Bush 40-402 Instruction manual

40” 4K Ultra HD LED TV

Installation & Operating Instructions - Please keep for future reference

359/5543D

40/402UHD

Important - Please read these instructions fully before installing or operating

These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.

For any help concerning set up and use of your TV please call the
Customer Helpline: 0871 2000 463 (Calls cost 10p per minute plus any network extras)

Lines open: 8.30am - 6pm Monday to Friday and 9am - 5pm Saturday

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd 1User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd 1 10/02/2015 10:34:3610/02/2015 10:34:36

2

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:2User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:2 10/02/2015 10:34:3910/02/2015 10:34:39

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Important Guarantee Information

Congratulations on purchasing this television. We hope you have many years of trouble free

enjoyment from your purchase.

Your product is covered under the manufacturers guarantee for 12 months from the date of

purchase.

If you are experiencing diffi culties with your TV, please refer to the frequently asked

questions/troubleshooting section at the rear of this user guide.

If you are still unable to remedy the issue, try resetting the TV to factory settings, (details in this

user guide) or contact the helpline.

In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home

or work address, return it to our service centre, repair the item and then return it to you.

If we believe we cannot offer a permanent repair, we will replace the item.

Helpline Information

Telephone UK 0871 2000 463, ROI 01443 3940

Web support: www.umc-uk.co.uk

The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.

Calls cost 10p per minute plus any network extras.

You must retain all packaging materials, in addition to your proof of purchase/receipt, as you will need

these in the event of warranty/service support.

This guarantee is in addition to and does not affect your statutory rights.

If you need to call the helpline, you will need the following information.

1) Model Ref
_____________________________________ (You can fi nd this on the rear of the TV)

2) Date of purchase

______________________________________ (You can fi nd this on your sales receipt)

3) Serial Number

_______________________________________ (You can fi nd this on the rear of the TV)

Example Only

Model No.

Serial No.

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:3User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:3 10/02/2015 10:34:3910/02/2015 10:34:39

HA40O402B1UKPSG

Important Safety Instructions

IMPORTANT - Please read these instructions. All the safety and operating instructions
should be read before the appliance is operated.

Warnings

• To reduce the risk of fi re, electric shock or
damage to the television, do not expose it to dust,
rain or moisture, or place any objects fi lled with
liquids on or near the television.

• Do not place the television in a confi ned space.
Ensure that nothing can obstruct the ventilation
openings at the rear of the television.

To prevent the spread of fi re, keep
candles or other open fl ames away
from this product at all times

• Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local
authority for details of recycling.

Safety

• For your safety, this appliance is fi tted with a
fused moulded 3 pin mains plug. Should the
fuse need to be replaced, ensure that any
replacement is of the same amperage and
approved with the BSI mark.

• The television should be connected to a
main socket outlet with a protective earthing
connection.

• Never try and replace the mains plug unless
you have adequate qualifi cations and are
legally authorised to do so. In the event that a
replacement Mains cable is required, contact the
manufacturer for a suitable replacement.

• Never use the television if it is damaged in
any way.

• Always place the television on a fl at level surface
avoiding anywhere which may be subject to
strong vibration.

• Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.

• Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference with the television. If interference
is apparent, move the device causing the
interference, near the television.

• To disconnect the apparatus from the mains,
please use the mains plug located on the
underside/rear of the TV. The mains plug shall
remain readily operable.

• Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fi re or the like.

• Install the product at least 5cm from the wall for
ventilation.

• Ensure that the power switch on the unit and the
mains plug are always easily accessible.

WARNING: Excessive noise when using earphones
and headphones can cause loss of hearing.

Maintenance

• To clean this unit, wipe with a soft, dry cloth. If
the surfaces are extremely dirty, use a soft cloth
dipped in a soap and water solution or a mild
detergent solution.

• Never use alcohol, paint thinner
or benzene to clean this unit.

• Before using a chemically treated
cloth, read the instructions that
came with the cloth carefully.

CAUTION: If water or other liquid enters the television
through the display panel surface or back cover a
malfunction may occur.

Packaging

• The safest way to transport your item is in
the original box/packaging - please save your
packaging for this.

• You will need original box/packaging in the event
of warranty/service repair or support. We are
unable to carry out warranty/service if you are
unable to package the item correctly.

4

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:4User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:4 10/02/2015 10:34:3910/02/2015 10:34:39

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Important Safety Instructions

IMPORTANT - Please read these instructions. All the safety and operating instructions
should be read before the appliance is operated.

Important Information - Regarding Use of
Video Games, Computers, Captions or Other
Fixed Image Displays

The extended use of fi xed image program material
can cause a permanent “shadow image” on the
LCD/LED panel.
This background image is viewable on normal
programs in the form of a stationary fi xed image. This
type of irreversible LCD/LED panel deterioration can
be limited by observing the following steps:

1. Reduce the brightness/contrast setting to a
minimum viewing level.

2. Do not display the fi xed image for extended
periods of time.

3. Turn the power off when not in actual use.

Examples of images that you need to watch out for
are as follows (this is not an exhaustive list):

• TV Channel Logos: e.g. Shopping channel logos
and pricing displays-especially if they are bright
and stationary.

• Moving or low contrast graphics are less likely to
cause ageing of the screen.

• Time Displays

• Teletext: Do not view a stationary page for a long
period of time

• TV/DVD Menus: e.g. Listings of DVD disc content

• Pause Mode: Do not leave the TV in pause mode
for long periods of time, e.g. When watching
DVDs or videos.

How do I dispose of this product?

UK: Waste electrical products should not be disposed
of with household waste. Separate disposal facilities
exist. For your nearest facilities, please see
www.recycle-more.co.uk or in store for details.

