Bush 311010 Instruction manual

Instruction manual

311010

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

You’ll soon be enjoying your new LED Speaker.

It all begins here, with your instructions. Don’t worry, there’s
nothing too technical coming up. Just simple, step-by-step
guidance to get you up and running quickly. Sound good? Then
let’s get started.

Help and Guidance

We’re here to help you get the most from your LED Speaker. Should you require any
guidance, a simple solution can often be found online at:

www.argos-support.co.uk

If you still require further assistance, call one of our experts on 0345 600 3021.

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.

Contents

Safety information

1

Safety information 6

Getting to know your LED Speaker

2

Ready? Let’s begin 10

Accessories 10

Initial set-up 13

Change the mode 13

Connect to a Bluetooth device 13

Using your LED Speaker

3

Adjusting the volume 14

Bluetooth mode 18

Listening to Music/Audio using Bluetooth 18

LED light display 18

Change the brightness 19

Using as a Mobile handsfree speakerphone 19

Aux in mode 20

Other information

4

Technical specification 24

Product support

5

Troubleshooting 28

Help and assistance 29

Disposal 30

Guarantee 31

3

This page is left intentionally blank

1Safety information

Safety information

Important - Please read these instructions fully before
installing or operating

Safety information

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

General safety information

Keep the product and all its parts out of reach of small children.

This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning the use of the appliance by a person
responsible for their safety.

• Do not attempt to open the product. This product does not contain any user

serviceable parts. Unauthorised handling of the device may damage it and will void
your warranty.

• Do not use your LED Speaker near emergency/intensive care medical equipment; if

you have a pacemaker fitted or during an electrical storm.

• To avoid possible hearing damage, do not listen to this LED Speaker at high
volume levels for long periods of time. Always keep the volume within
reasonable limits.

Power source

Only use the USB charging cable that came with the product. Using an unauthorised
charging cable will invalidate your guarantee and may irrecoverably damage the product.

Please charge the integral lithium battery in your LED speaker at least once a month, to
prevent damage to and prolong the life of the lithium battery.

Positioning the LED Speaker

It is important that you consider carefully in advance where your LED Speaker will be
situated and make sure that it is:

• on a flat and stable surface.

• at least 1 metre away from other electrical appliances to avoid interference.

• where it will be in range of the connected or ‘paired’ bluetooth device (e.g. iPod/
iPhone/iPad/Android/other phone/computer, which is about 10 metres or less (33 feet
or less) in line of sight.

6

Safety information

Important - Please read these instructions fully before
installing or operating

Safety information

section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021

• Never place your LED Speaker directly onto antique or polished surfaces.

Moisture and water

• Do not leave it in low temperatures as moisture can form inside the product, which

may damage the circuit board.

Ventilation

• Do not block or cover slots, holes or openings on the product by placing on soft

furnishings such as carpets, rugs or beds as these are provided for functionality and/or
ventilation to ensure safe operation of the product.

Heat sources and flames

• Do not leave it in high temperatures as electronic devices and plastic parts may warp

in heat..

7

This page is left intentionally blank

Getting to know your LED

Speaker

2

Getting to know your LED Speaker

You’ll be up and running in no time

Getting to know your LED Speaker

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

Ready? Let’s begin...

Please read these instructions carefully. They contain important information which will
help you get the best from your product and ensure safe and correct installation and
operation.

If you require any further assistance, our technical experts are happy to help. For full
details, refer to the product support section at the end of these instructions.

Accessories

1. The following accessories are included with your LED Speaker:

Micro USB cable 3.5mm audio cable

Hanging clip

Fig 1.

10