Bush 478-7130, 764-3628, 764-3659 Instruction manual

Integrated Dishwasher
/
Dishwasher
Installation & User InstructionsPlease keep for future reference 478
Installation & User InstructionsPlease keep for future reference
7130
764/3594 478/7130
764/3628 478/7130
764/3659
ImportantPlease read these instructions fully before installing or using
These instructions contain important information which will help you get the best from your appliance and ensure safe and correct installation, use and maintenance.
If you need help or have damaged or missing parts, call the
Customer Helpline: 0345 600 4632
Issue – 1
01 45//20
Contents
Safety Information 2-3 Parts Installation 5-7
Water supply connection Drain hose connection Position the appliance Water pressure Electrical connection
User Instructions
Before first use Water softener Rinsing aid Detergent Loading your appliance 11
Wash cycle table 1
Using your appliance 15
Care and Maintenance 16
Filtering system 1 General 1
Trouble Shooting 17
Error codes 1
Technical Data
1
Disposal information 19
Guarantee 20
Sheet
4
5 5 5 6 7
1
8- 6
8-10 8 9 10
4
6 6
7
18
Product codes
9-6W WHITE
WV
WV
9-6B BLACK
WV
6S SILV ER9-
1
Safet
y
y
Information
Important – Please read these instructions full
before installation
Before use During use
The installation of this appliance is best carried out by 2 people.
y Dispose of all packaging carefully and
responsibly.
y The appliance is designed for indoor use only
and must be protected from rain, moisture and extreme temperature variations.
y This appliance is designed for household use.
Do not use the appliance for industrial and commercial use, or any other purpose.
y The appliance MUST be positioned on a firm
level base.
y Do not place the appliance near a heat source or
in direct sunlight.
y Only suitable household utensils should be
placed in the dishwasher. Avoid utensils that are non-heat-resistant, metal decorated, etc.
y Do not use detergent not designed for
dishwasher. This may damage the appliance.
y Do not spray water on the appliance. It may
cause electrical parts failure or electric shock.
y Do not stand or sit on the door when it is open. It
may cause deformation or failure of your dishwasher. The appliance could tip forward.
y Do not put any heavy objects on top of the
appliance. It will damage the appliance.
y This appliance is fitted with a safety function that
automatically stops the operation of the dishwasher when it is exposed to heavy disturbance on its mains.
y The appliance is to be connected to the water
supply using new hose set and that old hose set should not be used.
y The door should not be left in open position since
this could present a tripping hazard.
y This appliance must be positioned so that the
plug is accessible.
y
This appliance is intended to be used in household and similar applications such as:
-staff kitchen areas in shops, offices and other working environments;
-farm houses;
-by clients in hotels, motels and other residential type environments;
-bed and breakfast type environments.
y This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
y This appliance is not intended for use by young
children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance.
y Do not touch the visual heating element during or
immediately after use.
y
Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door carefully if the dishwasher is operating, there is a risk of water squirting out.
y WARNING: Knives and other utensils with sharp
points must be loaded in basket with their points down or placed in a horizontal position. Avoid damage to the door seal.
y Load plastic items so that they do not come into
contact with the visible heating element.
y Dishwasher detergents are strongly alkaline, they
can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.
y The door should not be left open, since this could
increase the risk of tripping.
y Keep detergents away from children. y Do not attempt to repair the appliance yourself.
Contact the Customer Helpline: 0345 600 4632.
2
Safet
y
y
Information
Important – Please read these instructions full
before installation
y This appliance is intended to be used in household
and similar applications such as:
-staff kitchen areas in shops, offices and other working environments;
-farm houses;
-by clients in hotels, motels and other residential type environments;
-bed and breakfast type environments.
y This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
y To protect against the risk of electrical shock, do not
immerse the unit, cord or plug in water or other liquid.
y Please unplug before cleaning and maintenance the
appliance.
y Use a soft cloth moisten with mild soap, and then use a dry
cloth to wipe it again.