ROI: Waste electrical products should not be
disposed of with household waste. Separate disposal
facilities exist. Check with your Local Authority or
retailer for recycling advice.

Batteries

• Do not expose batteries to high
temperatures, excessive heat,
prolonged sunshine or fi re as
this may cause leakage, explosion
or ignition.

• Observe the correct polarity when
inserting batteries.

• Do not use different types of
batteries together or mix old and
new batteries.

• Dispose of batteries in an
environmentally friendly way.

• Certain regions may regulate the
disposal of batteries.

Please consult your local authority.

Cd

Important - Once ‘shadow image/screen burn’
occurs, it will never disappear and is not
repairable under warranty.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:5User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:5 10/02/2015 10:34:3910/02/2015 10:34:39

5

6

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:6User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:6 10/02/2015 10:34:3910/02/2015 10:34:39

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Contents

Manufacturers Guarantee Information 3

Important Safety Instructions 4-5

What is included in the box 9

Attaching the stand 10

Detaching the stand and securing the TV
to a wall 11

Wall mounting 12

Getting Started - Initial Set Up 13

Ultra High Defi nition 4K/2K TV Information 14

Remote Control 15

TV Buttons and Input Source Menu 16

Connections 17-19

TV Menu Operation 21-27

Channel Menu 21
Picture Menu 22-23
Sound Menu 24
Time Menu 25
Settings Menu 26
Lock Menu 27

Network 29

7 Day TV Guide and Channel List 30

USB Record Digital / Freeview 31

USB Mode / Media Player 32

General Information 33-37

Using your TV with a Sky digital set top box 33

Frequently Asked Questions 34-35
Technical Specifi cations 36-37

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:7User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:7 10/02/2015 10:34:3910/02/2015 10:34:39

7

8

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:8User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:8 10/02/2015 10:34:3910/02/2015 10:34:39

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

What Is Included In The Box

Accessories
Included with this TV are the following accessories:

1 x User Guide

User Guide

1 x Quick Start Guide

QSG

1 x Remote Control & 2 x AAA Batteries

1 x Mini-AV cable

1 x Mini Component/YPbPr

1 x TV

1 x RF Cable

1 x Stand Installation Pack

(A) 6 x M(4x14)

(B) 5 x ST(3.7x20)

Please save your box/packaging as you will need this in the event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your
item in the event of warranty/service repair is in it’s original box/packaging.

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:9User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:9 10/02/2015 10:34:3910/02/2015 10:34:39

9

Attaching The Stand

To complete the stand installation you will require a cross head screw driver.

The Stand Installation pack comes with two different
types of screws.

(A) 6 x M(4x14)

fi g 1) Attach the stand neck to the rear of the TV set.

1

fi g 2) Secure the neck to the TV using the
(A) 6 x M (4x14) screws provided.

(B) 5 x ST(3.7x20)

fi g 3) Attach the wire base to the stand neck.

fi g 4) Secure the wire stand to the neck using the

(B) 5 x ST (3.7x20) screws provided.

6 x
M (4x14)

2

1 1/2

3

HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION

When securing the self-tapping screw/s into the base of the stand (on fi rst installation) the screw/s will be
naturally tight as they create a thread in the plastic of the stand neck in order to support a TV of this size.

a) Ensure the cross head screw driver tip fi ts correctly into the head of the
screw and that it is not too big or small.

b) Screw in all screws individually and partially before tightening all of the
screws fully.

c) If they become very tight try loosening them slightly and then re-tightening them once again as this will
continue the process of creating the thread for the screws.

5 x ST 3.7x20

4

10

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:10User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:10 10/02/2015 10:34:4110/02/2015 10:34:41

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Detaching the stand and securing the TV
to a wall

Detaching the Stand

To detach the stand please remove the 3 screws
highlighted then remove the stand neck and base
from the rear of the TV set.

6 x
M (4x14)

Securing the TV to a Wall

For maximum security in the home when using a TV with its stand anti-tip straps should be fi tted. These are
available from supermarket websites and other websites and are an easy, inexpensive and effective way of
ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and then tethered to
the wall of the furniture the TV is stood on.

Note - Please ensure that children do not climb on the
TV set.

A) Using one or both of the top wall-mounting holes
and screws (the screws are already supplied in the
wall mounting holes) fasten one end of the
fastening cord/s to the TV.

The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.

B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fi xings suitable for
your wall type - available separately from most
DIY stores)

RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to themselves. They
are unsteady on their feet and are attracted by colourful television images.”

The risk is increased as televisions become lighter.

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:11User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:11 10/02/2015 10:34:4110/02/2015 10:34:41

11

Wall Mounting

IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any electric wires, water or
gas pipes.

1) Remove the four screws highlighted below.

2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes are
indicated in the picture below.

IMPORTANT – If wall mounting this TV, only use the
screws already provided in the wall mounting holes.
Using other screws which are longer could cause
irreparable damage to internal parts.

For optimum viewing, if wall mounting the TV higher
than eye level, the TV should be tilted downwards so
that the TV’s screen is ‘face on’.
See fi g 1 and 2 below.

fi g 1

INCORRECT

Viewing angle

CORRECT

fi g 2

TV

TV

Viewing angle

12

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:12User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:12 10/02/2015 10:34:4110/02/2015 10:34:41

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Getting Started - Initial Set Up

1

1) Connect the power cable to the electrical outlet
(Fig A).

Using the RF cable supplied, connect the TV to the
TV Aerial wall socket (Fig B).

2) Switch on the television using the power on/off
switch located on the side/underside of the TV.

Fig A

Fig B

3) Insert the batteries supplied into the Remote
control and press the Standby button to power on the
TV.

