you are watching lms to see the fast motion

scenes clearly.

Automatically optimizes the display. Press OK to optimize.

H Position (in PC
mode)

V Position (in PC
mode)

Dot Clock (in PC
mode)

Phase (in PC
mode)

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be
added to the Picture Settings while in PC mode.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

This item shifts the image horizontally to the right hand side or left hand side of the
screen.

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Depending on the resolution and scan frequency that you input to the TV set, you may
see a hazy or noisy picture on the screen. In such a case you can use this item to get a
clear picture by trial and error method.

English - 15 -

TV Menu Features and Functions

Sound Menu Contents

Headphone

Settings Menu Contents

Date/Time

Volume

Equalizer

Balance

Sound Mode

AVL (Automatic
Volume Limiting)

SRS TruSurround HD

Digital Out

Conditional Access

Language

Parental

Timers

Sources

Adjusts the volume level.

Selects the equalizer mode. Custom settings can be made only when in user mode.

This setting is used for emphasizing left or right speaker balance.

Sets headphone volume.

You can select a sound mode. (If the selected channel supports).

Function sets the sound to obtain xed output level between programmes.

Enables or disables the SRS TruSurround HD. When activated, some features in

the Sound menu can not be altered.

Sets digital out audio type.

Controls conditional access modules when available.

Congures language settings (may change depending on the country selected)

Preferred and current settings will be available. Current settings can be changed
only if the broadcaster supports.

Enter correct password to change parental settings. You can easily adjust menu
lock in this menu. You can also set new pin number.

Sets sleep timer to turn off the TV after a certain time. Sets timers for selected
programmes.

Sets date and time.

Enables or disables selected source options.

Other Settings: Displays other setting options of the TV set:

Menu Timeout

Scan Encrypted
Channels

Blue Background

Software Upgrade

Application Version

Hard of Hearing

Audio Description

Auto TV Off

Standby Search
(Optional)

Changes timeout duration for menu screens.

When this setting is on, the search process will locate the encrypted channels as
well.

Activates or deactivates the blue background system when the signal is weak or

absent.

To ensure that your TV always has the most up to date rmware.

Displays application version.

Enables any special feature sent from the broadcaster.

Audio description refers to an additional narration track for blind and visually

impaired viewers of visual media, including television and movies. You can use this
feature, only if the broadcaster supports that additional narration track.

Note: Audio description sound feature cannot be available in recording or time shifting mode.

You can set the timeout value of auto off feature. When the timeout value is
reached and the TV has not been operated for a selected time, the TV will go into
standby mode.

If the Standby Search is set to On, when the TV is in standby mode, available

broadcasts will be searched. If the TV locates any new or missing broadcasts,
a menu screen will be displayed, asking you whether or not to execute these
changes. Channel list will be updated and changed after this process.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 16 -

TV Menu Features and Functions

Power Up Mode

Install and Retune Menu Contents

First Time Installation

Store Mode (Optional)

Automatic Channel
Scan (Retune)

(If available)

Manual Channel Scan

Network Channel
Scan (optional)

Analogue Fine Tune

If you are displaying the TV in a store, you can activate this mode. Whilst Store

Mode is enabled, some items in the TV menu may not be available.

This setting congures the power up mode preference.

Displays automatic tuning options. Digital Aerial: Searches and stores aerial
DVB stations. Analogue: Searches and stores analogue stations. Digital Aerial &
Analogue: Searches and stores aerial DVB and analogue stations.

This feature can be used for direct broadcast entry.

Searches for the linked channels in the broadcast system.

You can use this setting for ne tuning analogue channels. This feature is not

available if no analogue channels are stored.

Deletes all stored channels and settings, resets TV to factory settings.

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active
stations to be listed by using the Channel List options.

Conguring Parental Settings

To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.

To display parental lock menu options, the PIN number should be entered. The factory default PIN number is

0000. After coding the correct PIN number, parental settings menu will be displayed.

Menu Lock: Menu lock setting enables or disables the menu access.

Child Lock (Optional): When Child Lock is set, the TV can only be controlled by the remote control. In this

case the control panel buttons will not work.

Set PIN: Denes a new PIN number.

Electronic Programme Guide (EPG)

Some, but not all channels send information about the current and next programmes. Press the button
to view the EPG menu.

Red button (Prev Day): Displays the programmes of previous day.

Green button (Next day): Displays the programmes of the next day.

Yellow button (Zoom): Expands programme information.