y If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
3
If you have damaged or missing parts,
Part
Please familiarize yourself with the parts and accessories listed below
call the Customer Helpline: 0 45 600 4632
3
5
4
11 2
1. Upper basket
2. Spray arms
3. Lower basket
4. Salt container
5. Main filter
6. Detergent dispenser
3
1. Power indicator light and switch
2. Display window
3. Delayed start button
4. All in 1 function button and indicator light
5. Salt and rinse aid warning lights
6. 1/ 2 key-press and indicator light
7. Washing program selector
6
7 8
8. Start and reset button
7. Cup shelf
8. Cutlery basket
9. Coarse basket
10. Rinse aid dispenser
11. Drain pipe connector
12. Inlet pipe connector
Accessories included
Instructions x 1 Hose x 1 Salt Filler x 1 Measuring Spoon x 1 Measuring Cup x 1
Inlet Hose x 1
4
Installation
Water supply connection
Caution: 2 people are required to unpack and handle the appliance, it is recommended that gloves are worn.
y Carefully remove all packaging materials
including the foam base, dispose of correctly.
y Connect the cold water supply hose to a
threaded ¾” connector and make sure that it is fastened tightly in place.
y If the water pipes are new or have not been
used for an extended period of time, let the water run to make sure that the water is clear. This will prevent the water inlet to be blocked and damage the appliance.
WARNING: Please close the hydrant after using.
Drain hose connection
1. Make a hooked end at the end of drain hose with the plastic U-bend fitting (provided). The hooked end should be dropped into a drainage standpipe between 40cm and 100cm from the floor level.
2. The free end of the hose must not be immersed in water to avoid the flow back.
3. You may connect the water inlet hose onto the kitchen sink tap. You must obtain a correct adaptor to match the inlet hose connector for a secure connection. However, permanent plumbing is recommended.
4. If leakage is observed, immediately shut off the water supply and check the hose connections fully. Tighten connections if necessary.
Position the appliance
1. The dishwasher must be installed on a solid level surface.
2. Position the appliance in the desired location. The back should rest against the wall behind it, and the sides along the adjacent cabinets or wall. The water supply and drain hoses can be positioned either to the left or right side to facilitate proper installation.
3. To level the dishwasher, adjust the 4 level screws (feet) under the dishwasher.
5
Installation
Water pressure
For best operating results, incoming water pressure should be between 0.04 and 1 Mpa.
Your dishwasher cleans by spraying a mixture of hot clean water and detergent (under pressure) against the soiled surface of dishes. The water is pumped through a rotating spray arm, drained through a filter removing food and soiled particles and pumped back through the spray arm.
Note: Hard water conditions will adversely affect the performance of your dishwasher. To minimise this condition, it is recommended to periodically operate/rinse the dishwasher in empty condition using 1 cup of white vinegar (at least once a week).
Important: Once you open the water supply (even if it is closed immediately thereafter), the water inlet hose will be pressurised.
6
Installation
Electrical connection
Any electrical work that is required to install this appliance MUST be carried out by a qualified electrician.
Warning: THIS APPLIANCE MUST BE EARTHED
Before making any electrical connections, ensure that:
y Electrical safety is only guaranteed when the
earth system of your house is in accordance with the related local regulations.
y Do not bend, stretch or pull the supply cable to
avoid electric shock.
y Ensure the power socket is suitable for the
maximum power of the appliance (fuses in the power circuit must be 13 amp).
y The supply voltage should be the same as that
indicated in the technical specifications and the appliance rating plate.
y The appliance should be earthed and in
compliance with the applicable law.
y When installed, the power socket must be
within easy reach.
y If the socket outlets in your home are not
suitable for the plug supplied with this unit check with a qualified electrician for replacement.
y The use of adapters, multiple connectors or
extension cables are not recommended.
y The appliance must be connected to a 220-
240 volt 50Hz AC supply by means of a three pin socket, suitably earthed and protected by a 13 amp fuse.
y Should the fuse need to be replaced, a 13
amp fuse approved to BS1362 must be used.
y The plug contains a removable fuse cover that
must be refitted when the fuse is replaced. If the fuse cover is lost or damaged, the plug must not be used until a replacement cover has been fitted or the plug is replaced.
y A damaged plug should be cut off as close to
the plug body as possible, the fuse should be removed and the plug disposed of safely.
Plug replacement (UK & Ireland only)
Should you need to replace the plug; the wires in the power cable are coloured in the following way:
Blue – Neutral ‘N’ Brown – Live ‘L’ Green & Yellow – Earth ‘E’ As the colours of the wires in the power cable
may not correspond with the coloured markings identifying the terminals in your plug, and proceed as follows:
The green & yellow wire must be connected to the terminal in the plug that is marked with the letter E or by the earth symbol.
The blue wire must be connected to the terminal that is marked with the letter N.