4) You will now be welcomed with the initial set-up
screen. If it does not appear, on the remote control,
please press [MENU] then 8-8-8-8 and the menu will
appear. Press OK on the remote control and tuning
will start.*

If you are missing channels, the reason for this is
likely to be signal strength, you should consider
connecting signal booster and re-tuning the TV.

* Screen shots/images are shown for illustration
purposes only and may change dependent on
model/region.

Important

As part of our ongoing development to reduce power
consumption, we have added an extra function to
this Television called ‘Home Mode’ (you will see
this during the fi rst time installation set up). Power
consumption using the Home Mode function is
approximately 25% lower than some other modes.
The picture brightness is reduced using the Home
Mode function. If this function is not suitable for your
viewing environment, you can select other modes as
necessary. (Please note, ‘Store mode’ is for optimum
default picture settings, however, power consumption
is approximately 25% higher than ‘Home Mode’).

2

Power on/off

3

4

Please refer to the user guide section ‘Picture
settings’ in order to change the mode to one that
maybe more suitable for your environment. There
is also a shortcut button on the remote control
called ‘P-Mode’ should you wish to change to
another mode.

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:13User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:13 10/02/2015 10:34:4110/02/2015 10:34:41

13

Ultra High Definition 4K/2K TV Information

ULTRA HD 4K/2K (3840x2160) represents the next level of picture quality and clarity, boasting a resolution four
times higher than Full HD (1920x1080). Full HD TV displays over 2 million pixels that make up the image, but on a
4K Ultra HD TV there are over 8 million pixels.

4K

4096 x 2160

8,847,360 pixels

Note: not all HDMI inputs will allow the TV to display
the same resolution, please see the table below.

Port Resolution Displayed

1080i High Definition

1920 x 1080

2,073,600 pixels

Standard Def

720 x 480

345,600 pixels

HDMI 1 (1.4)
HDMI 2 (1.4)
HDMI 3 (1.4)
HDMI 4 (2.0)

4K up to 30Hz
4K up to 30Hz
Full HD Only
4K up to 60Hz

Giving your UHD TV a High Resolution input signal eliminates loss of picture quality allowing it to perform at it’s
very best. It is best to connect a 4K Device using the necessary 4K content to view Ultra HD picture quality. With an
up-scaling/1080p device the signal is essentially “stretched” to fi ll over 8 million pixels.

Connecting a Full HD 1080p/1080i device.

Connect your 1080P device (Sky HD/BluRay) to perform TV picture enhancement, see (a) for details of connection.

(a)

(b)

1080p@24Hz
HDMI1

To check your input resolution (1920x1080) simply press the button marked “i” (info) on your remote control (b).

Connecting a 4K 2160p/up-scaling device.

It is possible to ‘upscale’ your regular 1080p content to 4k using an ‘up scaling’ device/cable. These are available to
purchase separately from your retailer, see (c) for details of connection.
.

(c)

(d)

3840x2160@24Hz
HDMI1

To check your input resolution (3840x2160) simply press the button marked “i” (info) on your remote control (d).

You are now ready to enjoy the full 4K experience. For Troubleshooting see our ‘frequently asked questions page’
or visit www.umc-uk.co.uk.

14

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:14User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:14 10/02/2015 10:34:4210/02/2015 10:34:42

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Remote Control

Viewing remote control - TV

1. STANDBY

2. MUTE

3. DTV

4. RADIO

5. DVD

6. USB

7. NUMBER BUTTONS

8. TV GUIDE

9. - To return to the previous channel viewed

10. P.MODE - Scrolls through picture mode options

11. VOL

12. CH

13. S.MODE - Scrolls through sound mode options

14. FAV - To display favourites menu

15. MENU

16. EXIT

17.
on-screen menus and adjust the system settings
to your preference

18. SOURCE/AV

19. INFO - Press once for now/next channel
information. Press twice for programme
information about current programme

20. ASPECT

21. SLEEP

22. SUBTITLE

23. AUDIO

24. TEXT

25. TEXT HOLD

26. DISPLAY

27. TEXTZOOM/DVD ZOOM

28. DVD Menu/Record

- To restart the current chapter

- To advance forward to the next chapter

- To stop/eject Disc

(hold for 4 seconds to eject disc)

- To play in fast rewind mode

- To play in fast forward mode

- To play/pause

29. REC LIST

30. GOTO

31. A-B

32. REPEAT

33. ANGLE/
3D - Change to 3D mode

- Allows you to navigate the

1

2

35

4

6

7

8

9

10

11

12

13

14

15

16

17

18

20

21
24
25

19

22
23
26
27

28

29

For Models with Integrated DVD players

For Models with PVR Function

For Models with USB Playback

For Models with 3D Feature

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:15User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:15 10/02/2015 10:34:4210/02/2015 10:34:42

30

31

32

33

15

TV Buttons and Input Source Menu

1

2

3

4

5

6

7

1. Volume up and menu right

2. Volume down and menu left

3. Programme/Channel up and menu up

4. Programme/Channel down and menu down

5. Displays the input source menu

6. Displays Menu/OSD

7. Standby Power On/Off

Choosing Mode Input/Source

To switch between the different input/connections.

A) Using the buttons on the remote control:

1) Press [SOURCE] - The source menu will appear.

2) Press [\/] or [/\] to select the input you require.

3) Press [OK].

B) Using the buttons on the Television:

1) Press [SOURCE].

2) Scroll up / down using CH+/ CH- buttons to the
input/source you require.

3) Press Vol+ to change input/source to the one
selected.