Blue button (Filter): Views ltering options.

SUBTTL: Press button to view Select Genre menu. Using this feature, you can search the programme

guide database in accordance with the genre. Info available in the programme guide will be searched and
results matching your criteria will be listed.

INFO(i): Displays, in detailed, information on the programme selected.

Numeric buttons (Jump): Jumps to the preferred channel directly via numeric buttons.

OK: Displays programme options.

Text (Search): Displays “Guide Search” menu.

(Now) : Shows the current programme.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 17 -

Software Upgrade

Your TV is capable of nding and updating automatically
via the Aerial signal or over the Internet.

Software upgrade search via user interface

Simply navigate on your main menu. Choose Settings
and select Other Settings menu. In Other Settings
menu navigate on to the Software for Upgrade item
and press OK button to check for a new software
upgrade.

Note : Internet connection is needed. If an Internet connection
is not available, try to upgrade via broadcast. If a n ew
upgrade is found, it starts to download the upgrade.
Press OK to continue with the reboot operation.

3 AM search and upgrade mode

While the TV is connected to an aerial signal. If

Automatic scanning in the Upgrade Options menu
is enabled, the TV wakes up at 03:00 and searches

broadcast channels for new software upgrades. If
new software is found and downloaded successfully,
the next time the TV powers up , it will have the new
software version.

Note: If the TV fails to come on after the upgrade unplug the
TV for 2 minutes and plug in again.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to
wall outlet. The batteries in the remote control may
be exhausted. Press the Power button on the TV.

Poor picture

• Have you selected the correct TV system?

• Low signal level can cause picture distortion. Please

check antenna access.

• Check if you have entered the correct channel
frequency if you have done manual tuning.

• The picture quality may degrade when two devices
are connected to the TV at the same time. In such
a case, disconnect one of the devices.

No picture

• No Picture means that your TV is not receiving a
transmission. Have you selected the correct button

on the remote control? Try once more. Also make

sure the correct input source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Has the TV been set to mute? To cancel mute, press
the “ ” button, or increase the volume level.

• Sound is coming from only one speaker. Is the
balance set to one extreme? See Sound Menu
section.

Remote control - does not operate

• The batteries may be exhausted. Replace the
batteries.

Input sources - can not be selected

• If you cannot select an input source, it is possible
that no device is connected. if not

• Check the AV cables and connections if you have

tried to connect a device.

To Program Your SKY Remote For Your TV

1. Make sure your SKY box is connected to your TV

2. Turn your TV and SKY box on

3. Press TV on your SKY remote control handset

4. Hold down SELECT and the RED button together

for about two seconds, until the red light on the
SKY remote blinks twice.

5. Key in 0065 on your SKY remote. The light on the

SKY remote should blink twice

6. Press the STANDBY button on your SKY remote

control. Your TV should now switch off.

7. Press SELECT again. The light on your SKY

remote control should now blink twice

You should now be able to control some basic
functions on your TV from your SKY remote control
(e.g. volume up/down, programme up/down).

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 18 -

Source

Supported Signals

Available

PC Input Typical Display Modes

Format

Remarks

Video

Audio

(Maximum resolution/Bit rate etc.)

MPEG1: 768x576 @30P

MPEG2:1920x1080 @ 30P

H.264/VP6:1920x1080 @ 30P

Sorenson: 352x288 @30P

MPEG 1 Layer 1 /

32Kbps ~ 320Kbps(Bit rate)

Hz,8K, 11.025K, 12K Hz(Sampling rate)

.jpg .jpeg

Baseline JPEG

-

max WxH = 17000x10000 4147200bytes

.

Progressive JPEG

-

max WxH = 4000x4000 3840000bytes

Subtitle

.sub .srt--

-

The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions. Your TV supports up to 1920x1080.

Index Resolution Frequency

1 800x600 56 Hz

2 800x600 60 Hz

3 1024x768 60 Hz

4 1024x768 66 Hz

5 1280x768 60 Hz

6 1360x768 60 Hz

7 1280x960 60 Hz

8 1280x1024 60 Hz

9 1400x1050 60 Hz

10 1600x1200 60 Hz

11 1920x1080 60 Hz

AV and HDMI Signal Compatibility

PAL 50/60 O

EXT

(SCART)