The brown wire must be connected to the terminal that is marked with the letter L.
If power supply cord is damaged, it must replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
7
User Instructions
Before first use
Before using your appliance for the first time: y Set the water softener y
Add 1.5Kg dishwasher salt and then
the salt container with water
y Fill the rinse aid dispenser y Fill in detergent
full fill
Water Softener
The dishwasher is designed with a softener to eliminate the minerals and lime from the water supply. The hardness of the water supply varies from place to place and will affect the dishwasher performance. The amount of salt consumed can be adjusted based on the hardness of the water used. This is intended to optimise and customize the level of salt consumption.
Adjusting salt consumption
1. Unscrew and remove the cap from the salt
container.
2. There is a ring on the container with an arrow.
Rotate the ring in anticlockwise direction from “-“ sign towards “+” sign, based on the table at right.
Loading the salt into softener
1. Remove the lower basket and then unscrew
and remove the cap from the salt container. (Fig 1)
2. Place the end of the funnel(supplied) into the hole and introduce about 1.5kg of dishwasher salt.
3. Full fill the salt container with water.It is normal for a small amount of water to come out of the salt container. (Fig 2)
4. Screw the cap tightly back clockwise.
5. Immediately after filling the salt, a washing cycle should be started (soak or rapid program suggested). Otherwise the filter system or pump may be damaged by salty water.
Water
hardness
(°
Clarke)
0 ~ 10 / 0 / 10 ~ 28 - 20 50 28 ~ 56 Mid 40 25 56 ~ 75 + 60 16
Selector
position
Salt
consumption
(gram/cycle)
Autonomy
(cycle/
1kg)
Important:
y Only use dishwasher salt y Add the salt again when the salt warning light
at control panel is on.
y It takes time to dissolve the salt so the salt
warning light may still come on even the salt container is filled.
8
User Instructions
Before first use
Rinsing Aid
A rinsing aid is specially formulated to rinse away food and detergent residues that can be left behind on your dishes. Use regularly, a rinse aid will automatically provide you with cleaner dishes every time you wash.
Loading the rinsing aid
1. Turn the dispenser cap to ‘open’ arrow and lift it out.
2. Fill the rinsing aid slowly into the container until it just reaches the bottom of the filling cap
3. Replace the cap by turning to ‘close’ arrow.
There is a rinse-aid indicator on the dispenser
Full 3/4 Full 1/2 Full 1/4 Full – Require refill Empty – Require refill
Adjusting rinsing aid dispenser The rinse aid dispenser has six scales. Always start with the dispenser set on "4". If spots and poor drying is a problem, increase the amount of rinse aid dispensed by removing the dispenser lid and rotating the dial to "5". You could adjust the dial to the next higher lever until your dishes are spot-free.
Note:
Increase the dose if there are drops of water or lime spots on the dishes after wash. Reduce the dose if there are sticky whitish stains on your dishes or a bluish film on glassware or knife blades.
9
User Instructions
Before first use
Detergent
Use only detergent specifically made for use in dishwashers, as other types may damage the dishwasher.
The dispenser must be filled before the start of each wash cycle following the instructions provided in the wash cycle table. Your dishwasher uses less detergent and rinse aid than conventional dishwasher. Generally, only one tablespoon of detergent is sufficient for a normal wash load. Heavily soiled items need more detergent. Always add the detergent just before the start of the dishwasher, otherwise it could get damp and will not dissolve properly.
Loading the detergent
1. The detergent dispenser (recessed area)
located at the inside of the door.
2. Open the lid by pressing the release button.
3. Pour the detergent. The marking indicates the
dosing levels: A – Detergent for main wash cycle. ‘MIN’ means approximately 20g of detergent. B – Detergent for pre-wash cycle, approximately 5g of detergent.
4. Close the lid until it locks in place.
Note: follow the detergent manufacturer’s guidelines. Dishwasher detergent is corrosive! Keep it out of reach of children.
Use of “2 in 1”, “3 in 1”, “4 in 1” and “5 in 1” detergents These products are detergents with integrated detergent, rinse aid and salt functions. Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers (packaging). These products should be strictly used according to the detergent manufacturer's instructions. In general detergents that include rinse aid or water softener are only able to serve good results under certain conditions - rinse aid and water softener cannot adapted to specific conditions. For this reasons in some cases there might be unwanted cleaning or drying results.