Freeview TV

Analogue TV

Composite/AV

Component / YPbPr

HDMI 4

USB Media

Example of Source menu

depending on the TV model

16

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:16User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:16 10/02/2015 10:34:4210/02/2015 10:34:42

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Connections

LAN Network Connection

1

HDMI 1 HDMI input (1.4)*

2

HDMI 2 HDMI input (1.4)*

3

SCART SCART input

4

RF IN RF / TV Aerial Input

5

Digital Audio Digital Optical Audio Output

6

EARPHONE Earphone Socket

7

HDMI 3 HDMI input (1.4)*

8

CI CARD IN Common Interface module

9

COMPONENT (HD) Component input (YPbPr)

10

AV IN Audio Video Input

11

HDMI 4 HDMI input (2.0)*

12

USB USB Input

13

*Not all HDMI inputs will allow the TV to display the

same resolution, please see the table below.

1

6

Digital Audio

Output

2

3

789

CI CARD IN

EARPHONE

Port Resolution Displayed

HDMI 1 (1.4)
HDMI 2 (1.4)
HDMI 3 (1.4)
HDMI 4 (2.0)

45

10

11 12 13

Y Pb Pr

AV IN

4K up to 30Hz
4K up to 30Hz
Full HD Only
4K up to 60Hz

4

USB

**The LAN/Ethernet port is used only for Freeview
HD/Pay TV services. It is not intended to be used for
internet/network use.

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:17User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:17 10/02/2015 10:34:4510/02/2015 10:34:45

17

Connections

Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is Included In
The Box’ page.

Connecting a Camcorder, Camera or Games Console

Source should be set to Composite/AV

L (white)

R (red)

Mini
AV IN

Connecting a DVD Player/Recorder, Video Recorder or Cable/Satellite Box

AV (Yellow)

Source should be set to SCART

SCARTSCART

Connecting a High Defi nition (HD) Device
Option 1 - via HDMI to HDMI cable

A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.

Source should be set to the corresponding HDMI Port (HDMI 1, HDMI 2, etc)

Note: This model TV can not be used as a PC/laptop monitor via HDMI input. The HDMI Input is provided to view
digital content with compatible external devices..

18

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:18User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:18 10/02/2015 10:34:4510/02/2015 10:34:45

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Connections

Connecting a High Defi nition (HD) Device
Option 2 - via Component cable

If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE
connectors you must connect via Component (for picture) and by phono cable (for sound).

TV Source should be set to Component/YPbPr

Mini

YPbPr

Mini
AV IN

Video (yellow)
is not connected

Y

PB

PR

L

R

Connecting to an external audio device (Amplifi ers, Surround Sound,
Sound Bars etc)

When connecting via the TV’s 3.5mm Earphone output, this will disable the TV speakers.

There are two options when connecting a device via the 3.5mm Earphone Output and the Digital Optical
Audio Output

3.5mm

EARPHONE

DIGITAL

AUDIO

OUT

(OPTICAL)

OPTION 1 for 3.5mm EARPHONE Output

OPTION 2 for Digital Optical Audio Output

3.5mm
AUDIO

IN

DIGITAL

AUDIO

IN

(OPTICAL)

Connecting an Ethernet/Network cable

The Ethernet port is used only for Freeview HD/Pay TV services. It is not intended to be used for
internet/network use.

Ethernet
Port

Ethernet
Port

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:19User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:19 10/02/2015 10:34:4510/02/2015 10:34:45

20

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:20User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:20 10/02/2015 10:34:4510/02/2015 10:34:45

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Channel Menu

To access this menu, press [MENU] button on the
remote control. To enter a menu press [OK]

Auto Tuning
Allows you to retune the television for all digital
channels, digital radio stations and analogue
channels.

Analogue Manual Tuning

Allows you to manually tune your analogue signal

Freeview Manual Tuning

Allows you to manually tune your digital signal

Channel Edit

Allows you to delete, move, skip and add
favourite channels.

Signal Information

Displays signal strength information

CI Information

Pay per view services require a “smartcard” to be
inserted into the TV. If you subscribe to a pay per
view service the provider will issue you with a ‘CAM’
and a “smartcard”. The CAM can then be inserted
into the COMMON INTERFACE PORT (CI Card In).

If you wish to make changes to any of the default
settings, use the scroll
any settings press [OK] button.

To exit this menu at anytime, press [EXIT] button.

buttons. To confi rm

Recorded List

Lists your recorded programmes

Schedule List

Lists your programme reminders

Important:

Software Update (OAD)

Switch on/off OAD updates

Tip: If you do not press any buttons for 30 seconds,
the menu will automatically exit. You can change the
length of time before the menu exits automatically ­see ‘OSD Timer’ in the Time Menu.

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:21User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:21 10/02/2015 10:34:4510/02/2015 10:34:45

To receive Freeview channels, in particular
Freeview HD channels, you will need a Digital TV
aerial and be in a good Freeview coverage area.
You can check coverage for your postcode at
www.freeview.co.uk

Please note that any Freeview HD channels
found during tuning will be placed in channel
positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.

21

Picture Menu

Picture Mode

• Dynamic - Recommended settings for fast
moving pictures

• Standard - Default settings

• Mild - Set to be lighter in colour and less
bright

• Personal - Lets you manually alter all the
settings

• Economy - Power saving mode which reduces
the energy used by up to 25% (by reducing the
power to the LED/LCD panel). In Economy mode,
the TV will switch itself to Standby mode after 3-5
hours in the event that the TV buttons or remote
control buttons are not pressed (change the
picture mode to another setting to de-activate
this function)

To access this menu, press [MENU] button on the
remote control and scroll right.
To enter a menu press [OK]

If you wish to make changes to any of the default
settings, use the scroll
any settings press [OK] button.