NTSC 60 O

RGB 50 O

RGB 60 O

Side AV

PAL 50/60 O

NTSC 60 O

480I, 480P 60Hz O

576I, 576P 50Hz O

PC/
YPbPr

720P 50Hz,60Hz O

1080I 50Hz,60Hz O

1080P 50Hz,60Hz O

480I 60Hz O

480P 60Hz O

576I, 576P 50Hz O

HDMI1

HDMI2

720P 50Hz,60Hz O

1080I 50Hz,60Hz O

24Hz, 25Hz

1080P

30Hz, 50Hz,

O

60Hz

(X: Not Available, O: Available)

In some cases a signal on the LED TV may not be displayed
properly. The problem may be an inconsistency with standards
from the source equipment (DVD, Set-top box, etc. ). If you
do experience such a problem please contact your dealer and
also the manufacturer of the source equipment.

Supported File Formats for USB Mode

Media File Extension

mpg, mpeg MPEG1, MPEG2

vob MPEG2

mp4 MPEG4, Xvid , H.264

Movie

Music

Photo

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

mkv H.264, MPEG4,VC-1

avi MPEG2, MPEG4, Xvid , H.264

v H.264/VP6/Sorenson

3gp MPEG4 , H.264 1920x1080 @ 30P

.mp3 -

.bmp - - max WxH = 5760x4096 3840000bytes

English - 19 -

2 (MP3)

1920x1080 @ 30P

32K, 44.1k, 48k Hz,16K, 22.05K, 24K

Other Information

Plug replacement - UK and Ireland only

Should you need to replace the plug; the wires in

the power cable are coloured in the following way:

Blue – Neutral ‘N’

Brown – Live ‘L’

Green & Yellow – Earth ‘E’

As the colours of the wires in the power cable

may not correspond with the coloured markings
identifying the terminals in your plug, and proceed

as follows:

The green & yellow wire must be connected to the

terminal in the plug that is marked with the letter E
or by the earth symbol.

The blue wire must be connected to the terminal
that is marked with the letter N.

The brown wire must be connected to the terminal
that is marked with the letter L.

If the power lead is damaged, it must be replaced

by a qualied electrician.

Connect
blue lead
to ‘N’ ­Neutral

Connect green/yellow
lead to ‘E’ or - Earth

E

L

5A Fuse

N

Connect
brown lead
to ‘L’ - Live

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 20 -

Other Information

The Argos Technical Helpline is here to help

Technical experts are available 7 days a week

• Simple help and advice on setting up your digital

equipment (image).

• Guidance on connecting other devices to your

television such as a DVD player, Sky, home cinema
system or a games console.

• Order spare parts, including that lost remote

control.

• Any other technical issues you may need

assistance with.

Call us today: 0345 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential

lines depending on your call plan/tariff. Mobile and other providers costs may vary,
see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 21 -

Guarantee

This product is guaranteed for twelve months from the date of original purchase.

Any defect that arises due to faulty materials or workmanship will either be replaced,

refunded or repaired free of charge where possible during this period by the dealer
from whom you purchased the unit.

Product Guarantee

This product is guaranteed against manufacturing defects for a period of

Year

The guarantee is subject to the following provisions:

• The guarantee does not cover accidental damage, misuse, cabinet parts, knobs

or consumable items.

• The product must be correctly installed and operated in accordance with the

instructions contained in this manual.

• It must be used solely for domestic purpose.

• The guarantee will be rendered invalided if the product is re-sold or has been

damaged by inexpert repair.

• Specifications are subject to change without notice.

• The manufacturer disclaims any liability for the incidental or consequential damages.

• The guarantee is in addition to, and does not diminish your statutory or legal rights.

• In the event of a problem with the product with in the guarantee period call the

Customer Helpline: 0345 604 0105.

Guarantor: Argos Ltd

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 22 -

A

Product Fiche

B

C

D

E

F

G

H

I

J

K

Product No. 10091867

Model No. DLED32165HD

Energy eciency class A

Visi bl e s creen s ize

(diagonal,approx.) (inch/cm)

On mode average power

consumpon (Wa)

A nn ua l e ne rg y co ns um p on

(kWh/annum)

S ta n d by p ow e r co n su m p o n

(Wa)

O  m o de po w er c on su m p on

(Wa)

Display resoluon (px) 1366x768

Commercial Brand:BUSH

32 inches 81 cm

41

59

0,5

0

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 23 -

BUSH

DLED32165HD

59

41

32

81

50281645

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

English - 24 -

Home Retail Group

489-499 Avebury Boulevard
Saxon Gate West
Central Milton Keynes

MK9 2NW