If you encounter problems when using these products please contact the detergent manufacturers care line. The manufacturer of your dishwasher is not liable for damages caused by compact detergents nor gives warranty if you use compact detergents.
10
User Instructions
Loading your dishwasher
Preparing your dishes prior washing
y Scrape off all food residuals from the dishes. y Remove excessive quantities of oil or grease. y Empty any liquids from glasses and cups. y Dishes with dried-on foods are more difficult to
wash and may not come clean in a normal wash cycle.
y Arrange all items with recessed or curved
sections on a slant to drain water away.
y Cups, pots and glasses etc should be placed
upside down.
Loading the upper basket The upper basket is designed to hold more
delicate and lighter dishware such as glasses, coffee and tea cup and saucers, plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water.
Adjusting the upper basket The height of the upper basket can be adjusted
in order to create more space for large utensils both for the upper/lower basket. The height of the upper basket can be adjusted by placing the wheels on different height of the rails. Long items, serving cutlery, salad servers and knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms. The shelf can be folded back or removed when not in use
11
User Instructions
Loading your dishwasher
Loading the lower basket y Put large items which are most difficult to
clean into the lower basket.
y Locate sharp items so that they are not likely
to damage the door seal.
y Load sharp knives with the handles up to
reduce the risk of injuries.
y Do not load plastic items unless they are
marked "dishwasher safe" or the equivalent.
y Do not load glasses over the dish rack pins.
Glasses loaded over dish rack pins are not properly supported and are likely to get damaged.
y Items with wooden or bone handles and items
joined together with glue are unsuitable as they cannot resist hot water.
Folding spikes For better stacking of pots and pans, the spikes
can be folded down as shown in right.
Cutlery basket Cutlery should be placed in the cutlery basket
with the handles at the bottom. If the rack has side baskets, the spoons should be loaded separately into the appropriate slots, especially long utensils should be placed in horizontal position at the front of the upper basket as shown.
1. Tea spoons
2. Dessert spoons
3. Soup spoons
4. Forks
5. Knives
6. Serving forks
7. Serving spoons
12
User Instructions
Loading your dishwasher
NOTE: For ease of loading/unloading large size dinner plates from the dish rack it may be necessary to remove the cutlery basket. When loading/unloading is complete, return the cutlery basket to its original position.
Warning
y Do not touch the heating element during or immediately after use. y Do not tamper with controls. y Do not abuse, sit or stand on the open door or dish-rack of the dishwasher. The machine may topple
over.
y Protect cables and hoses from high temperatures. y To reduce the risk of injury, do not allow children to operate or play with the dishwasher.
13
User Instructions
Wash cycle table
Cycle Selection
Cycle Selection
Cycle Selection
ProgramProgram
ProgramProgram
Cycle Selection
Information
Information
Information
Information
For heaviest soiled crockery, and normally soiled pots pans dishes etc with dried on soiling;
Description
Description
Description
Description
of Cycle
of Cycle
of Cycle
of Cycle
Pre-wash(50 ) Wash (65 ) Rinse Rinse Rinse (55 ) Drying
Detergent
Detergent
Detergent
Detergent
pre/main
pre/main
pre/main
pre/main
5/22g
Running
Running
Running
Running
time(min)
time(min)
time(min)
time(min)
120
Energy
Energy
Energy
Energy
(Kwh)
(Kwh)
(Kwh)
(Kwh)
1.13
Water
Water
Water
Water
(L)
(L)
(L)
(L)
16.0
Rinse
Rinse
Rinse
Rinse
Aid
Aid
Aid
Aid
(*EN5 0242)
For normally soiled loads, such as pots plates glasses and lightly soiled pans.
This is standard programme, it is suitable to clean normally soiled tableware and it is the most efficient programme in terms of its combined energy and water consumption for that type of tableware.
For lightly soiled crockery and glass
For lightly soiled loads that do not need excellent drying efficiency.
A shorter wash for lightly soiled loads and quick wash
Pre-wash(50 ) Wash (55 ) Rinse Rinse(65 ) Drying
Pre-wash Wash (50 ) Rinse (60 ) Drying
Pre-wash Wash (40 ) Rinse Rinse (60 ) Drying
Wash(60 ) Rinse Rinse (50 ) Drying
Wash (40 ) Rinse Rinse (40 )
5/22g
5/22g
15 g.
27g
15 g.