To exit this menu at anytime, press [EXIT] button.

buttons. To confi rm

Contrast

Switch the balance between black and white

Brightness

Increase or decrease the brightness of the picture

Saturation

Increase or decrease the saturation of the picture

Sharpness

Increase or decrease the sharpness of the picture

Colour Temperature

• Normal - Default settings

• Warm - Increases red within the picture

• Cool - Increases blue within the picture

22

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:22User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:22 10/02/2015 10:34:4510/02/2015 10:34:45

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Picture Menu

Aspect Ratio

Within the UK the picture format varies depending
on the channel/broadcast. There are a number of
different options to best meet your needs

• Point2Point

Automatically displays the best picture format. So
the picture is in the correct position. May have
black lines at the top/bottom and/or sides.

• 4:3 - Displays the 4:3 picture in its original size.
Side bars are shown to fi ll the 16:9 screen

• 16:9 - Fills the screen with a regular 16:9 signal
and 4:3 will stretch to fi ll the screen

• Original - Will display the picture from the
broadcaster without any change

Noise Reduction

• Off - Turns noise reduction off

• Low - Minor system adjustment

• Middle - Medium system adjustments

• High - Maximum system adjustments

• 14:9 - Displays the 14:9 picture in the correct
proportion. As a result side bars are shown on
the screen

• Zoom1 and Zoom 2 - The picture is the correct
proportion but zoomed in to fi ll the screen

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:23User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:23 10/02/2015 10:34:4610/02/2015 10:34:46

23

Sound Menu

Sound Mode

• Standard - Default settings

• Music - Emphasises music over voices

• Movie - Provides live and full sound for movies

• Sports - Emphasises sound for sports

• Personal - Selects your personal sound settings

Treble

To adjust the amount of high frequency within
the sound

Bass

To adjust the amount of low frequency within
the sound

Balance

To switch the sound between the left and right
speakers

Auto Volume Level (AVL)

When ‘on’ is selected, the volume will stay at a
constant level regardless of input/source

DTS TruSurround

• Off - Off

• On - DTS TruSurround™ creates an immersive,
feature-rich surround sound experience from two
speakers, complete with
rich bass, high frequency detail and clear dialog

Digital Output

• Off - Off

• Auto - Selects the best settings automatically

• PCM - Select this option if you are connecting
to a Stereo Hi-fi via coax cable (Pulse-code
modulation (PCM) is a digital representation of an
analogue signal)

AD switch

(Audio Description is a service available on certain
programmes. It provides a description of what is
happening during the selected programme for a
person who is visually impaired)

AD Volume

This allows the user to increase and decrease the
AD (Audio Description) volume level.

Speaker Delay

Enables the user to adjust setting to sync picture
and audio

SPDIF Delay

Enables the user to adjust setting to sync picture
and audio for external sound devices

Tip: Treble and bass levels can only be adjusted
when the sound mode ‘Personal’ is selected.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.

24

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:24User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:24 10/02/2015 10:34:4610/02/2015 10:34:46

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Time Menu

Clock

Shows the date and time

Off Time

Allows you to set a specifi c time for your TV to
turn off

On Time

Allows you to set a specifi c time for your TV to turn
on, the channel it will then display, the source it will
be on and also the volume. This function can then be
toggled to repeat every day or a certain day.

To access this menu, press [MENU] button on the
remote control and scroll right.
To enter a menu press [OK]

If you wish to make changes to any of the default
settings, use the scroll
any settings press [OK] button.

To exit this menu at anytime, press [EXIT] button.

buttons. To confi rm

Sleep Timer

Lets you set the sleep timer so the television
automatically switches off after a set amount of time.
Off -> 10min -> 20min -> 30min -> 60min -> 90min ->
120min -> 180min -> 240min

OSD Timer

Lets you adjust the amount of time the On Screen
Menu stays on the screen before disappearing

Auto standby

Set Auto standby between 3 hours, 4 hours and
5 hours ( to turn off this function you must exit Home
Mode in the Picture Menu)

Time Zone

Change your current time zone

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:25User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:25 10/02/2015 10:34:4610/02/2015 10:34:46

25

Settings Menu

Language

Allows you to change the language of the menu

Audio language

Allows the user to change the audio language

Subtitle Language

Allows the user to change the subtitle language

Hearing Impaired

This allows the user to turn on the Hearing Impaired
function, this produces subtitles on the screen which
provide a description of what is happening during the
selected program.

Blue Screen

Changes the background when there is no input
between clear and a blue background (Only available
on some sources)

PVR File System

Allows you to view the format and performance of a
USB key

First Time Installation

Allows you to retune the television for all digital
channels, digital radio stations and analogue
channels

HDMI CEC (Consumer Electronic Control)

Allows HDMI devices to control each other and allows
the user to operate multiple devices with one remote
control. (only available with compatible devices)

LED status

Allows the user to switch the LED Power indicator
light ON or OFF, when the TV is being operated.
(When this option is set to OFF the LED Power
indicator light will fl ash when the remote control
is used)

Software Update (USB)
This menu lets you install the new software/fi rmware
onto the television. Further details of how to do this
will be issued with the fi rmware. Contact the helpline
or refer to the ‘product support’ section of the website

Restore Factory Default

This resets the menus to factory settings and will
erase all TV channels stored on the television

26

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:26User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:26 10/02/2015 10:34:4610/02/2015 10:34:46

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Lock Menu

System/Hotel Lock

Allows you to lock or unlock the menu. You will be
asked to enter a 4 digit password use the button to
quit the password input. Use the button to clear.
Default password is 0000

Change Password

Allows you to change the password

Channel Lock

Allows you to lock certain channels manually

Parental Guidance

Allows you to set the rating to block certain content
based on age information

TV Button Lock

Allows you to lock the buttons on the side of the
TV set

Default Source

Allows the user to set the default source. The default
source is the source the TV starts on when fi rst
switched on

Default Channel

Allows the user to set a channel as the default
channel on the Digital source. The default channel is
the channel the TV starts on when fi rst switched on

Max Volume

Allows you to adjust and set the maximum volume

Source Lock

Allows you to lock the source menu

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:27User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:27 10/02/2015 10:34:4610/02/2015 10:34:46

27

Network Configuration

For the network confi guration to work the TV will need to be connected to your home network via an Ethernet
cable, with these requirements in place the TV will connect to the network automatically.

