Bush 40IN FHD Quick Start Guide

Using your TV for the ﬁrst time

Let’s get started

Troubleshooting

Help is always at hand

Quick start guide

DLED40287FHD

Contact:

www.argos-support.co.uk

Electronic Programme Guide (EPG)

Some channels send information about their broadcast schedules. Press the Epg button to view the Programme Guide menu.

There are 3 dierent types of schedule layouts available, Timeline Schedule, List Schedule and Now/Next Schedule. To switch between them follow the instructions on the bottom of the screen.

Timeline Schedule

Zoom (Yellow button): Press the Yellow button

to see events in a wider time interval.

Filter (Blue button): Views ﬁltering options.

Highlight Genre (Subtitles button): Displays Highlight Genre menu. Using this feature, you

can search the programme guide database in accordance with the genre. Info available in the programme guide will be searched and results matching your criteria will be highlighted.

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected events.

Next/Prev Day (Programme +/- buttons):

Displays the events of previous or next day.

Search (Text button): Displays Guide Search menu.

Now (Source button): Displays current event of the highlighted channel.

List Schedule(*)

(*) In this layout option, only the events of the

highlighted channel will be listed.

Prev. Time Slice (Red button): Displays the events of previous time slice.

Next/Prev Day (Programme +/- buttons):

Displays the events of previous or next day.

Event Details (Info button): Displays detailed information about selected events.

Filter (Text button): Views ﬁltering options.

Next Time Slice (Green button): Displays the

events of next time slice.

Options (OK button): Displays event options.

Now/Next Schedule

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected events.

Filter (Blue button): Views ﬁltering options.

Event Options

Use the directional buttons to highlight an event and press OK button to display Event Options menu. The following options are available.

Select Channel: Using this option, you can switch to the selected channel.

Set Timer on Event / Delete Timer on Event: After you have selected an event in the EPG menu, press the OK button. Select Set Timer on Event option and press the OK button. You can set a timer for future events. To cancel an already set timer, highlight that event and press the OK button. Then select Delete Timer on

Event option. The timer will be cancelled.

Notes: You cannot switch to any other channel

or source while there is an active timer on the current channel.

It is not possible to set timer for two or more individual events at the same time interval.

Help and assistance

If you require any technical guidance or find that your TV is not operating as intended, a simple

solution can often be found in the Troubleshooting section of the instruction manual or online

at www.argos-support.co.uk

If you still require further assistance, call one of our experts on 0 345 604 0105*. To help us give

you a fast and efficient service please have the following information ready:

You can find these

Model Ref.

Serial number

Date of purchase

Local call rates applies*

on the rating plate - a

small information

panel (usually a

sticker or metal plate)

on the rear of your TV

This will be shown

on your receipt

Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tari. Mobile and other providers costs may vary, see www.bt.com/pricing for details.

For security and training purposes, telephone calls to and from customer service centres may be recorded and monitored. Calls from Republic of Ireland will attract international call charges.

Helpline: 0345 604 0105

If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of the Instruction manual or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0 345 604 0105.

Connections

LANG.

BACK

EXIT

Q.MENU

7 8

.,/@

Getting to know your TV

Bringing it all together

You’ll soon be enjoying your new TV.

This guide will help you get started, full details of your TV and its features can be found in the Instruction manual.

Aerial connection

Connect the aerial TV plug to the AERIAL

INPUT (ANT) socket located on the back of the

TV. (Fig 1)

Fig 1.

Power connection

IMPORTANT: The TV set is designed to

operate on 220-240V AC, 50 Hz socket.

After unpacking, allow the TV set to reach

the ambient room temperature before you

connect the set to the mains. Plug the power

cable to the mains socket outlet.

Connecting other devices to your TV

Inserting Batteries into the Remote

Fig 2.

Control

Remove the screw that secure the battery compartment cover on the back side of the remote control ﬁrst. Lift the cover gently. Insert two size AAA batteries. Make sure the (+) and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with same or equivalent type. Place the cover back

on. Then screw the cover back on again.

See page 18 of the user guide for details on

which other devices you can connect to your

TV.

If you want to connect a device to the TV,

make sure that both the TV and the device are

turned off before making any connection. After

the connection is done, you can turn on the

units and use them.