155
160 0.77
95 0.71
60
30
1.09
0.77 10.0
0.50
13.0
10.5
13.0
9.0
14
User Instructions
Using your appliance
To operate the dishwasher:
1. Make sure the water inlet and drain hoses are correctly and securely connected.
2. Push the door release button to open the door.
3. Fill the detergent, water softener and rinsing aid to the dishwasher.
4. Draw out the lower and upper basket. Load the dishes on the dish rack and cutlery inside the cutlery
basket. Make sure that the rotating spray arm can turn freely all the way round. If necessary remove any obstacles.
5. Close the door firmly. Open the water supply.
Press the ON/OFF button, and the ON/OFF light will turn on. Turn the program selector to select
6.
a desired wash cycle, press the Start/Reset button , the machine will work after 10 seconds.
7. The dishwasher is designed to stop if the door is opened accidentally during operation.
8. The dishwasher stops automatically at the end of the program. You will hear 8 sec. buzzer sound. The
power pilot light will remain illuminated until the power is switched off.
9. After washing, dishes should be allowed to cool down for about 15 minutes as they are hot to handle.
Dishes will cool quicker if the door is opened slightly.
10. Empty the lower basket first and then the upper one. This will avoid water dripping from the upper
basket onto the dishes in the lower one.
11. After unloading the dishes, remove and clean the filter and return to its position.
Note: This is normal when you noted small amount of water being pumped-out from the drain hose prior to the start of a wash cycle. This is because the pump retains a small amount of water from the previous cycle.
Program Selection Change
You can modify the washing program when the dishwasher just runs for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled.
Press the Start/Reset button, the dishwasher will be paused, then press the Start/Reset button more than 3 seconds to cancel the current program , you can change the program to the desired cycle setting
Note: If you open the door during the washing cycle, the machine will pause. When you close the door, the machine will resume operation after 10 seconds.
The Display window shows the state of the dishwasher: a) Colon icon in the LED display is on but not blinking---------stand by or pause b) Colon icon in the LED display blinking---------------------------Running
Delay function
After selecting the wash cycle program, you can set the desired delay start time by pressing the delay button. You can select 1-24h from the program. The dishwasher will start operation after the selected delay time is elapsed.
15
Care and Maintenance
General
Important: Always unplug the appliance from the power socket during cleaning and
maintenance. y Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax
polish for cleaning.
y Clean the external surfaces with a damp soft cloth only. Never use abrasive products or solvents as it
may damage the dishwasher.
y One of the factors that cause odour is the food that remains trapped in the seals. Periodic clean the
seal with a damp sponge will prevent this from occurring.
The filter system consists of a main filter, coarse filter and fine filter. y Main filter (1) - Food and soil particles trapped in this filter are
pulverized by a special jet on the lower spray arm and washed down the drain.
y Coarse filter (2) - Larger items such as pieces of bones that could
clog the drain are trapped in the coarse filter. To remove an item caught in this filter, gently squeeze the taps on the top of this filter and lift it out.
y Fine filter (3) - This filter holds soil and food residues in the sump
area and prevents it from being re-deposit on the dishes during a cycle.
Cleaning the filter
1. Remove the filter from the bottom.
2. Clean the filter thoroughly under the running water tap.
3. Return the filter to its position
Warning: Under no circumstances may the dishwasher be used without filters.
Cleaning the spray arms It is necessary to clean the spray arms regularly as hard water
chemicals will clog the spray arm jets and bearings.
1. Remove the upper spray arm by screw off the nut clockwise and then remove the arm.
2. Remove the lower spray arm by pulling out the spray arm upward.
3. Wash the arms in soapy and warm water and use a soft brush to clean the jets.
4. Replace them after rinsing them thoroughly.
Not use for long period If you are not using the dishwasher for a long period of time it is recommended to remove the plug, turn
off the water supply and leave the door ajar to prevent odors from forming within the dishwasher.
Moving the dishwasher If you need to move the dishwasher, try to keep it in vertical position. Avoid over tilting during the
transportation.
16
Trouble Shooting
In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below. If the problem persists, contact the retailer if the machine is still under guarantee. If the machine is out of guarantee, contact an approved service agent on 0 45 600 4632.
Problem Possible cause Solution
3
Dishwasher does not start
Dishwasher does not load water
Dishes not clean y Improper or over loading.