If you are looking to change the confi guration to a static IP address this can be done by following the instructions
below.

1)

1) In the Network Menu you will need to highlight and select IP Confi g.

2) Once IP Confi g has been selected you can now choose between Auto or Manual.

AUTO - will automatically connect the TV to your home network (this is the default setting and is highly
recommended)

MANUAL - is an advanced option and allows you to manually change the IP, Netmask, Gateway and
DNS information.

3) If the manual option is chosen you will able to scroll down and manually change the IP, Netmask, Gateway and
DNS information.

2)

3)

4) 5) 6)

4) When the connection process is successful via the auto or manual option the “Connected” message will appear.

5) Network info allows you to view the IP, Netmask, Gateway and DNS information.

6) Network test allows you to test the connection and view IP, Netmask, Gateway and DNS information.

28

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:28User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:28 10/02/2015 10:34:4610/02/2015 10:34:46

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

7 Day TV Guide and Channel List

TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported
by the freeview channel). You can view the start and end time of all programmes and on all channels for the next 7
days and set reminders.

1) Press [TV GUIDE]. The following 7 Day TV Guide will appear.

7 Day TV GUIDE

1 BBC ONE Oxford

12:15 - 13:00 11 Dec 2014
Norfolk: Tim wonnacott and the teams are in Norfolk in search of great buys to take to auction.
Expertise comes from Catherine Southon and Jonathan Pratt, and Tim visits Ham House.

CHANNEL

1 BBC ONE Oxford

2 BBC TWO

3 ITV

4 Channel 4

5 Channel 5

6 ITV2

7 BBC THREE

9 BBC FOUR

Record

Move

12:00

Bargain Hunt

Daily Politics The Blue Planet

Let’s Do Christmas with Gino and Mel

Come Dine with Me

Three Wise Women

Prev. Day

Info. Exit.

Info

13:00 13:30Now

BBC News at One South...

Jame...

Come Dine with Me

Coronation Street

This is BBC Three

This is BBC Four

Next Day

EXIT

11 Dec 2014 12: 58

ITV News & Weather

Come Dine...

5..

Home and Away

You’ve Been Framed! Royal...

Remind

OK

OK

2) Navigate through the menu using

You can now:
Record a programme by pressing RED (USB device must be connected)
View a previous day by pressing GREEN
View the next day by pressing YELLOW
Set a reminder by pressing BLUE

Lifestyle

Doctors

3) Press [EXIT] to exit the 7 day TV Guide.

Channel List

To view the channel list, please ensure that the TV is set to either the analogue or digital source and
no menus or TV notifi cations are displayed.

1) Press [OK] on the remote control and the
channel list menu will appear.

2) Scroll through the channel list by using buttons then
press [OK] to view the channel that is currently highlighted.

3) Press [EXIT] to exit the channel list.

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:29User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:29 10/02/2015 10:34:4610/02/2015 10:34:46

29

USB Record - Digital / Freeview Mode

USB Record – Digital/Freeview Mode

Built into this television is a USB record facility. This function is available in Digital/Freeview mode when used in
conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are as follows:

• Pause live TV and then playback, fast forward and rewind (up to live TV)

• One button record, if you decide you want to record the current programme

• Easy programmable recording from the 7 day TV Guide

• Record TV and watch/listen back on your computer/laptop

Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable)

You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection
of tested and compatible memory sticks available to purchase directly from the helpline/web site.

Minimum Specifi cation - USB Memory Stick

If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear of this
user guide.

Pause Live TV (Time Shift)

Pausing Live TV is very simple.

- Press the play/pause button and the television will pause and the live content will be recorded. To resume

watching press play/pause again.

- Press fast forward to go forward in a recording (i.e. to skip adverts)

- Press fast rewind to go back in a recording (i.e. if you fast forwarded too far)

Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart time shift
you must press play/pause button.

Read Speed 20 MB/s (Mega Byte Per Second)

Write Speed 6 MB/s (Mega Byte Per Second)

One Button Record

At any point in time you may decide to record the current channel that you are watching. To do this you need to
press the red button highlighted below.

Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or record
one channel while the television is in standby mode.

Note: USB record function is only avilable in Digital/Freeview TV mode. Due to copyright laws and illegal
copying/recording it is not possible to record to/from any other input/output source.

30

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:30User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:30 10/02/2015 10:34:4610/02/2015 10:34:46

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

USB Mode / Media Player

USB mode offers playback of various different types
of content that you have saved on your USB Memory
Stick.

On switching to USB source the menu screen will
appear. The content will be divided into Photo,
Music, Movie and Text based on fi le type.

1) You can navigate through the menus using the
scroll buttons. To confi rm the item you wish
to play/view press [OK] button.

2) Select the drive you require.
(If your drive only has 1 partition you will only see
1 item).

3) You can now access the item. Press OK to view.

4) While viewing you control the item using (Fig A)

or by pressing ( i ) and using and (OK)

Tips:

• If you experience a playback issue, please
ensure the fi les being used are the correct format
(example - the picture plays but no sound).

1)

2)

3)

• USB extension cables are not recommended
as they can cause a reduction in picture/audio
quality and stoppages during play back of USB
content.

See technical specifi cation page for compatible
fi le types.

4)

Fig A

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:31User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:31 10/02/2015 10:34:4610/02/2015 10:34:46

31

Using Your TV With a Sky Digital Set Top Box

Option 1) Connecting your TV to your Sky box
(when both the TV and Sky Box are located in the same room)

Depending on your Sky Box & TV model, connect either by SCART or HDMI
cables (available separately).