You’ll be up and running in no time

To Switch the TV On

Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

Press the Standby button, Programme +/- or a numeric button on the remote control.

•Press the side function switch on the TV until

the TV comes on from standby.

Changing Channels and Volume

You can change the channel and adjust the

volume by using the Programme +/- and

Volume +/- buttons on the remote.

To Switch the TV O

Press the Standby button on the remote

control or press the side function switch on

the TV until the TV switches into standby

mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby

mode, the standby LED can blink to indicate

that features such as Standby Search, Over Air

Download or Timer is active. The LED can also

blink when you switch on the TV from standby

mode.

You’ll be up and running in no time

First Time Installation

When turned on for the ﬁrst time, the language selection screen is displayed. Select the desired language and press OK.

On the next screen, set your preferences using the directional buttons.

Note: Depending on the Country selection you may be asked to set and conﬁrm a PIN at this point. The selected PIN cannot be 0000. You have to enter it if you are asked to enter a PIN for any menu operation later.

About Selecting Broadcast Type

Digital Aerial: If Digital Aerial broadcast search

option is turned on, the TV will search for digital terrestrial broadcasts after other initial settings are completed.

Additionally you can set a broadcast type as your favourite one. Priority will be given to the selected broadcast type during the search process and the channels of it will be listed on the top of the Channel List. When ﬁnished, press OK to continue.

You can activate Store Mode option at this point. This option will conﬁgure your TV’s settings for store environment and depending on the TV model being used, the supported features of it may be displayed on the top of the screen as an info banner. This option is intended only for store use. It is recommended to select Home Mode for home use. This option will be available in System>Settings>More menu and can be turned o/on later.

Press OK button on the remote control to continue.After the initial settings are completed TV will start to search for available broadcasts of the selected broadcast types.

After all the available stations are stored, scan results will be displayed. Press OK to continue. The Edit Channel List menu will be displayed next. You can edit the channel list according to your preferences or press the Menu button to quit and watch TV.

While the search continues a message may appear, asking whether you want to sort channels according to the LCN(*). Select Yes and press OK to conﬁrm.

(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel number sequence (if available).

Note: Do not turn o the TV while initializing ﬁrst time installation. Note that, some options may not be available depending on the country selection.

You’ll be up and running in no time

Remote Control

(*) MY BUTTON 1 & MY BUTTON 2:

These buttons may have default functions depending on the model. However you can set a special function to these buttons by pressing on them for ﬁve seconds when on a desired source or channel. A conﬁrmation message will be displayed on the screen. Now the selected MY BUTTON is associated with the selected function.

Note that if you perform First Time Installation, MY BUTTON 1&2 will return to their default

function.

1. Standby: Switches On / O the TV

2. Numeric buttons: Switches the channel, enters a

number or a letter in the text box on the screen.

3. TV: Displays channel list / Switches to TV Source

4. Mute: Completely turns o the volume of the TV

5. Volume +/-

6. Menu: Displays TV menu

7. Directional buttons: Helps navigate menus, content

etc. and displays the subpages in TXT mode when pressed Right or Left

8. OK: Conﬁrms user selections, holds the page (in TXT

mode), views channel list (DTV mode)

9. Back/Return: Returns to previous screen, opens index

page (in TXT mode)

10. Media browser: Opens the media browsing screen

11. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

12. My button 1 (*)

13. Coloured Buttons: Follow the on-screen instructions

for coloured button functions

14. Language: Displays and changes audio/subtitle

language (digital TV, where available)

15. Subtitles: Turns subtitles on and o (where available)

16. Rapid reverse: Moves frames backwards in media

such as movies

17. No function

18. Play: Starts to play selected media

19. Stop: Stops the media being played

20. Rapid advance: Moves frames forward in media such

as movies

21. Pause: Pauses the media being played

22. Screen: Changes the aspect ratio of the screen

23. Text: Displays teletext (where available), press again

to superimpose the teletext over a normal broadcast picture (mix)

24. My button 2 (*)

25. EPG (Electronic programme guide): Displays the

electronic programme guide

26. Exit: Closes and exits from displayed menus or returns

to previous screen

27. Quick Menu: Displays a list of menus for quick access

28. No function

29. Programme +/-

30. Swap: Quickly cycles between previous and current

channels or sources

31. Source: Shows all available broadcast and content

sources