Dishwasher does not drain
Noise y Spray arm is knocking against an item
y The mains plug is not plugged in. y Door is not closed. y Water supply is not turned on.
y Low water supply pressure. y The water supply hose is crimped or
bent.
y Filter is clogged.
y Spray arm not rotating freely. y Not enough detergent and/or
improper detergent is used.
y Improperly prepared dishes.
y The drain hose is crimped or bent. y Ensure the hose is not crimped or
in basket.
y Items of crockery are loose in the
wash cabinet.
y Insert the mains plug. y Close the door. y Turn on the water supply.
y Check the water pressure. y Ensure the hose is not crimped or
bent.
y Clean the filter. y Arrange dishes so spray action
reaches all surfaces. Do not overload the dishwasher.
y Make sure nothing (i.e. cutlery) is
obstructing spray arm rotation.
y Use proper dishwasher detergent. y Remove excessive food and liquids
from dishes before loading.
bent.
y Interrupt the program and re-arrange
the items which are obstructing the spray arm.
y Interrupt the program and re-arrange
the items of crockery.
Unsatisfactory drying result
Error codes Description Possible causes
E1
E4
Warning:
- If overflow occurs, turn off the water supply before contacting the customer helpline.
- If there is water in the base pan because of overfill or small leak, the water should be removed before restarting the dishwasher.
y Improper loading. y Too little rinse aid.
y Dishes are removed too soon.
y Wrong program has been selected.
y Longer inlet time
y Overflow y Some element of dishwasher leaks.
y Load as suggested in instructions. y Increase the rinse aid amount or
refill the rinse aid dispenser.
y Do not empty the dishwasher
immediately after wash.
y Washing temperature is lower in
short program. Choose a program with a long washing time.
y Faucet is not opened, water intake is
restricted or water pressure is too low.
17
Technical
specificat ions (accordi ng to EU Directiv e 1 0 59/2010)
Brand Model
Capacity Energy efficiency class Annual energyconsumption Energy consumptio n of the standard cleaning cycl e Power consumption of off-mode / left-on mode Annual water consumption Drying efficiency class Standard cleaning cycle Program time for the standard cleani ng cycle Noiselevel Free standing / Built-in
Dimension Power con sum ption
BUSH
WV9-6W,WV9-6S,WV9-6B
9 settings A+
222 kWh
0.77 kWh
0W/
0.4 W
29 40 l itre A
ECO 50
6 min
1 0 5 dB(A)re1pW
2
Freestanding W450 X D580XH850mm
1760-2100 W Rated voltage Water pres sure (flow pressure)
NOTE
A+ + + (most efficiency) to D (least efficiency) Energy con s umptio n 2 kWh per year, b ased on 280 stan dard cl ean ing cycles using cold water fill and
the c onsumpt io n of the low power modes. Actual en ergy consum ption will depend on how the applian ce is used. Water consumptio n 2940 litres per ye ar, based on 280 standard cleaning cyc les. Actu al water consumption
will d epend on how the appliance is used. A(most efficiency) to G (least efficiency)
This program is suitable for cleaning normally soiled tableware, and that it is the mostefficientprogrammein terms of itscombinedenergyand waterconsumption for thattypeof tableware.
The ab ove values have been measur ed in accordance with standar ds under specified operating conditions. Results may vary greatly according to quantity and pollutio n of the dishes, water hardness, amount of detergent, etc.
We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may occur as a result of product improvements and development.
22
“”
“”
220-240 V~ 50 Hz
0.04-1M a
P
18
This appliance complies with the following EEC directives: 2006/95/EEC Low voltage directive 2004/108/EEC EMC directive 2009/125/EC ERP directive
Disposal information
The symbol on the product or its packaging indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local council office, your household waste disposal service or the shop where the product was purchased.
19
Guarantee
This product is guaranteed against manufacturing defects for a period of
PRODUCT GUARANTEE
This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.
The guarantee is subject to the following provisions: y The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or
consumable items.
y The product must be correctly installed and operated in accordance with the instructions
contained in this manual.
y It must be used solely for domestic purpose.
y The guarantee will be rendered invalided if the product is re-sold or has been damaged by
inexpert repair.
y Specifications are subject to change without notice. y The manufacturer disclaims any liability for the incidental or consequential damages. y The guarantee is in addition to, and does not diminish your statutory or legal rights. y In the event of a problem with the product within the guarantee period call the Customer
Helpline on 0 45 600 4632.
3
Guarantor: Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Year
Loading...