If connecting by SCART, select the ‘Input source’ on the TV as Composite/AV.

If connecting by HDMI, select the ‘Input source’ on the TV as HDMI (if the TV has
more than 1 HDMI port, ensure you select the input source to match the HDMI
numbered port on the rear of the TV).

If you wish to use your Sky remote to operate the TV’s functions, you will need a
Sky remote control (Revision 9 or later) and you will need to programme a 4 digit
code into it. See bottom of this page.

Sky Box

Option 2) Connecting your TV to your Sky box (when your Sky box is located in a different room to the TV)

Please note, if you are adding a ‘Magic Eye/TV Link’
to your system so that you can use your Sky remote
control to change the Sky channel in the room where
the 2nd TV is located, please refer to the instructions
included with the TV link/magic eye in order to
ensure the RF or RF2 output on your Sky box is
powered on. (The red LED light on the TV link/magic

HDMI cable or
SCART adapter

RF/COAX cable from
Sky Box to 2nd TV

Connect to the
Aerial/RF input
on the 2nd TV

eye will light up if the RF / RF2 output is correctly
set up) If you do not have the instructions that came
with the TV link/magic eye, instructions on how to do
it can be found on our web site.

Sky Box

Connect to RF
or RF2 output
on the Sky box

TV Link/Magic Eye
(optional)

HDMI cable or

SCART adapter

2nd TV in
another room

1) To tune the TV to the Sky box, on the 2nd TV, select the ‘Analogue’ input source.

2) Select the channel that you wish to store the Sky box/channel on. (If you do not use channels 1-5 because you

no longer have analogue terrestrial channels after digital switchover, you may choose to select channel 1 to store
the Sky box/channel, if you still have and use analogue channels 1-5, you may for example decide that channel 6 is
the best option for you)

3) Press the corresponding number on the remote control to select the desired analogue channel chosen as per

point 2 above.

4) On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue

Manual tuning (refer to the Tuning/Channel menu section of this user guide if necessary)

5) Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the

Sky box/channel is found, press ‘OK’ to store it.

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control

(Revision 9 or later) and you will need to programme a 4 digit code into it. Please see below.

Using a Sky Remote or a Universal Remote to operate your TV - Sky Remote Control, If you wish to use your

Sky remote to operate the basic functions of your TV, you need to programme a 4 digit code into it. Please note.
you will need the latest Sky Revision 9 remote control as this is the only version that includes the latest software/
fi rmware necessary to operate this model of TV. The code required for this television is 2134. If you wish to
upgrade/replace your existing Sky remote control to the latest version, you can do so on our web site.

Universal Remote Control, If you wish to use a Universal remote control to operate your TV, please refer to the web
site for a full list of codes. (Please note we only have codes for One for All branded remote controls, if you have an
alternative brand of Universal remote, please refer to the manufacturer for the code.)

32

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:32User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:32 10/02/2015 10:34:4710/02/2015 10:34:47

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

Frequently Asked Questions

General I would like to have

louder sound by
connecting additional
speakers.

General Why are some

options in the menu
unavailable and
greyed out.

General Can I stop my TV

turning off after
4hrs?

TV I have tuned in

Digital TV but I am
not receiving any or
all of the channels
and/or the channels I
receive are breaking
up.

1) Use the 3.5mm headphone output and a 3.5mm to phono cable
(available separately) to connect to an amplifi er/surround sound system.
Please note this will deactivate the TV’s built in speakers.

2) Connect a Digital Optical Audio cable from the TV’s Digital Optical
Audio output to your amplifi er/surround systems Digital Optical
Audio input.

Some options are only available in certain sources, i.e. HDMI, PC/VGA.
They are unavailable in the other sources where they have no affect.

Yes.
In the time settings menu, scroll down to Auto standby and select OFF.

1) Check you are in an area that can receive Freeview. Visit
www.freeview.co.uk

2) Check you are using an aerial that is able to receive a good digital
signal. In most cases, you will need an outdoor digital hi-gain/wideband
aerial. In areas that have excellent Freeview coverage, you may be
able to use a loft type aerial but it is highly likely that you will also need
to connect a booster between the back of the TV and the TV aerial wall
socket. Unfortunately, to receive a good enough digital signal, it is not
possible to use a portable/indoor type aerial. This may change once the
analogue signal is switched off in 2012 and the Digital signal strength is
increased.

TV I have re-tuned my

television but when
I switch it off it is not
storing the channels.

TV

VCR/DVD
Recorder

Game
Consoles

Freeview
HD

I cannot fi nd the
Freeview HD
channels

I have connected
the TV to my VCR or
DVD Recorder via
SCART but it is not
recording.

I have connected
my PS3 to the TV
via HDMI, but I am
not receiving any
pictures or sound on
my TV.

I cannot access all
Freeview channels

Complete a fi rst time installation, please refer to the set-up menu section
of the manual of how to do this.

Freeview HD channels found during tuning will be placed in channel
positions above 100. For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.

In addition to connecting via SCART, you should connect the aerial cable
from the wall socket to your VCR/DVD Recorder and another aerial cable
from the VCR/DVD Recorder to the TV.

1) Ensure the TVs source is on HDMI

2) Check your settings on your PS3 are as per the PS3 instruction

manual.

Some data channels for Freeview can only be obtained when the TV
receives an internet connection.

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:33User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:33 10/02/2015 10:34:4710/02/2015 10:34:47

33

Frequently Asked Questions

Game
Consoles

USB Mode I have inserted a

USB Mode Using a USB

USB
Record /
TV models
only

USB
Record /
TV models
only

I have connected
my Xbox 360 to the
TV via Component
Cables (Red, Green
& Blue) but I am not
receiving any sound.

USB Memory Key,
but the TV does not
recognise it.

portable hard drive.

I cannot change the
channel, access the
menu or use the red
button

When using the
USB to record the
picture ‘breaks up’
or experience loss of
sound.

Component cables only provide HD Pictures. For the sound you will need
to connect the Red & White audio cables on the Xbox to the Red & White
phono inputs on the rear of the TV. Please refer to the ‘Connections’
pages.

Ensure the USB Memory Key is formatted to type FAT32.

If you wish to use a portable hard drive larger than 32GB, please note
that it must be formatted to the FAT32 fi le system in order to operate on
this TV. Windows XP/Vista computers are only capable of formatting up
to 32GB, therefore, you will need a software programme/utility to format
larger hard drives. Please refer to the web site for more information.

During Time Shift you cannot change the channel, access the menu or
use the red button

Check the USB Memory Stick meets the minimum requirements of Read
Speed - 20 MB/s (Mega Byte Per Second), Write Speed - 6 MB/s (Mega
Byte Per Second)

System
Lock

4k UHD How do I get the

4k UHD I have downloaded

4k UHD What does

Sound What can I do If the

I have changed the
password on the
television and now
forgotten it.

best 4K picture on
my TV.

UHD video content
to USB, but it will
not play via the USB
port.

Upscaling mean?

sound and picture
are not in time?

There is a master password of 4711, to gain access to the TV menu and
reset the normal password.

You must have a 4K device connected to the TV Via a HDMI cable and
UHD content.

The USB port will display the maximum resolution of 1920x1080 therefore
4K content is not compatible via USB.

Please refer to the ‘Ultra High Defi nition 4K/2K TV Information’ page in
this user guide.

In the Sound Menu adjust the Speaker Delay option until the sound and
picture are aligned.

Note:
Supplier may change TV software and on screen graphics without warning

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:34User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:34 10/02/2015 10:34:4710/02/2015 10:34:47

Technical Specification

Product Fiche

Supplier

Model ID

Energy effi ency class A

Visible screen size (diagonal) 102 cm / 40 inches

On mode model average power consumption 60 W

Annual energy consumption *1 88 kWh

Standby power consumption *2 <0.5 W

Off mode power consumption

Screen resolution 3840 (H) x 2160 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption
will depend on how the television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.

Additional Technical Information

RF

Video Inputs 4 x HDMI, 1 x USB, 1 x SCART, 1 x RJ45 (Ethernet), 1 x Mini Component/YPbPr,

1 x Mini Composite/Video & L/R Audio shared for Composite/Video & Component/YPbPr

Sound Outputs 1 x Digital Optical Audio output, 1 x output for headphones

Speaker / Amplifi er Watts (RMS) 2 x 10W / 2 x 8W

Dimensions including stand (mm)

Net weight

Energy Consumption Info

Voltage and power consumption

Wallmounting VESA

75 ohm Antenna / Analog / DVB

60 / 75 / 90W (ecomode/standard/max)

Bush

40/402UHD

0 W

897W x 570H x 210D

13.5kg

110-240v 50 / 60Hz

EEI - A (Energy Rating)

200 x 200 (mm)

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:35User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:35 10/02/2015 10:34:4710/02/2015 10:34:47

35

Technical Specification

Compatible fi les in USB Mode

Media File Ext.

.mpg/.mpeg

/.dat

.ts/.trp/.tp/.

m2ts

.vob MPEG-2

.mp4

.rm/.rmvb Rm codec

Movie

Music

Photo

.mkv

.avi

Motion JPEG JPEG

.asf,wmv VC1

.flv/.swf

.mp3 --

.wma/.asf --

.ogg -- OGG Sample Rate: ~48KHz

.m4a/.aac -- AAC HEAAC

.jpg/

.jpeg

.bmp BMP

.png

Video Decoder

Video Audio

MPEG-1, MPEG-2

MPEG-2, H.264,VC1,AVS

MPEG-4, Xvid, H.264

MPEG-1, MPEG-2, MPEG-4,

H.264

MPEG-2, MPEG-4,

Xvid, H.264

H.264, AVC, Sorenson

H.263

Progressive JPEG Max Resolution: 1024×768

Baseline JPEG

Non-Interlaced

Interlaced Max Resolution: 1200×800

MP3, WMA,AAC,

LPCM,DTS(DMP)，

IMA-aDPCM/MS-A

DPCM,LBR(cook),

G711A/mu-law

MPEG1/2 (Layer1，

Layer2，Layer3)

WMA

WMA pro

Remark

Max Solution: 1920×1080

Max Data Rate: 40 Mbps

Max Solution: 640×480

Max Data Rate: 10 Mbps

Max Solution: 1920×1080

Max Data Rate: 40 Mbps

Sample

Rate: 16KHz~48KHz

BitRate: 32K~448Kbps

BitRate: 128Kbps~320Kbps

Sampling rate : 8KHz-48KHz

BitRate: <768Kbps

Sampling rate : ~96KHz

Sample Rate: 8K~48KHz

Bit Rate: 24K~384Kbps

Max Resolution:

1920×8×1088×8

Max Resolution:

9600×6400

Max Resolution:

9600×6400

36

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:36User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:36 10/02/2015 10:34:4710/02/2015 10:34:47

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:37User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:37 10/02/2015 10:34:4710/02/2015 10:34:47

37

38

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:38User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:38 10/02/2015 10:34:4710/02/2015 10:34:47

For any help concerning set up and use of your TV please call the Customer Helpline on page 3

BUS/MAN/0019

User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:39User Guide Bush - 40-402Z-BS-5B2-U1GKUPS-UK BUS-MAN-0019.indd Sec1:39 10/02/2015 10:34:4710/02/2015 10:34:47